Preparation and spectroscopic properties of cobalt(III), nickel(II), copper(II) and zinc(II) complexes with a novel saturated macrocyclic ligand: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22-docosahydrodibenzo-[b,i][1,4,8,11]tetraazacyclotetradecine

1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19, 20,21,22-Docosahydrodibenzo[b,i] [1,4,8,11] tetraazacyclotetradecine was prepared by hydrogenation of the benzo-analogue. Five isomers are feasible as a result of this hydrogenation but only two have been isolated: isomer A (melting point 158.5– 161.0 °C) and isomer B (melting point 194.5– 196.0 °C). The ¹³C NMR study was initiated to clear up the conformational differences between isomers. The cobalt(III), nickel(II), copper(II) and zinc(II) complexes of isomers A and B were prepared and investigated by near-ultraviolet, visible, infrared, NMR and ESR measurements. The ligand-field band in the 15 000-30 000 cm⁻¹ region for the cobalt(III), nickel(II) and copper(II) complexes provided information on their geometry around the central metal atom. That is to say, the cobalt(III) complexes are subjected to the octahedral ligand-field with axial elongation. The copper(II) complexes and the nickel- (II) complex of isomer A are subjected to the square- planar ligand-field in these complexes. The ligand- field bands for the nickel(II)complex of isomer B display the square-planar-distorted octahedral equilibrium in the coordinating solvent. ESR measurements for the copper(II) complexes also presented the spin Hamiltonian parameters in accord with the square- planar coordination. A strong band appearing at ca. 3200 cm⁻¹ was assigned to the N-H stretching mode and this band was slightly shifted to lower frequency upon metal coordination. The vibrational spectra and the conductance data provided evidences for the formation of the complexes with perchlorate ion as the counter ion. ¹³C NMR suggest that the complexes of isomer A are the cis-syn-cis form and the complexes of isomer B are the cis-anti-cis form.     

Synthesis, structural and electrochemical features of alicyclic and aromatic α,α′-N2- and-S2-dioximate macrobicyclic cobalt(II,III) and ruthenium(II) tris-complexes

The triribbed-functionalized cobalt(II,III) and ruthenium(II) clathrochelate derivatives of the vic-dioximes with two nitrogen or sulfur atoms in α-positions to π-conjugated diazomethine chelate fragments of a macrobicyclic framework were obtained in moderate yields under mild and high dilution conditions by nucleophilic substitution of six reactive chlorine atoms of the boron-capped macrobicyclic cobalt and ruthenium(II) precursors with N₂- and S₂-dinucleophiles (ethylenediamine and the corresponding α-dithiols in the presence of triethylamine, respectively). The complexes obtained were characterized using elemental analysis, MALDI-TOF mass spectrometry, IR, UV-Vis, ¹H and ¹³C{¹H} NMR and EPR spectroscopies, magnetochemistry and X-ray crystallography. The MN₆-coordination polyhedra of all the X-ray studied clathrochelates possess a slightly distorted trigonal prismatic geometry. The encapsulated cobalt(II) ions are shifted from the centers of the cavities formed by the macrobicyclic ligand due to the Jahn-Teller distortion, while the ruthenium and iron(II) ions in their clathrochelate analogs do occupy these centers. The main geometrical parameters of the macrobicyclic frameworks vary with Shannon radius of an encapsulated metal ion. In the case of the tris-ethylenediamine cobalt(III) clathrochelate, the field strength of the macrobicyclic amine ligand is essentially lower than those for their aromatic and aliphatic analogs because of the negative σ_para-effect of the ribbed alkylamine substituents. The magnetometry and EPR data confirmed the low-spin character of the cobalt(II) complexes synthesized. The electrochemically generated oxidized cobalt clathrochelates are stable in the CVA time scale, whereas their ruthenium- and iron-containing analogs as well as the reduced forms of all the cobalt, ruthenium and iron complexes obtained are unstable.     

