In Vitro Antifungal Susceptibility of Malassezia pachydermatis Strains Isolated from Dogs with Chronic and Acute Otitis Externa

Malassezia pachydermatis is a yeast that is frequently involved as a secondary/perpetuating factor in canine otitis externa. Topical therapies with different antifungal agents, mainly azole compounds, are generally successful in controlling the yeast overgrowth, but treatment failure and rapid recurrences are common. This study compared the in vitro antifungal susceptibility of M. pachydermatis isolates obtained from chronic and acute cases of otitis externa. The aim was to assess the possible onset of resistance mechanisms in isolates involved in long-lasting episodes with poor response to treatment. We evaluated the in vitro susceptibility to miconazole (MCZ) and clotrimazole (CTZ) of 42 isolates of M. pachydermatis obtained from dogs with chronic (group A, n = 25) and acute otitis (group B, n = 17), using a modified CLSI M27-A3 microdilution method. All isolates were inhibited by the antifungal agents employed, but Malassezia isolates from group A were significantly associated with higher minimum inhibitory concentration (MIC) values for both agents (Median MIC values: MCZ group A 2 µg/ml, group B 1 µg/ml; CTZ group A 8 µg/ml, group B 4 µg/ml). These findings prove that these isolates had a reduced in vitro susceptibility to the antifungal agents tested. However, it is unlikely that this could have any influence on the outcome of a topical treatment. Indeed, marketed products include concentrations of the tested agents that largely exceed even the highest MICs found in this study (in most cases at least 1,000 × the MIC, or greater). In conclusion, this study suggests that isolates of M. pachydermatis involved in chronic cases of canine external otitis and exposed to repeated antifungal treatments are unlikely to develop mechanisms of resistance of clinical relevance.     

Veronaea botryosa: Molecular Identification with Amplified Fragment Length Polymorphism (AFLP) and In vitro Antifungal Susceptibility

Inter- and intraspecific genomic variability of 18 isolates of Veronaea botryosa originating from clinical and environmental sources was studied using amplified fragment length polymorphism (AFLP). The species was originally described from the environment, but several severe cases of disseminated infection in apparently healthy individuals have been reported worldwide. All tested strains of V. botryosa, identified on the basis of sequencing and phenotypic and physiological criteria prior to our study, were confirmed by AFLP analysis, yielding a clear separation of V. botryosa as a rather homogeneous group from related species. In vitro antifungal susceptibility testing resulted in MIC₉₀s across all strains in increasing order posaconazole (0.25 μg/ml), itraconazole (1 μg/ml), voriconazole (4 μg/ml), terbinafine (4 μg/ml), caspofungin (8 μg/ml), anidulafungin (8 μg/ml), isavuconazole (16 μg/ml), amphotericin B (16 μg/ml), and fluconazole (32 μg/ml). Overall, the isolates showed a uniform pattern of low MICs of itraconazole and posaconazole, but high MICs for remaining agents. The echinocandins (caspofungin and anidulafungin) had no activity against V. botryosa. There was no statistically significant difference between susceptibilities of environmental (n = 11) and clinical (n = 7) isolates of V. botryosa (P > 0.05).     

Isavuconazole and Nine Comparator Antifungal Susceptibility Profiles for Common and Uncommon Candida Species Collected in 2012: Application of New CLSI Clinical Breakpoints and Epidemiological Cutoff Values

The in vitro activity of isavuconazole and nine antifungal comparator agents was assessed using reference broth microdilution methods against 1,421 common and uncommon species of Candida from a 2012 global survey. Isolates were identified using CHROMagar, biochemical methods and sequencing of ITS and/or 28S regions. Candida spp. were classified as either susceptible or resistant and as wild type (WT) or non-WT using CLSI clinical breakpoints or epidemiological cutoff values, respectively, for the antifungal agents. Isolates included 1,421 organisms from 21 different species of Candida. Among Candida spp., resistance to all 10 tested antifungal agents was low (0.0–7.9 %). The vast majority of each species of Candida, with the exception of Candida glabrata, Candida krusei, and Candida guilliermondii (modal MICs of 0.5 µg/ml), were inhibited by ≤0.12 µg/ml of isavuconazole (99.0 %; range 94.3 % [Candida tropicalis] to 100.0 % [Candida lusitaniae and Candida dubliniensis]). C. glabrata, C. krusei, and C. guilliermondii were largely inhibited by ≤1 µg/ml of isavuconazole (89.7, 96.9 and 92.8 %, respectively). Decreased susceptibility to isavuconazole was most prominent with C. glabrata where the modal MIC for isavuconazole was 0.5 µg/ml for those strains that were SDD to fluconazole or WT to voriconazole, and was 4 µg/ml for those that were either resistant or non-WT to fluconazole or voriconazole, respectively. In conclusion, these data document the activity of isavuconazole and generally the low resistance levels to the available antifungal agents in a large, contemporary (2012), global collection of molecularly characterized species of Candida.     

