Cationic (tripyrrinato)palladium(II) complexes

The formation of cationic palladium(II)complexes [TrpyPd^II]⁺X⁻ by salt metathesis of the respective trifluoroacetates with different salts of weakly coordinating anions X⁻ was investigated. With non-hydrolizable counterions, cationic mono- and dinuclear complexes are observed depending on the nature of the anion X⁻ and the solvent. The mononuclear cations, which are only formed with X = BAr^F, most probably carry a weakly bound molecule of dichloromethane at the fourth coordination site of Pd^II. When treated with diazoalkanes, only these are sufficiently reactive to form carbene complexes. Four- and five coordinate Lewis base adducts [TrpyPd^IIL]⁺ with L = CH₃NC, tBuNH₂, PMe₃, PEt₃ and PiPr₃ and [TrpyPd^IIL₂]⁺ with L = PMe₃ were prepared from the mononuclear cations [TrpyPd^II]⁺BAr^F−. From structural studies it becomes apparent, that the formation of stable five coordinate Pd^II species is restricted to medium size ligands and depends on the delicate balance between the steric influence of L and the strain, which is induced on the TrpyPd^II unit.     

Dy(3+) and Mn(2+) emission in fluoride- and chloride-based Na(3) (SO(4) )X (X = F or Cl) phosphors

In the present study, Na₃(SO₄)X (X = F or Cl) halosulphate phosphors have been synthesized by the solid‐state diffusion method. The phase formation of the compounds Na₃(SO₄)F and Na₃(SO₄)Cl were confirmed by X‐ray powder diffraction (XRD) measurement. Photoluminescence (PL) excitation spectrum measurement of Na₃(SO₄)F:Ce³⁺ and Na₃(SO₄)Cl:Ce³⁺ shows this phosphor can be efficiently excited by near‐ultraviolet (UV) light and presents a dominant luminescence band centred at 341 nm for Ce³⁺, which is responsible for energy transfer to Dy³⁺and Mn²⁺ ions. The efficient Ce³⁺ → Dy³⁺ energy transfer in Na₃(SO₄)F and Na₃(SO₄)Cl under UV wavelength was observed due to ⁴ F_9/2 to ⁶H_15/2 and ⁶H_13/2 level, while Ce³⁺ → Mn²⁺ was observed due to ⁴ T₁ state to ⁶A₁. The purpose of the present study is to develop and understanding the photoluminescence properties of Ce³⁺‐, Dy³⁺‐ and Mn²⁺‐doped fluoride and chloride Na₃(SO₄)X (X = F or Cl) luminescent material, which can be the efficient phosphors in many applications, such as scintillation applications, TL dosimetry and the lamp industry, etc. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and properties of trinuclear polypyridyl complexes Ru(II)-Co(II)-Ru(II) and Ru(II)-Co(III)-Ru(II): Their photoinduced interconversion

The trinuclear [{Ru^II(bpy)₂(bpy-terpy)}₂Co^II]⁶⁺ complex (1⁶⁺) in which a Co(II)-bis-terpyridine-like centre is covalently linked to two Ru(II)-tris-bipyridine-like moieties by a bridging bipyridine-terpyridine ligand has been synthesised and characterised. Its electrochemical, photophysical and photochemical properties have been investigated in CH₃CN. The cyclic voltammetry exhibits two successive reversible oxidation processes, corresponding to the Co^III/Co^II and Ru^III/Ru^II redox couples at E_1/2 = −0.06 and 0.91 V vs Ag/Ag⁺ 10 mM, respectively. The one-electron oxidized form of the complex, [{Ru^II(bpy)₂(bpy-terpy)}₂Co^III]⁷⁺ (1⁷⁺) obtained after exhaustive electrolysis carried out at 0.2 V is fully stable. 1⁶⁺ and 1⁷⁺ are only poorly luminescent, indicating that the covalent linkage of the Ru(II)-tris-bipyridine centre to the cobalt subunit leads to a strong quenching of the Ru^II excited state by an intramolecular process. Luminescence lifetime experiments carried out at different temperatures indicate that the transfer is more efficient for 1⁷⁺ compare to 1⁶⁺ due to lower activation energy. Continuous irradiation of 1⁷⁺ performed at 405 nm in the presence of P(Ph)₃ acting as sacrificial electron donor leads to its quantitative reduction into 1⁶⁺, whereas similar experiment starting from 1⁶⁺ with a sulfonium salt as sacrificial electron acceptor converts 1⁶⁺ into 1⁷⁺ with a slower rate and a maximum yield of 80%. These photoinduced electron transfers were followed by UV-Visible spectroscopy and compared with those obtained with a simple mixture of both mononuclear parent complexes i.e. [Ru^II(bpy)₃]²⁺ and [Co^II(tolyl-terpy)₂]²⁺ or [Co^III(tolyl-terpy)₂]³⁺ (tolyl-terpy = 4′-(4-methylphenyl)-2,2′:6′,2′′-terpyridine).     

