Heterobinary Adhesins Based on the Escherichia coli FimH Fimbrial Protein

The FimH adhesin of Escherichia coli type 1 fimbriae confers the ability to bind to d-mannosides by virtue of a receptor-binding domain located in its N-terminal region. This protein was engineered into a heterobifunctional adhesin by introducing a secondary binding site in the C-terminal region. The insertion of histidine clusters into this site resulted in coordination of various metal ions by recombinant cells expressing chimeric FimH proteins. In addition, libraries consisting of random peptide sequences inserted into the FimH display system and screened by a “panning” technique were used to identify specific sequences conferring the ability to adhere to Ni²⁺ and Cu²⁺. Recombinant cells expressing heterobifunctional FimH adhesins could adhere simultaneously to both metals and saccharides. Finally, combining the metal-binding modifications with alterations in the natural receptor-binding region demonstrated the ability to independently modulate the binding of FimH to two ligands simultaneously.

Expression systems for the display of heterologous protein segments facilitate the presentation of both defined and random peptide sequences at exposed regions of surface proteins of filamentous bacteriophage virions, bacteria, and yeasts (2, 4). We are particularly interested in the display of heterologous peptides in type 1 fimbriae. Such surface organelles are found on the majority of Escherichia coli strains and confer the ability to bind to specific surfaces. A single type 1 fimbria is a heteropolymer that is 7 nm wide and approximately 1 μm long. It consists of approximately 1,000 subunits of the major element, FimA, that are polymerized in a right-handed helical structure that also contains low levels of the minor components FimF, FimG, and FimH (9). The FimH protein has been shown to be the actual receptor-binding molecule which recognizes α-d-mannose-containing structures (10). Because of this, type 1 fimbriated bacteria readily agglutinate yeast cells (a rich source of mannan).The FimH adhesin is located at the tip of each fimbria and also is interspersed along the fimbrial shaft (6, 10). The results of linker insertion mutagenesis (16) and analyses of naturally occurring variants (17–19) and hybrid proteins constructed by fusing FimH to FocH (8) and MalE (21) suggest that the FimH protein consists of two major domains, each constituting roughly one-half of the molecule; the N-terminal domain seems to contain the receptor-binding site, while the C-terminal domain seems to contain the recognition sequences for export and bioassembly.In previous studies we investigated the ability of FimH to display heterologous peptides in connection with the development of vaccine systems. Various heterologous sequences, representing immune-relevant sectors of foreign proteins, were authentically displayed on the bacterial surface in FimH (12). These observations led us to believe that the FimH protein is an ideal candidate for display of random peptide sequences and for construction of designer adhesins (i.e., proteins manipulated to bind to targets of choice). Here we describe simultaneous heterobifunctional binding of recombinant cells expressing chimeric FimH proteins to metal and d-mannose targets.     

Chaperone-independent folding of type 1 pilus domains

An elementary step in the assembly of adhesive type 1 pili of Escherichia coli is the folding of structural pilus subunits in the periplasm. The previously determined X-ray structure of the complex between the type 1 pilus adhesin FimH and the periplasmic pilus assembly chaperone FimC has shown that FimH consists of a N-terminal lectin domain and a C-terminal pilin domain, and that FimC exclusively interacts with the pilin domain. The pilin domain fold, which is common to all pilus subunits, is characterized by an incomplete beta-sheet that is completed by a donor strand from FimC in the FimC-FimH complex. This, together with unsuccessful attempts to refold isolated, urea-denatured FimH in vitro had suggested that folding of pilin domains strictly depends on sequence information provided by FimC. We have now analyzed in detail the folding of FimH and its two isolated domains in vitro. We find that not only the lectin domain, but also the pilin domain can fold autonomously and independently of FimC. However, the thermodynamic stability of the pilin domain is very low (8-10kJmol(-1)) so that a significant fraction of the domain is unfolded even in the absence of denaturant. This explains the high tendency of structural pilus subunits to aggregate non-specifically in the absence of stoichiometric amounts of FimC. Thus, pilus chaperones prevent non-specific aggregation of pilus subunits by native state stabilization after subunit folding.     

