Pilus formation and protein secretion by the same machinery in Escherichia coli

The secreton (type II secretion) and type IV pilus biogenesis branches of the general secretory pathway in Gram-negative bacteria share many features that suggest a common evolutionary origin. Five components of the secreton, the pseudopilins, are similar to subunits of type IV pili. Here, we report that when the 15 genes encoding the pullulanase secreton of Klebsiella oxytoca were expressed on a high copy number plasmid in Escherichia coli, one pseudopilin, PulG, was assembled into pilus-like bundles. Assembly of the 'secreton pilus' required most but not all of the secreton components that are essential for pullulanase secretion, including some with no known homologues in type IV piliation machineries. Two other pseudopilins, pullulanase and two outer membrane-associated secreton components were not associated with pili. Thus, PulG is probably the major component of the pilus. Expression of a type IV pilin gene, the E.coli K-12 gene ppdD, led to secreton-dependent incorporation of PpdD pilin into pili without diminishing pullulanase secretion. This is the first demonstration that pseudopilins can be assembled into pilus-like structures.     

Type IV-like pili formed by the type II secreton: specificity,composition, bundling,polar localization,and surface presentation of peptides

The secreton or type II secretion machinery of gram-negative bacteria includes several type IV pilin-like proteins (the pseudopilins) that are absolutely required for secretion. We previously reported the presence of a bundled pilus composed of the pseudopilin PulG on the surface of agar-grown Escherichia coli K-12 cells expressing the Klebsiella oxytoca pullulanase (Pul) secreton genes at high levels (N. Sauvonnet, G. Vignon, A. P. Pugsley, and P. Gounon, EMBO J. 19:2221-2228, 2000). We show here that PulG is the only pseudopilin in purified pili and that the phenomenon is not restricted to the Pul secreton reconstituted in E. coli or to PulG. For example, high-level expression of the endogenous E. coli gsp secreton genes caused production of bundled pili composed of the pseudopilin GspG, and the Pul secreton was able to form pili composed of PulG-like proteins from secreton systems of other bacteria. PulG derivatives in which the C terminus was extended by the addition of eight different peptides were also assembled into pili and functioned in secretion. Three of the C-terminal peptides were shown to be exposed along the entire length of the assembled pili. Hence, the C terminus of PulG may represent a permissive site for the insertion of immunogenic epitopes or other peptide sequences. One of these PulG variants, with a six-histidine tag at its C terminus, formed nonpolar, nonbundled pili, suggesting that bundle formation and polar localization are not correlated with the ability of PulG to function in secretion. We propose that the PulG pilus is an artifactual manifestation of a periplasmic "pseudopilus" and that cycles of pseudopilus extension and retraction within the periplasm propel pullulanase through secretin channels in the outer membrane. Abnormally long pili that extend beyond the outer membrane are produced only when pilus length control and retraction are deregulated by overproduction of the major pseudopilus subunit (PulG).     

Structure and assembly of the pseudopilin PulG

The pseudopilin PulG is one of several essential components of the type II pullulanase secretion machinery (the Pul secreton) of the Gram-negative bacterium Klebsiella oxytoca. The sequence of the N-terminal 25 amino acids of the PulG precursor is hydrophobic and very similar to the corresponding region of type IV pilins. The structure of a truncated PulG (lacking the homologous region), as determined by X-ray crystallography, was found to include part of the long N-terminal alpha-helix and the four internal anti-parallel beta-strands that characterize type IV pilins, but PulG lacks the highly variable loop region with a disulphide bond that is found in the latter. When overproduced, PulG forms flexible pili whose structural features, as visualized by electron microscopy, are similar to those of bacterial type IV pili. The average helical repeat comprises 17 PulG subunits and four helical turns. Electron microscopy and molecular modelling show that PulG probably assembles into left-handed helical pili with the long N-terminal alpha-helix tightly packed in the centre of the pilus. As in the type IV pilins, the hydrophobic N-terminal part of the PulG alpha-helix is necessary for its assembly. Subtle sequence variations within this highly conserved segment seem to determine whether or not a type IV pilin can be assembled into pili by the Pul secreton.     

