The effect of chemical functionalisation on nanoporous energy absorption system

The mechanism of water infiltration into a single-walled carbon nanotube (SWCNT) was investigated based on the molecular dynamics simulation. The influence of chemical functionalization treatment on unsaturated carbon atoms at the entrance of a SWCNT was explored. The chemical functionalisation treatment with hydroxyl groups can effectively reduce the critical pressure barrier and facilitate water molecules to invade a SWCNT. Conversely, the hydrogen groups can intensify the non-wetting ability of a SWCNT. In addition, the hydrogenated entrance system is of higher recovery performance under dynamic loading, while the system with hydroxylated entrance shows poor performance. The observed unique mechanisms provide a possible method in energy absorption and conversion.     

OH-functionalized open-ended armchair single-wall carbon nanotubes (SWCNT) studied by density functional theory

The structures of ideal armchair (5,5) single-wall carbon nanotubes (SWCNTs) of different lengths (3.7, 8.8, and 16.0 Å for C₄₀H₂₀, C₈₀H₂₀, and C₁₄₀H₂₀) and with 1–10 hydroxyl groups at the end of the nanotube were fully optimized at the B3LYP/3-21G level, and in some cases at the B3LYP/6-31G* level, and the energy associated with the attachment of the OH substituent was determined. The OH-group attachment energy was compared with the OH functionalization of phenanthrene and picene models and with previous results for zigzag (9.0) SWCNT systems. In comparison to zigzag SWCNTs, the armchair form is more (by about 5 to 10 kcal mol^?1) reactive toward hydroxylation.

Open image in new window

Figure The structures of ideal armchair (5,5) single-wall carbon nanotubes (SWCNTs) of different lengths (3.7, 8.8, and 16.0 Å for C₄₀H₂₀, C₈₀H₂₀, and C₁₄₀H₂₀) and with 1–10 hydroxyl groups at the end of the nanotube were fully optimized at the B3LYP/3-21 G level, and in some cases at the B3LYP/6-31 G* level, and the energy associated with the attachment of the OH substituent was determined.

     

Simple benzene derivatives adsorption on defective single-walled carbon nanotubes: a first-principles van der Waals density functional study

We have investigated the interaction between open-ended zig-zag single-walled carbon nanotube (SWCNT) and a few benzene derivatives using the first-principles van der Waals density functional (vdW-DF) method, involving full geometry optimization. Such sp ²-like materials are typically investigated using conventional DFT methods, which significantly underestimate non-local dispersion forces (vdW interactions), therefore affecting interactions between respected molecules. Here, we considered the vdW forces for the interacting molecules that originate from the interacting π electrons of the two systems. The ?0.54 eV adsorption energy reveals that the interaction of benzene with the side wall of the SWCNT is typical of the strong physisorption and comparable with the experimental value for benzene adsorption onto the graphene sheet. It was found that aromatics are physisorbed on the sidewall of perfect SWCNTs, as well as at the edge site of the defective nanotube. Analysis of the electronic structures shows that no orbital hybridization between aromatics and nanotubes occurs in the adsorption process. The results are relevant in order to identify the potential applications of noncovalent functionalized systems.

Probing the Diameter Limit of Single Walled Carbon Nanotubes in SWCNT: Fullerene Solar Cells

In this work, for the first time, the diameter limit of surfactant wrapped single walled carbon nanotubes (SWCNTs) in SWCNT:C₆₀ solar cells is determined through preparation of monochiral small and large diameter nanotube devices as well as those from polychiral mixtures. Through assignment of the different nanotube chiralities by photoluminescence and optical density measurements a diameter limit yielding 0% internal quantum efficiency (IQE) is determined. This work provides insights into the required net driving energy for SWCNT exciton dissociation onto C₆₀ and establishes a family of (n,m) species which can efficiently be utilized in polymer‐free SWCNT:C₆₀ solar cells. Using this approach the largest diameter nanotube with an IQE > 0% is found to be (8,6) with a diameter of 0.95 nm. Possible strategies to extend this diameter limit are then discussed.     

