Purification and stability characteristics of an alkaline serine protease from a newly isolated Haloalkaliphilic bacterium sp. AH-6

An alkaline protease secreting Haloalkaliphilic bacterium (Gene bank accession number EU118361) was isolated from the Saurashtra Coast in Western India. The alkaline protease was purified by a single step chromatography on phenyl sepharose 6 FF with 28% yield. The molecular mass was 40 kDa as judged by SDS-PAGE. The enzyme displayed catalysis and stability over pH 8–13, optimally at 9–11. It was stable with 0–4 M NaCl and required 150 mM NaCl for optimum catalysis at 37 °C; however, the salt requirement for optimal catalysis increased with temperature. While crude enzyme was active at 25–80 °C (optimum at 50 °C), the purified enzyme had temperature optimum at 37 °C, which shifted to 80 °C in the presence of 2 M NaCl. The NaCl not only shifted the temperature profile but also enhanced the substrate affinity of the enzyme as reflected by the increase in the catalytic constant (K _cat). The enzyme was also calcium dependent and with 2 mM Ca⁺², the activity reached to maximum at 50 °C. The crude enzyme was highly thermostable (37–90 °C); however, the purified enzyme lost its stability above 50 °C and its half life was enhanced by 30 and sevenfold at 60 °C with 1 M NaCl and 50 mM Ca⁺², respectively. The activity of the enzyme was inhibited by PMSF, indicating its serine type. While the activity was slightly enhanced by Tween-80 (0.2%) and Triton X-100 (0.05%), it marginally decreased with SDS. In addition, the enzyme was highly stable with oxidizing-reducing agents and commercial detergents and was affected by metal ions to varying extent. The study assumes significance due to the enzyme stability under the dual extremities of pH and salt coupled with moderate thermal tolerance. Besides, the facts emerged on the enzyme stability would add to the limited information on this enzyme from Haloalkaliphilic bacteria.     

Purification and characterization of alkaline protease with novel properties from Bacillus cereus strain S8

Proteases are the hydrolytic enzymes which hydrolyzes peptide bond between proteins with paramount applications in pharmaceutical and industrial sector. Therefore production of proteases with efficient characteristics of biotechnological interest from novel strain is significant. Hence, in this study, an alkaline serine protease produced by Bacillus cereus strain S8 (MTCC NO 11901) was purified and characterized. The alkaline protease was purified by ammonium sulfate precipitation (50%), ion exchange (DEAE-Cellulose) and gel filtration (Sephadex G-100) chromatographic techniques. As a result of this purification, a protein with specific activity of 300U/mg protein was obtained with purification fold 17.04 and recovery percentage of 34.6%. The molecular weight of the purified protease was determined using SDS-PAGE under non-reducing (71?kDa) and reducing conditions (35?kDa and 22?kDa). Zymogram analysis revealed that proteolytic activity was only associated with 22?kDa. These results indicate that existence of the enzyme as dimer in its native state. The molecular weight of the protease (22?kDa) was also determined by gel filtration (Sephadex G-200) chromatography and it was calculated as 21.8?kDa. The optimum activity of the protease was observed at pH 10.0 and temperature 70?°C with great stability towards pH and temperature with casein as a specific substrate. The enzyme was completely inhibited by PMSF and TLCK indicating that it is a serine protease of trypsin type. The enzyme exhibits a great stability towards organic solvents, oxidizing and bleaching agents and it is negatively influenced by Li²⁺ and Co²⁺ metal ions. The purified protein was further characterized by Matrix Assisted Laser Desorption Ionization/Mass Spectroscopy (MALDI/MS) analysis which reveals that total number of amino acids is 208 with isoelectric point 9.52.     

Detergent-compatible,organic solvent-tolerant alkaline protease from Bacillus circulans MTCC 7942: Purification and characterization

Proteases are now recognized as the most indispensable industrial biocatalyst owing to their diverse microbial sources and innovative applications. In the present investigation, a thermostable, organic solvent-tolerant, alkaline serine protease from Bacillus circulans MTCC 7942, was purified and characterized. The protease was purified to 37-fold by a three-step purification scheme with 39% recovery. The optimum pH and temperature for protease was 10 and 60°C, respectively. The apparent molecular mass of the purified enzyme was 43 kD as revealed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The K_m and V_max values using casein-substrate were 3.1 mg/mL and 1.8 µmol/min, respectively. The protease remained stable in the presence of organic solvents with higher (>3.2) log P value (cyclohexane, n-octane, n-hexadecane, n-decane, and n-dodecane), as compared to organic solvents with lower (<3.2) log P value (acetone, butanol, benzene, chloroform, toluene). Remarkably, the protease showed profound stability even in the presence of organic solvents with less log P values (glycerol, dimethyl sulfate [DMSO], p-xylene), indicating the possibility of nonaqueous enzymatic applications. Also, protease activity was improved in the presence of metal ions (Ca²⁺, Mg²⁺, Mn²⁺); enhanced by biosurfactants; hardly affected by bleaching agents, oxidizing agents, and chemical surfactants; and stable in commercial detergents. In addition, a protease–detergent formulation effectively washed out egg and blood stains as compared to detergent alone. The protease was suitable for various commercial applications like processing of gelatinous film and as a compatible additive to detergent formulation with its operative utility in hard water.     