Multiple interactions between pullulanase secreton components involved in stabilization and cytoplasmic membrane association of PulE

We report attempts to analyze interactions between components of the pullulanase (Pul) secreton (type II secretion machinery) from Klebsiella oxytoca encoded by a multiple-copy-number plasmid in Escherichia coli. Three of the 15 Pul proteins (B, H, and N) were found to be dispensable for pullulanase secretion. The following evidence leads us to propose that PulE, PulL, and PulM form a subcomplex with which PulC and PulG interact. The integral cytoplasmic membrane protein PulL prevented proteolysis and/or aggregation of PulE and mediated its association with the cytoplasmic membrane. The cytoplasmic, N-terminal domain of PulL interacted directly with PulE, and both PulC and PulM were required to prevent proteolysis of PulL. PulM and PulL could be cross-linked as a heterodimer whose formation in a strain producing the secreton required PulG. However, PulL and PulM produced alone could also be cross-linked in a 52-kDa complex, indicating that the secreton exerts subtle effects on the interaction between PulE and PulL. Antibodies against PulM coimmunoprecipitated PulL, PulC, and PulE from detergent-solubilized cell extracts, confirming the existence of a complex containing these four proteins. Overproduction of PulG, which blocks secretion, drastically reduced the cellular levels of PulC, PulE, PulL, and PulM as well as PulD (secretin), which probably interacts with PulC. The Pul secreton components E, F, G, I, J, K, L, and M could all be replaced by the corresponding components of the Out secretons of Erwinia chrysanthemi and Erwinia carotovora, showing that they do not play a role in secretory protein recognition and secretion specificity.     

The requirement for DsbA in pullulanase secretion is independent of disulphide bond formation in the enzyme

Results from previous studies have suggested that an intramolecular disulphide bond in the exoprotein pullulanase is needed for its recognition and transport across the outer membrane. This interpretation of the data is shown here to be incorrect: pullulanase devoid of all potential disulphide bonds is secreted with apparently the same efficiency as the wild-type protein. Furthermore, the periplasmic disulphide bond, oxidoreductase DsbA, previously shown to catalyse the formation of a disulphide bond in pullulanase and to decrease its transit time in the periplasm, is shown here to be required for the rapid secretion of pullulanase devoid of disulphide bonds. Several possible explanations for the role of DsbA in pullulanase secretion are discussed.     

Inactivation of the Pseudomonas putida KT2440 dsbA gene promotes extracellular matrix production and biofilm formation

To identify genes essential to biofilm formation in Pseudomonas putida KT2440, 12 mutants defective in oxidative stress-related or metabolic pathway-related genes were evaluated. Of them, only the dsbA mutant lacking the disulfide bond isomerase exhibited significantly increased attachment to the polystyrene surface. Visual evaluation by extracellular matrix staining and scanning electron microscopy indicated that the KT2440-Δ dsbA strain displays enhanced extracellular matrix production, rugose colony morphology on agar plates and floating pellicles in static culture. Accordingly, we propose that deletion of the dsbA gene may stimulate production of the extracellular matrix, resulting in those phenotypes. In addition, the lack of detectable fluorescence in the KT2440-Δ dsbA under UV light as well as in both the wild type and the KT2440-Δ dsbA when grown on Luria–Bertani plates containing ferrous iron suggests that the fluorescent molecule may be a fluorescent siderophore with its synthesis/secretion controlled by DsbA in KT2440. These phenotypic defects observed in the dsbA mutant were complemented by the full-length KT2440 and Escherichia coli dsbA genes. In contrast to the role of DsbA in other bacteria, our results provide the first evidence that disruption of P. putida KT2440 dsbA gene overproduces the extracellular matrix and thus promotes biofilm formation.     

Identification of a protein required for disulfide bond formation in vivo

We describe a mutation (dsbA) that renders Escherichia coli severely defective in disulfide bond formation. In dsbA mutant cells, pulse-labeled beta-lactamase, alkaline phosphatase, and OmpA are secreted but largely lack disulfide bonds. These disulfideless proteins may represent in vivo folding intermediates, since they are protease sensitive and chase slowly into stable oxidized forms. The dsbA gene codes for a 21,000 Mr periplasmic protein containing the sequence cys-pro-his-cys, which resembles the active sites of certain disulfide oxidoreductases. The purified DsbA protein is capable of reducing the disulfide bonds of insulin, an activity that it shares with these disulfide oxidoreductases. Our results suggest that disulfide bond formation is facilitated by DsbA in vivo.     

In vitro catalysis of oxidative folding of disulfide-bonded proteins by the Escherichia coli dsbA (ppfA) gene product.