Valency conversion in the type 1 fimbrial adhesin of Escherichia coli

FimH protein is a lectin-like adhesive subunit of type 1, or mannose-sensitive, fimbriae that are found on the surface of most Escherichia coli strains. All naturally occurring FimH variants demonstrate a conserved mannotriose-specific (i.e. multivalent) binding. Here, we demonstrate that replacement of residues 185-279 within the FimH pilin domain with a corresponding segment of the type 1C fimbrial adhesin FocH leads to a loss of the multivalent mannotriose-specific binding property accompanied by the acquisition of a distinct monomannose-specific (i.e. monovalent) binding capability. Bacteria expressing the monovalent hybrid adhesins were capable of binding strongly to uroepithelial tissue culture cells and guinea pig erythrocytes. They could not, however, agglutinate yeast or bind human buccal cells -- functions readily accomplished by the E. coli-expressing mannotriose-specific FimH variants. Based on the relative potency of inhibiting compounds of different structures, the receptor binding site within monovalent FimH-FocH adhesin has an extended structure with an overall configuration similar to that within the multivalent FimH of natural origin. The monomannose-only specific phenotype could also be invoked by a single point mutation, E89K, located within the lectin domain of FimH, but distant from the receptor binding site. The structural alterations influence the receptor-binding valency of the FimH adhesin via distal effects on the combining pocket, obviously by affecting the FimH quaternary structure.     

Characterization of FimC, a periplasmic assembly factor for biogenesis of type 1 pili in Escherichia coli

Assembly of type 1 pili from Escherichia coli is mediated by FimC, a periplasmic chaperone (assembly factor) consisting of two immunoglobulin-like domains. FimC is assumed to recognize the individual pilus subunits in the periplasm mainly via their conserved C-terminal segments and to deliver the subunits to an assembly platform in the outer membrane. Here we present the first biochemical characterization of a periplasmic pilus chaperone and analyze the importance of the two chaperone domains for stability and function. Comparison of the isolated C-terminal domain with wild-type FimC revealed a strongly reduced thermodynamic stability, indicating strong interdomain interactions. The affinity of FimC toward a peptide corresponding to the 11 C-terminal residues of the type 1 pilus adhesin FimH is at least 1000-fold lower compared to binding of intact FimH, confirming that bacterial pilus chaperones, unlike other chaperones, specifically interact with folded pilus subunits.     

Molecular cloning of the 3'' half of the Clostridium perfringens enterotoxin gene and demonstration that this region encodes receptor-binding activity.

Clostridium perfringens type A enterotoxin (CPE) causes the symptoms associated with C. perfringens food poisoning. To determine whether the C-terminal half of CPE contains receptor-binding activity, the 3' half of the cpe structural gene was cloned with an Escherichia coli expression vector system. E. coli lysates containing the expressed C-terminal CPE fragment (CPEfrag) were then assayed for CPE-like serologic, receptor-binding, and cytotoxic activities. CPEfrag was shown to contain an epitope located at or near the receptor-binding domain of the CPE molecule. Competitive-binding studies showed specific competition for CPE receptors between CPE and CPEfrag lysates. CPEfrag lysates did not cause cytotoxicity in Vero (African green monkey kidney) cells. However, preincubation with CPEfrag lysates specifically protected Vero cells from subsequent CPE challenge. This indicates that CPEfrag recognizes the physiologic receptor which mediates CPE cytotoxicity. Collectively, these studies indicate that the C-terminal half of CPE contains a receptor-binding domain but additional amino acid sequences appear to be required for CPE cytotoxicity.     

FimH-mediated autoaggregation of Escherichia coli

Autoaggregation is a phenomenon thought to contribute to colonization of mammalian hosts by pathogenic bacteria. Type 1 fimbriae are surface organelles of Escherichia coli that mediate d-mannose-sensitive binding to various host surfaces. This binding is conferred by the minor fimbrial component FimH. In this study, we have used random mutagenesis to identify variants of the FimH adhesin that confer the ability of E. coli to autoaggregate and settle from liquid cultures. Three separate autoaggregating clones were identified, all of which contained multiple amino acid changes located within the N-terminal receptor-binding domain of FimH. Autoaggregation could not be inhibited by mannose, but was inhibited by growth at temperatures at or below 30 degrees C. Using green fluorescent protein (GFP) as a reporter, we show that the autoaggregating clones do not mix with wild-type fimbriated cells. Electron microscopy shows that autoaggregating cells produce fimbriae with a twisted and entangled appearance. We present evidence that autoaggregating versions of FimH also occur in nature. Our results stress the highly adaptive nature of the ubiquitous FimH adhesin.     

Interdomain interaction in the FimH adhesin of Escherichia coli regulates the affinity to mannose

