A New Cold-Adapted,Organic Solvent Stable Lipase from Mesophilic Staphylococcus epidermidis AT2

The gene encoding a cold-adapted, organic solvent stable lipase from a local soil-isolate, mesophilic Staphylococcus epidermidis AT2 was expressed in a prokaryotic system. A two-step purification of AT2 lipase was achieved using butyl sepharose and DEAE sepharose column chromatography. The final recovery and purification fold were 47.09 % and 3.45, respectively. The molecular mass of the purified lipase was estimated to be 43 kDa. AT2 lipase was found to be optimally active at pH 8 and stable at pH 6–9. Interestingly, this enzyme demonstrated remarkable stability at cold temperature (<30 °C) and exhibited optimal activity at a temperature of 25 °C. A significant enhancement of the lipolytic activity was observed in the presence of Ca²⁺, Tween 60 and Tween 80. Phenylmethylsulfonylfluoride, a well known serine inhibitor did not cause complete inhibition of the enzymatic activity. AT2 lipase exhibited excellent preferences towards long chain triglycerides and natural oils. The lipolytic activity was stimulated by dimethylsulfoxide and diethyl ether, while more than 50 % of its activity was retained in methanol, ethanol, acetone, toluene, and n-hexane. Taken together, AT2 lipase revealed highly attractive biochemical properties especially because of its stability at low temperature and in organic solvents.     

Screening and identification of a novel organic solvent-stable lipase producer

A strain named DS9 excreting organic solvent-stable lipase was screened and later identified asBacillus subtilis based on its phenotypes, biochemical test, and 16S rRNA gene sequence. Strain DS9 grows well on the medium with 10% (v/v) organic solvent with log P values equal to or above 2.5. The organic solvent-tolerant lipase excreted by strain DS9 had a wider tolerance for organic solvents. The relative activity of the lipase was above 60% at 37 °C, 200 rpm, 30 min in the present of 25% (v/v) organic solvents such as 1-butanol, hexanol, benzene, and toluene. The lipase was not only stable but also activated by n-hexane, xylene, heptane, isooctane, and n-decane. The optimal pH and temperature were 8.0 and 40 °C, respectively. Both the organic solvent-tolerant microorganism and the organic solvent-stable lipase produced by this strain could be used as a biocatalyst for application in non-aqueous biocatalysis.     

Isolation and characterization of a novel organic solvent-tolerant Anoxybacillus sp. PGDY12, a thermophilic Gram-positive bacterium

Aims: To isolate and characterize new bacteria capable of tolerating high concentrations of organic solvents at high temperature. Methods and Results: A solvent‐tolerant, thermophilic bacterium was isolated from hot spring samples at 55°C. The strain PGDY12 was characterized as a Gram‐positive bacterium. It was able to tolerate 100% solvents, such as toluene, benzene and p‐xylene on plate overlay and high concentrations of these solvents in liquid cultures. A comparison of growth showed that 0·2% (v/v) benzene and 0·15% (v/v) p‐xylene were capable of enhancing the final cell yields. Transmission electron micrographs showed the incrassation of electron‐transparent intracellular material and the distorted cytoplasm in case of the cells grown in toluene. A phylogenetic analysis based on 16S rRNA sequence data indicated that the strain PGDY12 was member of the genus Anoxybacillus. Conclusions: The thermophilic, Gram‐positive Anoxybacillus sp. PGDY12 exhibited a unique and remarkable ability to tolerate solvents at 55°C. Significance and Impact of the Study: The solvent tolerance properties are less known in thermophilic bacteria. The Anoxybacillus sp. PGDY12 is the first strictly thermophilic bacterium able to tolerate a broad range of solvents. This strain is a promising candidate for use as a high temperature biocatalyst in the biotechnological applications.     

