首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Two populations [an F2 and a set of 77 double haploid lines (DHLs)] developed from a cross between a Piel de Sapo cultivar (PS) and the exotic Korean accession PI 161375 were used to detect QTLs involved in melon fruit quality traits: earliness (EA), fruit shape (FS), fruit weight (FW) and sugar content (SSC); and loci involved in the colour traits: external colour (ECOL) and flesh colour (FC). High variation was found, showing transgressive segregations for all traits. The highest correlation among experiments was observed for FS and the lowest for FW and SSC. Correlations among traits within experiments were, in general, not significant. QTL analysis, performed by Composite Interval Mapping, allowed the detection of nine QTLs for EA, eight for FS, six for FW and five for SSC. Major QTLs (R 2>25%) were detected for all traits. QTLs for different traits were no clearly co-localised, suggesting low pleiotropic effects at QTLs. Sixty-one per cent of them were detected in two or more experiments. QTLs for FS were detected in more trials than QTLs for FW and SSC, confirming that FS is under highly hereditable polygenic control. ECOL segregated as yellow:green in both experimental populations. The genetic control of ECOL was found to be complex, probably involving more than two loci with epistatic interactions. One of these loci was mapped on linkage group 9, but the other loci could not be clearly resolved. FC segregated as white:green:orange. The locus responsible for the green FC was mapped on linkage group 1, and it was proposed to correspond to the previously described locus gf. The genetic control of orange FC was complex: two loci in linkage groups 2 and 12 were associated with orange flesh, but larger population sizes would be necessary to elucidate completely the genetic control of orange flesh in this cross. Exotic alleles from PI161375 showed beneficial effects on EA, FW and SSC, indicating the usefulness of PI 161375 as a new source of genetic variability to improve European and American cultivars.Communicated by H.F. Linskens  相似文献   

2.
BACKGROUND: The objective of this study was to dissect into quantitative trait loci (QTLs) the large morphological and physiological differences between cultivated azuki bean (Vigna angularis) and a wild relative and to infer the commonalities of the QTLs for domestication-related traits across the Asian Vigna and with other warm-season legumes. METHODS: Two linkage maps, for the BC(1)F(1) and F(2) populations, respectively, from the same cross between azuki bean and V. nepalensis were developed. Using these linkage maps QTLs for 33 domestication-related traits were analysed and mapped. The location of mapped QTLs was compared with locations of similar QTLs in other warm-season legumes. KEY RESULTS: QTLs were detected for seed-, pod-, stem- and leaf-related traits. Most traits were controlled by between two and nine QTLs but several traits, such as pod dehiscence, were controlled by single genes. QTLs for domestication-related traits were restricted to particular regions of the azuki bean genome, especially linkage groups 1, 2, 4, 7 and 9. Linkage groups 1 and 2 had QTLs for a suite of traits including pod size, germination, seed size and lower stem length. QTLs on linkage groups 7 and 9 were associated with upper stem length, maximum leaf size and pod and seed size. Pleiotropy or close linkage of genes for domestication-related traits is suggested in these regions. While some QTLs are common to azuki bean and other warm-season legumes, many are recorded for the first time in azuki bean. CONCLUSIONS: QTLs for a large number of domestication-related traits have been mapped for the first time in azuki bean. QTLs with unexpected effect and new QTLs for traits such as seed size have been found. The results provide a foundation that will be useful for improvement of azuki bean and related legumes.  相似文献   

3.
The F1 population “Harostar”?×?“Rouge de Mauves” was used to perform a quantitative trait loci (QTL) mapping for tree architecture traits (i.e., tree diameter, total branch number, tree shape); time to initial reproductive bud break; and fruit quality traits (i.e., ground color, fruit form, soluble solid content) using data collected from 2010 to 2012. For architectural traits, interval mapping detected QTLs only in “Rouge de Mauves” on linkage group 1 for trunk diameter in 2010, on LG6 for total branch number in 2010, and on LG1 and LG5 for tree shape for both years 2010 and 2011 combined. QTLs were detected only in “Harostar” for time to initial reproductive bud break on LG1 and LG4 in 2011. For fruit quality traits, data were collected in 2011 and 2012. QTLs were identified on LG1 in 2011 and on LG4 in 2012 for soluble solid content, on LG3 for ground color in both years, on LG7 only in 2011, and on LG3 for fruit form in both years. The QTLs that we identified were compared to those previously identified in other Prunus spp.  相似文献   