FimH is a mannose-specific adhesin located on the tip of type 1 fimbriae of Escherichia coli that is capable of mediating shear-enhanced bacterial adhesion. FimH consists of a fimbria-associated pilin domain and a mannose-binding lectin domain, with the binding pocket positioned opposite the interdomain interface. By using the yeast two-hybrid system, purified lectin and pilin domains, and docking simulations, we show here that the FimH domains interact with one another. The affinity for mannose is greatly enhanced (up to 300-fold) in FimH variants in which the interdomain interaction is disrupted by structural mutations in either the pilin or lectin domains. Also, affinity to mannose is dramatically enhanced in isolated lectin domains or in FimH complexed with the chaperone molecule that is wedged between the domains. Furthermore, FimH with native structure mediates weak binding at low shear stress but shifts to strong binding at high shear, whereas FimH with disrupted interdomain contacts (or the isolated lectin domain) mediates strong binding to mannose-coated surfaces even under low shear. We propose that interactions between lectin and pilin domains decrease the affinity of the mannose-binding pocket via an allosteric mechanism. We further suggest that mechanical force at high shear stress separates the two domains, allowing the lectin domain to switch from a low affinity to a high affinity state. This shift provides a mechanism for FimH-mediated shear-enhanced adhesion by enabling the adhesin to form catch bond-like interactions that are longer lived at high tensile force.     

Unlocking of the filamentous bacteriophage virion during infection is mediated by the C domain of pIII

Protein III (pIII) of filamentous phage is required for both the beginning and the end of the phage life cycle. The infection starts by binding of the N-terminal N2 and N1 domains to the primary and secondary host receptors, F pilus and TolA protein, respectively, whereas the life cycle terminates by the C-terminal domain-mediated release of the membrane-anchored virion from the cell. It has been assumed that the role of the C-terminal domain of pIII in the infection is that of a tether for the receptor-binding domains N1N2 to the main body of the virion. In a poorly understood process that follows receptor binding, the virion disassembles as its protein(s) become integrated into the host inner membrane, resulting in the phage genome entry into the bacterial cytoplasm. To begin revealing the mechanism of this process, we showed that tethering the functional N1N2 receptor-binding domain to the virion via termination-incompetent C domain abolishes infection. This infection defect cannot be complemented by in trans supply of the functional C domain. Therefore, the C domain of pIII acts in concert with the receptor-binding domains to mediate the post receptor binding events in the infection. Based on these findings, we propose a model in which binding of the N1 domain to the periplasmic portion of TolA, the secondary receptor, triggers in cis a conformational change in the C domain, and that this change opens or unlocks the pIII end of the virion, allowing the entry phase of infection to proceed. To our knowledge, this is the first virus that uses the same protein domain both for the insertion into and release from the host membrane.     

The tyrosine gate as a potential entropic lever in the receptor-binding site of the bacterial adhesin FimH

Uropathogenic Escherichia coli (UPEC) are the major causative agents of urinary tract infections. During infection, UPEC adhere to mannosylated glycoreceptors on the urothelium via the FimH adhesin located at the tip of type 1 pili. Synthetic FimH antiadhesives such as alkyl and phenyl α-D-mannopyranosides are thus ideal candidates for the chemical interception of this crucial step in pathogenesis. The crystal structures of the FimH lectin domain in its ligand-free form and in complexes with eight medium- and high-affinity mannopyranoside inhibitors are presented. The thermodynamic profiles of the FimH-inhibitor interactions indicate that the binding of FimH to α-D-mannopyranose is enthalpy-driven and has a negative entropic change. Addition of a hydrophobic aglycon influences the binding enthalpy and can induce a favorable entropic change. The alleviation of the entropic cost is at least in part explained by increased dynamics in the tyrosine gate (Tyr48 and Tyr137) of the FimH receptor-binding site upon binding of the ligand. Ligands with a phenyl group directly linked to the anomeric oxygen of α-D-mannose introduce the largest dynamics into the Tyr48 side chain, because conjugation with the anomeric oxygen of α-D-mannose forces the aromatic aglycon into a conformation that comes into close contact (≈2.65 ?) with Tyr48. A propargyl group in this position predetermines the orientation of the aglycon and significantly decreases affinity. FimH has the highest affinity for α-D-mannopyranosides substituted with hydrophobic aglycons that are compatible in shape and electrostatic properties to the tyrosine gate, such as heptyl α-D-mannose.     

The affinity of the FimH fimbrial adhesin is receptor-driven and quasi-independent of Escherichia coli pathotypes

Type-1 fimbriae are important virulence factors for the establishment of Escherichia coli urinary tract infections. Bacterial adhesion to the high-mannosylated uroplakin Ia glycoprotein receptors of bladder epithelium is mediated by the FimH adhesin. Previous studies have attributed differences in mannose-sensitive adhesion phenotypes between faecal and uropathogenic E. coli to sequence variation in the FimH receptor-binding domain. We find that FimH variants from uropathogenic, faecal and enterohaemorrhagic isolates express the same specificities and affinities for high-mannose structures. The only exceptions are FimHs from O157 strains that carry a mutation (Asn135Lys) in the mannose-binding pocket that abolishes all binding. A high-mannose microarray shows that all substructures are bound by FimH and that the largest oligomannose is not necessarily the best binder. Affinity measurements demonstrate a strong preference towards oligomannosides exposing Manalpha1-3Man at their non-reducing end. Binding is further enhanced by the beta1-4-linkage to GlcNAc, where binding is 100-fold better than that of alpha-d-mannose. Manalpha1-3Manbeta1-4GlcNAc, a major oligosaccharide present in the urine of alpha-mannosidosis patients, thus constitutes a well-defined FimH epitope. Differences in affinities for high-mannose structures are at least 10-fold larger than differences in numbers of adherent bacteria between faecal and uropathogenic strains. Our results imply that the carbohydrate expression profile of targeted host tissues and of natural inhibitors in urine, such as Tamm-Horsfall protein, are stronger determinants of adhesion than FimH variation.     