Purification and biochemical characterization of an organic solvent-tolerant and detergent-stable lipase from Staphylococcus capitis

A mesophilic bacterial culture, producing an extracellular alkaline lipase, was isolated from the gas-washing wastewaters generated from the Sfax phosphate plant of the Tunisian Chemical Group and identified as Staphylococcus capitis strain. The lipase, named S. capitis lipase (SCL), has been purified to homogeneity from the culture medium. The purified enzyme molecular weight was around 45 kDa. Specific activities about 3,900 and 500 U/mg were measured using tributyrin and olive oil emulsion as substrates, respectively at 37°C and pH 8.5. Interestingly, the SCL maintained more than 60% of its initial activity over a wide pH values ranging from 5 to 11 with a high stability between pH 9 and 11 after 1 hr of incubation at room temperature. The lipase activity was enhanced in the presence of 2 mM of Mg²⁺, Ca²⁺, and K⁺. SCL showed significant stability in the presence of detergents and organic solvents. Altogether, these features make the SCL useful for industrial applications. Besides, SCL was compatible with commercially available detergents, and its incorporation increases lipid degradation performances making it a potential candidate in detergent formulation.     

A unique thermostable and organic solvent tolerant lipase from newly isolated <Emphasis Type="Italic">Aneurinibacillus thermoaerophilus</Emphasis> strain HZ: physical factor studies

A newly isolated thermophilic bacterium, Aneurinibacillus thermoaerophilus strain HZ, from a hot spring recreational area (Sungai Kelah, Malaysia), showed an extracellular lipase activity. It was identified based on 16S rRNA sequencing, where phylogenetic analysis revealed its homology to Aneurinibacillus thermoaerophilus. The strain produced a lipase that was stable in various organic solvents such as dimethyl sulfoxide, toluene, p-xylene, and hexane. In order to increase lipase production, optimization of physical factors which affected the growth and lipase production was studied. The optimal growth was obtained at 50°C and pH 8.0; while the maximal lipase production was achieved in the logarithmic decline phase at 60°C and pH 7.5 with 7% starting inoculum and 150 rev/min shaking rate for 48 h incubation.     

Chemical Inactivation of Lipase in Organic Solvent: A Lipase from Pseudomonas aeruginosa TE3285 is More Like a Typical Serine Enzyme in an Organic Solvent than in Aqueous Media

A microbial lipase from Pseudomonas aeruginosa TE3285 was treated in anhydrous diisopropyl ether with three kinds of serine-reactive reagents, ethyl p-nitrophenyl methylphosphonate (ENMP), diisopropyl fluorophosphate (DFP), and phenylmethylsulfonyl fluoride (PMSF) to lose its catalytic activity for both transesterification in an organic solvent and ester hydrolysis in aqueous system. In contrast with the facile inactivation in an organic solvent, no or very slow inactivation was observed in an aqueous solution. The lipase was shown to behave more like a typical serine enzyme in an organic solvent than in aqueous solution with regard to the chemical inactivation by serine-reactive reagents. The unique behavior of the lipase in an organic solvent may be associated with inferfacial activation of the lipase, which is one of the most distinct characteristics of the lipase family, and the activiation of lipase could be induced by a hydrophobic interaction with an organic solvent.     

Isolation and expansion of the catabolic potential of a Pseudomonas putida strain able to grow in the presence of high concentrations of aromatic hydrocarbons.

Pseudomonas putida DOT-T1 was isolated after enrichment on minimal medium with 1% (vol/vol) toluene as the sole C source. The strain was able to grow in the presence of 90% (vol/vol) toluene and was tolerant to organic solvents whose log P(ow) (octanol/water partition coefficient) was higher than 2.3. Solvent tolerance was inducible, as bacteria grown in the absence of toluene required an adaptation period before growth restarted. Mg2+ ions in the culture medium improved solvent tolerance. Electron micrographs showed that cells growing on high concentrations of toluene exhibited a wider periplasmic space than cells growing in the absence of toluene and preserved the outer membrane integrity. Polarographic studies and the accumulation of pathway intermediates showed that the strain used the toluene-4-monooxygenase pathway to catabolyze toluene. Although the strain also thrived in high concentrations of m- and p-xylene, these hydrocarbons could not be used as the sole C source for growth. The catabolic potential of the isolate was expanded to include m- and p-xylene and related hydrocarbons by transfer of the TOL plasmid pWW0-Km.     