pH-induced flocculation,indirect electrocoagulation,and hollow fiber filtration techniques for harvesting the saltwater microalga Dunaliella

This research assessed the efficacy of three harvesting methods on a strain of Dunaliella viridis. While there is strong potential to use lipids from microalgae as a feedstock for biofuels to replace petroleum-based fuel, at present microalgal harvesting for biofuel production is not yet economically feasible or energy efficient. pH-induced flocculation (by adjusting the pH of exponentially growing cells), indirect electrocoagulation (applying aluminum hydroxide coagulant to culture), and hollow fiber filtration (separating biomass from medium using tangential flow) were compared as potential harvesting mechanisms for small-scale (3–10 L) and large-scale (30–150 L) volumes of D. viridis. Both pH-induced flocculation and electrocoagulation yielded significant biomass recovery (>95 %), but both methods required removal of added chemicals and/or coagulant before the medium could be reused. In contrast, hollow fiber filtration did not require added chemicals or coagulant, and as another advantage, the filtrate was successfully reused as culture medium without apparent detrimental effects on cell size, cell shape, or cell production. When high salinity stress was imposed on the concentrate produced from the filtration method, total fatty acids (FAs) did not increase. However, total FAs did significantly increase after hollow fiber filtration (49 %) in comparison to FA content before filtration (36 %). This research indicates that hollow fiber filtration as a commercial harvesting mechanism offers attractive advantages as a harvesting mechanism for microalgae such as Dunaliella, relative to pH-induced flocculation and indirect electrocoagulation.     

Antifungal Activities of Diphenyl Diselenide alone and in Combination with Fluconazole or Amphotericin B against Candida glabrata

Here, we evaluated combinations of diphenyl diselenide [(PhSe)₂] with fluconazole and amphotericin B in a checkerboard assay against clinical Candida glabrata strains. Minimal inhibitory concentration (geometric mean) ranged from 0.25 to >64 (5.16 μg/mL) for (PhSe)₂, 1 to 32 (5.04 μg/mL) for fluconazole and 0.06 to 0.5 (0.18 μg/mL) for amphotericin B. Synergistic (76.66 %) and indifferent (23.34 %) interactions were observed for (PhSe)₂ + amphotericin B combination. (PhSe)₂ + fluconazole combination demonstrated indifferent (50 %) and antagonistic (40 %) interactions, whereas synergistic interactions were observed in 10 % of the isolates. New experimental in vivo protocols are necessary and will promote a better understanding of the antimicrobial activity of (PhSe)₂ against C. glabrata and its use as an adjuvant therapy with antifungal agents.     

Comparative evaluation of the activity of plant infusions against Helicobacter pylori strains by three methods

The aim of the study was to assess the activities of six plant infusions against Helicobacter pylori strains using a comparative screening assay (CSA), agar-well diffusion method (AWDM) and microscopy. Green tea, St John’s wort (SJW), rooibos, peppermint, chamomile and lime flower aqueous infusion concentrations were chosen to mimic those in herbal teas/tisanes. CSA concentrations were 4.5 mg ml^?1 for chamomile and 6.8 mg ml^?1 for the other agents. AWDM amounts were 0.4 mg/well for the chamomile and 0.6 mg/well for the other agents. Using CSA, ≥8 × 10⁴ colony forming unit reduction was found in >60 % of the strains by the green tea (81.5 %), SJW (75.9 %) and rooibos (63.0 %) within 2 h. Similarly, by AWDM, the activity against >60 % of the strains was found by the green tea, SJW and rooibos. Gram staining results were alike, showing mostly/only coccoids in >66 % of the strains by the same three agents within 2 h. Lime flowers showed the lowest activity by all methods. In conclusion, CSA allows comparing the activities of many agents against numerous strains. To our knowledge, these are the first data about rooibos and lime flower activities against H. pylori. All the three methods revealed that the most active agents were the green tea, SJW and rooibos, which also possess additional beneficial properties, e.g. antioxidant, anti-inflammatory and antitumor effects, therefore these plants may have a beneficial use as prophylactic agents against or adjuvants in the therapy of H. pylori infection.     