Purification and characterization of a propanol-tolerant neutral protease from Bacillus sp. ZG20

Abstract

A propanol-tolerant neutral protease was purified and characterized from Bacillus sp. ZG20 in this study. This protease was purified to homogeneity with a specific activity of 26,655?U/mg. The recovery rate and purification fold of the protease were 13.7% and 31.5, respectively. The SDS-PAGE results showed that the molecular weight of the protease was about 29?kDa. The optimal temperature and pH of the protease were 45?°C and 7.0, respectively. The protease exhibited a good thermal- and pH stability, and was tolerant to 50% propanol. Mg²⁺, Zn²⁺, K⁺, Na⁺ and Tween-80 could improve its activity. The calculated K_m and V_max values of the protease towards α-casein were 12.74?mg/mL and 28.57?µg/(min mL), respectively. This study lays a good foundation for the future use of the neutral protease from Bacillus sp. ZG20.     

Purification and characterization of two thermostable protease fractions from Bacillus megaterium

Protease enzyme from Bacillus megaterium was successively purified by ammonium sulfate precipitation, ion exchange chromatography on DEAE-cellulose and gel filtration chromatography on Sephadex G-200. The purification steps of protease resulted in the production of two protease fractions namely protease P1 and P2 with specific activities of 561.27 and 317.23 U mg^?1 of protein, respectively. The molecular weights of B. megaterium P1 and P2 were 28 and 25 KDa, respectively. The purified fractions P1 and P2 were rich in aspartic acid and serine. Relatively higher amounts of alanine, leucine, glycine, valine, thereonine valine and glutamic acid were also present. The maximum protease activities for both enzyme fractions were attained at 50 °C, pH 7.5, 1% of gelatine concentration and 0.5 enzyme concentrations. P1 and P2 fractions were more stable over pH 7.0–8.5 and able to prolong their thermal stability up to 80 °C. The effect of different inhibitors on the protease activity of both enzyme fractions was also studied. The enzyme was found to be serine active as it had been affected by lower concentrations of phenylmethylsulfonyl fluoride (PMSF). Complete dehairing of the enzyme-treated skin was achieved in 12 h, at room temperature.     

Laundry detergent compatibility of the alkaline protease from Bacillus cereus

The endogenous protease activity in various commercially available laundry detergents of international companies was studied. The maximum protease activity was found at 50 degrees C in pH range 10.5-11.0 in all the tested laundry detergents. The endogenous protease activity in the tested detergents retained up to 70% on incubation at 40 degrees C for 1 h, whereas less than 30% activity was only found on incubation at 50 degrees C for 1 h. The alkaline protease from an alkalophilic strain of Bacillus cereus was studied for its compatibility in commercial detergents. The cell free fermented broth from shake flask culture of the organism showed maximum activity at pH 10.5 and 50 degrees C. The protease from B. cereus showed much higher residual activity (more than 80%) on incubation with laundry detergents at 50 degrees C for 1 h or longer. The protease enzyme from B. cereus was found to be superior over the endogenous proteases present in the tested commercial laundry detergents in comparison to the enzyme stability during the washing at higher temperature, e.g., 40-50 degrees C.     

Stability of thermostable alkaline protease from Bacillus licheniformis RP1 in commercial solid laundry detergent formulations

The stability of crude extracellular protease produced by Bacillus licheniformis RP1, isolated from polluted water, in various solid laundry detergents was investigated. The enzyme had an optimum pH and temperature at pH 10.0–11.0 and 65–70 °C. Enzyme activity was inhibited by PMSF, suggesting that the preparation contains a serine-protease. The alkaline protease showed extreme stability towards non-ionic (5% Tween 20% and 5% Triton X-100) and anionic (0.5% SDS) surfactants, which retained 100% and above 73%, respectively, of its initial activity after preincubation 60 min at 40 °C.