A new organic solvent tolerant protease from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> 115b

Five out of the nine benzene–toulene–ethylbenzene-xylene (BTEX) tolerant bacteria that demonstrated high protease activity on skim milk agar were isolated. Among them, isolate 115b identified as Bacillus pumilus exhibited the highest protease production. The protease produced was stable in 25% (v/v) benzene and toluene and it was activated 1.7 and 2.5- fold by n-dodecane and n-tetradecane, respectively. The gene encoding the organic solvent tolerant protease was cloned and its nucleotide sequence determined. Sequence analysis revealed an open reading frame (ORF) of 1,149 bp that encoded a polypeptide of 383 amino acid residues. The polypeptide composed of 29 residues of signal peptide, a propeptide of 79 residues and a mature protein of 275 amino acids with a calculated molecular mass of 27,846 Da. This is the only report available to date on organic solvent tolerant protease from B. pumilus.     

脂解麻疯树油脂肪酶产生菌的筛选鉴定及其催化特性

[目的]分离筛选具有脂解麻疯树油能力的脂肪酶产生菌株,为以麻疯树油为原料酶法生产生物柴油奠定基础.[方法]以麻疯树油为唯一碳源,从麻疯树种子粉末处理过的土壤中分离筛选出1株具有脂解疯树油能力的脂肪酶产生菌,考察该菌株及其脂肪酶对有机溶剂耐受性以及脂肪酶催化酯化和转酯反应的能力,并通过生理生化特征和16S rDNA序列分...     

Staphylococcus lipolyticus sp. nov., a new cold-adapted lipase producing marine species

A cold-adapted lipase producing bacterium, designated SS-33^T, was isolated from sea sediment collected from the Bay of Bengal, India, and subjected to a polyphasic taxonomic study. Strain SS-33^T exhibited the highest 16S rRNA gene sequence similarity with Staphylococcus cohnii subsp. urealyticus (97.18 %), Staphylococcus saprophyticus subsp. bovis (97.16 %) and Staphylococcus cohnii subsp. cohnii (97.04 %). Phylogenetic analysis based on the 16S rRNA gene sequences showed that strain SS-33^T belongs to the genus Staphylococcus. Cells of strain SS-33^T were Gram-positive, coccus-shaped, non-spore-forming, non-motile, catalase-positive and oxidase-negative. The major fatty acid detected in strain SS-33^T was anteiso-C15:0 and the menaquinone was MK-7. The genomic DNA G + C content was 33 mol%. The DNA-DNA hybridization among strain SS-33^T and the closely related species indicated that strain SS-33^T represents a novel species of the genus Staphylococcus. On the basis of the morphological, physiological and chemotaxonomic characteristics, the results of phylogenetic analysis and the DNA-DNA hybridization, a novel species is proposed for strain SS-33^T, with the name Staphylococcus lipolyticus sp. nov. The strain type is SS-33^T (=MTCC 10101^T?=?JCM 16560^T). Staphylococcus lipolyticus SS-33^T hydrolyzed various substrates including tributyrin, olive oil, Tween 20, Tween 40, Tween 60, and Tween 80 at low temperatures, as well as mesophilic temperatures. Lipase from strain SS-33^T was partially purified by acetone precipitation. The molecular weight of lipase protein was determined 67 kDa by SDS-PAGE. Zymography was performed to monitor the lipase activity in Native-PAGE. Calcium ions increased lipase activity twofold. The optimum pH of lipase was pH 7.0 and optimum temperature was 30 °C. However, lipase exhibited 90 % activity of its optimum temperature at 10 °C and became more stable at 10 °C as compared to 30 °C. The lipase activity and stability at low temperature has wide ranging applications in various industrial processes. Therefore, cold-adapted mesophilic lipase from strain SS-33^T may be used for industrial applications. This is the first report of the production of cold-adapted mesophilic lipase by any Staphylococcus species.     