Antimicrobial Activities of Bacteriocins E 50–52 and B 602 Against Antibiotic-Resistant Strains Involved in Nosocomial Infections

The antimicrobial spectra of previously published bacteriocin E 50–52 (39 a.a.; 3,932 Da; pI = 8.5) and bacteriocin B 602 (29 a.a.; 3,864 Da; pI = 7.2) were determined. Named peptides were related to class IIa (pediocin-like) bacteriocins. Minimal inhibitory concentrations (MICs) of bacteriocins have been determined for bacterial isolates that were causative agents of nosocomial infections collected from Russian hospitals in 2003–2007, namely methicillin-resistant Staphylococcus aureus (MRSA) (n = 10); Acinetobacter baumannii (n = 11); Citrobacter freundii (n = 8); Escherichia coli (n = 9); Klebsiella pneumoniae (n = 10); Proteus spp. (n = 6); and Pseudomonas aeruginosa (n = 10). The majority of these tested isolates have been shown to be multidrug resistant and carry genetic determinants of antimicrobial resistance that were detected using polymerase chain reaction (PCR). The MICs of bacteriocin B 602 ranged from ≤0.025–1.56 μg/ml, and for bacteriocin E 50–52 from 0.05 to 6.25 μg/ml for all of 64 bacterial clinical isolates tested. Interestingly, the bacteriocins studied demonstrate activity on both Gram-positive and Gram-negative bacteria. Bacteriocins E 50–52 and B 602 show good activity against nosocomial bacterial agents resistant to many classes of modern antibacterials used in clinical practice. These bacteriocins should be examined as an alternative in treating infections caused by such agents.     

Medium chain length polyhydroxyalkanoate (mcl-PHA) production from volatile fatty acids derived from the anaerobic digestion of grass

A two step biological process for the conversion of grass biomass to the biodegradable polymer medium chain length polyhydroxyalkanoate (mcl-PHA) was achieved through the use of anaerobic and aerobic microbial processes. Anaerobic digestion (mixed culture) of ensiled grass was achieved with a recirculated leach bed bioreactor resulting in the production of a leachate, containing 15.3 g/l of volatile fatty acids (VFAs) ranging from acetic to valeric acid with butyric acid predominating (12.8 g/l). The VFA mixture was concentrated to 732.5 g/l with a 93.3 % yield of butyric acid (643.9 g/l). Three individual Pseudomonas putida strains, KT2440, CA-3 and GO16 (single pure cultures), differed in their ability to grow and accumulate PHA from VFAs. P. putida CA-3 achieved the highest biomass and PHA on average with individual fatty acids, exhibited the greatest tolerance to higher concentrations of butyric acid (up to 40 mM) compared to the other strains and exhibited a maximum growth rate (μ_MAX?=?0.45 h^?1). Based on these observations P. putida CA-3 was chosen as the test strain with the concentrated VFA mixture derived from the AD leachate. P. putida CA-3 achieved 1.56 g of biomass/l and accumulated 39 % of the cell dry weight as PHA (nitrogen limitation) in shake flasks. The PHA was composed predominantly of 3-hydroxydecanoic acid (>65 mol%).     

Consequential cradle-to-gate carbon footprint of water treatment chemicals using simple and complex marginal technologies for electricity supply

Purpose

Chemicals produced via chlor-alkali electrolysis are widely used throughout the water industry worldwide, with treatment chemicals often the second largest source of environmental impacts from potable water production after electricity use. Population-driven increases in the future demand for potable water will require concomitant increases in the production of water treatment chemicals, with the associated environmental impacts of chemicals production primarily arising from the additional demand for electricity. Due to the dominance of electricity in the environmental performance of chlor-alkali chemicals, assessment of the future environmental impacts of potable water production is largely dependent on proper identification of the marginal source of electricity. In this paper, we present a consequential cradle-to-gate carbon footprint (cCF) for the most widely used chlor-alkali-produced disinfectant (sodium hypochlorite (13 % w/w)) and coagulant (ferric chloride (42 % w/w)) in Australia, with special emphasis placed upon the identification of future marginal electricity supply and the substitution of hydrogen gas and sodium hydroxide during production. While this analysis is presented in an Australian context, commonalities in potable water and chlor-alkali chemical production processes internationally give the findings a broader relevance.

