Probing the coordination properties of glutathione with transition metal ions (Cr2+,Mn2+,Fe2+,Co2+, Ni2+,Cu2+,Zn2+,Cd2+,Hg2+) by density functional theory

Complexes formed by reduced glutathione (GSH) with metal cations (Cr²⁺, Mn²⁺,Fe²⁺,Co²⁺,Ni²⁺,Cu²⁺,Zn²⁺,Cd²⁺,Hg²⁺) were systematically investigated by the density functional theory (DFT). The results showed that the interactions of the metal cations with GSH resulted in nine different stable complexes and many factors had an effect on the binding energy. Generally, for the same period of metal ions, the binding energies ranked in the order of Cu²⁺>Ni²⁺>Co²⁺>Fe²⁺>Cr²⁺>Zn²⁺>Mn²⁺; and for the same group of metal ions, the general trend of binding energies was Zn²⁺>Hg²⁺>Cd²⁺. Moreover, the amounts of charge transferred from S or N to transition metal cations are greater than that of O atoms. For Fe²⁺,Co²⁺,Ni²⁺,Cu²⁺,Zn²⁺,Cd²⁺ and Hg²⁺ complexes, the values of the Wiberg bond indices (WBIs) of M-S (M denotes metal cations) were larger than that of M-N and M-O; for Cr²⁺ complexes, most of the WBIs of M-O in complexes were higher than that of M-S and M-N. Furthermore, the changes in the electron configuration of the metal cations before and after chelate reaction revealed that Cu²⁺, Ni²⁺,Co²⁺ and Hg²⁺ had obvious tendencies to be reduced to Cu⁺,Ni⁺,Co⁺ and Hg⁺ during the coordination process.     

Selectivty Assessments of a Sequential Extraction Procedure for Potential Trace Metals’ Mobility and Bioavailability in Phosphate Rocks from Jordan Phosphate Mines

A modified six-step sequential extraction procedure was used to fractionate and determine the following trace metals: U⁴⁺, As⁵⁺, Cd²⁺, Cr⁺², Cu²⁺, Ni²⁺, Pb²⁺, Zn²⁺, and V⁵⁺ in three different phosphate rocks from mines in Jordan. The mean values of uranium in the samples investigated were 98 ± 6 mgkg^?1, 92 ± 3 mgkg^?1, 215 ± 6 mgkg^?1, and 159 ± 13 mgkg^?1, respectively. The sequential extraction results obtained showed that most of the U⁴⁺ in these samples was strongly bound with 87%, 93%, 97%, and 93% of the total content, respectively, remaining in the samples after the sequential extraction steps were performed. Hence, 13%–7% and 3%–7%, respectively, of the U⁴⁺ is distributed in the most labile form, indicating that the majority of the U⁴⁺ in these samples was highly incorporated within the apatite present in the samples. The aforementioned was in agreement with the XRD and SEM-EDX results obtained. The apparent mobility of U⁴⁺, As⁵⁺, Cd²⁺, Cr⁺², Cu²⁺, Ni²⁺, Pb²⁺, Zn²⁺, and V⁵⁺ (using all six extraction steps) from the Al-Abied and Al-Hasa samples was as follows: As⁵⁺ (30.17%)> Cu²⁺ (6.55%)> Zn²⁺(4.34%)> Cd²⁺ (3.84%) Cr⁺² (3.66%)> Pb²⁺ (2.57%)> V⁵⁺ (53%)> Ni²⁺ (1.71%)> U⁴⁺ (0.99%). The mobility of As⁵⁺, Cd²⁺, Cu²⁺, Cr⁺², Ni²⁺, Pb²⁺, U⁴⁺, Zn²⁺, and V⁵⁺ (using all six extraction steps) from Eshidiya samples was as follows: As⁵⁺ (17.32%)> Cr⁺² (4.84%)> Zn²⁺ (4.25%)> Pb²⁺ (4.19%)> Cu²⁺ (3.49%)> V⁵⁺ (1.42%)> Cd²⁺ (0.78) U⁴⁺ (0.09%)> Ni²⁺ (0%).     