The interaction of methylcobalamin with tetracyanoplatinate(II), tetrathiocyanoplatinate(II) and tetrachloroplatinate(II)

The interactions of methylcobalamin (CH₃-B₁₂) with Pt(CN)₄^2?, PtCl₄^2?, and Pt(SCN)₄^2? in aqueous solution were studied by UV-visible and ¹H NMR spectroscopy. Together with earlier results on the mechanism of the Pt(IV)-dependent methyl-transfer reaction from CH₃-B₁₂ to Pt(II), these studies suggest at least three Pt binding sites on CH₃-B₁₂. One site, which is occupied by all three complexes (K₁ = 4 X 10³ M^?1 for Pt(CN)₄^2? and 3 X 10³ M^?1 for PtCl₄^2?), is located on the CoCH₃ side of the corrin macrocycle, and is involved in the methyl-transfer process in the presence of a Pt(IV) complex. An additional site for Pt(SCN)₄^2? is the N-3 of the benzimidazole group, resulting in dissociation of this group from the cobalt. An additional site for Pt(CN)₄^2? has a binding constant of 16 M^1? and ¹H NMR changes indicate perturbation but not dissociation of the benzimidazole group. Only the first interaction is discerned for PtCl₄^2?.     

Synthesis, structural studies and solubility properties of zinc(II), nickel(II) and copper(II) complexes of bulky tris(triazolyl)borate ligands

Tris(triazolyl)borate (Ttz) ligands are sterically similar to tris(pyrazolyl)borate (Tp) but complexes of Ttz show improved solubility in water and alcohols due to their propensity for forming hydrogen bonds. Recently developed bulky tris(triazolyl)borate ligands can produce four and five coordinate transition metal complexes and serve as models for enzyme active sites in an aqueous environment. Herein we report the synthesis of such complexes, i.e. (Ttz^tBu,Me)ZnCl, (Ttz^tBu,Me)ZnBr, (Ttz^tBu,Me)NiCl, and (Ttz^tBu,Me)CuCl, which were analyzed by X-ray crystallographic and spectroscopic methods [Ttz^tBu,Me = tris(3-t-butyl-5-methyl-1,2,4-triazolyl)borate]. (Ttz^tBu,Me)ZnCl crystallizes as two different polymorphs with cubic and monoclinic symmetry. Both polymorphs of (Ttz^tBu,Me)ZnCl and (Ttz^tBu,Me)ZnBr have tetrahedral zinc atoms whereas the geometries at the metal in (Ttz^tBu,Me)NiCl and (Ttz^tBu,Me)CuCl are distorted tetrahedral. All complexes are methanol soluble and they also dissolve in methanol/water mixtures with up to 60% water.     