Geometrical and optical isomers of diethylenetriaminemonoacetato(ethylene-diamine)cobalt(III) ion and their isomerism

Two isomers of the complex ion in the title were obtained and each isomer was resolved chromatographically into its antipodes. The two isomers with their isomer proportion of 27.9 and 72.1% in the equilibrium mixture were assigned to α and β(mer-N) isomers, respectively, of three possible geometrical isomers, from the measurements of their absorption, circular dichroism, and NMR spectra.Preference of the β(mer-N) to the isomer and very poor yield of an expected β(fac-N) isomer were confirmed by conformational analyses carried out for each structure of the isomers of Λ configuration, with possible configurations around nitrogen atoms and conformations of chelate rings. They gave minimized total strain energies of 43.13, 44.24, and 52.63 kJ/mol for the Λ-R,R(en:λ) structure of a β(mer-N) isomer, the Λ-S,R(δ,δ) structure of an α isomer, and a Λ-R,S(λ,λ) structure of a β(fac-N) isomer, respectively.From the results, configurations and conformations of the enantiomers of the resolved β(mer-N) and its isomers were deduced. An unfound isomer, β(fac-N) isomer, is thought to be very unstable; it would exist as less than 2% of the amount of β(mer- N) isomer, even if it were present in the reaction mixture.     

Resonance Raman and crystallographic studies on the complex [Fe2(bbpnol)2]·2DMF (bbpnol=N,N′-bis(2-hydroxybenzyl)-2-ol-1,3-propanediamine)

The ligand N,N′-bis(2-hydroxybenzyl)-2-ol-1,3-propanediamine (H₃bbpnol) reacts with iron(III) perchlorate forming two dinuclear bis-μ-alkoxo complexes, a ‘cis-trans’ isomer (complex 1) previously reported and a ‘cis-cis’ isomer (complex 2) characterized in this work. The main differences found in complex 2 structure are, (a) the four phenolic oxygens are trans to the alkoxo bridges; (b) each ligand is shared by the two Fe(III) ions occupying two coordination positions at each center. The Fe(III) centers in the resulting centrosymmetric structure in complex 2 have a distorted-octahedral geometry with the equatorial plane occupied by the phenolic and alcoholic oxygen atoms and the apical positions are filled by the aminic nitrogen atoms. The resonance Raman (RR) spectra of these two isomeric complexes are somewhat different with the intensity of some low-frequency modes increasing in the less symmetric core. The electronic spectra of both complexes are similar, but the molar absorptivities are substantially increased in complex 2, indicating the presence of an electronic coupling between the phenolate moieties trans in relation to the alkoxo bridge, and that phenolates coordinated cis to the alkoxo bridge do not seem to contribute to LMCT oscillator strength. This is directly reflected in the Raman excitation profiles (REP) of the chromophore modes, with the vibrational modes of the ‘cis-cis’ isomer showing a greater intensification compared with the ‘cis-trans’ isomer.     

X-ray and NMR study of the fate of the Co(1,10-phenanthroline-5,6-diketone)3 ion in aqueous solution: supramolecular motifs in the packing of 1,10-phenanthroline-5,6-diketone and 1,10-phenanthroline-5,6-diol complexes

X-ray structures are presented of three new cobalt complexes prepared from Co(III) and N,N^′-1,10-phenanthroline-5,6-dione. The cis-aqua-chloro-bis(N,N^′-1,10-phenanthroline-5,6-dione)cobalt(II) nitrate trihydrate (3) and the cis-aqua-bromo-bis(N,N^′-1,10-phenanthroline-5,6-dione)cobalt(II) trifluoro-methanesulfonate tetrahydrate (4), crystalize in the same space group with a similar arrangement of the complex ions. However, on the molecular scale there are important differences. The cobalt complex in 3 has a typical high-spin geometry whereas in 4 the cobalt complex displays a Jahn-Teller distortion characteristic for low-spin compounds. The third structure is di(N,N^′-1,10-phenanthroline-5,6-diol)(N,N^′-1,10-phenanthroline-5,6-dione)cobalt(III) bromide hexahydrate (5). NMR studies of the hydration of the Co(III)(1,10-phenanthroline-5,6-dione)₃ ³⁺ ion in water and DMSO are also presented. The various possible transformations of the N,N^′-1,10-phenanthroline-5,6-dione ligand are discussed.     