Tensile loading characteristics of hydrogen stored carbon nanotubes in PEM fuel cell operating conditions using molecular dynamics simulation

Mechanical characteristics of hydrogen stored single walled carbon nanotube (SWCNT) in proton exchange membrane fuel cell (PEMFC) operating conditions are analysed in this work using molecular dynamics simulation method. The investigation of mechanical characteristics of hydrogen stored SWCNT is critical in determining the lifetime and stability of SWCNT-based membranes used in PEMFC. The study provides a comprehensive analysis on the effects of geometry, vacancy defects and PEMFC operating temperature on the mechanical properties of hydrogen stored SWCNT. The findings show that the mechanical strength of the hydrogen stored SWCNT can be enhanced by deploying a bigger armchair SWCNT. Furthermore, increase in operating temperature of PEMFC reduces the mechanical resistance of hydrogen stored SWCNT, which however can be overcome by suitably introducing vacancy defects in the SWCNT geometry. This has provided potential way of increasing the hydrogen storage capacity of SWCNT which is very useful for onboard application of PEMFC. It is anticipated that the findings obtained from this paper will have a paramount importance in the field of hydrogen energy fuel cell technology and further compliment the potential applications of SWCNTs as promising candidates for applications in fuel cells and energy storage devices.     

Molecular dynamics exploration of the binding mechanism and properties of single-walled carbon nanotube to WT and mutant VP35 FBP region of Ebola virus

VP35 of Ebola viruses (EBOVs) is an attractive potential target because of its multifunction. All-atom molecular dynamics (MD) simulations and Molecular Mechanics Generalized Born surface area (MM/GBSA) energy calculations are performed to investigate the single-walled carbon nanotube (SWCNT) as an inhibitor in wild-type (WT) VP35 as well as in three primary mutants (K248A, I295A, and K248A/I295A) through docking the SWCNT in the first basic patch (FBP) of VP35. The SWCNTs of all the four systems effectively bind to the FBP. Interestingly, the sites and orientations of the SWCNT binding to the I295A mutant and K248A/I295A double mutants change significantly to accommodate the variation of the VP35 conformation. Moreover, the VDW can provide the major forces for affinity binding in all four systems.     

Enhancement of water flow across a carbon nanotube

It is important to investigate how to enhance the flow rate of single-file water molecules across nanochannels. To our knowledge, all the existing methods are based on pressure gradients, external point charges or uniform/graded electric fields. Accordingly, these methods are all based on exogenous tools, and thus bring challenges for both energy-saving and miniaturisation. In contrast, here we manage to reveal an endogenously determined mechanism of flow enhancement. On the basis of molecular dynamics simulations, we investigate water permeation across a single-walled carbon nanotube (SWCNT A) in the presence of another SWCNT (SWCNT B). We find that the flow rate of the single-file water molecules across SWCNT A is enhanced for the case of unblocked SWCNT B compared with the rate for the case of blocked SWCNT B, and that this flow rate is determined by the separation between the two SWCNTs and the diameter of SWCNT B.     

PEGylated Single-Walled Carbon Nanotubes as Nanocarriers for Cyclosporin A Delivery

Single-walled carbon nanotubes (SWCNTs) have attracted the attention of many researchers due to their remarkable physicochemical features and have been found to be a new family of nanovectors for the delivery of therapeutic molecules. The ability of these nanostructures to load large amounts of drug molecules on their outer surface has been considered as the main advantage by many investigators. Here, we report the development of a PEGylated SWCNT-mediated delivery system for cyclosporin A (CsA) as a potent immunosuppressive agent. The available OH group in the CsA structure was first linked to a bi-functional linker (i.e., succinic anhydride) in order to provide a COOH terminal group. CsA succinylation process was optimized by using the modified simplex method. The resulting compound, CsA–CO–(CH₂)₂–COOH, was then grafted onto the exterior surface of SWCNTs, previously PEGylated with phospholipid–PEG₅₀₀₀–NH₂ conjugates, through the formation of an amide bond with the free amine group of PEGylated SWCNTs. Drug loading, stability of the PEGylated SWCNT–CsA complex, and in vitro release of the drug were evaluated. Loading efficiencies of almost 72% and 68% were achieved by UV spectrophotometry and elemental analysis methods, respectively. It was observed that 57.3% of cyclosporine was released from CsA–Pl–PEG₅₀₀₀–SWCNTs after 3 days. In this investigation, we conjugated CsA to an amine-terminated phospholipid–polyethylene glycol chain attached on SWCNTs via a cleavable ester bond and demonstrated the possible potential of PEGylated SWCNT-based systems for CsA delivery.     