Conformational preferences of modified nucleoside N(2)-methylguanosine (m(2)G) and its derivative N(2), N(2)-dimethylguanosine (m(2)(2)G) occur at 26th position (hinge region) in tRNA

Conformational preferences of the modified nucleosides N²-methylguanosine (m²G) and N², N²-dimethylguanosine (m₂²G) have been studied theoretically by using quantum chemical perturbative configuration interaction with localized orbitals (PCILO) method. Automated complete geometry optimization using semiempirical quantum chemical RM1, along with ab initio molecular orbital Hartree–Fock (HF-SCF), and density functional theory (DFT) calculations has also been made to compare the salient features. Single-point energy calculation studies have been made on various models of m²G26:C/A/U44 and m₂²G26:C/A/U44. The glycosyl torsion angle prefers “syn” (χ = 286°) conformation for m²G and m₂²G molecules. These conformations are stabilized by N(3)–HC2′ and N(3)–HC3′ by replacing weak interaction between O5′–HC(8). The N²-methyl substituent of (m²G26) prefers “proximal” or s-trans conformation. It may also prefer “distal” or s-cis conformation that allows base pairing with A/U44 instead of C at the hinge region. Thus, N²-methyl group of m²G may have energetically two stable s-trans m²G:C/A/U or s-cis m²G:A/U rotamers. This could be because of free rotations around C–N bond. Similarly, N², N²-dimethyl substituent of (m₂²G) prefers “distal” conformation that may allow base pairing with A/U instead of C at 44th position. Such orientations of m²G and m₂²G could play an important role in base-stacking interactions at the hinge region of tRNA during protein biosynthesis process.     

Spectroscopic investigations of Er(3+) :CdO-Bi(2) O(3) -B(2) O(3) glasses

This article reports on the optical properties of Er³⁺ ions doped CdO–Bi₂O₃–B₂O₃ (CdBiB) glasses. The materials were characterized by optical absorption and emission spectra. By using Judd–Ofelt theory, the intensity parameters Ω_λ (λ = 2, 4, 6) and also oscillatory strengths were calculated from the absorption spectra. The results were used to compute the radiative properties of Er³⁺:CdBiB glasses. The concentration quenching and energy transfer from Yb³⁺–Er³⁺ were explained. The stimulated emission cross‐section, full width at half maximum (FWHM) and FWHM × values are also calculated for all the Er³⁺:CdBiB glasses. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and characterisation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes [Ti(IV), Zr(IV), Hf(IV), La(III), Ce(III), Yb(III), Sn(II) and Fe(II)]

The preparation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes is described. These are of formula [M{η⁵-C₅H₄(BX)}Cl₃] [M = Ti and X = CAT (2a), CAT^t (2b) or CAT^tt (2c); X = CAT^tt and M = Zr (4a) or Hf (4b)], [M{η⁵-C₅H₄(BX)}₂Cl₂] [M = Zr, X = CAT (3a) or CAT^t (3c); or M = Hf, X = CAT (3b) or CAT^t (3d)], [M{(μ-η⁵-C₅H₃BCAT)₂ SiMe₂}Cl₂] [M = Zr (5a) or Hf (5b)], [M{η⁵-C₅H₃(BCAT)₂}Cl₃] [M = Zr (6a) or Hf (6b)], [M{η⁵-C₅H₄BCAT}₃(THF)] [M = La (7a), Ce (7b) or Yb (7c)], [Sn{η⁵-C₅ H₄(BCAT^t)}Cl](8) and [Fe{η⁵-C₅H₄(BCAT^t)}₂] (9). The abbreviations refer to BO₂C₆H₄-1,2 (BCAT) and the 4-Bu^t (BCAT^t) and the (BCAT^tt) analogues. The compounds 2a-9 have been characterised by microanalysis, multinuclear NMR and mass spectra. The single crystal X-ray structure of the lanthanum compound 7a is presented.     