Synthesis of 2-(nitromethyl)ornithine from ornithine mediated by cobalt(III)

Rac.-p-(tris(2-aminoethyl)amine-2-(nitromethyl)ornithine)cobalt(III) trichloride (2d) was obtained by a simple three-step procedure from ornithine using cobalt template chemistry. p-(Tris(2-aminoethyl)amine-ornithine)cobalt(III) trichloride (2a) was obtained from tris(2-aminoethyl)amine (tren) and (S)-ornithine in the presence of cobalt(II), which was oxidised to cobalt(III) during the reaction. Complex 2a was selectively oxidised with thionyl chloride-dimethyl formamide to p-(tris(2-aminoethyl)amine-dehydro-ornithine)cobalt(III) trichloride 2b. Complex 2c, in which reaction of thionyl chloride-dimethyl formamide has also occurred at the δ-amine of ornithine, was obtained at longer reaction times. Complex 2b reacted with nitromethane anion to give rac.-p-(tris(2-aminoethyl)amino-2-(nitromethyl)ornithine)cobalt(III) trichloride (2d). The amino acid rac.-2-(nitromethyl)ornithine (1b) was released by reducing complex 2d with aqueous ammonium sulfide. Complex 2d was expected to release 2-(nitromethyl)ornithine (1b) in hypoxic cells, where the amino acid could act as an inhibitor of ornithine decarboxylase. Preliminary data indicated that complex 2d was weakly cytotoxic in one cell type studied.     

Cobalt and iron complexes of chiral C1- and C2-terpyridines: Synthesis, characterization and use in catalytic asymmetric cyclopropanation of styrenes

Optically pure C₁- and C₂-terpyridine ligands (L) form cobalt(II) and iron(II) complexes of formula [Co(L)Cl₂] and [Fe(L)Cl₂], respectively, and Iron(III) complexes of formulas [Fe(L)Cl₃]. Structures of three new chiral cobalt(II) and one iron(III) complexes were analysed using X-ray crystal structure analysis. These complexes were shown to be precursor of efficient catalyst for cyclopropanation. Reaction with AgOTf converted the complex to active catalyst, which gave enantioselectivities of up to 76% ee for the trans-isomers and 83% ee for the cis-isomers of styrene cyclopropanes with ethyl diazoacetate. Hammett studies showed the active species for both cobalt and iron complexes to have a non-linear relationship to σ_p constant.     

New chelating ligands for Co(III)-based peptide-cleaving catalysts selective for pathogenic proteins of amyloidoses

The Co(III) complex of 1,4,7,10-tetraazacyclododecane has been employed as the catalytic center of target-selective peptide-cleaving catalysts in previous studies. As new chelating ligands for the Co(III) ion in the peptide-cleaving catalysts, 1-oxo-4,7,10-triazacyclodedecane, 1-aryl-1,4,7,10-tetraazacyclodecane, and 7-aryl-1-oxo-4,7,10-triazacyclodecane were examined in the present study. A chemical library comprising 612 derivatives of the Co(III) complex of the new chelating ligands was constructed. The catalyst candidates were tested for their activity to cleave the soluble oligomers of amyloidogenic peptides amyloid β-42 and human islet amyloid polypeptide (h-IAPP), which are believed to be the pathogenic species for Alzheimer’s disease and type 2 diabetes mellitus, respectively. One derivative of the Co(III) complex of 1-aryl-1,4,7,10-tetraazacyclodecane was found to cleave the oligomers of h-IAPP. Cleavage products were identified and cleavage yields were measured at various catalyst concentrations for the action of the new catalyst. The present results reveal that effective catalytic drugs for amyloidoses may be obtained by using Co(III) complexes of various chelating ligands.     

