重组分枝杆菌噬菌体检测分枝杆菌的发光研究

采用生物发光方法检测重组的分支杆菌噬菌体对不同细菌的发光反应,并比较了仅在特定的温度范围内才能繁殖的温敏噬菌体Phage 88和正常噬菌体Phage 40对分枝杆菌感染活力测定时发光强度的差异,以建立用不同类型重组噬菌体检测结核分枝杆菌耐药性的方法和条件.结果显示两种噬菌体对各种分枝杆菌作用后均有发光,对非分枝杆菌发光值很低,两者差异有显著性;不同的分枝杆菌发光值有差异：卡介苗的发光值最高,结核分枝杆菌的发光值最低;温敏噬菌体Phage 88的检测灵敏度大于正常噬菌体Phage 40,差异显著.因此可认为两株噬菌体均可特异地检测结核分枝杆菌,但Phage 88的效果优于Phage 40.     

分枝杆菌噬菌体生物学特性探讨

为了确定不同分枝杆菌噬菌体的宿主菌以及扩增方法和最佳保存方法,观察了七种分枝杆菌噬菌体对结核分枝杆菌、耻垢分枝杆菌的裂解情况,并分别于感染后 24、48小时采用离心 过滤、孵育 过滤方法收集噬菌体比较扩增效率,采用不同稳定剂对分枝杆菌噬菌体进行液体和冻干保存,在不同时间段采用琼脂双层法检测其效价。结果显示:①D29分枝杆菌噬菌体能同时较高效地裂解结核分枝杆菌和耻垢分枝杆菌;②感染 48小时后采用孵育 过滤方法收集的噬菌体效价高,方法简单;③液体 4℃保存的噬菌体稳定性好, 70℃液体保存和冻干后 4℃、室温、37℃保存依据不同稳定剂而相差较大。因此,在 48小时后采用孵育 过滤方法收集噬菌体具有高效率特性并且简单易行,噬菌体液体 4℃保存简单、有效,值得推荐。     

噬菌体裂解酶——现状与未来

噬菌体裂解酶是一种由DNA噬菌体基因编码的高特异性酶, 可高效消化细菌细胞壁。革兰氏阳性菌噬菌体裂解酶的结构域相似, 裂解效率高, 与抗生素具协同抗菌作用, 且不易产生耐受性菌株, 抗体等体液因子对裂解酶的裂解活性影响小, 裂解酶作为一种潜在抗感染药物具有重要的研究价值。目前已建立了多种病原菌裂解酶应用的动物模型, 在防控耐药性病原菌感染上取得重要进展。本文就噬菌体裂解酶的抗菌作用进行综述。     

噬菌体裂解酶应用研究进展

近年来,随着抗生素的滥用,导致多重耐药性菌株出现的频率加快。因细菌感染导致死亡的人数逐年增多,人类健康面临巨大挑战,因此研制新型抗菌药物刻不容缓。噬菌体裂解酶因其高效的杀菌能力及高度的宿主专一性而成为新一代抗菌制剂的候选之一。其是一种细胞壁水解酶,在双链DNA噬菌体复制后期被合成,通过水解细胞壁肽聚糖上的化学键,从而裂解细菌细胞壁,释放出子代噬菌体。本文系统地介绍了噬菌体裂解酶的研究进展,为相关裂解酶抗菌药物的研发做出有益探索。     

分支杆菌噬菌体D29 Lysin B的表达、纯化及酶学性质分析

克隆表达噬菌体D29 LysinB(LysB)并对其酶学性质进行研究。以噬菌体D29基因组为模板,用PCR方法扩增lysB基因,与表达载体pET22b连接,将重组质粒转化至Escherichiacoli BL21(DE3)中表达,镍柱亲和层析(Ni-NTA)纯化可溶性表达产物,并对重组蛋白的活性进行分析检测。结果表明:成功构建了pET22b-lysB表达载体,并从1L的LB培养物中获得了33.2mg高纯度重组蛋白(His-LysB);His-LysB具有分解脂肪的能力,属于脂肪酶;生物化学特性分析表明:丁酸对硝基苯(pNPB)为水解底物,His-LysB热稳定性不佳,30℃以下比较稳定,随着温度的升高,稳定性逐渐降低;该蛋白具有较高的pH值适应性,pH5.0~9.5范围内稳定性较高;在23℃和pH7.5时酶活力最高,其比酶活为1.3U/mg;金属离子Zn2+、Cu2+、Mg2+、Mn2+和苯甲基磺酰氟(PMSF)抑制剂对酶活具有强烈的抑制作用。本研究为开发新的治疗结核药物提供了一个新的选择。     