It was shown previously that the Escherichia coli gene ppfA (dsbA) encodes a periplasmic protein, and its inactivation leads to a deficiency in disulfide bond formation of envelope proteins (Kamitani, S., Akiyama, Y., and Ito, K. (1992) EMBO J. 11, 57-62; Bardwell, J. C. A., McGovern, K., and Beckwith, J. (1991) Cell 67, 581-589). The DsbA/PpfA protein was overproduced, purified, and examined for its activities in vitro. Its abundance in a wild-type cell was estimated to be about 850 molecules which probably exist as homodimers as suggested by size exclusion chromatography. Purified DsbA markedly stimulated disulfide bond formation of E. coli alkaline phosphatase, either in vitro synthesized or purified and denatured, as well as of reduced bovine ribonuclease A. The DsbA-catalyzed rapid disulfide bond formation occurred after a lag period which appeared to be determined by the redox state of the reaction mixture and concentration of DsbA. Inclusion of higher concentrations of oxidized glutathione or DsbA shortened the lag period. We propose that DsbA, which proved to directly catalyze disulfide bond formation, may also have a role in maintaining the bacterial periplasm oxidative.     

DsbA Is Required for Stable Expression of Outer Membrane Protein YscC and for Efficient Yop Secretion in Yersinia pestis

The role of the periplasmic disulfide oxidoreductase DsbA in Yop secretion was investigated in Yersinia pestis. A Y. pestis dsbA mutant secreted reduced amounts of the V antigen and Yops and expressed reduced amounts of the full-sized YscC protein. Site-directed mutagenesis of the four cysteine residues present in the YscC protein resulted in defects similar to those found in the dsbA mutant. These results suggest that YscC contains at least one disulfide bond that is essential for the function of this protein in Yop secretion.     

Disulfide bond formation and secretion of Escherichia coli heat-stable enterotoxin II.

The Escherichia coli heat-stable enterotoxin II (STII) is a typical extracellular toxin consisting of 48 amino acid residues, of which 4 are cysteine. There are two disulfide bonds, one between Cys-10 and Cys-48 and one between Cys-21 and Cys-36. We examined the involvement of DsbA in the formation of the disulfide bonds of STII and the role of each in the secretion of STII. A dsbA mutant was transformed with a plasmid harboring the STII gene, and STII was not detected either in the cells or in the culture supernatant. Reducing the level of STII brought about the dsbA mutation restored by introducing the wild-type dsbA gene into the mutant strain. These results showed that DsbA is involved in forming the disulfide bonds of STII and that STII without these disulfide bonds is degraded during secretion. We substituted these four cysteine residues in vivo by oligonucleotide-directed site-specific mutagenesis. The amino acid sequence of the purified STII (C48S) and pulse-chase studies revealed that two intermolecular disulfide bonds must be formed to be efficiently secreted and that cleavage between amino acid residues 14 and 15 is probably the first step in the proteolytic degradation of STII.     

A mutation in either dsbA or dsbB, a gene encoding a component of a periplasmic disulfide bond-catalyzing system, is required for high-level expression of the Bacteroides fragilis metallo-beta-lactamase, CcrA, in Escherichia coli.

The metallo-beta-lactamase gene, ccrA, from Bacteroides fragilis is functionally expressed in Escherichia coli only in the presence of a genomic mutation in iarA or iarB (increased ampicillin resistance), identified in this study as dsbA or dsbB, respectively. DsbA and DsbB are components of a periplasmic protein disulfide bond-catalyzing system. Data indicated that DsbA interacted with CcrA, creating aberrant disulfide bond linkages that render CcrA proteolytically unstable. Mutations in dsbA or dsbB permissive for CcrA expression eliminated or greatly reduced DsbA activity, allowing CcrA to assume a disulfide bond-free and proteolytically stable conformation.     

Characterization of DsbC, a periplasmic protein of Erwinia chrysanthemi and Escherichia coli with disulfide isomerase activity.