Cyclic fatty esters: Stereochemistry of monounsaturated products from the hydrogenation and reduction of 9-(6-propyl-3-cyclohenxenyl)-8-nonenoic acid or its ester

Diunsaturated, C-18 cyclic fatty acid methyl esters (CFAME) were previously synthesized as model derivatives for characterization and biological evaluation of cyclic fatty acids (CFA) formed in heat-abused vegetable oils. The propyl substituted, diunsaturated CFMAE (I) was selectively reduced to prepare two monounsaturated, positional isomers with the double bond located either in the ester substituent (alkene isomer II) or in the ring (cyclohexene isomer III). The stereochemistry of these monounsaturated products was investigated by capillary GLC and NMR. Capillary GLC showed that each positional isomer was a mixture of two ‘ring’ isomers (i.e. a mixture of two isomers with side chains either cis or trans). The ring double bond in diene I was readily hydrogenated with various metal catalysts, and no cyclohexene isomer III was detected in the product. Platinum oxide poisoned with Ph₃P was the most selective catalyst examined to convert diene I to monoene II. Diimide reduction was the only method foud to reduce selectively the double bond in the ester side chain of diene I. This diimide reduction was facilitated when the Z-double bond in the side chain was isomerized to E-double bond with p-toluenesulfinic acid. Cyclohexene isomer III and alkene isomer II were separated by argentation HPLC. These two isomeric monoenes were characterized by GC-MS, capillary GLC, micro-ozonolysis, IR and NMR. Catalytic hydrogenation with Ph₃P-poisoned PtO₂ and diimide reduction of the diunsaturated cyclic ester may provide useful methods to synthesize and label monounsaturated cyclic fatty esters.     

Formation of stable and metastable porphyrin- and corrole-iron(IV) complexes and isomerizations to iron(III) macrocycle radical cations

Oxidations of three porphyrin-iron(III) complexes (1) with ferric perchlorate, Fe(ClO₄)₃, in acetonitrile solutions at −40 °C gave metastable porphyrin-iron(IV) diperchlorate complexes (2) that isomerized to known iron(III) diperchlorate porphyrin radical cations (3) when the solutions were warmed to room temperature. The 5,10,15,20-tetraphenylporphyrin (TPP), 5,10,15,20-tetramesitylporphyrin (TMP), and 2,3,7,8,12,13,17,18-octaethylporphyrin (OEP) systems were studied by UV-visible spectroscopy. Low temperature NMR spectroscopy and effective magnetic moment measurements were possible with the TPP and TMP iron(IV) complexes. Reactions of two corrole systems, 5,10,15-tris(pentafluorophenyl)corrole (TPFC) and 5,15-bis(pentafluorophenyl)-10-p-methoxyphenylcorrole (BPFMC), also were studied. The corrole-iron(IV) chlorides reacted with silver salts to give corrole-iron(IV) complexes. The corrole-iron(IV) nitrate complexes were stable at room temperature. (TPFC)-iron(IV) toslyate, (TPFC)-iron(IV) chlorate, and (BPFMC)-iron(IV) chlorate were metastable and rearranged to their electronic isomers iron(III) corrole radical cations at room temperature. (TPFC)-iron(III) perchlorate corrole radical cation was the only product observed from reaction of the corrole-iron(IV) chloride with silver perchlorate. For the metastable iron(IV) species, the rates of isomerizations to the iron(III) macrocycle radical cation electronic isomers in dilute acetonitrile solutions were relatively insensitive to electron demands of the macrocyclic ligand but reflected the binding strength of the ligand to iron. Kinetic studies at varying temperatures and concentrations indicated that the mechanisms of the isomerization reactions are complex, involving mixed order reactivity.     