Naked Eye Detection of Cr3+ and Co2+ Ions by Gold Nanoparticle Modified with Azomethine

This paper reports the synthesis of azomethine-modified gold nanoparticles with azomethine (azomethine-AuNPs) in aqueous media, which were characterized by FT-IR spectroscopy, ultraviolet–visible spectroscopy (UV-Vis), dynamic light scattering (DLS), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). The azomethine-AuNPs were employed as colorimetric for Cr³⁺ and Co²⁺ ions at pH 6.2–7.5 and 8.1–9.1, at room temperature in aqueous solution. In the presence of Cr³⁺ and Co²⁺, the azomethine-AuNPs induce aggregation of the nanoparticles. Upon aggregation, the surface plasmon absorption band red-shifts so that the nanoparticle solution appears a blue color. The sensitivity of azomethine-AuNPs towards other metal ions, Mg²⁺, Mn²⁺, Cr⁶⁺, Na⁺, Ni²⁺, Ag⁺, Al³⁺, Ca²⁺, Cd²⁺, Cu²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Cd²⁺, K⁺, Co³⁺, Ni²⁺, Pb²⁺, and Zn²⁺ are negligible. This highly selective sensor allows a direct quantitative assay of Co²⁺ and Cr³⁺ with colorimetric detection limits of 83.22 and 108 nM, respectively.

     

A new fluorescent chemosensor for Hg2+ in aqueous solution

We prepared an aminothiourea‐derived Schiff base (DA) as a fluorescent chemosensor for Hg²⁺ ions. Addition of 1 equiv of Hg²⁺ ions to the aqueous solution of DA gave rise to an obvious fluorescence enhancement and the subsequent addition of more Hg²⁺ induced gradual fluorescence quenching. Other competing ions, including Pb²⁺, Cd²⁺, Cr³⁺, Zn²⁺, Fe²⁺, Co³⁺, Ni²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺, did not induce any distinct fluorescence changes, indicating that DA can selectively detect Hg²⁺ ions in aqueous solution. Copyright © 2012 John Wiley & Sons, Ltd.     

Colorimetric chiral fluorescent sensors for Eu3+ and sequential enantioselective sensing of malate anion

Novel phenanthroline Schiff base fluorescent sensors L1 , L2 , and D1 were designed and synthesized. The sensing abilities of the compounds in the presence of metal cations (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ba²⁺, Ca²⁺, Mn²⁺, Pb²⁺, Hg²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺, Cr³⁺, Fe³⁺, Fe²⁺, Al³⁺, and Eu³⁺) were studied by UV‐vis and fluorescent spectroscopy. The compounds L1 , L2 , and D1 could act as Eu³⁺ ion turn‐off fluorescent sensors based on ligand‐to‐metal binding mechanism in DMSO‐H₂O solution (v/v = 1:1, 10 mM Tris, pH = 7.4). Additionally, the L1 –Eu³⁺ and D1 –Eu³⁺ complexes could be applied as turn‐on enantioselective sensors sensing of malate anion isomers with color changes. Furthermore, biological experiments using living PC‐12 cells demonstrated that L1 and D1 had excellent membrane permeability and could be used as effective fluorescent sensors for detecting Eu³⁺ and malate anion in living cells.     

Luminescent sensor for Cd2+, Hg2+ and Ag+ in water based on a sulphur‐containing receptor: quantitative binding–softness relationship

A water‐soluble, high‐output fluorescent sensor, based on a lumazine ligand with a thiophene substituent for Cd²⁺, Hg²⁺ and Ag⁺ metal ions, is reported. The sensor displays fluorescence enhancement upon Cd²⁺ binding (log  β = 2.79 ± 0.08) and fluorescence quenching by chelating with Ag⁺ and Hg²⁺ (log β = 4.31 ± 0.15 and 5.42 ± 0.1, respectively). The mechanism of quenching is static and occurs by formation of a ground‐state non‐fluorescent complex followed by rapid intersystem crossing. The value of the Stern–Volmer quenching rate constant (k_q) by Ag⁺ ions is close to 6.71 × 10¹² mol/L/s at 298 K. The thermodynamic parameters (ΔG, ΔH and ΔS) were also evaluated and indicated that the complexation process is spontaneous, exothermic and entropically favourable. The quantitative linear relationship between the softness values of Klopman (σ_K) or Ahrland (σ_A) and the experimental binding constants (β) being in the order of Hg²⁺ > Ag⁺ > Cd²⁺ suggests that soft–soft interactions are the key for the observed sensitivity and selectivity in the presence of other metal ions, such as: Pb²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Co²⁺, Zn²⁺ and Mg²⁺ ions. Copyright © 2008 John Wiley & Sons, Ltd.     