We identified and characterized an Erwinia chrysanthemi gene able to complement an Escherichia coli dsbA mutation that prevents disulfide bond formation in periplasmic proteins. This gene, dsbC, codes for a 24 kDa periplasmic protein that contains a characteristic active site sequence of disulfide isomerases, Phe-X-X-X-X-Cys-X-X-Cys. Besides the active site, DsbC has no homology with DsbA, thioredoxin or eukaryotic protein disulfide isomerase and it could define a new subfamily of disulfide isomerases. Purified DsbC protein is able to catalyse insulin oxidation in a dithiothreitol dependent manner. The E.coli gene xprA codes for a protein functionally equivalent to DsbC. The in vivo function of DsbC seems to be the formation of disulfide bonds in proteins. The presence of XprA could explain the residual disulfide isomerase activity existing in dsbA mutants. Re-oxidation of XprA does not seem to occur through DsbB, the protein that probably re-oxidizes DsbA.     

Signal recognition particle-dependent inner membrane targeting of the PulG Pseudopilin component of a type II secretion system

The pseudopilin PulG is an essential component of the pullulanase-specific type II secretion system from Klebsiella oxytoca. PulG is the major subunit of a short, thin-filament pseudopilus, which presumably elongates and retracts in the periplasm, acting as a dynamic piston to promote pullulanase secretion. It has a signal sequence-like N-terminal segment that, according to studies with green and red fluorescent protein chimeras, anchors unassembled PulG in the inner membrane. We analyzed the early steps of PulG inner membrane targeting and insertion in Escherichia coli derivatives defective in different protein targeting and export factors. The beta-galactosidase activity in strains producing a PulG-LacZ hybrid protein increased substantially when the dsbA, dsbB, or all sec genes tested except secB were compromised by mutations. To facilitate analysis of native PulG membrane insertion, a leader peptidase cleavage site was engineered downstream from the N-terminal transmembrane segment (PrePulG*). Unprocessed PrePulG* was detected in strains carrying mutations in secA, secY, secE, and secD genes, including some novel alleles of secY and secD. Furthermore, depletion of the Ffh component of the signal recognition particle (SRP) completely abolished PrePulG* processing, without affecting the Sec-dependent export of periplasmic MalE and RbsB proteins. Thus, PulG is cotranslationally targeted to the inner membrane Sec translocase by SRP.     

Extracellular DsbA-insensitive folding of Escherichia coli heat-stable enterotoxin STa in vitro

To study the folding of human Escherichia coli heat-stable enterotoxin STh, we used the major protein subunit of CS31A fimbriae (ClpG) as a marker of STh secretion and a provider of a signal peptide. We established that STh genetically fused to the N or C terminus of ClpG was able to mobilize ClpG to the culture supernatant while still retaining full enterotoxicity. These features indicate that the STh activity was not altered by the chimeric structure and suggest that spatial conformation of STh in the fusion is close to that of the native toxin, thus permitting recognition and activation of the intestinal STh receptor in vivo. In contrast to other studies, we showed that disulfide bond formation did not occur in the periplasm through the DsbA pathway and that there was no correlation between DsbA and secretion, folding, or activity. This discrepancy was not attributable to the chimeric nature of STh since there was no effect of dsbA or dsbB mutations on secretion and activity of recombinant STh from which ClpG had been deleted. Periplasmic and lysate fractions of dsbA(+) and dsbA(-) cells did not have any STh activity. In addition, the STh chimera was exclusively found in an inactive reduced form intracellularly and in an active oxidized form extracellularly, irrespective of the dsbA background. Subsequently, a time course experiment in regard to the secretion of STh from both dsbA(+) and dsbA(-) cells indicated that the enterotoxin activity (proper folding) in the extracellular milieu increased with time. Overall, these findings provide evidence that STa toxins can be cell-released in an unfolded state before being completely disulfide-bonded outside the cell.     

Effect of sequences of the active-site dipeptides of DsbA and DsbC on in vivo folding of multidisulfide proteins in Escherichia coli