提高噬菌体裂解酶抗菌活性的研究进展

随着细菌耐药性问题的日益严重,人们开始寻求新型抗菌制剂。噬菌体裂解酶是一种由ds DNA噬菌体编码的水解酶,能高效特异性地裂解细菌细胞壁且不易使细菌产生耐药性。由于天然裂解酶具有宿主谱窄,不能裂解革兰阴性菌等缺点,研究者对裂解酶进行了大量的设计改造。本研究主要对提高噬菌体裂解酶抗菌活性的研究进展进行综述。     

以分枝杆菌噬菌体为例探索生命科学研究型教学

综合多学科技术手段研究生物体系复杂问题,是目前生物医学研究的显著特征之一,这为本科生教学改革提出了新的更高的要求。噬菌体是开展生命科学研究型教学改革的理想生物材料。文章借鉴美国匹斯堡大学牵头的美国大学生物学教学改革项目“噬菌体猎人”的实践,总结了本课题组近5年来将分枝杆菌噬菌体科研成果转化为本科生命科学研究型教学的经验。     

噬菌体裂解酶的抗菌特性

摘要：噬菌体裂解酶是一类细胞壁水解酶,可水解肽聚糖,造成细菌的破裂。裂解酶一般具有两到三个结构域,参与对底物的催化和结合。作为一种新型的杀菌制剂,裂解酶已被越来越多地应用于化脓链球菌、肺炎链球菌、金黄色葡萄球菌等革兰氏阳性细菌病的治疗。与抗生素治疗相比,裂解酶不易使细菌产生抗性且作用相对专一,这可能是解决现在日趋严重的细菌耐药性的一种可行方法。另外,裂解酶还具有高效性,作用协同性,且自身抗体不削弱其作用等优势,使之成为未来预防、控制致病菌一种可能的新途径。     

一株沙门氏菌裂解性噬菌体的分离鉴定及生物学特性

【目的】从贝类样品中分离到一株沙门氏菌裂解性噬菌体SLMP1,对其进行鉴定及生物学特性分析。【方法】采用双层平板法从贝类样品中分离沙门氏菌噬菌体SLMP1,观察噬菌斑特征,分析SLMP1的宿主范围;利用聚乙二醇8000沉淀浓缩SLMP1颗粒,用氯化铯等密度梯度离心纯化;采用透射电子显微镜观察纯化的SLMP1颗粒;采用酚-氯仿法提取SLMP1核酸,通过核酸酶处理分析核酸类型;分析SLMP1的热稳定性、pH稳定性、最佳感染复数、一步生长曲线及裂菌效果。【结果】SLMP1噬菌斑直径约2–3 mm,圆形透明、边缘清晰;SLMP1能裂解肠沙门氏菌肠亚种和鼠伤寒沙门氏菌;SLMP1头部呈二十面体,直径约62 nm,含非收缩性尾部,尾长约110 nm,属于长尾病毒科;SLMP1核酸为双链DNA;SLMP1在30–60 °C稳定,在pH 4.0–11.0稳定,最佳感染复数为0.001,感染宿主菌潜伏期为10 min、裂解期为120 min、裂解量为51;SLMP1在液体环境中具有良好的裂菌效果。【结论】SLMP1属dsDNA长尾科裂解性噬菌体,具有沙门氏菌生物抑菌剂的应用潜力。     

噬菌体群体感应系统及其分子机理研究进展

群体感应(Quorum Sensing,QS)是微生物群体在生长过程中,随着群体密度的增加,其分泌的信号分子的浓度达到一定阈值后与微生物体内特定受体结合,从而影响微生物特定基因表达,导致其生理和生化特性的变化,表现出少量菌体或单个菌体所不具备的特征。1994年Fuqua提出群体感应概念后就成为微生物领域的研究热点。然而,群体感应的研究主要集中在细菌中,但近年来群体感应在噬菌体、真菌中也不断被发现,尤其自2017年Erez在多种枯草芽孢杆菌噬菌体中发现群体感应现象,并且揭示噬菌体群体感应主要调控其溶源-裂解途径的转换。近年来的研究又陆续在其他噬菌体中发现了群体感应。本文综述了噬菌体群体感应系统最新研究进展及其相关的基因功能和分子机理。     

Insertion into the Mycobacterium smegmatis genome of the aph gene through lysogenization with the temperate mycobacteriophage Ms6

A derivative of the temperate mycobacteriophage Ms6 containing the aph gene from transposon Tn5 was constructed. In the transductants the aph gene was integrated in the bacterial genome. The aph gene is stably maintained in the absence of positive selection after more than 150 generations. The results presented in this report show that Ms6 can be used as a vehicle for the integration of foreign DNA into the Mycobacterium smegmatis genome.     