单壁碳纳米管载锦鲤疱疹病毒ORF149核酸疫苗的构建

为了开发新型高效疫苗预防锦鲤疱疹病毒病,以单壁碳纳米管(SWCNT)作为运输载体,构建锦鲤疱疹病毒(KHV)ORF149核酸疫苗。首先构建pcDNA3.1(+)-ORF149重组质粒,通过瞬时转染和免疫印迹分析确定其表达情况,然后通过1,3-偶极环加成反应法将重组质粒与SWCNTs进行偶联,最后通过扫描电镜观察和核酸电泳鉴定其偶联是否成功。结果表明,构建的重组质粒转染细胞后经免疫印迹分析和间接免疫荧光试验均能检测到特异性信号;在核酸琼脂糖凝胶电泳中,构建的重组疫苗电泳条带消失;在场发射扫描电镜观察下,与重组质粒进行偶联的SWCNTs和空白SWCNTs形态差异明显。     

Enhanced Uniformity and Area Scaling in Carbon Nanotube–Fullerene Bulk‐Heterojunction Solar Cells Enabled by Solvent Additives

Single‐walled carbon nanotube (SWCNT) fullerene solar cells have recently attracted attention due to their low‐cost processing, high environmental stability, and near‐infrared absorption. While SWCNT–fullerene bulk‐heterojunction photovoltaics employing an inverted architecture and polychiral SWCNTs have achieved efficiencies exceeding 3% over device areas of ≈1 mm², large‐area SWCNT solar cells have not yet been demonstrated. In particular, with increasing device area, spatial inhomogeneities in the SWCNT film have limited overall device performance. Here, 1,8‐diiodooctane (DIO) is utilized as a solvent additive to reduce fullerene domain size and to improve SWCNT–fullerene bulk‐heterojunction morphology. Under optimized conditions, DIO elucidates the influence of SWCNT chiral distribution on overall device performance, revealing a tradeoff between short‐circuit current density and fill factor as a function of the chirality distribution present. The combination of SWCNT chirality distribution engineering and improved spatial homogeneity via solvent additives enables area‐scaling of SWCNT–fullerene solar cells with performance comparable to small‐area cells.     

Performance Enhancement of Polymer‐Free Carbon Nanotube Solar Cells via Transfer Matrix Modeling

Polymer‐free (6,5) single‐walled carbon nanotubes (SWCNTs) prepared using the gel permeation approach are integrated into SWCNT:C₆₀ solar cells. Evaporation‐driven self‐assembly is used to form large‐area SWCNT thin films from the surfactant‐stabilized aqueous suspensions. The thicknesses of various layers within the solar cell are optimized by theoretical modeling using transfer matrix calculations, where the distribution of the electric field within the stack is matched to light absorption by the SWCNTs through either their primary (S₁₁) or secondary (S₂₂) absorption peaks, or a combination thereof. The validity of the model is verified experimentally through a detailed parameter study and then used to develop SWCNT:C₆₀ solar cells with high open‐circuit voltage (0.44 V) as well as a cutting‐edge internal quantum efficiency of up to 86% through the nanotube S₁₁ transition, over an active area of 0.105 cm².     

Electrochemical behavior of caffeic acid at single-walled carbon nanotube:graphite-based electrode

The performance of a single-walled carbon nanotube:graphite-based electrode, prepared by mixing single-walled carbon nanotubes (SWCNTs) and graphite powder, is described. The resulting electrode shows an excellent behavior for the redox of caffeic acid (CA), an important biological molecule. Due to the existing resemblance between electrochemical and biological reactions, it can be assumed that the oxidation mechanisms on the electrode and in the body share similar principles. SWCNT:graphite-based electrode presents a significant decrease in the overvoltage for the CA oxidation as well as a dramatic improvement in the reversibility of the CA redox behavior in comparison with the graphite-based and glassy carbon (GC) electrodes.     