Oxidation of (hydroxyethyl)ferrocene by [2-pyridylmethylbis(2-ethylthioethyl)/amine]copper(II)

A kinetic study of the oxidation of (hydroxyethyl)ferrocene (HEF) by [2-pyridylmethylbis(2-ethyl-thioethyl)ainine]copper(II) (Cu(pmas)²⁺) is reported, with the objective of documenting the influence of the two thioether sulfur ligands on the electron transfer rate. Both reactants exhibit a first-order dependence at pH 6, I = 0.1 M(NaNO₃); k(25°C) = 1.3 × 10⁴M⁻¹sec⁻¹, ΔH3 = 10.1 kcal/mole, ΔS3 = −6 eu. The apparent Cu(pmas)^2+/+ self-exchange electron transfer rate constant calculated from this reaction on the basis of relative Marcus theory (4.7 × 10¹M⁻¹ sec⁻¹) agrees well with previous findings on ferrocytochrome c, Fe(CN)₆⁴⁻, and Ru(NH₃)₅py²⁺ oxidations. Spectrophotometric titrations of Cu(pmas)²⁺ and Cu(tmpa)²⁺ (tmpa = tris(2-pyridylmethyl)amine) with azide ion showed that both Cu(pmas)N₃)⁺ (K_f1 = 3.1 × 10³M⁻¹) and Cu(pmas)(N₃)₂ (K_f2 = 3.5 × 10¹M⁻¹) but Cu(tmpa)(N₃)⁺ (K_f = 6.6 × 10²M⁻¹) are formed up to 0.15 M N₃⁻ (25°C, pH 6, I = 0.2 M), suggesting that a thioether sulfur atom is displaced in the uptake of a second N₃⁻ ion by Cu(pmas)(N₃)⁺. The effect of thioether sulfur displacement by azide ion on the HEF-Cu(pmas)²⁺ reaction rate may be understood entirely through the tendency of N₃⁻ to shift the position of the redox equilibrium towards the reactant side, without invoking any special role for the sulfur ligand in promoting electron transfer reactivity.     

Binding of Cu (II), Tb (III) and Fe (III) to chicken ovotransferrin

The kinetics of binding of Cu (II), Tb (III) and Fe(III) to ovotransferrin have been investigated using the stopped-flow technique. Rate constants for the second-order reaction, k ₊, were determined by monitoring the absorbance change upon formation of the metal-transferrin complex in time range of milliseconds to seconds. The N and C sites appeared to bind a particular metal ion with the same rate; thus, average formation rate constants k ₊ (average) were 2.4 × 10⁴ M^–1 s^–1 and 8.3 × 10⁴ M^–1 S ^–1 for Cu (II) and Tb (III) respectively. Site preference (N site for Cu (II) and C site for Tb (III)) is then mainly due to the difference in dissociation rate constant for the metals. Fe (III) binding from Fe-nitrilotriacetate complex to apo-ovotransferrin was found to be more rapid, giving an average formation rate constant k ₊ (average) of 5 × 10⁵ M^–1 s^–1, which was followed by a slow increase in absorbance at 465 nm. This slow process has an apparent rate constant in the range 3 s^–1 to 0.5 s^–1, depending upon the degree of Fe (III) saturation. The variation in the rate of the second phase is thought to reflect the difference in the rate of a conformational change for monoferric and diferric ovotransferrins. Monoferric ovotransferrin changes its conformation more rapidly (3.4s^–1) than diferric ovotransferrin (0.52 s^–1). A further absorbance decrease was observed over a period of several minutes; this could be assigned to release of NTA from the complex, as suggested by Honda et al. (1980).Abbreviations Tf ovotransferrin - NTA nitrilotriacetate Jichi Medical School, School of Nursing, Yakushiji 3311-159, Minamikawachi, Tochigi, 329-04 Japan     

Extraction properties for alkali metal picrates of macrocyclic trinuclear (p-cymene)ruthenium(II) and (pentamethylcyclopentadienyl)rhodium(III) complexes

