Electrochemical Regeneration of Fe(III) To Support Growth on Anaerobic Iron Respiration

Here we describe artificial help for the respiratory electron flow supporting anaerobic growth of Thiobacillus ferrooxidans through exogenous electrolysis. Flux between H₂ and a anode through cells was accomplished with electrochemical regeneration of iron. The electrochemical help resulted in a 12-fold increase in yield compared with the yield observed in its absence.     

Electrochemical regeneration of NAD in a plug-flow reactor

Electrochemical regeneration of NAD was performed at a laboratory preparative scale to illustrate both the efficiency and intrinsic simplicity of the electrochemical method. A powerful plug-flow reactor was realized with a flow through graphite felt electrode, the ratio of the effective area of electrode/volume of reactor increased to 380 cm(2)/cm(3). This graphite-felt electrode was able to oxidize NADH coenzyme at a very low overvoltage. On the example of the gluconic acid production catalyzed by glucose dehydrogenase, current as high as 0.1 A was obtained in experience where enzymatic activity was the main limitation. In confirmation of our previous work, the results show that the yield of NADH electrochemical oxidation is better than 99.95%.     

Electrochemical Reduction of Carbon Dioxide on Pyrite as a Pathway for Abiogenic Formation of Organic Molecules

A wide spectrum of electrode potentials of minerals that compose sulfide ores enables the latter, when in contact with hydrothermal solutions, to form galvanic pairs with cathode potentials sufficient for electrochemical reduction of CO2. The experiments performed demonstrated the increase of cathode current on the rotating pyrite disc electrode in a range of potentials more negative than -800 mV in presence of CO2. In high-pressure experiments performed in a specially designed electrochemical cell equipped with a pyrite cathode and placed into autoclave, accumulation of formate was demonstrated after 24 hr passing of CO2 (50 atm, room temperature) through electrolyte solution. The formation of this product started on increasing the cathode potential to -800 mV (with respect to saturated silver chloride electrode). The yield grew exponentially upon cathode potential increase up to -1200 mV. The maximum current efficiency (0.12%) was registered at cathode potentials of about -1000 mV. No formate production was registered under normal atmospheric pressure and in the absence of imposed cathode potential. Neither in experiments, nor in control was formaldehyde found. It is proposed that the electrochemical reduction of CO2 takes part in the formation of organic molecules in hydrothermal solutions accompanying sulfide ore deposits and in 'black smokers' on the ocean floor.     

The electrochemical regeneration of NAD(+) revisited

An actual yield of 99.97% (i.e., 3000 potential regenerating cycles) has been obtained for the electrochemical regeneration of NAD(+). The deactivation of the coenzyme is not related to the number of cycles; it is only time dependent. For biotechnological applications, these results show that electrochemical regeneration can compete with enzymatic regeneration for selective oxidation by dehydrogenases.     

Energization of amino acid uptake by system A in cultured human fibroblasts

The energization of System A in cultured human fibroblasts has been studied by measuring the energy transfer from the electrochemical gradient of Na+ to the chemical gradient of the site A-specific substrate amino acid 2-methylaminoisobutyric acid. The co-transport Na+/amino acid, studied by kinetic analysis and radiochemical measurements, showed a coupling ratio of 1:1. The assessment of the Na+ electrochemical gradient in cultured adherent cells relied on the development of noninvasive procedures as follows: the membrane electrical potential was estimated from the accumulation of L-arginine at equilibrium (Bussolati, O., Laris, P. C., Nucci, F. A., Dall'Asta, V., Longo, N., Guidotti, G. G., and Gazzola, G. C. (1987) Am. J. Physiol. 253, C391-C397); the chemical gradient of Na+ was determined from spectrometric measurements of Na+. The accumulation of 2-methylaminoisobutyric acid was strongly sensitive to changes of Na+ gradient and of membrane electrical potential, indicating that the electrochemical gradient of Na+ contributed energy for the uphill transport of the amino acid through System A. Changes in the Na+ electrochemical gradient were obtained by: (i) alterations of extracellular concentration of Na+; (ii) changes of membrane electrical potential obtained by variation of extracellular [K+]; and (iii) changes of [Na+]in and membrane electrical potential upon incubation of the cells in serum-free saline solutions (Dall'Asta, V., Gazzola, G. C., Longo, N., Bussolati, O., Franchi-Gazzola, R., and Guidotti, G. G. (1986) Biochim. Biophys. Acta 860, 1-8). The correlation between the chemical gradient of 2-methylaminoisobutyric acid and the Na+ electrochemical potential followed a straight line with a yield close to the thermodynamic equilibrium, thus suggesting that the energy stored in the gradient of Na+ electrochemical potential is fully adequate to energize the intracellular accumulation of site A-reactive amino acids in human fibroblasts.     