Lipase catalysed synthesis of sugar ester in organic solvents

Summary The synthesis of sugar esters catalysed by lipase in organic solvents was studied. Immobilized Candida and Mucor miehei lipase catalysed the synthesis of fructose and glucose esters of stearic acid in tertiary butyl alcohol with yields of 10 to 24 %. In the presence of phenyl or butyl boronic acid synthesis of glucose ester was achieved in hexane, heptane, benzene and toluene. The only positive reaction on disaccharides was found with palatinose.     

Purification and characterization of a novel organic solvent-tolerant and cold-adapted lipase from Psychrobacter sp. ZY124

By screening 25 different psychrophilic strains isolated from the Arctic habitat, we isolated a strain capable of producing lipase. We identified this strain as Psychrobacter sp. ZY124 based on the amplified 16S rDNA sequence. The lipase, named as Lipase ZC12, produced from the supernatant of Psychrobacter sp. ZY124 cultured at 15 °C was purified to homogeneity by ammonium sulfate precipitation followed by Phenyl Sepharose FF gel hydrophobic chromatography. Based on the obtained amino acid sequence, Lipase ZC12 is classified as a member of the Proteus/psychrophilic subfamily of lipase family I.1; it has a molecular weight of 37.9 kDa. We also determined that the apparent optimum temperature for Lipase ZC12 activity is 40 °C. Lipase ZC12 shows remarkable organic solvent tolerance by remaining more 50% after incubated with 10–90% different organic solvents. In addition, acyl chain esters with C12 or longer were confirmed to be preferable substrates for Lipase ZC12. Lipase ZC12 also shows better stereoselectivity for (R, S)-1-phenylethanol chiral resolution in n-hexane solvent with (S)-1-phenylethanol (ee_p 92%) and conversion rate (39%) by transesterification reactions. These properties may provide potential applications in biocatalysis and biotransformation in non-aqueous media, such as in detergent, transesterification or esterification and chiral resolution.

     

Cell surface hydrophobicity ofStaphylococcus aureus measured by the salt aggregation test (SAT)

Well-defined laboratory strains as well as 72 clinical strains ofStaphylococcus aureus isolated from bovine mastitis were investigated for surface hydrophobicity by the salt aggregation test (SAT).Staphylococcus aureus strain Cowan 1, rich in protein A and fibronectin-binding surface proteins, was found to show high surface hydrophobicity, whereas strain Wood 46, deficient in these surface proteins, showed low surface hydrophobicity. SAT showed a significant difference in surface hydrophobicity (P<0.001) between protein A-positive and A-negative strains measured by ²-test analysis. Comparison of SAT values with results obtained from hydrophobic interaction chromatography (HIC) showed a good correlation (P<0.025). A high-level protein-A-producing mutant (SA 113prA-3) showed increased surface hydrophobicity as compared with the parent strain (SA 113), whereas ten protein-A-negative mutants showed low surface hydrophobicity in SAT. Of the 72 clinical isolates tested by SAT, 47 (65%) showed autoaggregating properties, i.e., the strains aggregated even in isotonic buffers. Tween 80 (1% vol/vol) and ethylene glycol (50% vol/vol) prevented autoaggregation of some hydrophobic strains aggregating in phosphate-buffered saline. However, 2M of a chaotropic agent (NaSCN) was more efficient in preventing autoaggregation of the strains tested. Heating of cell suspensions to 80°C or 100°C as well as trypsin andStreptomyces griseus protease treatment generally caused a decrease in the cell surface hydrophobicity. This indicates that protein A, fibronectin-binding proteins, and probably other as yet unidentified proteins contribute to the high surface hydrophobicity of most strains isolated from bovine mastitis.     