A new rhodamine‐based fluorescent chemodosimeter for mercuric ions in water media

A new rhodamine–ethylenediamine–nitrothiourea conjugate (RT) was synthesized and its sensing property as a fluorescent chemodosimeter toward metal ions was explored in water media. Analytical results from absorption and fluorescence spectra revealed that the addition of Hg²⁺ ions to the aqueous solution of the chemodosimeter RT caused a distinct fluorescence OFF–ON response with a remarkable visual color change from colorless to pink; however, no clear spectral and color changes were observed from other metal ions including: Zn²⁺, Cu²⁺, Cd²⁺, Pb²⁺, Ag⁺, Fe²⁺, Cr³⁺, Co³⁺, Ni²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺. The sensing results and the molecular structure suggested that a Hg²⁺‐induced a desulfurization reaction and cyclic guanylation of the thiourea moiety followed by ring‐opening of the rhodamine spirolactam in RT are responsible for a distinct fluorescence turn‐on signal, indicating that RT is a remarkably sensitive and selective chemodosimeter for Hg²⁺ ions in aqueous solution. Hg²⁺ within a concentration range from 0.1 to 25 μM can be determined using RT as a chemodosimeter and a detection limit of 0.04 μM is achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

A highly selective and sensitive boronic acid-based sensor for detecting Pd2+ ion under mild conditions

Herein, a boronic acid-based sensor was reported selectively to recognize Pd²⁺ ion. The fluorescence intensity increased 36-fold after sensor binding with 2.47 × 10⁻⁵ M of Pd²⁺ ion. It was carried out in the 99% aqueous solution for binding tests, indicating sensor having good water solubility. In addition, it is discernible that Pd²⁺ ion turned on the blue fluorescence of sensor under a UV–lamp (365 nm), while other ions (Ag⁺, Al³⁺, Ba²⁺, Ca²⁺, Cr²⁺, Cd²⁺, Co²⁺, Cs²⁺, Cu²⁺, Fe²⁺, Fe³⁺, K⁺, Li⁺, Mg²⁺, Mn²⁺, Na⁺, Ni²⁺ and Zn²⁺) did not show the similar change. Furthermore, sensor has a low limit of detection (38 nM) and high selectivity, which exhibits the potential for the development of Pd²⁺ recognition in practical environments.     

Effects of heavy metal cations on the mitochondrial ornithine/citrulline transporter reconstituted in liposomes

The effect of heavy metal cations on the mitochondrial ornithine/citrulline transporter was tested in proteoliposomes reconstituted with the protein purified from rat liver. The transport activity was measured as [³H]ornithine uptake in proteoliposomes containing internal ornithine (ornithine/ornithine antiport mode) or as [³H]ornithine efflux in the absence of external substrate (ornithine/H⁺ transport mode). 0.1 mM Cu²⁺, Pb²⁺, Hg²⁺, Cd²⁺ and Zn²⁺ strongly inhibited (more than 85%) the antiport; whereas Mn²⁺, Co²⁺ and Ni²⁺ inhibited less efficiently (25, 47 and 69%, respectively). The IC₅₀ values of the transporter for the different metal ions ranged from 0.71 to 350 μM. Co²⁺ and Ni²⁺ also inhibited the [³H]ornithine efflux whereas Cu²⁺, Pb²⁺, Hg²⁺, Cd²⁺ and Zn²⁺ stimulated the [³H]ornithine efflux. The stimulation of the [³H]ornithine efflux by Cu²⁺ and Cd²⁺ (as well as by Pb²⁺, Hg²⁺ and Zn²⁺) was not prevented by NEM and was reversed by DTE. These features indicated that the inhibition of the antiport was due to the interaction of the Cu²⁺, Pb²⁺, Hg²⁺, Cd²⁺ and Zn²⁺ with a population of SH groups, of the transporter, responsible for the inhibition of the physiological function; whereas the stimulation of [³H]ornithine efflux was due to the induction of a pore-like function of the transporter caused by interaction of cations with a different population of SH groups. Differently, the inhibition of the ornithine transporter by Ni²⁺, Co²⁺ or Mn²⁺ was caused by interaction with the substrate binding site, as indicated by the competitive or mixed inhibition.     