Reactivity of a cobalt(III)-peroxo complex in oxidative nucleophilic reactions

A mononuclear cobalt(III)-peroxo complex bearing a macrocyclic tetradentate N₄ ligand, [Co^III(TMC)(O₂)]⁺ (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane), was generated in the reaction of [Co^II(TMC)]²⁺ and H₂O₂ in the presence of triethylamine in CH₃CN. The reactivity of the cobalt(III)-peroxo complex was investigated in aldehyde deformylation with various aldehydes and compared with that of iron(III)- and manganese(III)-peroxo complexes, such as [Fe^III(TMC)(O₂)]⁺ and [Mn^III(TMC)(O₂)]⁺. In this reactivity comparison, the reactivities of metal-peroxo species were found to be in the order of [Mn^III(TMC)(O₂)]⁺ > [Co^III(TMC)(O₂)]⁺ > [Fe^III(TMC)(O₂)]⁺. A positive Hammett ρ value of 1.8, obtained in the reactions of [Co^III(TMC)(O₂)]⁺ and para-substituted benzaldehydes, demonstrates that the aldehyde deformylation by the cobalt(III)-peroxo species occurs via a nucleophilic reaction.     

Stereoselective reduction of cobalt(III) complexes by bacteria

A strain of Enterobacter cloacae, isolated from soil, reduces racemic abdtriglycinatocobalt(III), triglycinatocobalt(III), stereoselectively under anaerobic conditions. Washed suspensions of cells, grown anaerobically in the absence of triglycinatocobalt(III) initially reduce the L-enantiomer stereospecifically under argon yielding a labile Co(II) chelate. An approximately 5-fold increase in the rate of reduction of the complex occurs using cells disrupted by 2-phenylethanol; decomposition now proceeds with a slight preference for the D-enantiomer. Reduction of triglycinatocobalt(III) under argon by cell-free extracts, prepared by sonication, exhibits similar stereoselectivities to cells disrupted by 2-phenylethanol. However, extracts contain a factor capable of reducing D-triglycinatocobalt(III) with high stereoselectivity under molecular hydrogen. The behaviour of Enterobacter cloacae is compared with that of Aerobacter aerogenes, Proteus vulgaris, Escherichia anaerogenes and Serratia marcescens. Stereoselective effects are also observed in the bacterial reduction of other cobalt(III) complexes.     

Solution equilibria of Alizarin Red S with Al(III) and Ni(II)

The solution equilibria of Alizarin Red S (NaH₂- ARS, or 9,10-dihydro-3,4-dihydroxy-9,10-dioxo-2- anthracene sulphonic acid monosodium salt) with Al(III) and Ni(II) were investigated. A general procedure for speciation and the determination of equilibria was developed from work by Coleman. and Gampp. The results of the analyses gave a K_H2 for NaH₂ARS of 10^5.71. For the AI(III)/Na₂- HARS equilibrium it was determined that a 1:2 complex was formed in solution with β₂ = 10^12.88. For the Ni(II)/NaH₂ARS equilibrium two species exist, a 1:1 and a 1:2 complex with β₁ = 10^5.35 and β₂ = 10^11.53.     

Stereoisomers of Mn(III) complexes of ethylenebis[(o-hydroxyphenyl)glycine]

We have prepared the Mn(III) complexes rac-Na[Mn(EHPG)]·3H₂O (1) and rac,meso-Na[Mn(EHPG)]·H₂O (2), where H₄EHPG is ethylenebis[(o-hydroxyphenyl)glycine], and determined their X-ray crystal structures. Complex 1 contains N(S,S)C(R,R) configurations at the N and C stereogenic centres, whilst in the unit cell of complex 2 there are two independent molecules, 2a (meso) and 2b (rac), with N(R,R)C(S,R) and N(R,R)C(S,S) configurations, respectively. Enantiomers of each complex are also present. The Mn(III) centres have Jahn-Teller-distorted octahedral geometry. The rac isomer has two long axial MnO(carboxylate) bonds (2.162-2.202 Å) and the equatorial plane contains two short MnN bonds (2.012-2.063 Å) trans to short MnO(phenolate) bonds (1.865-1.901 Å). The meso isomer has long axial MnN (2.194 Å) and MnO(carboxylate) (2.152 Å) bonds, and shorter equatorial MnN (2.005 Å) trans to MnO(phenolate) (1.901 Å) and MnO(carboxylate) (1.988 Å) trans to O(phenolate) (1.897 Å) bonds.     