Extracellular lipase from <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> JCM5962(T): Isolation,identification, and characterization

The study was done to isolate, identify, and characterize a good lipolytic strain from soil. Lipolytic strain isolation was done using tributyrin agar medium. The biochemical testing and 16S rRNA gene sequencing analysis was done for identification. The enzyme was purified using ammonium sulfate precipitation and column chromatography. Results have shown a novel high lipolytic strain of P. aeruginosa JCM5962(T), isolated from soil of sugarcane field. The 16S rRNA sequence analysis confirmed the strain as P. aeruginosa JCM5962(T); further, the sequence was submitted to Genbank (KX946966.1). The isolate produced an extracellular lipase which was purified as single band of 31 kDa. Maximum lipase activity was observed at 50 °C and pH 8.0. Activity was enhanced in the presence of cobalt and benzene solvent, whereas mercury, sodium dodecyl sulfate, and chloroform inhibited it. The enzyme’s marked stability and activity at high temperature, alkaline pH and organic solvents suggest that this can be effectively used in a variety of applications in industries and as biotechnological tools.     

Purification and characterization of extracellular tannin acyl hydrolase from <Emphasis Type="Italic">Aspergillus heteromorphus</Emphasis> MTCC 8818

A tannase (E.C. 3.1.1.20) producing fungal strain was isolated from soil and identified as Aspergillus heteromorphus MTCC 8818. Maximum tannase production was achieved on Czapek Dox minimal medium containing 1% tannic acid at a pH of 4.5 and 30°C after 48 h incubation. The crude enzyme was purified by ammonium sulfate precipitation and ion exchange chromatography. Diethylaminoethyl-cellulose column chromatography led to an overall purification of 39.74-fold with a yield of 19.29%. Optimum temperature and pH for tannase activity were 50°C and 5.5 respectively. Metal ions such as Ca²⁺, Fe²⁺, Cu¹⁺, and Cu²⁺ increased tannase activity, whereas Hg²⁺, Na¹⁺, K¹⁺, Zn²⁺, Ag¹⁺, Mg²⁺, and Cd²⁺ acted as enzyme inhibitors. Various organic solvents such as isopropanol, isoamyl alcohol, benzene, methanol, ethanol, toluene, and glycerol also inhibited enzyme activity. Among the surfactants and chelators studied, Tween 20, Tween 80, Triton X-100, EDTA, and 1, 10-o-phenanthrolein inhibited tannase activity, whereas sodium lauryl sulfate enhanced tannase activity at 1% (w/v).     

Isolation and characterization of BTEX tolerant and degrading Pseudomonas putida BCNU 106

Bacterial strains growing in river sediments were screened to identify an organic solvent-tolerant strain of Pseudomonas. Using this screen, Pseudomonas sp. BCNU 106 was isolated on the basis of its ability to grow on benzene, toluene, ethylbenzene, and three xylene isomers, o-, m- and p-xylene, as its sole carbon source. BCNU 106 was identified as a gram-negative, rod-shaped aerobic and mesophilic bacterium, which grew in liquid media containing high concentrations of organic solvents. 16S rDNA analysis classified BCNU 106 as a new member of the genus Pseudomonas. BCNU 106 was distinguishable from other Pseudomonas strains that are tolerant to organic solvents in that the isolate had the ability to utilize all three xylene isomers as well as benzene, toluene and ethylbenzene. The unique properties of the isolate such as solvent-tolerance and the ability to degrade xylene isomers may have important implications for the efficient treatment of solvent wastes.     