Efficiency of multi-trait,indirect, and trait-assisted genomic selection for improvement of biomass sorghum

Key message

We compare genomic selection methods that use correlated traits to help predict biomass yield in sorghum, and find that trait-assisted genomic selection performs best.

Abstract

Genomic selection (GS) is usually performed on a single trait, but correlated traits can also help predict a focal trait through indirect or multi-trait GS. In this study, we use a pre-breeding population of biomass sorghum to compare strategies that use correlated traits to improve prediction of biomass yield, the focal trait. Correlated traits include moisture, plant height measured at monthly intervals between planting and harvest, and the area under the growth progress curve. In addition to single- and multi-trait direct and indirect GS, we test a new strategy called trait-assisted GS, in which correlated traits are used along with marker data in the validation population to predict a focal trait. Single-trait GS for biomass yield had a prediction accuracy of 0.40. Indirect GS performed best using area under the growth progress curve to predict biomass yield, with a prediction accuracy of 0.37, and did not differ from indirect multi-trait GS that also used moisture information. Multi-trait GS and single-trait GS yielded similar results, indicating that correlated traits did not improve prediction of biomass yield in a standard GS scenario. However, trait-assisted GS increased prediction accuracy by up to \(50\%\) when using plant height in both the training and validation populations to help predict yield in the validation population. Coincidence between selected genotypes in phenotypic and genomic selection was also highest in trait-assisted GS. Overall, these results suggest that trait-assisted GS can be an efficient strategy when correlated traits are obtained earlier or more inexpensively than a focal trait.

     

Electrochemical DNA biosensor for bovine papillomavirus detection using polymeric film on screen-printed electrode

A new electrochemical DNA biosensor for bovine papillomavirus (BPV) detection that was based on screen-printed electrodes was comprehensively studied by electrochemical methods of cyclic voltammetry (CV) and differential pulse voltammetry (DPV). A BPV probe was immobilised on a working electrode (gold) modified with a polymeric film of poly-L-lysine (PLL) and chitosan. The experimental design was carried out to evaluate the influence of polymers, probe concentration (BPV probe) and immobilisation time on the electrochemical reduction of methylene blue (MB). The polymer poly-L-lysine (PLL), a probe concentration of 1μM and an immobilisation time of 60min showed the best result for the BPV probe immobilisation. With the hybridisation of a complementary target sequence (BPV target), the electrochemical signal decreased compared to a BPV probe immobilised on the modified PLL-gold electrode. Viral DNA that was extracted from cattle with papillomatosis also showed a decrease in the MB electrochemical reduction, which suggested that the decreased electrochemical signal corresponded to a bovine papillomavirus infection. The hybridisation specificity experiments further indicated that the biosensor could discriminate the complementary sequence from the non-complementary sequence. Thus, the results showed that the development of analytical devices, such as a biosensor, could assist in the rapid and efficient detection of bovine papillomavirus DNA and help in the prevention and treatment of papillomatosis in cattle.     

Coupling of electrochemical and optical measurements in a microtiter plate for the fast development of electro enzymatic processes with P450s

Electro enzymatic processes offer novel opportunities in catalysis by combining advantages of enzyme catalysis and electrochemistry. An efficient electrochemical cofactor substitution system can help to overcome economical hurdles for the technical use of cofactor dependent enzymes. The in vitro biocatalysis with P450 BM-3 was investigated aiming for the substitution of the expensive natural cofactor NADPH by electrochemistry as “electron source”. An electrochemical 24-well microtiter plate (eMTP) was developed, which can be employed in a standard microtiter plate reader and enables parallelized electrochemical experiments in combination with simultaneous optical measurements. The eMTP was applied to screen a P450 monooxygenase BM-3 mutein library and determine the behavior of P450 BM-3 muteins in an electrochemically driven surrogate assay with the mediator cobalt sepulchrate. Besides determining reaction rates also the influence of single reaction parameters e.g. applied potential, enzyme and mediator concentration were measured. Additionally the developed eMTP based screening system allows a fast development of an electro enzymatic process.     