Synthesis, structure and DNA binding studies of a mononuclear cobalt(III) complex with a NNO donor Schiff base derived from 4-methyl-2,6-dibenzoylphenol and ethane-1,2-diamine

The mononuclear cationic cobalt(III) complex 1 [Co(L)₂]⁺ [where HL is H₂N(CH₂)₂NC(Ph)C₆H₂(Me)(OH)COPh] has been obtained by the condensation of 4-methyl-2,6-dibenzoylphenol and ethane-1,2-diamine in the presence of CoCl₂ · 6H₂O and isolated as the chloride solvate {1 · Cl · 2H₂O · EtOH}. The water and ethanol do not form part of the cobalt(III) pseudo-octahedral [Co(L)₂]⁺ coordination sphere, which is cis-CoN₄O₂ with the NNO-ligands mer. Compound 1 has been characterised by mass spectrometry, IR, electronic, ¹H and ¹³C NMR spectroscopy, conductivity measurements, elemental analysis, TGA, cyclic voltammetry and an X-ray structural determination. The average Co-N and Co-O distances are, respectively, 1.929(4) and 1.882(3) Å. The N?N intraligand bite distance is 2.73(4) Å and the N-Co-N and O-Co-O angles are, respectively, 86.2(15)° and 93.3(13)°. Cyclic voltammetric studies of complex 1 indicate an irreversible cathodic peak (E_pc, ca. −0.61 V) corresponding to the reduction of cobalt(III) to cobalt(II). Absorption titration experiments gave a binding constant for DNA interaction of 1.4 × 10⁴ M⁻¹ and a binding site size 0.16 base pairs.     

Catalytic oxidation of alkenes by manganese(III) porphyrin-encapsulated Al, V, Si-mesoporous molecular sieves

Cationic manganese-porphyrin, [meso-tetrakis(4-trimethylammoniophenyl)porphyrinato]manganese(III) pentachloride (MnTAPP), has been prepared and encapsulated into mesoporous molecular sieves Al-MCM-41 and V-MCM-41, containing different amounts of Al and V, respectively. The catalytic activities of these heterogeneous materials were tested in the liquid phase oxidation of cyclohexene and styrene in acetonitrile with iodosylbenzene (PhIO) as oxygen source. Both types of catalysts were active in the oxidation reaction. MnTAPP encapsulated in Al-MCM-41 produces allylic oxidation products alone and no epoxide with styrene was found. However, it produces both epoxide and allylic oxidation products with cyclohexene. At the same time, MnTAPP encapsulated in V-MCM-41 produces epoxide as major product and little allylic oxidation product with styrene, while both epoxide and allylic oxidation products were obtained with cyclohexene. It is suggested that the regioselective effect is due to relatively more acidic Al-MCM-41 than V-MCM-41 which could make the CC bond unreactive towards epoxidation and produces allylic oxidation product. With increasing Al or V content in the support, the porphyrin loading was found to increase, which in turn increases the catalytic activity of the heterogeneous systems. The heterogeneous catalysts were reused for three times. The selectivity of these heterogeneous catalysts does not change appreciably even after three times of reusing, but their catalytic activity decreases marginally. This may be attributed to catalyst leaching and/or decomposition of MnTAPP complex under the reaction conditions.     