Effect of divalent metal ions on the microsomal aniline hydroxylase system of rainbow trout

The ability of trout to metabolize aniline in vitro in the presence of some divalent metal ions was investigated in the liver microsomes of rainbow trout, Salmo gairdneri. Trout liver microsomes were highly capable of catalyzing aniline hydroxylation to p-aminophenol with a specific activity of 0.068 nmoles/min per mg of microsomal protein in potassium phosphate buffer, pH 7.4 at 25°C. The activity of the aniline hydroxylase system was competitively inhibited by Hg⁺², Ni⁺², Cd⁺², and Zn⁺², while Cu⁺² and Fe⁺³ seemed to inhibit the activity noncompetitively at 1 mM aniline concentrations. IC₅₀ values at fixed aniline concentration were estimated to be 0.45 mM for Hg⁺², Ni⁺², and Cd⁺², 1.8 mM for Zn⁺² and Fe⁺³, and 1.3 mM for Cu⁺². Eadie-Hofstee plots gave identical V_max values of approximately 0.046 nmol/min per mg of protein while K_m values were increased in the presence of Hg⁺², Ni⁺², CD⁺², and Zn⁺², indicating competitive inhibition. Both K_m and V_max values were affected by Fe⁺³ and Cu⁺², suggesting noncompetitive inhibition. K_i values extracted from the Dixon plots were determined t be 0.23, 0.43, and 0.65 mM for Hg⁺², Ni⁺², and Cd⁺², respectively, providing the most effective inhibition on the aniline hydroxylase system among studied metal ions. The K_i values were much higher in the presence of others. The results indicate a selective inhibition of the aniline hydroxylase system of trout liver microsomes by divalent metal ions. © 1997 John Wiley & Sons, Inc.     

Inhibition of the biosynthesis ofN-acetylneuraminic acid by metal ions and seleniumin vitro

In liver homogenate the biosynthesis ofN-acetylneuraminic acid usingN-acetylglucosamine as precursor can be followed stepwise by applying different chromatographic procedures. In this cell-free system 16 metal ions (Zn²⁺, Mn²⁺, La³⁺, Co²⁺, Cu²⁺, Hg²⁺, VO ₃ ^– , Pb²⁺, Ce³⁺, Cd²⁺, Fe²⁺, Fe³⁺, Al³⁺, Sn²⁺, Cs⁺ and Li⁺) and the selenium compounds, selenium(IV) oxide and sodium selenite, have been checked with respect to their ability to influence a single or possible several steps of the biosynthesis ofN-acetylneuraminic acid. It could be shown that the following enzymes are sensitive to these metal ions (usually applied at a concentration of 1 mmoll^–1):N-acetylglucosamine kinase (inhibited by Zn²⁺ and vandate), UDP-N-acetylglucosamine-2-epimerase (inhibited by zn²⁺, Co²⁺, Cu²⁺, Hg²⁺, VO ₃ ^– , Pb²⁺, Cd²⁺, Fe³⁺, Cs⁺, Li⁺, selenium(IV) oxide and selenite), andN-acetylmannosamine kinase (inhibited by Zn²⁺, Cu²⁺, Cd²⁺, and Co²⁺). Dose dependent measurements have shown that Zn²⁺, Cu²⁺ and selenite are more efficient inhibitors of UDP-N-acetylglucosamine-2-epimerase than vanadate. As for theN-acetylmannosamine kinase inhibition, a decreasing inhibitory effect exists in the following order Zn²⁺, Cd²⁺, Co²⁺ and Cu²⁺. In contrast, La³⁺, Al³⁺ and Mn²⁺ (1 mmoll^–1) did not interfere with the biosynthesis ofN-acetylneuraminic acid. Thus, the conclusion that the inhibitory effect of the metal ions investigated cannot be regarded as simply unspecific is justified.Dedicated to Professor Theodor Günther on the occasion of his 60th birthday     

Substrate Profile and Metal-ion Selectivity of Human Divalent Metal-ion Transporter-1