Isolation,characterization and mapping of temperature-sensitive mutants of mycobacteriophage I3

Eighteen temperature-sensitive mutants of mycobacteriophage I3 have been isolated and partially characterized. All the mutants were defective in vegetative replication. Based on temperature shift experiments with the temperature sensitive mutants, the thermosensitive phase of the phage development period has been characterized for each mutant. The genes have been mapped by recombination analysis. The early, continuous and middle genes seem to cluster on the genetic map     

Requirement for calcium ions in mycobacteriophage I3 DNA injection and propagation

Ca²⁺ ions are absolutely necessary for the propagation of mycobacteriophage I3 in synthetic medium. These ions are required for successful infection of the host and during the entire span of the intracellular development of the phage. A direct assay of the phage DNA injection using ³²[P] labelled phage, showns that Ca²⁺ ions are necessary for the injection process. The injection itself is a slow process and takes 15 min to complete at 37°C. The bacteria infected in presence of Ca²⁺ tend to abort if the ions are subsequently withdrawn from the growth medium. The effect of calcium withdrawal is maximally felt during the early part of the latent period; however, later supplementation of Ca²⁺ ions salvage phage production and the mature phage progeny appear after a delayed interval, proportional to the time of addition of Ca²⁺.Abbreviations moi multiplicity of infection - PFU plaque forming units - EGTA ethylene-glycol-bis (-aminoethyl ether) N,N-tetraacetic acid     

Efficient switching of mycobacteriophage L5-based integrating plasmids in Mycobacterium tuberculosis

We previously used a mycobacteriophage L5-derived integrating vector to demonstrate that glnE and aroK are essential genes in Mycobacterium tuberculosis by showing that we were unable to excise the integrated vector when it carried the only functional copy of these genes. We tested three systems to replace the integrated copy with alternative alleles. The most efficient method was to transform the strain with a second copy of the integrating vector. Excision of the resident vector and integration of the incoming vector occurred at an extremely high efficiency. This technique will allow us to study the role and functionality of essential genes in this important human pathogen.     

Isolation and complete genome sequence of a novel virulent mycobacteriophage,CASbig

<正>Dear Editor,Bacteriophages are powerful tools for investigating and manipulating their hosts(Fernandes et al.,2014).This holds particularly true for mycobacteriophages,which have facilitated the development of mycobacterial genetic systems and have generated tools for the clinical     

High-level expression of the colicin A lysis protein

Summary Two plasmids that overproduce the colicin A lysis protein, Cal, are described. Plasmid AT1 was constructed by a deletion in the colicin A operon, which placed thecal gene near a truncatedcaa gene in such a way that both gene products were synthesized at high levels following induction. Plasmid Ck4 was constructed by insertion of thecal gene downstream from thetac promoter of an expression vector. Overproduction of Cal was obtained after mitomycin C induction of pAT1 cells and after IPTG induction of pCK4 cells. The kinetics of Cal synthesis were examined with [³⁵S] methionine and [2-³H] glycerol inlpp orlpp ⁺ host strains. Each of the steps of the lipid modification and maturation pathway of Cal was demonstrated. The modified precursor form of overproduced Cal was not chased as efficiently as when it is produced in pColA cells. After treatment with globomycin, a significant amount of this modified precursor form accumulated and was degraded with time into smaller acylated proteins, but without release of the signal peptide. Release of cellular proteins and quasi-lysis were observed after about 1 hour of induction for cells containing either plasmid. In addition, in Cal-overproducing cells, the rate of quasi-lysis was increased but not its extent. InpldA cells, quasi-lysis was reduced but not abolished. Lethality of the Cal induction in the overproducing cells was in the same range as that in wild-type cells.     

Presence of mycobacteriophage I3-like DNA sequences in the genome of its host Mycobacterium smegmatis

The genomes of phage I3 and its host Mycobacterium smegmatis have been compared. From thermal melting studies the GC contents of DNA from mycobacteriophage I3 and its host M. smegmatis were found to be 66%. A new method, based only on the initial rates of reassociation, has been developed for calculating the DNA homology. Analysis of DNA reassociation kinetics suggested the presence of one equivalent of the phage I3 genome within the M. smegmatis genome. Southern analysis revealed the presence of almost all of the phage I3 specific sequences within the host genome.