We have examined the role of the active-site CXXC central dipeptides of DsbA and DsbC in disulfide bond formation and isomerization in the Escherichia coli periplasm. DsbA active-site mutants with a wide range of redox potentials were expressed either from the trc promoter on a multicopy plasmid or from the endogenous dsbA promoter by integration of the respective alleles into the bacterial chromosome. The dsbA alleles gave significant differences in the yield of active murine urokinase, a protein containing 12 disulfides, including some that significantly enhanced urokinase expression over that allowed by wild-type DsbA. No direct correlation between the in vitro redox potential of dsbA variants and the urokinase yield was observed. These results suggest that the active-site CXXC motif of DsbA can play an important role in determining the folding of multidisulfide proteins, in a way that is independent from DsbA's redox potential. However, under aerobic conditions, there was no significant difference among the DsbA mutants with respect to phenotypes depending on the oxidation of proteins with few disulfide bonds. The effect of active-site mutations in the CXXC motif of DsbC on disulfide isomerization in vivo was also examined. A library of DsbC expression plasmids with the active-site dipeptide randomized was screened for mutants that have increased disulfide isomerization activity. A number of DsbC mutants that showed enhanced expression of a variant of human tissue plasminogen activator as well as mouse urokinase were obtained. These DsbC mutants overwhelmingly contained an aromatic residue at the C-terminal position of the dipeptide, whereas the N-terminal residue was more diverse. Collectively, these data indicate that the active sites of the soluble thiol- disulfide oxidoreductases can be modulated to enhance disulfide isomerization and protein folding in the bacterial periplasmic space.     

Two periplasmic disulfide oxidoreductases, DsbA and SrgA, target outer membrane protein SpiA, a component of the Salmonella pathogenicity island 2 type III secretion system

The formation of disulfide is essential for the folding, activity, and stability of many proteins secreted by Gram-negative bacteria. The disulfide oxidoreductase, DsbA, introduces disulfide bonds into proteins exported from the cytoplasm to periplasm. In pathogenic bacteria, DsbA is required to process virulence determinants for their folding and assembly. In this study, we examined the role of the Dsb enzymes in Salmonella pathogenesis, and we demonstrated that DsbA, but not DsbC, is required for the full expression of virulence in a mouse infection model of Salmonella enterica serovar Typhimurium. Salmonella strains carrying a dsbA mutation showed reduced function mediated by type III secretion systems (TTSSs) encoded on Salmonella pathogenicity islands 1 and 2 (SPI-1 and SPI-2). To obtain a more detailed understanding of the contribution of DsbA to both SPI-1 and SPI-2 TTSS function, we identified a protein component of the SPI-2 TTSS apparatus affected by DsbA. Although we found no substrate protein for DsbA in the SPI-1 TTSS apparatus, we identified SpiA (SsaC), an outer membrane protein of SPI-2 TTSS, as a DsbA substrate. Site-directed mutagenesis of the two cysteine residues present in the SpiA protein resulted in the loss of SPI-2 function in vitro and in vivo. Furthermore, we provided evidence that a second disulfide oxidoreductase, SrgA, also oxidizes SpiA. Analysis of in vivo mixed infections demonstrated that a Salmonella dsbA srgA double mutant strain was more attenuated than either single mutant, suggesting that DsbA acts in concert with SrgA in vivo.     

The secretin-specific, chaperone-like protein of the general secretory pathway: separation of proteolytic protection and piloting functions

The chaperone-like protein of the main terminal branch of the general secretory pathway from Klebsiella oxytoca , the outer membrane lipoprotein PulS, protects the multimeric secretin PulD from degradation and promotes its correct localization to the outer membrane. To determine whether these are separable functions, or whether resistance to proteolysis results simply from correct localization of PulD, we replaced the lipoprotein-type signal peptide of PulS by the signal peptide of periplasmic maltose-binding protein. The resulting periplasmic PulS retained its ability to protect PulD, but not its ability to localize PulD to the outer membrane and to function in pullulanase secretion. Periplasmic PulS competed with wild-type PulS to prevent pullulanase secretion, presumably again by causing mislocalization of PulD. A hybrid protein comprising the mature part of PulS fused to the C-terminus of full-length maltose-binding protein (MalE–PulS) had similar properties to the periplasmic PulS protein. Moreover, MalE–PulS was shown to associate with PulD by amylose-affinity chromatography. The MalE–PulS hybrid was rendered completely functional (i.e. it restored pullulanase secretion in a pulS mutant) by replacing its signal peptide with a lipoprotein-type signal peptide. However, this fatty-acylated hybrid protein was only functional if it also carried a lipoprotein sorting signal that targeted it to the outer membrane. Thus, the two functions of PulS are separate and fully dissociable. Incorrect localization, rather than proteolysis, of PulD in the absence of PulS was shown to be the factor that causes high-level induction of the phage shock response. The Erwinia chrysanthemi PulS homologue, OutS, can substitute for PulS, and PulS can protect the secretin OutD from proteolysis in Escherichia coli , indicating the possible existence of a family of PulS-like chaperone proteins.