The RP1 protease showed excellent stability and compatibility with a wide range of commercial solid detergents at temperatures from 40 to 50 °C, suggesting its further application in detergent industry. The enzyme retained 95% of its initial activity with Ariel followed by Axion (94%) then Dixan (93.5%) after preincubation 60 min at 40 °C in the presence of 7 mg/ml of detergents. In the presence of Nadhif and New Det, the enzyme retained about 83.5% of the original activity. The effects of additives such as maltodextrin, sucrose and PEG 4000 on the stability of the enzyme during spray-drying and during subsequent storage in New Det detergent were also examined. All additives tested enhanced stability of the enzyme.     

Enhanced production and characterization of a highly thermostable alkaline protease from Bacillus sp. P-2

An obligatory alkalophilic Bacillus sp. P-2, which produced a thermostable alkaline protease was isolated by selective screening from water samples. Protease production at 30 °C in static conditions was highest (66 U/ml) when glucose (1% w/v) was used with combination of yeast extract and peptone (0.25% w/v, each), in the basal medium. Protease production by Bacillus sp. P-2 was suppressed up to 90% when inorganic nitrogen sources were supplemented in the production medium. Among the various agro-byproducts used in different growth systems (solid state, submerged fermentation and biphasic system), wheat bran was found to be the best in terms of maximum enhancement of protease yield as compared to rice bran and sunflower seed cake. The protease was optimally active at pH 9.6, retaining more than 80% of its activity in the pH range of 7–10. The optimum temperature for maximum protease activity was 90 °C. The enzyme was stable at 90 °C for more than 1h and retained 95 and 37% of its activity at 99 °C and 121 °C, respectively, after 1 h. The half-life of protease at 121 °C was 47 min.     

Thermotolerant alkaline protease enzyme from Bacillus licheniformis A10: purification,characterization, effects of surfactants and organic solvents

In this study, the extracellular thermostable alkaline protease out of A10 strain was purified 1.38-fold with 9.44% efficiency through the ammonium sulfate precipitation-dialysis and DE52 anion exchange chromatography methods. The molecular weight of the enzyme in question along with sodium dodecyl sulfate-polyacrylamide gel electrophoresis was determined to be approximately 40.55?kDa, whereas the optimum pH and temperature ratings were identified as 9.0 and 70?°C, respectively. It was seen that the enzyme had remained stable between pH 7.5–10.5 range, protecting more than 90% of its activity in the wake of 1?h incubation at 60–70?°C. It was also observed that the enzyme enhanced its activity in the presence of Mg²⁺, Mn²⁺, K⁺, while Fe²⁺, Ni²⁺, Zn²⁺, Ag^+?and Co^2+? decreased the activity. Ca²⁺, however, did not cause any change in the activity. The enzyme was seen to have been totally inhibited by phenylmethylsulfonyl fluoride, therefore, proved to be a serine alkaline protease.     

Purification and characterization of a serine alkaline protease from Bacillus clausii GMBAE 42

An extracellular serine alkaline protease of Bacillus clausii GMBAE 42 was produced in protein-rich medium in shake-flask cultures for 3 days at pH 10.5 and 37°C. Highest alkaline protease activity was observed in the late stationary phase of cell cultivation. The enzyme was purified 16-fold from culture filtrate by DEAE-cellulose chromatography followed by (NH₄)₂SO₄ precipitation, with a yield of 58%. SDS-PAGE analysis revealed the molecular weight of the enzyme to be 26.50 kDa. The optimum temperature for enzyme activity was 60°C; however, it is shifted to 70°C after addition of 5 mM Ca²⁺ ions. The enzyme was stable between 30 and 40°C for 2 h at pH 10.5; only 14% activity loss was observed at 50°C. The optimal pH of the enzyme was 11.3. The enzyme was also stable in the pH 9.0–12.2 range for 24 h at 30°C; however, activity losses of 38% and 76% were observed at pH values of 12.7 and 13.0, respectively. The activation energy of Hammarsten casein hydrolysis by the purified enzyme was 10.59 kcal mol⁻¹ (44.30 kJ mol⁻¹). The enzyme was stable in the presence of the 1% (w/v) Tween-20, Tween-40,Tween-60, Tween-80, and 0.2% (w/v) SDS for 1 h at 30°C and pH 10.5. Only 10% activity loss was observed with 1% sodium perborate under the same conditions. The enzyme was not inhibited by iodoacetate, ethylacetimidate, phenylglyoxal, iodoacetimidate, n-ethylmaleimidate, n-bromosuccinimide, diethylpyrocarbonate or n-ethyl-5-phenyl-iso-xazolium-3′-sulfonate. Its complete inhibition by phenylmethanesulfonylfluoride and relatively high k _cat value for N-Suc-Ala-Ala-Pro-Phe-pNA hydrolysis indicates that the enzyme is a chymotrypsin-like serine protease. K _m and k _cat values were estimated at 0.655 μM N-Suc-Ala-Ala-Pro-Phe-pNA and 4.21×10³ min⁻¹, respectively.     