Divalent metal-ion transporter-1 (DMT1) is a H⁺-coupled metal-ion transporter that plays essential roles in iron homeostasis. DMT1 exhibits reactivity (based on evoked currents) with a broad range of metal ions; however, direct measurement of transport is lacking for many of its potential substrates. We performed a comprehensive substrate-profile analysis for human DMT1 expressed in RNA-injected Xenopus oocytes by using radiotracer assays and the continuous measurement of transport by fluorescence with the metal-sensitive PhenGreen SK fluorophore. We provide validation for the use of PhenGreen SK fluorescence quenching as a reporter of cellular metal-ion uptake. We determined metal-ion selectivity under fixed conditions using the voltage clamp. Radiotracer and continuous measurement of transport by fluorescence assays revealed that DMT1 mediates the transport of several metal ions that were ranked in selectivity by using the ratio I_max/K_0.5 (determined from evoked currents at −70 mV): Cd²⁺ > Fe²⁺ > Co²⁺, Mn²⁺ ≫ Zn²⁺, Ni²⁺, VO²⁺. DMT1 expression did not stimulate the transport of Cr²⁺, Cr³⁺, Cu⁺, Cu²⁺, Fe³⁺, Ga³⁺, Hg²⁺, or VO⁺. ⁵⁵Fe²⁺ transport was competitively inhibited by Co²⁺ and Mn²⁺. Zn²⁺ only weakly inhibited ⁵⁵Fe²⁺ transport. Our data reveal that DMT1 selects Fe²⁺ over its other physiological substrates and provides a basis for predicting the contribution of DMT1 to intestinal, nasal, and pulmonary absorption of metal ions and their cellular uptake in other tissues. Whereas DMT1 is a likely route of entry for the toxic heavy metal cadmium, and may serve the metabolism of cobalt, manganese, and vanadium, we predict that DMT1 should contribute little if at all to the absorption or uptake of zinc. The conclusion in previous reports that copper is a substrate of DMT1 is not supported.     

A bacterial view of the periodic table: genes and proteins for toxic inorganic ions

Essentially all bacteria have genes for toxic metal ion resistances and these include those for Ag⁺, AsO ⁻₂ , AsO ³⁻₄ , Cd²⁺, Co²⁺, CrO ²⁻₄ , Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, TeO ²⁻₃ , Tl⁺ and Zn²⁺. The largest group of resistance systems functions by energy-dependent efflux of toxic ions. Fewer involve enzymatic transformations (oxidation, reduction, methylation, and demethylation) or metal-binding proteins (for example, metallothionein SmtA, chaperone CopZ and periplasmic silver binding protein SilE). Some of the efflux resistance systems are ATPases and others are chemiosmotic ion/proton exchangers. For example, Cd²⁺-efflux pumps of bacteria are either inner membrane P-type ATPases or three polypeptide RND chemiosmotic complexes consisting of an inner membrane pump, a periplasmic-bridging protein and an outer membrane channel. In addition to the best studied three-polypeptide chemiosmotic system, Czc (Cd²⁺, Zn²⁺, and Co²), others are known that efflux Ag⁺, Cu⁺, Ni²⁺, and Zn²⁺. Resistance to inorganic mercury, Hg²⁺ (and to organomercurials, such as CH₃Hg⁺ and phenylmercury) involve a series of metal-binding and membrane transport proteins as well as the enzymes mercuric reductase and organomercurial lyase, which overall convert more toxic to less toxic forms. Arsenic resistance and metabolizing systems occur in three patterns, the widely-found ars operon that is present in most bacterial genomes and many plasmids, the more recently recognized arr genes for the periplasmic arsenate reductase that functions in anaerobic respiration as a terminal electron acceptor, and the aso genes for the periplasmic arsenite oxidase that functions as an initial electron donor in aerobic resistance to arsenite.

     

Citric acid fermentation from starch and dextrose syrups by a trace metal resistant mutant of Aspergillus niger

Potato starch and both untreated and decationized dextrose syrups were used as substrates for submerged citric acid biosynthesis using a mutant of Aspergillus niger. The same yield of product (80%) was achieved with both syrups and the starch despite having different trace metals content. The obtained mutant was more sensitive than the parent to Cd²⁺, Mo²⁺, and As³⁺, with decreasing yields of citric acid at 10 mg of ions l^–1. Fe²⁺, Mn²⁺, V²⁺ below 50 mg l^–1 and Cr³⁺, Ni²⁺, Cu²⁺ up to 100 mg l^–1, did not significantly inhibit citric acid production.     