4.
Smaragdov MG 《Genetika》2006,42(1):5-21
The review presents a definition of loci controlling quantitative traits (quantitative trait loci, QTLs) and localization of all currently known QTLs responsible for milk production traits in dairy cattle. The QTL number and chromosome localization are verified, with special reference to chromosomes 1, 3, 6, 14, 20, and 23. In a number of cases, close location of QTLs for mastitis and for milk production traits was found. Some aspects of QTL pleiotropy and epistasis are discussed and mapping methods of major QTLs are listed.  相似文献   

5.
I Paran  I Goldman  D Zamir 《Génome》1997,40(2):242-248
Quantitative trait loci (QTLs) influencing morphological traits were identified by restriction fragment length polymorphism (RFLP) analysis in a population of recombinant inbred lines (RILs) derived from a cross of the cultivated tomato Lycopersicon esculentum with a related wild species, Lycopersicon cheesmanii. One hundred and thirty-two RFLP loci spaced throughout the tomato genome were used as DNA probes on genomic DNA from 97 RIL families. Morphological traits, including plant height, plant fresh mass, number of branches, number of nodes, first flower-bearing node, and leaf length, were evaluated in two controlled environment trials in 1992 and 1993. QTLs were detected via regression analyses at multiple marker loci for each morphological trait. A total of 41 markers were significantly associated with the traits examined. Large additive effects were measured at many of these loci. QTLs for multiple traits were detected on chromosomes 3 (TG74) and 4 (CT188), suggesting the possible association of these chromosome segments with genes controlling growth and development in tomato. These chromosomal regions were also associated with multiple morphological traits in a L. esculentum x Lycopersicon pennellii cross. A total of 13% of the QTLs identified for traits common to both studies occupied similar map positions.  相似文献   

6.
Development of high-yielding wheat varieties with good end-use quality has always been a major concern for wheat breeders. To genetically dissect quantitative trait loci (QTLs) for yield-related traits such as grain yield, plant height, maturity, lodging, test weight and thousand-grain weight, and for quality traits such as grain and flour protein content, gluten strength as evaluated by mixograph and SDS sedimentation volume, an F1-derived doubled haploid (DH) population of 185 individuals was developed from a cross between a Canadian wheat variety “AC Karma” and a breeding line 87E03-S2B1. A genetic map was constructed based on 167 marker loci, consisting of 160 microsatellite loci, three HMW glutenin subunit loci: Glu-A1, Glu-B1 and Glu-D1, and four STS-PCR markers. Data for investigated traits were collected from three to four environments in Manitoba, Canada. QTL analyses were performed using composite interval mapping. A total of 50 QTLs were detected, 24 for agronomic traits and 26 for quality-related traits. Many QTLs for correlated traits were mapped in the same genomic regions forming QTL clusters. The largest QTL clusters, consisting of up to nine QTLs, were found on chromosomes 1D and 4D. HMW glutenin subunits at Glu-1 loci had the largest effect on breadmaking quality; however, other genomic regions also contributed genetically to breadmaking quality. QTLs detected in the present study are compared with other QTL analyses in wheat.  相似文献   

7.
Amylose content (AC), gel consistency (GC) and gelatinazation temperature (GT) are three important traits that influence the cooking and eating quality of rice. The objective of this study was to characterize the genetic components, including main-effect quantitative trait loci (QTLs), epistatic QTLs and QTL-by-environment interactions (QEs), that are involved in the control of these three traits. A population of doubled haploid (DH) lines derived from a cross between two indica varieties Zhenshan 97 and H94 was used, and data were collected from a field experiment conducted in two different environments. A genetic linkage map consisting of 218 simple sequence repeat (SSR) loci was constructed, and QTL analysis performed using qtlmapper 1.6 resolved the genetic components into main-effect QTLs, epistatic QTLs and QEs. The analysis detected a total of 12 main-effect QTLs for the three traits, with a QTL corresponding to the Wx locus showing a major effect on AC and GC, and a QTL corresponding to the Alk locus having a major effect on GT. Ten digenic interactions involving 19 loci were detected for the three traits, and six main-effect QTLs and two pairs of epistatic QTLs were involved in QEs. While the main-effect QTLs, especially the ones corresponding to known major loci, apparently played predominant roles in the genetic basis of the traits, under certain conditions epistatic effects and QEs also played important roles in controlling the traits. The implications of the findings for rice quality improvement are discussed.  相似文献   