The solvent extraction properties of macrocyclic trinuclear organometallic complexes, [(p-cymene)Ru(pyO₂)]₃ and [Cp^∗Rh(pyO₂)]₃, for Li⁺, Na⁺, and K⁺ picrates have been investigated in a dichloromethane-water system at 25 °C. The extraction rates of the alkali metal picrates with these macrocyclic complex ligands are unusually slow; the shaking times required to attain equilibrium are at least 1 h for [(p-cymene)Ru(pyO₂)]₃ and 20-40 h for [Cp^∗Rh(pyO₂)]₃. From analysis of the equilibrium data, the extraction constants (K_ex = [ML⁺A⁻]_o/[M⁺][L]_o[A⁻]; M⁺ = alkali metal ion, L = macrocyclic ligand, A⁻ = picrate ion, o = organic phase) have been determined. The log K_ex value varies in the sequences, Li⁺ (5.72) > Na⁺ (4.50) > K⁺ (2.88) for [(p-cymene)Ru(pyO₂)]₃ and Li⁺ (4.79) > Na⁺ (2.70) ≈ K⁺ (2.69) for [Cp^∗Rh(pyO₂)]₃. The K_ex values of 6,6-dibenzyl-14-crown-4 (DBz14C4), which is one of the best Li⁺-selective crown ethers, have also been determined for comparison. It is revealed that [Cp^∗Rh(pyO₂)]₃ is much superior to DBz14C4 both in the extractability for Li⁺ and the selectivity for Li⁺ over Na⁺.     

Anti-resorptive activity and pharmacokinetic study of N(1),N(1)-diisopropyl-N(2)-(diphenylphosphoryl)-2-(4-nitrophenyl)acetamidine

In vitro anti-resorptive activity, mechanism of action, pharmacokinetic profile and in vivo anti-resorptive activity of N¹,N¹-diisopropyl-N²-(diphenylphosphoryl)-2-(4-nitrophenyl)acetamidine (1) were evaluated.     

Efficient and precise measurement of H(alpha)-C(alpha), C(alpha)-C', C(alpha)-C(beta) and H(N)-N residual dipolar couplings from 2D H(N)-N correlation spectra

A suite of experiments are presented for the measurement of H–C, C–C, C–C and H^N–N couplings from uniformly ¹⁵N, ¹³C labeled proteins. Couplings are obtained from a series of intensity modulated two-dimensional H^N–N spectra equivalent to the common ¹H–¹⁵N–HSQC spectra, alleviating many overlap and assignment issues associated with other techniques. To illustrate the efficiency of this method, H–C, C–C, and H^N–N isotropic scalar couplings were determined for ubiquitin from data collected in less than 4.5 h, C–C data collection required 10 h. The resulting couplings were measured with an average error of ±0.06, ±0.05, ±0.04 and ±0.10 Hz, respectively. This study also shows H–C and C–C couplings, valuable because they provide orientation of bond vectors outside the peptide plane, can be measured in a uniform and precise way. Superior accuracy and precision to existing 3D measurements for C–C couplings and increased precision compared to IPAP measurements for H^N–N couplings are demonstrated. Minor modifications allow for acquisition of modulated H^N–C 2D spectra, which can yield additional well resolved peaks and significantly increase the number of measured RDCs for proteins with crowded ¹H–¹⁵N resonances.     

Non-covalent (iso)guanosine-based ionophores for alkali(ne earth) cations

Different (iso)guanosine-based self-assembled ionophores give distinctly different results in extraction experiments with alkali(ne earth) cations. A lipophilic guanosine derivative gives good extraction results for K⁺, Rb⁺, Ca²⁺, Sr²⁺, and Ba²⁺ and in competition experiments it clearly favors the divalent Sr²⁺ (and Ba²⁺) cations. 1,3-Alternate calix[4]arene tetraguanosine hardly shows any improvement in the extraction percentages compared to its reference compound 1,3-alternate calix[4]arene tetraamide. This indicates that one G-quartet does not provide efficient cation complexation under these conditions. In the case of the lipophilic isoguanosine derivative there is a cation size dependent affinity for the monovalent cations (Cs⁺ ? Rb⁺ ? K⁺), but not for the divalent cations (Ca²⁺ > Ba²⁺ > Sr²⁺ > Mg²⁺). In competition experiments the isoguanosine derivative, unlike guanosine, does not discriminate between monovalent and divalent cations, giving an almost equal extraction of Cs⁺ and Ba²⁺.     