Driving force of water entry into hydrophobic channels of carbon nanotubes: entropy or energy?

Spontaneous entry of water molecules inside single-wall carbon nanotubes (SWCNTs) has been confirmed by both simulations and experiments. Using molecular dynamics simulations, we have studied the thermodynamics of filling of a (6,6) carbon nanotube in a temperature range from 273 to 353 K and with different strengths of the nanotube–water interaction. From explicit energy and entropy calculations using the two-phase thermodynamics method, we have presented a thermodynamic understanding of the filling behaviour of a nanotube. We show that both the energy and the entropy of transfer decrease with increasing temperature. On the other hand, scaling down the attractive part of the carbon–oxygen interaction results in increased energy of transfer while the entropy of transfer increases slowly with decreasing the interaction strength. Our results indicate that both energy and entropy favour water entry into (6,6) SWCNTs. Our results are compared with those of several recent studies of water entry into carbon nanotubes.     

Modeling the interaction between anti-cancer drug penicillamine and pristine and functionalized carbon nanotubes for medical applications: density functional theory investigation and a molecular dynamics simulation

Abstract

The present study focuses on the prediction and investigation of binding properties of penicillamine with pure (5,5) single-walled carbon nanotube (SWCNT) and functionalized SWCNT (f-SWCNT) through the B3LYP and M06-2X functionals using the 6-31G** basis set. The electronic and structural properties, adsorption energy and frontier molecular orbitals of various configurations are examined. Our theoretical results indicated that the interaction of the nanotubes with penicillamine molecule is weak so that the drug adsorption process is typically physisorption. Also, results of theoretical calculations show that the adsorption of the drug molecule on f-SWCNT is stronger with shorter intermolecular distances in comparison to pure SWCNT. The natural bond orbital (NBO) analysis of studied systems demonstrates that the charge is transferred from penicillamine molecule to the nanotubes. Furthermore, molecular dynamics (MD) simulation is employed to evaluate the dynamic and diffusion behavior of drug molecule on SWCNT and f-SWCNT. Energy results show that drug molecule spontaneously moves toward the carriers, and the van der Waals energy contributions in drug adsorption are more than electrostatic interaction. The obtained results from MD simulation confirm that the functionalization of SWCNT leads to increase in the solubility of the carrier in aqueous solution.

Communicated by Ramaswamy H. Sarma     

Radiofrequency interaction with conductive colloids: Permittivity and electrical conductivity of single‐wall carbon nanotubes in saline

Conductive nanoparticles may enhance tissue heating during radiofrequency (RF) irradiation. Specific absorption rate (SAR) is known to rise with the electrical conductivity of tissue. However, no studies to date have measured the relationship between complex permittivity and nanoparticle concentration in tissue‐like samples. The complex permittivities of colloids containing single‐wall carbon nanotubes (SWCNTs) in normal (0.9%) saline were measured from 20 MHz to 1 GHz. Carbon concentrations ranged from 0 to 93 mM (0.06% volume), based on SWCNT weight per volume. Measurements were made with 0.02% Pluronic F108 surfactant added to the colloids to prevent SWCNT flocculation. The data were fit to the Cole–Cole relaxation model with an added constant phase angle element to correct for electrode polarization effects at low RF frequencies. Electrode polarization effects increased with carbon concentration. The real parts of the permittivities of the colloids increased with carbon concentration. The static conductivity rose linearly with carbon concentration, doubling from 0 to 93 mM. The SAR of the colloids is expected to increase with RF frequency, based on the properties of the imaginary part of the permittivity. Bioelectromagnetics 31:582–588, 2010. © 2010 Wiley‐Liss, Inc.     