8.
Vitreousness and kernel hardness are important properties for maize processing and end-product quality. In order to examine the genetic basis of these traits, a recombinant inbred line population resulting from a cross between a flint line (F-2) and a semident line (Io) was used to search for vitreousness and kernel composition QTLs. Vitreousness was measured by image processing from a kernel section, while NIR spectroscopy was used to estimate starch, protein, cellulose, lipid and semolina yield. In addition, thousand-grain weight and grain weight per ear were measured. The MQTL method was used to map the QTLs for the different traits. An additional program allowed for the detection of interaction QTLs between markers. The total number of main-effect and interaction QTLs was similar. The QTLs were not evenly distributed but tended to cluster. Such clusters, mixing main-effect and interaction QTLs, were observed at six positions : on chromosomes 1, 2, 3, 6, 8 and 9. Two of them, on chromosomes 6 and 9, concerned both QTLs for kernel-weight traits and QTLs for kernel-composition traits (protein and cellulose). Technological-trait QTLs (vitreousness or semolina yield) were located less than 16 cM from a protein-content QTL on chromosome 2, and were co-located with lipid- and starch-content QTLs on chromosome 8. The co-location of a vitreousness and a semolina-yield QTL at the telomeric end of the chromosome 2 (Bin 2.02) is likely to be meaningful since measurement of these related traits, made by completely different methods (NIRS vs image processing), yielded very close QTLs. A similar location was previously reported independently for a kernel-friability QTL. Comparing the map location of the numerous loci for known-function genes it was shown that three zein loci were closely linked to QTLs for vitreousness on chromosome 3, for semolina yield and starch on chromosome 4, and for protein, cellulose and grain weight on chromosome 9. Some other candidate genes linked to starch precursor metabolism were also suggested on chromosomes 6 and 8. Received: 27 April 2000 / Accepted: 3 July 2000  相似文献   

9.
Summary We report that plant height quantitative trait loci (QTLs) identified in a given small population are not consistent with QTLs identified in other small populations, and that most QTLs are in close proximity to mapped qualitative genetic loci. These observations provide evidence to support the hypothesis that qualitative genetic loci are the same loci that affect quantitative traits, and affirm that these modest experiments probably identify real QTLs.  相似文献   

10.
Main effects, epistatic effects and their environmental interactions of QTLs are all important genetic components of quantitative traits. In this study, we analyzed the main effects, epistatic effects of the QTLs, and QTL by environment interactions (QEs) underlying four yield traits, using a population of 240 recombinant inbred lines from a cross between two rice varieties tested in replicated field trials. A genetic linkage map with 220 DNA marker loci was constructed. A mixed linear model approach was used to detect QTLs with main effects, QTLs involved in digenic interactions and QEs. In total, 29 QTLs of main effects, and 35 digenic interactions involving 58 loci were detected for the four traits. Thirteen QTLs with main effects showed QEs; no QE was detected for the QTLs involved in epistatic interactions. The amount of variations explained by the QTLs of main effect were larger than the QTLs involved in epistatic interactions, which in turn were larger than QEs for all four traits. This study illustrates the ability of the analysis to assess the genetic components underlying the quantitative traits, and demonstrates the relative importance of the various components as the genetic basis of yield traits in this population.  相似文献   

11.
Common bean is an important vegetable legume in many regions of the world. Size and color of fresh pods are the key factors for deciding the commercial acceptance of bean as a fresh vegetable. The genetic basis of important horticultural traits of common bean is still poorly understood, which hinders DNA marker-assisted breeding in this crop. Here we report the identification of single-locus and epistatic quantitative trait loci (QTLs), as well as their environment interaction effects for six pod traits, namely width, thickness, length, size index, beak length and color, using an Andean intra-gene pool recombinant inbred line population from a cross between a cultivated common bean and an exotic nuña bean. The QTL analyses performed detected a total of 23 QTLs (single-locus QTLs and epistatic QTLs): five with only individual additive effects and six with only epistatic effects, while the remaining twelve showed both effects. These QTLs were distributed across linkage groups (LGs) 1, 2, 4, 6, 7, 8, 9, 10 and 11; particularly noteworthy are the QTLs for pod size co-located on LGs 1 and 4, indicative of tight linkage or genes with pleiotropic effects governing these traits. Overall, the results obtained showed that additive and epistatic effects are the major genetic basis of pod size and color traits. The mapping of QTLs including epistatic loci for the six pod traits evaluated provides support for implementing marker-assisted selection toward genetic improvement of common bean.  相似文献   