Three New Lipases from Actinomycetes and Their Use in Organic Reactions

Three novel lipase-producing microorganisms have been isolated from 526 actinomycete strains by employing screening techniques on solid media. Time-course and scale-up of enzyme production were analyzed. The lipases, produced by microorganisms belonging to the Streptomyces genus, were tested in several reactions in organic medium using unnatural substrates. The lyophilized crude lipases are stable at least for 1 month at 4°C (100% recovered activity). The lipase activity per milliliter of cell culture broth was higher than described in the literature for other lipases from actinomycetes. The three selected lipases displayed better activity than commercial lipase from Candida rugosa in the resolution of chiral secondary alcohols. The lipase from S. halstedii also displayed very good activity in the synthesis of carbamates.     

Imidazolium chloride‐based ionic liquid‐assisted improvement of lipase activity in organic solvents

The activity of a lipase from a newly isolated Pseudomonas sp. was investigated in the presence of organic solvents and imidazolium chloride‐based ionic liquids (IL) such as BMIM[Cl] and HMIM[Cl]. The lipase activity in the presence of IL was higher compared to that in common organic solvents such as methanol and 2‐propanol. A possible explanation for the enzyme activation might be the structural changes induced in the protein in organic systems. Since IL quench the intensity of fluorescence emission, it was not possible to investigate the major factor that influences the enzyme behavior in these new organic salts. Furthermore, the enzyme exhibited excellent activity in buffer mixtures containing both organic solvent and IL. The stability of the lipase at 50°C was considerably increased in the presence of 20% BMIM[Cl] compared with the untreated lipase in aqueous medium. The light scattering method clearly showed that prevention of aggregation could be the reason for thermal stabilization at 50°C in reactions containing IL. Kinetic analysis of the enzyme in the presence of different concentrations of IL showed that the K_m value increased from 0.45 mM in aqueous buffer to 2.4 mM in 50% v/v BMIM[Cl]/buffer. The increase in K_m indicates that IL can significantly reduce the binding affinity of the substrate to the enzyme. Also, a linear correlation was observed between the BMIM[Cl] concentration and V_max of the enzyme. As the concentration of BMIM[Cl] increased from 10 to 50% v/v, the V_max value increased from 1.8 to 46 μM/min.     

Effect of the immobilization protocol on the properties of lipase B from Candida antarctica in organic media: Enantiospecifc production of atenolol acetate

In this work, we intend to check the effect of the immobilization protocol on the performance of lipase B from Candida antarctica (CalB) in organic medium. To this purpose, CalB has been immobilized on Eupergit C (EC) under different conditions and on EC partially modified with ethylenediamine (EDA), iminodiacetic acid (IDA) or metal chelate (IDA-Cu²⁺) and used for kinetic resolution of (R/S) 4-[2-hydroxy-3-[(1-methylethyl)amino]propoxy]benzeneacetamide (rac-atenolol). Enantiomeric resolution of atenolol was carried out by a transesterification reaction using vinyl acetate as acylant agent and an organic solvent as reaction medium. After a preliminary optimization of the reaction to obtain satisfactory yields, toluene was selected as the optimal solvent and the performances of the different CalB biocatalysts were compared. The R enantiomer was preferred in all cases but their performances were substantially different, with high differences in reaction rates, reaction yields in this kinetically controlled synthesis (EC-CalB gave a conversion of 76% while EC-IDA-Cu²⁺-CalB gave just a 27%), and enantiospecificities (EC-CalB gave an E value of 65 while EC-IDA-Cu²⁺-CalB gave a value of 13). Replacing toluene with hexane caused a decrease in enzyme activity, reaction yields and enantiospecificity of the reaction. It was remarkable that some preparations were much more sensitive to this solvent change than others. Considering that the activity decreased by less than 10% per reaction cycle, these differences are likely associated with the differences in the enzyme catalytic properties caused by the different immobilization protocols and not by inactivation of immobilized enzyme preparations during the reaction. These results confirmed that use of different immobilization protocols may be a powerful tool for altering enzyme properties when used in organic media.