Reactions of tetrabromoaurate(III) and dicyanodibromoaurate(III) with uracil

The reactions of AuBr^?₄ and Au(CN)₂Br^?₂ with uracil in water produce gold(I) and 5-bromouracil and/or 5-bromo-6-hydroxy-5,6-dihydrouracil. The observed kinetics of the reactions are consistent with a mechanism involving a fast redox pre-equilibrium followed by bromination of the pyrimidine (X^?= Br^? or CN^?):

The calculated equilibrium constant K = k₁/k_?1 is 1.6 × 10^?10 M for AuBr^?₄ and 1.7 × 10^?11 M for Au(CN)₂Br^?₂. Specific rates for the reduction of AuBr^?₄ are correspondingly greater than those for the reduction of Au(CN)₂Br^?₂.     

COPPER SORPTION AND RELEASE BY CYCLOTELLA MENEGHINIANA (BACILLARIOPHYCEAE) AND CHLAMYDOMONAS REINHARDTII (CHLOROPHYCEAE)1

Initial Cu⁺⁺ sorption by Cyclotella meneghiniana Kütz. (Cu⁺⁺-sensitive) and Chlamydomonas reinhardtii Dangeard (Cu⁺⁺-resistant) was rapid in the first 5 min of Cu⁺⁺ incubation with little sorption after 2 h. On a cell to cell basis, Cyclotella sorbed ca. five times more Cu⁺⁺ from the medium than Chlamydomonas. In MBL medium with EDTA Cyclotella and Chlamydomonas cells sorbed 21.0 and 4.41 nM Cu⁺⁺/10⁶ cells respectively in 6 h with 0.3 mg Cu⁺⁺/l in the medium. Proportionally similar quantities of Cu⁺⁺ were sorbed when the cells were Cu⁺⁺ incubated in MBL + citrate or filtered lake water. Cleaned cell walls of Cyclotella sorbed little Cu⁺⁺ (1.7 nM/10⁶ cells) as compared to living cells (17.5 nM Cu⁺⁺/10⁶ cells) in 3 h. Therefore, in living Cyclotella most of the Cu⁺⁺ taken up must be absorbed by the protoplasm or perhaps by the organic layer surrounding the silica wall. Cleaned cell walls of Chlamydomonas sorbed 3.5 nM Cu⁺⁺/10⁶ cells and living Chlamydomonas cells sorbed 2.6 nM Cu⁺⁺/10⁶ cells. This indicates that most of the Cu⁺⁺ sorbed by Chlamydomonas cells remained bound to the cell wall and probably did not readily enter into the protoplasm: When placed in Cu⁺⁺ free medium after Cu⁺⁺ incubation, Cyclotella and Chlamydomonas cells released 46 and 59% respectively of the Cu⁺⁺ sorbed.     

Kinetics of acid-catalysed dissociation of lead(II) and copper(II) complexes of ethylenebis(oxyethylenenitrilo)tetraacetic acid (EGTA)

The acid-catalysed dissociation rate constants for PbEGTA²⁻ and CuEGTA²⁻ complexes (where EGTA is ethylenebis(oxyethylenenitrilo) tetraacetic acid) were measured in acetic acid-acetate buffer medium (pH: 3.0–4.8) and perchloric acid solutions ([H⁺] = 0.05–0.15 M), respectively, at a constant ionic strength of 0.15 (NaClO₄). The rate laws shown by the lead(II) and copper(II) complexes are of the form, Rate = {k_d + k_H[H⁺]}[complex] and Rate = {k_d + k_H²[H⁺]²}[complex], respectively. Enthalpy and entropy of activation for acid-independent and acid-catalysed pathways for both the complexes were obtained by the temperature-dependence studies of resolved rate constants in the 16–45°C range. The rate of dissociation of PbEGTA²⁻ is not enhanced by increasing the concentration of acetate ion in the buffer, and the amount of total electrolyte in the reaction mixture has no pronounced effect on the dissociation rates of their the lead(II) or copper(II) complex. Attempts to study the kinetics of stepwise ligand unwrapping in the binuclear Cu₂EGTA complex were unsuccessful due to the extremely rapid dissociation of this complex to yield mononuclear CuEGTA²⁻.     