Methods

Consequential models for sodium hypochlorite (13 % w/w) and ferric chloride (42 % w/w) production were developed, and the identification of the marginal source of electricity was modelled using a “simple marginal technology” approach via operationalisation of the Weidema framework and a “complex marginal technology” using a partial equilibrium model. For the simple marginal technology, the levelised cost of electricity was used to select the most competitive energy generation technologies and those most relevant for the Australian market. For the complex marginal technology, the energy sector model was used to simulate the most likely electricity supply mix. Details of the different paths taken in the substitution of hydrogen gas and sodium hydroxide are also presented. To allow for proper incorporation of uncertainties arising from these key factors in the cCF, several scenarios were developed covering fuel and carbon prices for identifying the marginal supply mix of electricity, as well as the likely production routes for sodium carbonate in the context of sodium hydroxide substitution.

Results and discussion

cCF results of sodium hypochlorite (13 % w/w) and ferric chloride (42 % w/w) are presented using simple and complex marginal technologies, and the implications of choosing one marginal technology over the other in the context of water treatment chemicals are presented. For the simple marginal technology approach, the global warming potential (GWP) per megagram of chemical varied from 68 to 429 kg CO₂-eq for sodium hypochlorite (13 % w/w) and 59–1,020 kg CO₂-eq for ferric chloride (42 % w/w). For the complex marginal technology approach, the GWP per megagram of chemical varied from 266 to 332 kg CO₂-eq for sodium hypochlorite (13 % w/w) and 214–629 kg CO₂-eq for ferric chloride (42 % w/w). Insights are given in relation to the impact of the price of fossil fuels, the carbon price, and the different substitution routes.

Conclusions

The use of a partial equilibrium model (PEM) has enabled a better understanding of the variability of the results in this study. For example, the use of PEM for the identification of the complex marginal source of electricity shows that, for the case of Australia, any benefit from a carbon price is lost with high prices of natural gas due to the incentive to use cheaper fuels such as black and brown coal. Likewise, the use of explorative scenarios was decisive to manage the inherent uncertainty of the parameters included in the model. In relation to substitution, the case of ferric chloride (42 % w/w) indicated that using only one substitution route was not enough to fully understand the potential continuum of cCF results. The simple marginal approach, where an exclusive marginal source of electricity or substitution route is considered, presents significant risks for the modelling accuracy of the cCF as shown here for sodium hypochlorite (13 % w/w) and ferric chloride (42 % w/w), therefore, it is not recommended.     

2,3-Butanediol production from starch by engineered Klebsiella pneumoniae G31-A

2,3-Butanediol (2,3-BD) is an organic compound, which is widely used as a fuel and fuel additive and applied in chemical, food, and pharmaceutical industries. Contemporary strategies for its economic synthesis include the development of microbial technologies that use starch as cheap and renewable feedstock. The present work encompasses the metabolic engineering of the excellent 2,3-BD producer Klebsiella pneumoniae G31. In order to perform direct starch conversion into 2,3-BD, the amyL gene encoding quite active, liquefying α-amylase in Bacillus licheniformis was cloned under lac promoter control in the recombinant K. pneumoniae G31-A. The enhanced extracellular over-expression of amyL led to the highest extracellular amylase activity (68 U/ml) ever detected in Klebsiella. The recombinant strain was capable of simultaneous saccharification and fermentation (SSF) of potato starch to 2,3-BD. In SSF batch process by the use of 200 g/l starch, the amount of total diols produced was 60.9 g/l (53.8 g/l 2,3-BD and 7.1 g/l acetoin), corresponding to 0.31 g/g conversion rate. The presented results are the first to show successful starch conversion to 2,3-BD by K. pneumoniae in a one-step process.     