Characterization of a recombinant thermostable xylanase from deep-sea thermophilic Geobacillus sp. MT-1 in East Pacific

A novel xylanase-producing thermophilic strain MT-1 was isolated from a deep-sea hydrothermal field in east Pacific. A xylanase gene encoding 331 amino-acid peptide from this isolate was cloned and expressed in Escherichia coli. The recombinant xylanase exhibited maximum activity at 70°C and had an optimum pH of 7.0. It was active up to 90°C and showed activity over a wide pH ranging from 5.5 to 10.0. The crude xylanase presented similar properties in temperature and pH to those of the recombinant xylanase. The recombinant xylanase was stable in 1 mM of enzyme inhibitors (PMSF, EDTA, 2-ME or DTT) and in 0.1% detergents (Tween 20, Chaps or Triton X-100), whereas, it was strongly inhibited by sodium dodecyl sulfate (SDS) (1 mM). In addition, its catalytic function was stable in the presence of Li⁺, Na⁺ or K⁺. However, it was strongly inhibited by Ni²⁺, Mn²⁺, Co²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Al³⁺ (1 or 0.1 mM). The K _m and V _max of the recombinant xylanase for oat spelt xylan were calculated to be 1.579 mg/ml and 289 μmol/(min • mg), respectively. Our study, therefore, presented a rapid overexpression and purification of xylanase from deep-sea thermophile aimed at improving the enzyme yield for industrial applications and scientific research.     

Calcium signaling mediates the response to cadmium toxicity in Saccharomyces cerevisiae cells

The involvement of Ca²⁺ in the response to high Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Hg²⁺ was investigated in Saccharomyces cerevisiae. The yeast cells responded through a sharp increase in cytosolic Ca²⁺ when exposed to Cd²⁺, and to a lesser extent to Cu²⁺, but not to Mn²⁺, Co²⁺, Ni²⁺, Zn²⁺, or Hg²⁺. The response to high Cd²⁺ depended mainly on external Ca²⁺ (transported through the Cch1p/Mid1p channel) but also on vacuolar Ca²⁺ (released into the cytosol through the Yvc1p channel). The adaptation to high Cd²⁺ was influenced by perturbations in Ca²⁺ homeostasis. Thus, the tolerance to Cd²⁺ often correlated with sharp Cd²⁺-induced cytosolic Ca²⁺ pulses, while the Cd²⁺ sensitivity was accompanied by the incapacity to rapidly restore the low cytosolic Ca²⁺.     

Sorption of Heavy Metal Cations by Corn Mitochondria and the Effects on Electron and Energy Transfer Reactions

The passive sorption of Pb⁺², Cd⁺², Zn⁺², Co⁺², Ni⁺², and Mn⁺² by isolated corn mitochondria was determined, and, except for Pb⁺², the maximum sorption for each cation was about 58 nmol per milligram of protein. Sorption of Pb⁺² was apparently ten times greater, but precipitation may have been the cause of this larger value. The effects of Pb⁺², Cd⁺², Zn⁺², Co⁺², and Ni⁺² on acceptorless rates of electron transport for three substrates were determined. Greater than 50% inhibitions of oxidation were observed for succinate after additions of >0.1 mM Cd⁺², Zn⁺², or Pb⁺²: for NADH after additions of >0.5 mM Cd⁺² or Zn⁺²; and for malate + pyruvate after additions of >0.1 mM Cd⁺². Some inhibition of the rate of substrate oxidation was observed for most cations at higher concentrations. Coupling, as measured by ADP/O ratios, was inhibited at lowest concentrations by Cd⁺² or Zn⁺² and at higher concentrations by Co⁺² or Ni⁺². Substantial swelling of mitochondria oxidizing succinate was observed following additions of O.1 mM Cd⁺² or Pb⁺², Correlations are drawn between the effects of Pb⁺², Cd⁺², Zn⁺², Co⁺², and Ni⁺² and their sorption to mitochondrial membranes.     