Experimental evidence for proton motive force-dependent catalysis by the diheme-containing succinate:menaquinone oxidoreductase from the Gram-positive bacterium Bacillus licheniformis

In Gram-positive bacteria and other prokaryotes containing succinate:menaquinone reductases, it has previously been shown that the succinate oxidase and succinate:menaquinone reductase activities are lost when the transmembrane electrochemical proton potential, Deltap, is abolished by the rupture of the bacteria or by the addition of a protonophore. It has been proposed that the endergonic reduction of menaquinone by succinate is driven by the electrochemical proton potential. Opposite sides of the cytoplasmic membrane were envisaged to be separately involved in the binding of protons upon the reduction of menaquinone and their release upon succinate oxidation, with the two reactions linked by the transfer of two electrons through the enzyme. However, it has previously been argued that the observed Deltap dependence is not associated specifically with the succinate:menaquinone reductase. Definitive insight into the mechanism of catalysis of this reaction requires a corresponding functional characterization of an isolated, membrane-bound succinate:menaquinone reductase from a Gram-positive bacterium. Here, we describe the purification, reconstitution into proteoliposomes, and functional characterization of the diheme-containing succinate:menaquinone reductase from the Gram-positive bacterium Bacillus licheniformis and, with the help of the design, synthesis, and characterization of quinones with finely tuned oxidation/reduction potentials, provide unequivocal evidence for Deltap-dependent catalysis of succinate oxidation by quinone as well as for Deltap generation upon catalysis of fumarate reduction by quinol.     

Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review

Three‐dimensional (3D) printing, a layer‐by‐layer deposition technology, has a revolutionary role in a broad range of applications. As an emerging advanced fabrication technology, it has drawn growing interest in the field of electrochemical energy storage because of its inherent advantages including the freeform construction and controllable 3D structural prototyping. This article focuses on the topic of 3D‐printed electrochemical energy storage devices (EESDs), which bridge advanced electrochemical energy storage and future additive manufacturing. Basic 3D printing systems and material considerations are described to provide a fundamental understanding of printing technologies for the fabrication of EESDs. The performance metrics of 3D‐printed EESDs are then given and the related performance optimization strategies are discussed. Next, the recent advances of 3D‐printed EESDs, including sandwich‐type and in‐plane architectures, are summarized. Conclusions and future perspectives with some unique challenges and important directions are then discussed. It can be expected that, with the help of 3D printing technology, the development of advanced electrochemical energy storage systems will be greatly promoted.     

Heat Stress in Wheat during Reproductive and Grain-Filling Phases

Ambient temperatures have increased since the beginning of the century and are predicted to continue rising under climate change. Such increases in temperature can cause heat stress: a severe threat to wheat production in many countries, particularly when it occurs during reproductive and grain-filling phases. Heat stress reduces plant photosynthetic capacity through metabolic limitations and oxidative damage to chloroplasts, with concomitant reductions in dry matter accumulation and grain yield. Genotypes expressing heat shock proteins are better able to withstand heat stress as they protect proteins from heat-induced damage. Heat tolerance can be improved by selecting and developing wheat genotypes with heat resistance. Wheat pre-breeding and breeding may be based on secondary traits like membrane stability, photosynthetic rate and grain weight under heat stress. Nonetheless, improvement in grain yield under heat stress implies selecting genotypes for grain size and rate of grain filling. Integrating physiological and biotechnological tools with conventional breeding techniques will help to develop wheat varieties with better grain yield under heat stress during reproductive and grain-filling phases. This review discusses the impact of heat stress during reproductive and grain-filling stages of wheat on grain yield and suggests strategies to improve heat stress tolerance in wheat.     