In vitro selection of transgenic sugarcane callus utilizing a plant gene encoding a mutant form of acetolactate synthase

Selection genes are routinely used in plant genetic transformation protocols to ensure the survival of transformed cells by limiting the regeneration of non-transgenic cells. In order to find alternatives to the use of antibiotics as selection agents, we followed a targeted approach utilizing a plant gene, encoding a mutant form of the enzyme acetolactate synthase, to convey resistance to herbicides. The sensitivity of sugarcane callus (Saccharum spp. hybrids, cv. NCo310) to a number of herbicides from the sulfonylurea and imidazolinone classes was tested. Callus growth was most affected by sulfonylurea herbicides, particularly 3.6 μg/l chlorsulfuron. Herbicide-resistant transgenic sugarcane plants containing mutant forms of a tobacco acetolactate synthase (als) gene were obtained following biolistic transformation. Post-bombardment, putative transgenic callus was selectively proliferated on MS medium containing 3 mg/l 2,4-dichlorophenoxyacetic acid (2,4-D), 20 g/l sucrose, 0.5 g/l casein, and 3.6 μg/l chlorsulfuron. Plant regeneration and rooting was done on MS medium lacking 2,4-D under similar selection conditions. Thirty vigorously growing putative transgenic plants were successfully ex vitro-acclimatized and established under glasshouse conditions. Glasshouse spraying of putative transgenic plants with 100 mg/l chlorsulfuron dramatically decreased the amount of non-transgenic plants that had escaped the in vitro selection regime. PCR analysis showed that six surviving plants were als-positive and that five of these expressed the mutant als gene. This report is the first to describe a selection system for sugarcane transformation that uses a selectable marker gene of plant origin targeted by a sulfonylurea herbicide.     

Size-selective predation by all-male prawns: implications for sustainable biocontrol of snail invasions

All-male populations of the freshwater prawn Macrobrachium rosenbergii were recently produced by a novel temporal RNA interference (RNAi)-based biotechnology for aquaculture purposes. This biotechnology opens the way to the wide use of all-male prawn populations as sustainable biocontrol agents against invading populations of freshwater snails, for which there is currently no environmentally friendly solution. Among the most damaging of the invasive freshwater snail species are the apple snails (Pomacea spp.), which inflict major damage on natural ecosystems and rice fields. The proposed use of all-male prawn populations as environmentally friendly biocontrol agents against invasive freshwater snails has several advantages: efficient predation by the prawns over a wide range of freshwater snails, the ready availability of the prawns, and the monosex non-reproductive nature of the biocontrol agents. Since the aquatic predators are strongly size selective, we quantified the predation rate as a function of body size of both predator and prey (M. rosenbergii and P. caniculata). Medium-sized and large prawns (~10–30 g) efficiently preyed small and medium-sized snails (up to 15 mm), while small prawns (up to 4 g) immediately and completely eradicated snail hatchlings. Medium-sized prawns (~22 g) exterminated a significant fraction of snail biomass within 24 h (up to 58% of their body mass) after being introduced into a tank of snails. A typical ‘climbing-to-the surface’ anti-predator behavior of the snails was recorded. The potential of all-male prawns as efficient biocontrol agents over hatchling and adult apple snails as part of an integrated pest management program is discussed. Our experiments set the stage for evaluating the ecological and economic implications of this generic solution for a wide variety of habitats.     

Chromoblastomycosis due to Fonsecaea pedrosoi and F. monophora in Cuba

We report two cases of chromoblastomycosis due to Fonsecaea pedrosoi and F. monophora in otherwise healthy Cuban males. Direct microscopic examination of biopsies revealed muriform cells, the hallmark of chromoblastomycosis. The suspected agents were recovered in culture, identified on the basis of morphological criteria and confirmed by sequencing of the internal transcribed spacer regions of rDNA. Final treatment consisted of surgical excision. The patients were successfully cured since there was no relapse after a follow-up of more than a year. In vitro antifungal susceptibility testing of both isolates showed that itraconazole and posaconazole had potent activity. High MICs of amphotericin B (2 μg/ml), fluconazole (>64 μg/ml), anidulafungin (8 μg/ml) and caspofungin (8 μg/ml) were found.     