12.
Mapping quantitative trait loci (QTLs) is a foundation for molecular marker-assisted selection and map-based gene cloning. During the past decade, numerous QTLs for seed yield (SY) and yield-related traits in Brassica napus L. have been identified. However, integration of these results in order to compare QTLs from different mapping populations has not been undertaken, due to the lack of common molecular markers between studies. Using previously reported Brassica rapa and Brassica oleracea genome sequences, we carried out in silico integration of 1,960 QTLs associated with 13 SY and yield-related traits from 15 B. napus mapping experiments over the last decade. A total of 736 SY and yield-related QTLs were mapped onto 283 loci in the A and C genomes of B. napus. These QTLs were unevenly distributed across the 19 B. napus chromosomes, with the most on chromosome A3 and the least on chromosome C6. Our integrated QTL map identified 142 loci where the conserved QTLs were detected and 25 multifunctional loci, mostly for the traits of flowering time (FT), plant height, 1,000-seed weight, maturity time and SY. These conserved QTLs and multifunctional loci may result from pleiotropism or clustered genes. At the same time, a total of 146 genes underlying the QTLs for FT and other yield-related traits were identified by comparative mapping with the Arabidopsis genome. These results facilitate the retrieval of B. napus SY and yield-related QTLs for research communities, increase the density of targeted QTL-linked markers, validate the existence of QTLs across different populations, and advance the fine mapping of genes.  相似文献   

13.
The review presents a definition of loci controlling quantitative traits (quantitative trait loci, QTLs) and localization of all currently known QTLs responsible for milk production traits in dairy cattle. The QTL number and chromosome localization are verified, with special reference to chromosomes 1, 3, 6, 14, 20, and 23. In a number of cases, close location of QTLs for mastitis and for milk production traits was found. Some aspects of QTL pleiotropy and epistasis are discussed and mapping methods of major QTLs are listed. Original Russian Text Sc M.G. Smaragdov, 2006, published in Genetika, 2006, Vol. 42, No. 1, pp. 5–21.  相似文献   

14.
The evolution of morphological modularity through the sequestration of pleiotropy to sets of functionally and developmentally related traits requires genetic variation in the relationships between traits. Genetic variation in relationships between traits can result from differential epistasis, where epistatic relationships for pairs of loci are different for different traits. This study maps relationship quantitative trait loci (QTLs), specifically QTLs that affect the relationship between individual mandibular traits and mandible length, across the genome in an F2 intercross of the LG/J and SM/J inbred mouse strains (N = 1045). We discovered 23 relationship QTLs scattered throughout the genome. All mandibular traits were involved in one or more relationship QTL. When multiple traits were affected at a relationship QTL, the traits tended to come from a developmentally restricted region of the mandible, either the muscular processes or the alveolus. About one-third of the relationship QTLs correspond to previously located trait QTLs affecting the same traits. These results comprise examples of genetic variation necessary for an evolutionary response to selection on the range of pleiotropic effects.  相似文献   

15.
The genetic architecture determinants of yield traits in peanut (Arachis hypogaea L.) are poorly understood. In the present study, an effort was made to map quantitative trait loci (QTLs) for yield traits using recombinant inbred lines (RIL). A genetic linkage map was constructed containing 609 loci, covering a total of 1557.48 cM with an average distance of 2.56 cM between adjacent markers. The present map exhibited good collinearity with the physical map of diploid species of Arachis. Ninety-two repeatable QTLs were identified for 11 traits including height of main stem, total branching number, and nine pod- and seed-related traits. Of the 92 QTLs, 15 QTLs were expressed across three environments and 65 QTLs were newly identified. Twelve QTLs for the height of main stem and the pod- and seed-related traits explaining more than 10 % of phenotypic variation showed a great potential for marker-assisted selection in improving these traits. 相似文献   

16.
Most characters that distinguish one individual from another, like height or weight, vary continuously in populations. Continuous variation of these ‘quantitative’ traits is due to the simultaneous segregation of multiple quantitative trait loci (QTLs) as well as environmental influences. A major challenge in human medicine, animal and plant breeding and evolutionary genetics is to identify QTLs and determine their genetic properties. Studies of the classic quantitative traits, abdominal and sternopleural bristle numbers of Drosophila, have shown that: (1) many loci have small effects on bristle number, but a few have large effects and cause most of the genetic variation; (2) ‘candidate’ loci involved in bristle development often have large quantitative effects on bristle number; and (3) alleles at QTLs affecting bristle number have variable degrees of dominance, interact with each other, and affect other quantitative traits, including fitness. Lessons learned from this model system will be applicable to studies of the genetic basis of quantitative variation in other species.  相似文献   