Bleach-stable, alkaline protease from Bacillus sp.

A bleach-stable, thermotolerant, alkaline protease for detergent formulation from a newly isolated Bacillus SB5 is reported. Most (85%) activity of the enzyme was retained in the presence of 10% (v/v) H2O2 and 1% SDS (w/v) at 40°C, after 1 h. The enzyme was optimal at pH 10 and 60°C to 70°C. Enzyme activity was enhanced 30 to 80% in presence of ionic and non-ionic detergents, surfactants and commercial detergents or bleach.     

Purification and characterization of a salinity induced alkaline protease from isolated spinach chloroplasts

In cynobacteria and higher plants, salinity is known to inhibit the activity of several enzymes involved in photosynthesis and hence decreases the overall photosynthetic rate. This gave us an impetus to search for a protease, which may be involved in the turnover of non-functional enzymes produced under salinity stress. Taking the possible changes in pH gradient of the chloroplast under consideration, we have tried to identify a protease, which is induced under salinity and characterized it as an alkaline protease using spinach (Spinacia oleracea) leaves as a model system. The HIC-HPLC purified homogeneous alkaline serine protease from the isolated spinach chloroplasts had two subunits of molecular weight 63 and 32 kDa. The enzyme was maximally active at pH 8.5 and 50°C. The enzyme showed the property to hydrolyze the synthetic substrate like azocaesin and had sufficient proteolytic activity in gelatin bound native PAGE. The enzyme activity was also dependent upon the presence of divalent cations and reduced environment. The active site residues were identified and the homogeneous alkaline serine protease had cysteine, lysine and tryptophan residues at its active site.     

Characterization and wash performance analysis of an SDS-stable alkaline protease from a Bacillus sp.

An alkaline, SDS-stable protease optimally active at pH 11 from a Bacillus sp. RGR-14 was produced in a complex medium containing soybean meal, starch and calcium carbonate. The protease was active over a wide temperature range of 20–80 °C with major activity between 45 and 70 °C. The protease was completely stable for 1 h in 0.1% SDS and retained 70% of its activity in the presence of 0.5% SDS after 1 h of incubation. The enzyme was active in presence of surfactants (ionic and non-ionic) with 29% enhancement in activity in Tween-85 and was also stable in various oxidizing agents with 100 and 60% activity in presence of 1% sodium perborate and 1% H₂O₂, respectively. The enzyme was also compatible with commercial detergents (1% w/v) such as Surf, Ariel, Wheel, Fena and Nirma, retaining more than 70% activity in all the detergents after 1 h. Wash performance analysis of grass and blood stains on cotton fabric showed an increase in reflectance (14 and 25% with grass and blood stains, respectively) after enzyme treatment. However, enzyme in conjunction with detergent proved best, with a maximum reflectance change of 46 and 34% for grass and blood stain removal, respectively, at 45 °C. Stain removal was also effective after protease treatment at 25 and 60 °C.     

Purification and characterization of an alkaline cellulase from a newly isolated alkalophilic Bacillus sp. HSH-810

An alkaline cellulase from Bacillus sp. HSH-810 was purified 8.7-fold with a 30% yield and a specific activity of 71 U mg^–1 protein. It was optimally active at pH 10 and 50 °C and was stable from pH 6 to 10 with more than 60% activity remaining after heating at 60 °C for 60 min. The molecular mass of cellulase was 80 kDa. It was inhibited by 50% by Fe³⁺ (1 mM) and Mn²⁺ (0.1 mM) but was relatively insensitive to Hg²⁺ and Pb²⁺ at 1 mM.Revisions requested: 8 October 2004/1 December 2004; Revisions received 29 November 2004/5 January 2005     

极端嗜盐古生菌(Natrinema sp.)R6-5胞外嗜盐蛋白酶的纯化和性质研究

采用bacitracin-Sepharose 4B亲和层析的方法得到凝胶电泳均一的来自极端嗜盐古生菌(Natrinema sp.)R6-5的胞外嗜盐蛋白酶。经SDS-PAGE分析该酶亚基分子量为62kDa。PMSF对它的活性完全抑制,表明它是一种丝氨酸蛋白酶,该酶反应的最适NaCl浓度为3mol/L,最适温度为45℃,最适pH值为8.0。在高盐条件下能维持高活性并十分稳定,具有重要的潜在应用价值。     