Biochemical, molecular characterization and growth promoting effects of phosphate solubilizing Pseudomonas sp. isolated from weeds grown in salt range of Pakistan

Three species of phosphate solubilizing bacteria viz, Pseudomonas mendocina Khsr2, Pseudomonas stutzeri Khsr3 and Pseudomonas putida Khsr4 were isolated from roots of weeds Lactuca dissecta D. Don, Solanum surattense Burm. f and Sonchus arvensis L. respectively growing in Khewra salt range (EC: 2.3 dS m^?1; pH 8.6). Preliminary identification of bacterial isolate was made on the basis of morphological and biochemical characters and confirmed by partial 16S-rRNA gene sequencing. The genetic diversity among the isolates was evaluated by Randomly Amplified Polymorphic DNA finger printing and similarity matrix was measured. All the Pseudomonas sp. were capable of solubilizing phosphate, produced phytohormones: Indole-3-acetic acid, Gibberellic acid, Trans-zeatin riboside and Abscisic acid in culture media and were found to be efficient in stimulating root/shoot length and dry weight and proline contents of Zea mays L (advance germplasm line: Islamabad Gold) seedlings grown under normal and NaCl (20 dS m^?1) stress. The strain Pseudomonas stutzeri Khsr3 appears to be a potential candidate as bio-inoculant for saline fields.     

Histological changes in the uterus of the hens after embryonic exposure to bisphenol A and diethylstilbestrol

Many employed chemicals in industries have estrogenic hormone effects on organisms, and these are called as environmental estrogens. Environmental estrogens have adverse effects on development and function of reproductive organs of the birds. Bisphenol A (BPA) is one of the best known environmental estrogens widely found in plastic products. In this study, we injected BPA and the synthetic estrogen diethylstilbestrol (DES) in ovo and then examined and compared the effects of those on the uteri (shell gland) of the adult hens by histological methods. Five groups have been designed in the current study. Only vehicle substance was given in ovo to the control group and BPA (67 or 134 μg/g egg) and DES (0.02 or 0.2 μg/g egg) were administered in the experimental groups. Tissue specimens were taken from uteri of hens at 21 weeks of age, prior to the laying period. Estrogen receptor alpha (ERα) was immunohistochemically stained. It was observed that the hatching proportion in BPA (67 μg and 134 μg/g) was lesser than the other groups (P?<?0.01). Uterine tubular glandular density and thickness of tunica mucosa were found to have reduced (P?<?0.01) in BPA (134 μg/g) and DES (0.2 μg/g) groups, in comparison with those of the control and the other experimental groups. Uterine gland epithelium revealed positive immunoreaction for ERα. These findings suggested that administration of BPA and DES at high doses affected embryonic development in a negative way, and this adverse effect was seen less in adult period.     

Enhancing Lipid Production from Crude Glycerol by Newly Isolated Oleaginous Yeasts: Strain Selection, Process Optimization, and Fed-Batch Strategy

High lipid-accumulating yeast Trichosporonoides spathulata was newly isolated using crude glycerol as a sole carbon source. After process optimization in a 5-L bioreactor equipped with pH control and aeration system, T. spathulata produced biomass of 11.3 g/L and lipid of 5.01 g/L with a lipid content of 44.3 % using 10 % (w/v) of crude glycerol supplemented only with 0.5 % (w/v) of ammonium sulfate. A one-stage fed-batch feeding with crude glycerol and ammonium sulfate enhanced biomass and lipid production up to 17.3 and 7.25 g/L, respectively, with a lipid content of 41.9 %, while a two-stage fed-batch feeding with only crude glycerol in the second stage led to a lower biomass of 13.8 g/L but a higher lipid production of 7.78 g/L and a higher lipid content of 56.4 %. The fatty acid composition of produced lipid that is similar to plant oil indicates the high potential use of T. spathulata lipid as biodiesel feedstocks.     

Improved glycerol to ethanol conversion by <Emphasis Type="Italic">E. coli</Emphasis> using a metagenomic fragment isolated from an anaerobic reactor

Crude glycerol obtained as a by-product of biodiesel production is a reliable feedstock with the potential to be converted into reduced chemicals with high yields. It has been previously shown that ethanol is the primary product of glycerol fermentation by Escherichia coli. However, few efforts were made to enhance this conversion by means of the expression of heterologous genes with the potential to improve glycerol transport or metabolism. In this study, a fosmid-based metagenomic library constructed from an anaerobic reactor purge sludge was screened for genetic elements that promote the use and fermentation of crude glycerol by E. coli. One clone was selected based on its improved growth rate on this feedstock. The corresponding fosmid, named G1, was fully sequenced (41 kbp long) and the gene responsible for the observed phenotype was pinpointed by in vitro insertion mutagenesis. Ethanol production from both pure and crude glycerol was evaluated using the parental G1 clone harboring the ethanologenic plasmid pLOI297 or the industrial strain LY180 complemented with G1. In mineral salts media containing 50 % (v/v) pure glycerol, ethanol concentrations increased two-fold on average when G1 was present in the cells reaching up to 20 g/L after 24 h fermentation. Similar fermentation experiments were done using crude instead of pure glycerol. With an initial OD₆₂₀ of 8.0, final ethanol concentrations after 24 h were much higher reaching 67 and 75 g/L with LY180 cells carrying the control fosmid or the G1 fosmid, respectively. This translates into a specific ethanol production rate of 0.39 g h^?1 OD^?1 L^?1.     