17.
TESTING LIFE-HISTORY PLEIOTROPY IN CAENORHABDITIS ELEGANS   总被引:1,自引:0,他引:1  
Abstract Much life-history theory assumes that alleles segregating in natural populations pleiotropically affect life-history traits. This assumption, while plausible, has rarely been tested directly. Here we investigate the genetic relationship between two traits often suggested to be connected by pleiotropy: maternal body size and fertility. We carry out a quantitative trait locus (QTL) analysis on two isolates of the free-living nematode Caenorhabditis elegans , and identify two body size and three fertility QTLs. We find that one of the fertility QTLs colocalizes with the two body size QTLs on Chromosome IV. Further analysis, however, shows that these QTLs are genetically separable. Thus, none of the five body size or fertility QTLs identified here shows detectable pleiotropy for the assayed traits. The evolutionary origin of these QTLs, possible candidate loci, and the significance for life-history evolution are discussed.  相似文献   

18.
Root growth and thickening plays a key role in the final productivity and even the quality of storage roots in root crops. This study was conducted to identify and map quantitative trait loci (QTLs) affecting root morphological traits in Brassica rapa by using molecular markers. An F2 population was developed from a cross between Chinese cabbage (Brassica rapa ssp. chinensis) and turnip (B. rapa ssp. rapifera), which differed greatly in root characters. A genetic map covering 1837.1 cM, with 192 marker loci and 11 linkage groups, was constructed by using this F2 population. The F3 families derived from F2 plants were grown in the field and evaluated for taproot traits (thickness, length, and weight). QTL analysis via simple interval mapping detected 18 QTLs for the 3 root traits, including 7 QTLs for taproot thickness, 5 QTLs for taproot length, and 6 QTLs for taproot weight. Individually, the QTLs accounted for 8.4-27.4% of the phenotypic variation. The 2 major QTLs, qTRT4b for taproot thickness and qTRW4 for taproot weight, explained 27.4% and 24.8% of the total phenotypic variance, respectively. The QTLs for root traits, firstly detected in Brassica crops, may provide a basis for marker-assisted selection to improve productivity in root-crop breeding.  相似文献   

19.
V Segura  C Denancé  C-E Durel  E Costes 《Génome》2007,50(2):159-171
The present study aimed at investigating the genetic determinisms of architectural traits in a 1-year-old apple (Malus x domestica Borkh.). F1 progeny. A precise phenotyping including both tree topology and geometry was performed on 123 offspring. For a wide range of developmental traits, broad-sense heritability was estimated and quantitative trait loci (QTLs) were investigated. Several loci controlling geometry were identified (i) for integrated traits, such as tree surface and volume; (ii) for traits related to the form of long sylleptic axillary shoots (LSAS), such as bending and basis angle; and (iii) for traits of finer components, such as internode length of the trunk and LSAS. Considering topology, 4 QTLs were mapped for the total number of sylleptic branching in the tree, suggesting a strong and complex genetic control that was analysed through colocalisations between QTLs mapped for the different shoot types (long, medium, short). Two QTLs were also mapped for a phenological trait (date of bud break). When several QTLs were detected for a trait, a linear model was built to test epistatic effects and estimate the whole percentage of variability explained. The discussion focuses on particular colocalisations and on the relevance of traits to further tree development.  相似文献   

20.
QTL analysis of leaf morphology in tetraploid Gossypium (cotton)   总被引:13,自引:0,他引:13  
Molecular markers were used to map and characterize quantitative trait loci (QTLs) determining cotton leaf morphology and other traits, in 180 F2 plants from an interspecific cross between a Gossypium hirsutum genotype carrying four morphological mutants, and a wild-type Gossypium barbadense. The prominent effects of a single region of chromosome 15, presumably the classical ”Okra-leaf” locus, were modified by QTLs on several other chromosomes affecting leaf size and shape. For most traits, each parent contained some alleles with positive effects and others with negative effects, suggesting a large potential for adapting leaf size and shape to the needs of particular production regimes. Twenty one QTLs/loci were found for the morphological traits at LOD≥3.0 and P≤0.001, among which 14 (63.6%) mapped to D-subgenome chromosomes. Forty one more possible QTLs/loci were suggested with 2.0≤LOD<3.0 and 0.001<P≤0.01. Among all of the 62 possible QTLs (found at LOD≥2.0 and P≤0.01) for the 14 morphological traits in this study, 38 (61.3%) mapped to D-subgenome chromosomes. This reinforces the findings of several other studies in suggesting that the D-subgenome of tetraploid cotton has been subject to a relatively greater rate of evolution than the A-subgenome, subsequent to polyploid formation. Received: 26 April 1999 / Accepted: 30 July 1999  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号