Bridge over troubled proline: assignment of intrinsically disordered proteins using (HCA)CON(CAN)H and (HCA)N(CA)CO(N)H experiments concomitantly with HNCO and i(HCA)CO(CA)NH

NMR spectroscopy is by far the most versatile and information rich technique to study intrinsically disordered proteins (IDPs). While NMR is able to offer residue level information on structure and dynamics, assignment of chemical shift resonances in IDPs is not a straightforward process. Consequently, numerous pulse sequences and assignment protocols have been developed during past several years, targeted especially for the assignment of IDPs, including experiments that employ H^N, H^α or ¹³C detection combined with two to six indirectly detected dimensions. Here we propose two new HN-detection based pulse sequences, (HCA)CON(CAN)H and (HCA)N(CA)CO(N)H, that provide correlations with ¹H^N(i ? 1), ¹³C′(i ? 1) and ¹⁵N(i), and ¹H^N(i + 1), ¹³C′(i) and ¹⁵N(i) frequencies, respectively. Most importantly, they offer sequential links across the proline bridges and enable filling the single proline gaps during the assignment. We show that the novel experiments can efficiently complement the information available from existing HNCO and intraresidual i(HCA)CO(CA)NH pulse sequences and their concomitant usage enabled >95 % assignment of backbone resonances in cytoplasmic tail of adenosine receptor A2A in comparison to 73 % complete assignment using the HNCO/i(HCA)CO(CA)NH data alone.     

A preparative study of some coronands and their complexation of silver(I), zinc(II), cadmium(II) and lead(II)

A study of the complexation of heavy metal ions by the coronands 3,12,20,29-tetraoxa-35,36-diazapentacyclo[29.3.1.1.^14,18.0^5,10.0^22,27]-hexatriaconta-1(35),5(10),6,8,14,16,18(36),22(27),23,25,31,33-dodecaene (1); 2,3,11,12-bis (4^′-methylbenzo)-1,4,10,13-tetrathia-7,16-dioxacyclo-octadeca-2,11-diene (2); 7,16-diaza-1,4,10,13-tetraoxa-2,3,11,12-dibenzocyclooctadeca-2,11-diene (3); 2-[19-(2-hydroxy-2-phenylethyl)-7,8,9,10, 18,19,20,21-octahydro-6H,17H-dibenzo[b,k][1,4,10,13,7,16]tetraoxadiazacyclooctadecin-8-yl]-1-phenyl-1-ethanol (4); 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane (5); and 2-[16-(2-hydroxy-2-phenylethyl)-1,4,10,13-tetraoxa-7,16-diazacyclo-octadecanyl]-1-phenyl-1-ethanol (6) is described. Coronands 1 and 3 were prepared by literature methods, improved methods were used to prepare 2, and 4 and 6 were prepared from 3 and 5 (obtained commercially), respectively. Potentiometric studies in N,N-dimethylformamide yielded (logK/dm³ mol⁻¹)=5.50, 6.49, 9.42 and 7.52 for [Ag · 1]⁺, [Ag · 2]⁺, [Ag · 5]⁺ and [Ag · 6]⁺, respectively; <2, <2, 4.30 and <2 for [Zn · 1]²⁺, [Zn · 2]²⁺, [Zn · 5]²⁺ and [Zn · 6]²⁺, respectively, <2, <2, 5.92 and >7.52 for [Cd · 1]²⁺, [Cd · 2]²⁺, [Cd · 5]²⁺, and [Cd · 6]²⁺, respectively, and 2.62, 2.38, 6.71 and >7.52 for [Pb · 1]²⁺, [Pb · 2]²⁺, [Pb · 5]²⁺, and [Pb · 6]²⁺, respectively. ESI-MS studies of the interactions of 1-6 with Ag⁺, Zn²⁺, Cd²⁺ and Pb²⁺ are also reported.