Sulfated N-(carboxymethyl)chitosans: Novel blood anticoagulants

N-(Carboxymethyl)chitosan was subjected to sulfation in a mixture of concentrated sulfuric acid (oleum) and N,N-dimethylformamide, under anhydrous conditions. The resulting product contained 11% of sulfur and degree of substitution: N-acetyl, 42%; N-carboxymethyl, 58%; and sulfate, 100%. Sonication of the sulfated N-(carboxymethyl)chitosan gave two main fractions whose molecular weights were 39,000 and 80,000. In human blood, complexes of sulfated N-(carboxymethyl) chitosan and antithrombin inhibited both thrombin and factor Xa, and produced neither hemolysis nor alterations in erythrocytes and lymphocytes. Sulfated N-(carboxymethyl)chitosan is therefore proposed as a blood anticoagulant.     

Synthesis, characterization, cytotoxic activity and DNA binding properties of the novel dinuclear cobalt(III) complex with the condensation product of 2-acetylpyridine and malonic acid dihydrazide

A novel dinuclear cobalt(III) complex with the condensation product of 2-acetylpyridine and malonic acid dihydrazide, N′,N′²-bis[(1E)-1-(2-pyridyl)ethylidene]propanedihydrazide was synthesized and characterized by elemental analysis, spectroscopy (NMR and infrared), and X-ray crystal analysis. The complex showed a moderate activity towards Artemia salina. The highest cytotoxic potential of the complex was observed on the epithelial breast cancer (MDA-361) cell line. The investigated complex induced apoptosis, the early apoptotic cells comprising 28.18%, compared to 5.64% of control cells in the same phase. The interaction of the complex with calf thymus DNA (CT-DNA) was monitored by blue shift and hyperchromism in the UV-vis spectra. The observed intrinsic binding constant (K_b = 4.2 × 10⁵ M^− 1) together with structural analysis of the complex indicate the groove binding.     

Novel bis(diethylenetriamine)thallium(III) complex. Synthesis and characterization in pyridine solution and in solid

A new complex of thallium(III) with the nitrogen donor ligand diethylenetriamine (dien) has been prepared and characterized by multinuclear NMR (¹H, ¹³C, ²⁰⁵Tl), infrared and Raman spectroscopy, and X-ray diffraction. In solution, the symmetric s-facial isomer of [Tl(dien)₂]³⁺ is formed. This is a fluxional molecule even at low temperature (235 K); therefore, the different rotamers cannot be observed separately. A complete characterization of the complex is given from its non-trivial NMR spectra. The crystal structure of [Tl(dien)₂](ClO₄)₃·H₂O shows u-facial geometry, where the coordination environment around thallium can be described as a distorted trigonal prism.     

Solution properties of the nickel(II,III) and copper(II,III) complexes of trans-dioxocyclam (trans-dioxocyclam=5,12-dioxo-1,4,8,11-tetraazacyclotetradecane) and the X-ray crystal structure of the N-rac-isomer of the nickel(II) complex

The crystal and molecular structures of the N-rac-isomer of the nickel(II) complex of 14-membered amide-containing macrocycle [NiL¹] · 4H₂O (H₂L¹=5,12-dioxo-1,4,8,11-tetraazacyclotetradecane) have been determined. Two deprotonated amide and two amine donors co-ordinate to the nickel(II) in nearly square planar manner with Ni-N_amine bonds longer than Ni-N_amide ones (1.930 vs. 1.898 Å). Water molecules do not co-ordinate and form hydrogen bond bridges between macrocyclic units in the crystal lattice. The analysis of ¹H NMR data confirmed that the solid-state conformation of the macrocycle in N-rac[NiL¹] is retained in aqueous solution though equilibrated with some amount of N-meso isomer. The comparison of the spectroscopic characteristics of the M(II) and M(III) complexes and the redox potentials of M(III/II) couples (M=Ni and Cu) for ML¹ with those for ML²(H₂L²=5,7-dioxo-1,4,8,11-tetraazacyclotetradecane) revealed a rather small influence of the trans- vs. cis-arrangement of amide donors in co-ordination spheres of the metal ions.