Microbial production of a biofuel (acetone–butanol–ethanol) in a continuous bioreactor: impact of bleed and simultaneous product removal

Acetone butanol ethanol (ABE) was produced in an integrated continuous one-stage fermentation and gas stripping product recovery system using Clostridium beijerinckii BA101 and fermentation gases (CO₂ and H₂). In this system, the bioreactor was fed with a concentrated sugar solution (250–500 g L^?1 glucose). The bioreactor was bled semi-continuously to avoid accumulation of inhibitory chemicals and products. The continuous system was operated for 504 h (21 days) after which the fermentation was intentionally terminated. The bioreactor produced 461.3 g ABE from 1,125.0 g total sugar in 1 L culture volume as compared to a control batch process in which 18.4 g ABE was produced from 47.3 g sugar. These results demonstrate that ABE fermentation can be operated in an integrated continuous one-stage fermentation and product recovery system for a long period of time, if butanol and other microbial metabolites in the bioreactor are kept below threshold of toxicity.     

Hydrothermal treatment of naturally contaminated maize in the presence of sodium metabisulfite, methylamine and calcium hydroxide; effects on the concentration of zearalenone and deoxynivalenol

Fusarium toxin-contaminated ground maize was hydrothermally treated in the presence of different combinations of chemicals in order to simultaneously reduce zearalenone (ZEA) and deoxynivalenol (DON) concentrations. Treatments were carried out in a laboratory conditioner at 80 °C and 17 % moisture. Six different treatments were performed, consisting of 3 doses of methylamine (MMA; 2.5, 5 and 10 g/kg maize) at a constant dose of 5 g sodium metabisulfite (SBS)/kg, either with or without the addition of 20 g calcium hydroxide (Ca(OH)₂)/kg. The used maize was contaminated with approximately 45.99 mg DON/kg and 3.46 mg ZEA/kg. Without the addition of Ca(OH)₂, DON reductions reached approximately 82 % after 1-min treatment and the toxin disappeared nearly completely after 10 min when 2.5 or 5 g MMA were applied. ZEA concentrations were only marginally affected. In the presence of Ca(OH)₂, reductions in DON concentrations were lower, but were enhanced by increasing doses of MMA. ZEA concentrations were reduced by 72, 85 and 95 % within the first 5 min of the treatment at MMA dosages of 2.5, 5 and 10 g/kg maize, respectively. The application of SBS in combination with a strong alkaline during hydrothermal treatment seems to be a promising approach to simultaneously decontaminate even high amounts of DON and ZEA in ground maize and may contribute to reduce the toxin load of diets     

Rapid and stable production of 2,3-butanediol by an engineered <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> strain in a continuous airlift bioreactor

Utilization of renewable feedstocks for the production of bio-based bulk chemicals, such as 2,3-butanediol (2,3-BDO), by engineered strains of the non-pathogenic yeast, Saccharomyces cerevisiae, has recently become an attractive option. In this study, to realize rapid production of 2,3-BDO, a flocculent, 2,3-BDO-producing S. cerevisiae strain YPH499/dPdAdG/BDN6-10/FLO1 was constructed from a previously developed 2,3-BDO-producing strain. Continuous 2,3-BDO fermentation was carried out by the flocculent strain in an airlift bioreactor. The strain consumed more than 90 g/L of glucose, which corresponded to 90% of the input, and stably produced more than 30 g/L of 2,3-BDO over 380 h. The maximum 2,3-BDO productivity was 7.64 g/L/h at a dilution rate of 0.200/h, which was higher than the values achieved by continuous fermentation using pathogenic bacteria in the previous reports. These results demonstrate that continuous 2,3-BDO fermentation with flocculent 2,3-BDO-producing S. cerevisiae is a promising strategy for practical 2,3-BDO production.