Compartments for the Management of Municipal Solid Waste

Despite technological developments and improved liner-material applications, heavy metals in landfill leachate still penetrate the soil profile, polluting the soil and ground-water. An alternative approach therefore must be explored to reduce heavy-metal migration in soil-bentonite landfill liners. By considering the interaction of different heavy metals and their synergetic and antagonistics behaviors, such an approach could be developed. Low mobility metals such as Cu²⁺, and Pb²⁺ inhibit the adsorption of Cd²⁺ which is a moderate-mobility metal and Cu²⁺ sorption is decreased by the presence of Zn²⁺ and Cd²⁺. Therefore, Zn²⁺, a low-mobility metal, cannot be grouped with Cu²⁺. This way, four compatible metal groups have been identified: (1) low mobility: Pb²⁺, Cu²⁺, and Ag, (2) low mobility: Zn²⁺ and Cr³⁺; (3) moderate mobility: As²⁺, Fe²⁺, and Ni²⁺; (4) high mobility: Cd²⁺ and Hg²⁺. Cd²⁺ with a moderate mobility pattern is synergetic to Fe²⁺ and is more mobile with Ni²⁺. Therefore, Cd²⁺ is separated from the moderate-mobility group and is consigned with Hg, a high-mobility metal. The liner materials suitable for Hg²⁺ are assumed to be suitable for Cd²⁺ as well. Based on this concept, and to reduce heavy metal mobility, wastes should be segregated on compatibility basis according to their heavy metal contents before being disposed in different individual compartments. For wastes containing several incompatible heavy metals, sorting should be based on the heavy-metal with the highest concentration. Another solution is the manufacturing of products using compatible heavy metal combinations and then labeling them accordingly. Such waste segregation and landfill compartmentalization lowers risks of groundwater contamination and liner cost.     

Purification and characterization of the α-glucosidase produced by thermophilic fungus <Emphasis Type="Italic">Thermoascus aurantiacus</Emphasis> CBMAI 756

An α-glucosidase enzyme produced by the fungus Thermoascus aurantiacus CBMAI 756 was purified by ultra filtration, ammonium sulphate precipitation, and chromatography using Q Sepharose, Sephacryl S-200, and Superose 12 columns. The apparent molecular mass of the enzyme was 83 kDa as determined in gel electrophoresis. Maximum activity was observed at pH 4.5 at 70°C. Enzyme showed stability stable in the pH range of 3.0–9.0 and lost 40% of its initial activity at the temperatures of 40, 50, and 60°C. In the presence of ions Na⁺, Ba²⁺, Co²⁺, Ni²⁺, Mg²⁺, Mn²⁺, Al³⁺, Zn²⁺, Ca²⁺ this enzyme maintained 90–105% of its maximum activity and was inhibited by Cr³⁺, Ag⁺, and Hg²⁺. The enzyme showed a transglycosylation property, by the release of oligosaccharides after 3 h of incubation with maltose, and specificity for short maltooligosaccharides and α-PNPG. The K_m measured for the α-glucosidase was 0.07 μM, with a V_max of 318.0 μmol/min/mg.     

Uptake of heavy metals by <Emphasis Type="Italic">Stylonychia mytilus</Emphasis> and its possible use in decontamination of industrial wastewater

The heavy metal resistant ciliate, Stylonychia mytilus, isolated from industrial wastewater has been shown to be potential bioremediator of contaminated wastewater. The ciliate showed tolerance against Zn²⁺ (30 μg/mL), Hg²⁺ (16 μg/mL) and Ni²⁺ (16 μg/mL). The metal ions slowed down the growth of the ciliate as compared with the culture grown without metal stress. The reduction in cell population was 46% for Cd²⁺, 38% for Hg²⁺, 23% for Zn²⁺, 39% for Cu²⁺ and 51% for Ni²⁺ after 8 days of metal stress. S. mytilus reduced 91% of Cd²⁺, 90% of Hg²⁺ and 98% of Zn²⁺ from the medium after 96 h of incubation in a culture medium containing 10 μg/mL of the respective metal ions. Besides this, the ciliate could also remove 88% of Cu²⁺ and 73% Ni²⁺ from the medium containing 5 μg/mL of each metal after 96 h. The ability of Stylonychia to take up variety of heavy metals from the medium could be exploited for metal detoxification and environmental clean-up operations.