短小芽孢杆菌2080碱性蛋白酶的纯化与性质

短小芽孢杆菌（Bacillus pumilus）2080碱性蛋白酶的发酵液经超滤、硫酸铵沉淀、CM Sepharose Fast Flow和DEAE Sepharose Fast Flow离子交换层析得到了纯化的组分。SDS-PAGE电泳分析显示其分子量约为61kDa。酶学性质研究表明,该纯化酶的最适pH为10．5,最适温度为50℃。     

芽孢杆菌N1碱性蛋白酶的克隆表达及酶学性质

【背景】蛋白酶广泛应用于制革行业中,酶法脱毛对环境污染较小,但蛋白酶对化学试剂的不稳定性及胶原降解活性限制了其工业应用。【目的】克隆芽孢杆菌(Bacillussp.)N1基因组的碱性蛋白酶基因,实现其在大肠杆菌中的异源表达,并对重组酶酶学性质及脱毛作用进行研究。【方法】利用基因组文库法克隆获得蛋白酶基因aprG,构建重组大肠杆菌(Escherichiacoli)BL21(DE3)pLysS/pET-28a-aprG。异丙基-β-D-硫代半乳糖苷(IPTG)诱导表达该重组酶,以福林酚显色法对其酶学性质进行研究,并将AprG作用于羊皮、兔皮和羽毛。【结果】克隆得到蛋白酶基因aprG,并实现其在大肠杆菌中的表达。重组酶AprG最适反应温度为50°C,最适反应pH为10.0。各种金属离子对AprG活性影响较小,且AprG对表面活性剂和氧化剂、还原剂的耐受性较强。底物特异性分析表明,该酶胶原活性较低。AprG对羊皮和兔皮作用显著,且降解羽毛效果明显。【结论】蛋白酶AprG在制革行业中具有良好的应用前景。     

Purification and characterization of fibrinolytic alkaline protease from <Emphasis Type="Italic">Fusarium</Emphasis> sp. BLB

Fusarium sp. BLB, which produces a strongly fibrinolytic enzyme, was isolated from plant leaf (Hibiscus). Fibrinolytic alkaline protease was purified from a culture filtrate of Fusarium sp. BLB by precipitation with (NH₄)₂SO₄ and column chromatography with CM-Toyopearl 650M and Superdex 75. The purified enzyme was homogeneous on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The molecular weight was 27,000 by SDS-PAGE. Maximum activity of protease was observed at pH 9.5 and 50°C. Purified protease was active between pH 2.5 and 11.5 and was found to be stable up to 50°C. The enzyme derived from Fusarium sp. BLB is useful for thrombolytic therapy because this enzyme showed pH resistance. The activity was inhibited by diisopropylfluorophosphate and phenylmethylsulfonyl fluoride. The N-terminal amino acid sequence of the enzyme showed a similarity to those of proteases from Fusarium sp., Streptomyces griseus, Bos taurus bovine, Katsuwo pelamis digestive tract, and Lumbricus rubellus.     

Purification and molecular characterization of subtilisin-like alkaline protease BPP-A from Bacillus pumilus strain MS-1

AIMS: The present study was conducted by screening zein-degrading bacteria in an attempt to obtain zein-degrading protease. METHODS AND RESULTS: Soil bacteria were screened by formation of a clear zone on zein plates. Characterization of a zein-degrading bacterium indicated a taxonomic affiliation to Bacillus pumilus, and was named MS-1 strain. The strain produced two different types of extracellular proteases, BPP-A and BPP-B. In this study, we purified and characterized BPP-A because it exhibited a higher ability to hydrolyze zein than BPP-B. When casein was used as the substrate, the optimal pH for BPP-A was 11.0. In BPP-A, zein was better substrate than casein at pH 13.0, whereas casein was better one than zein at pH 11.0. The bppA gene encoded a 383-amino acid pre-pro form of BPP-A, and mature BPP-A contained 275 amino acid residues. It was concluded that BPP-A belonged to the subtilisin family. CONCLUSION: A zein-degrading bacterium assigned to B. pumilus produced two different types of extracellular proteases, BPP-A and BPP-B. BPP-A exhibited an ability to hydrolyze zein in an extreme alkaline condition. SIGNIFICANCE AND IMPACT OF THE STUDY: This is a first report on screening for zein-degrading micro-organisms. The subtilisin-like protease BPP-A is possible to utilize as an industrial enzyme for the production of zein hydrolysates.