Electrochemical Characteristics of Nitro-Heterocyclic Compounds of Biological Interest. II. Nitrosochloramphenicol

The electrochemical Characteristics of nitrosochloramphenicol have been studied in aqueous buffer systems (pH 7.1) using direct current (d.c.) and differential pulse polarography. cyclic voltammetry and coulometric techniques. Up to 4 charge-transfer steps can be identified. The first reduction step is reversible both chemically and electrochemically. the charge-transfer product showing no tendency to undergo further reaction on the electrochemical time-scale. In contrast, the second reduction step is irreversible, with the product undergoing a fast following reaction to yield a redox-active species which was detected by cyclic voltammetry. From the data and by comparison with related systems. two reduction mechanisms are possible and are discussed.     

Electrochemical Characteristics of Nitro-Heterocyclic Compounds of Biological Interest. II. Nitrosochloramphenicol

The electrochemical Characteristics of nitrosochloramphenicol have been studied in aqueous buffer systems (pH 7.1) using direct current (d.c.) and differential pulse polarography. cyclic voltammetry and coulometric techniques. Up to 4 charge-transfer steps can be identified. The first reduction step is reversible both chemically and electrochemically. the charge-transfer product showing no tendency to undergo further reaction on the electrochemical time-scale. In contrast, the second reduction step is irreversible, with the product undergoing a fast following reaction to yield a redox-active species which was detected by cyclic voltammetry. From the data and by comparison with related systems. two reduction mechanisms are possible and are discussed.     

Interaction of nucleic acids with electrically charged surfaces. VI. A comparative study on the electrochemical behaviour of native and denatured DNAs at graphite electrodes.

Adsorption and electrochemical oxidation of deoxyribonucleic acid (DNA) at a pyrolytic graphite electrode (PGE) and a paraffin wax-impregnated spectroscopic graphite electrode (WISGE) were studied using differential pulse voltammetry. DNA is adsorbed at the surface of the graphite electrodes in a broad range of potentials including the potentials of electrochemical oxidation of DNA. Both native and denatured DNAs yield two single, well-defined and separated peaks, G and A, on the differential pulse voltammograms at the PGE and WISGE. The more negative peak, G, corresponds to electrochemical oxidation of adenine residues. Peaks G and A of native DNA occur at the same potentials as peaks G and A of denatured DNA. However, electrochemical oxidation of adenine and guanine residues at graphite electrodes is markedly suppressed in native DNA. The heights of the peaks G and A represent a sensitive indicator of the helix-coil transition of DNA. An analysis of the product of interaction of a sample of native DNA with a large pyrolytic graphite electrode in the presence of formaldehyde at approximately neutral pH did not prove changes in the secondary structure of native DNA due to its interaction with the graphite electrode. It is suggested that the decreased differential pulse-voltammetric activity of native DNA is connected with its decreased flexibility.     

Elucidating the Irreversible Mechanism and Voltage Hysteresis in Conversion Reaction for High‐Energy Sodium–Metal Sulfide Batteries

Irreversible electrochemical behavior and large voltage hysteresis are commonly observed in battery materials, in particular for materials reacting through conversion reaction, resulting in undesirable round‐trip energy loss and low coulombic efficiency. Seeking solutions to these challenges relies on the understanding of the underlying mechanism and physical origins. Here, this study combines in operando 2D transmission X‐ray microscopy with X‐ray absorption near edge structure, 3D tomography, and galvanostatic intermittent titration techniques to uncover the conversion reaction in sodium–metal sulfide batteries, a promising high‐energy battery system. This study shows a high irreversible electrochemistry process predominately occurs at first cycle, which can be largely linked to Na ion trapping during the first desodiation process and large interfacial ion mobility resistance. Subsequently, phase transformation evolution and electrochemical reaction show good reversibility at multiple discharge/charge cycles due to materials' microstructural change and equilibrium. The origin of large hysteresis between discharge and charge is investigated and it can be attributed to multiple factors including ion mobility resistance at the two‐phase interface, intrinsic slow sodium ion diffusion kinetics, and irreversibility as well as ohmic voltage drop and overpotential. This study expects that such understandings will help pave the way for engineering design and optimization of materials microstructure for future‐generation batteries.     