Theoretical investigation on the selective detection of SO2 molecule by AlN nanosheets

A density functional theory investigation of adsorption of monomer, dimer and trimer forms of pyrrole on the outer surface of zigzag (7,0) single-walled carbon nanotube (SWCNT) has been reported. Geometries of the complexes were optimized using the M06-2X functional and the 6-31G(d,p) basis set. Moreover, 6-311G(d,p), cc-pVDZ and cc-pVTZ basis sets were used for the adsorption energy calculation and such energies were corrected for the basis set superposition error. Vertical ionization potential and electron affinity of the investigated system were also computed. The interaction of polypyrrole on the SWCNT surface is characterized by the stacking interaction. Adsorption (binding) energy of pyrrole on the SWCNT surface is weak, but such energy increases with the number of monomer units in the pyrrole oligomer. In the SWCNT-pyrrole complexes, the oxidation and reduction processes will take place only at the SWCNT. The influence of larger unit on the electronic properties of the complex has been detailed.     

Density functional investigation of hydrogen gas adsorption on Fe?doped pristine and Stone?Wales defected single?walled carbon nanotubes

The adsorptions of hydrogen molecule of the Fe?-?doped pristine and Stone?-?Wales defected armchair (5,5) single?-?walled carbon nanotubes (SWCNTs) compared with the pristine SWCNT were investigated by using the density functional theory at the B3LYP/LanL2DZ level. The doping of Fe atom into SWCNTs occurring via an exothermic process was found. The adsorptions of hydrogen molecule on the Fe?-?doped structures of either perfect or SW defected SWCNTs are stronger than on their corresponding undoped structures. The structural and electronic properties of the pristine and SW defected SWCNTs, their Fe?-?doped structures and their hydrogen molecule adsorptions are reported.     

Inhibitory effects of single-walled carbon nanotubes on biofilm formation from Bacillus anthracis spores

This study reports the inhibitory effect of single walled carbon nanotubes (SWCNTs) on biofilm formation from Bacillus anthracis spores. Although the presence of 50 to 100 μg ml^?1 of SWCNTs in the suspension increased spore attachment in the wells of 96-well plates, the presence of 200 μg ml^?1 of SWCNTs in the germination solution decreased the germination percentage of the attached spores by 93.14%, completely inhibiting subsequent biofilm formation. The inhibition kinetics of 50 μg ml^?1 SWCNTs on biofilm formation showed that this concentration inhibited biofilm formation by 81.2% after incubation for 48 h. SWCNT treatment in the earlier stages of biofilm formation was more effective compared to treatment at later stages. Mature biofilms were highly resistant to SWCNT treatment.     

Structural and electronic properties of diazonium functionalized (4, 4) single walled carbon nanotube: an ab initio study

In this work, ab initio density functional theory (DFT) calculations are performed to study the structural and electronic properties of diazonium reagent functionalized (4, 4) single-walled carbon nanotube (SWCNT). We find the aryl group covalently bonds with SWCNT and prefers to be perpendicular to the side wall of nanotube. It has a rotational barrier of 0.35 eV around the formed aryl-tube bond axis and should be thermodynamically stable at room temperature. Additionally, new peaks appeared around the Fermi energy in the density of state (DOS) due to the weak band dispersion. Increasing of the coverage of the functional group will result in significant upshift of the Fermi level.     

Molecular dynamics simulation studies of mechanical properties of different carbon nanotube systems

Various mechanical properties of single-walled carbon nanotubes (SWCNT) and double-walled carbon nanotubes (DWCNT) are evaluated using molecular dynamics (MD) simulations. A tensioning process was first performed on a SWCNT whose interaction is based on the Brenner’s ‘second generation’ potential under varying length–diameter ratios and strain rates, in order to understand the SWCNT’s behaviour under axial tension. The results showed an increase in the SWCNT’s ultimate tensile strength and a decrease in critical strain given the conditions of increasing strain rate and a decreasing length–diameter ratio. Comparison was done with previous studies on axial tensioning of SWCNT to validate the results obtained from the set-up, based on the general stress–strain relationship and key mechanical properties such as the strain at failure and the Young’s modulus. A DWCNT was then constructed, and Lennard-Jones ‘12-6’ potential was used to describe the energy present between the nanotube layers. Extraction of the inner tube in a DWCNT was performed using two inner wall tubings of different diameters to draw comparison to the energies needed to separate fully the outer and inner tubing. Finally, a bending test was performed on two DWCNTs with different intertube separations. Insights into the entire bending process were obtained through analyses of the variations in the strain energy characteristic of the surface atoms near the bending site, as the DWCNT is gradually bent until failure.