棉纤维分化起始的分子生物学研究进展

棉纤维的分化起始是棉纤维形态建成的初始阶段,对棉纤维的产量和质量有重要影响。本文对棉纤维细胞起始分化的时空顺序、影响因素以及近年来棉纤维分化起始在分子水平上的研究进展进行了综述,以阐明细胞分化的内在机理,为通过遗传工程途径人为控制棉纤维生长发育、选育优良农艺性状的新种质提供依据。     

Interaction of nucleic acids with electrically charged surfaces. VI. A comparative study on the electrochemical behaviour of native and denatured DNAs at graphite electrodes

Adsorption and electrochemical oxidation of deoxyribonucleic acid (DNA) at a pyrolytic graphite electrode (PGE) and a paraffin wax-impregnated spectroscopic graphite electrode (WISGE) were studied using differential pulse voltammetry. DNA is adsorbed at the surface of the graphite electrodes in a broad range of potentials including the potentials of electrochemical oxidation of DNA. Both native and denatured DNAs yield two single, well-defined and separated peaks, G and A, on the differential pulse voltammograms at the PGE and WISGE. The more negative peak, G, corresponds to electrochemical oxidation of guanine residues, whereas the more positive peak, A, corresponds to electrochemical oxidation of adenine residues. Peaks G and A of native DNA occur at the same potentials as peaks G and A of denatured DNA. However, electrochemical oxidation of adenine and guanine residues at graphite electrodes is markedly suppressed in native DNA. The heights of the peaks G and A represent a sensitive indicator of the helix-coil transition of DNA. An analysis of the product of interaction of a sample of native DNA with a large pyrolytic graphite electrode in the presence of formaldehyde at approximately neutral pH did not prove changes in the secondary structure of native DNA due to its interaction with the graphite electrode. It is suggested that the decreased differential pulse-voltammetric activity of native DNA is connected with its decreased flexibility.     

Plasma-activated carbon nanotube-based high sensitivity immunosensors for monitoring Legionella pneumophila by direct detection of maltose binding protein peptidoglycan-associated lipoprotein (MBP-PAL)

Transferred multi-walled carbon nanotube (MWCNT)-modified platinum thin-film immunosensing electrode material was engineered on a glass substrate and fabricated a fully-integrated electrochemical three-electrode system for monitoring Legionella pneumophila. The transferred MWCNT film was treated with oxygen plasma to improve its electrochemical response and electrical conductivity. We voltammetrically characterized and optimized the electrochemical performance of the fabricated electrode for direct detection of Legionella pneumophila-specific peptidoglycan-associated lipoprotein (PAL) and maltose binding protein (MBP) peptidoglycan-associated lipoprotein (MBP-PAL) fusion. The latter, as an intermediate product to yield the former, has important roles in the growth and purification of PAL, which commercial enzyme-linked immunosorbent assay (ELISA) kits require as a target substrate. Consequently, direct electrochemical detection of MBP-PAL compared to PAL by square-wave voltammetry showed a greater than 50% increase in sensitivity with a lower detection limit of 5 pg mL(-1). We also investigated the affinity properties by determining kinetic parameters of the PAL and the MBP-PAL in relation to polyclonal antibodies immobilized on transferred MWCNT substrates using Michaelis-Menten assumptions and a Hanes-Woolf plot. This new method presented herein could save the time and effort for the separation and purification of PAL form MBP-PAL fusions that are required for performing ELISA-based immunoassay.     

The Prospect of Purple Non-Sulfur (PNS) Photosynthetic Bacteria for Hydrogen Production: The Present State of the Art

Hydrogen is the fuel for the future, mainly due to its recyclability and nonpolluting nature. Biological hydrogen production processes are operated at ambient temperature and atmospheric pressures, thus are less energy intensive and more environmentally friendly as compared to thermochemical and electrochemical processes. Biohydrogen processes can be broadly classified as: photofermentation and dark fermentation. Two enzymes namely, nitrogenase and hydrogenase play an important role in biohydrogen production. Photofermentation by Purple Non-Sulfur bacteria (PNS) is a major field of research through which the overall yield for biological hydrogen production can be improved significantly by optimization of growth conditions and immobilization of active cells. The purpose of this paper is to review various processes of biohydrogen production using PNS bacteria along with several current developments. However, suitable process parameters such as carbon and nitrogen ratio, illumination intensity, bioreactor configuration and inoculum age may lead to higher yields of hydrogen generation using PNS bacteria.