Distinct mechanisms of neutralization by monoclonal antibodies specific for sites in the N-terminal or C-terminal domain of murine leukemia virus SU

The epitope specificities and functional activities of monoclonal antibodies (MAbs) specific for the murine leukemia virus (MuLV) SU envelope protein subunit were determined. Neutralizing antibodies were directed towards two distinct sites in MuLV SU: one overlapping the major receptor-binding pocket in the N-terminal domain and the other involving a region that includes the most C-terminal disulfide-bonded loop. Two other groups of MAbs, reactive with distinct sites in the N-terminal domain or in the proline-rich region (PRR), did not neutralize MuLV infectivity. Only the neutralizing MAbs specific for the receptor-binding pocket were able to block binding of purified SU and MuLV virions to cells expressing the ecotropic MuLV receptor, mCAT-1. Whereas the neutralizing MAbs specific for the C-terminal domain did not interfere with the SU-mCAT-1 interaction, they efficiently inhibited cell-to-cell fusion mediated by MuLV Env, indicating that they interfered with a postattachment event necessary for fusion. The C-terminal domain MAbs displayed the highest neutralization titers and binding activities. However, the nonneutralizing PRR-specific MAbs bound to intact virions with affinities similar to those of the neutralizing receptor-binding pocket-specific MAbs, indicating that epitope exposure, while necessary, is not sufficient for viral neutralization by MAbs. These results identify two separate neutralization domains in MuLV SU and suggest a role for the C-terminal domain in a postattachment step necessary for viral fusion.     

Recognition of the N-terminal lectin domain of FimH adhesin by the usher FimD is required for type 1 pilus biogenesis

In this work we discover that a specific recognition of the N-terminal lectin domain of FimH adhesin by the usher FimD is essential for the biogenesis of type 1 pili in Escherichia coli. These filamentous organelles are assembled by the chaperone-usher pathway, in which binary complexes between fimbrial subunits and the periplasmic chaperone FimC are recognized by the outer membrane protein FimD (the usher). FimH adhesin initiates fimbriae polymerization and is the first subunit incorporated in the filament. Accordingly, FimD shows higher affinity for the FimC/FimH complex although the structural basis of this specificity is unknown. We have analysed the assembly into fimbria, and the interaction with FimD in vivo, of FimH variants in which the N-terminal lectin domain of FimH was deleted or substituted by different immunoglobulin (Ig) domains, or in which these Ig domains were fused to the N-terminus of full-length FimH. From these data, along with the analysis of a FimH mutant with a single amino acid change (G16D) in the N-terminal lectin domain, we conclude that the lectin domain of FimH is recognized by FimD usher as an essential step for type 1 pilus biogenesis.     

Specific residues in the N-terminal domain of FimH stimulate type 1 fimbriae assembly in Escherichia coli following the initial binding of the adhesin to FimD usher

Type 1 fimbriae are assembled by the chaperone–usher pathway where periplasmic protein complexes formed between fimbrial subunits and the FimC chaperone are recruited by the outer membrane protein FimD (the usher) for their ordered polymerization and export. FimH adhesin initiates and stimulates type 1 fimbriae polymerization by interacting with FimD. Previously we showed that the N-terminal lectin domain of FimH (N-FimH) is necessary for binding of the adhesin to FimD. In this work, we have selected mutants in N-FimH that reduce the levels of adhesin and type 1 fimbriae displayed in Escherichia coli without altering the levels of FimH in the periplasm. The selected mutations are mostly concentrated in residues G15, N46 and D47. In contrast to other mutations isolated that simply affect binding of FimH to FimD (e.g. C3Y), these variants associate to FimD and alter its susceptibility to trypsin digestion similarly to wild-type FimH. Importantly, their mutant phenotype is rescued when FimD is activated in vivo by the coexpression of wild-type FimH. Altogether, these data indicate that residues G15, N46 and D47 play an important role following initial binding of FimH to FimD for efficient type 1 fimbriae polymerization by this outer membrane usher.     

The complete receptor-binding domain of Clostridium difficile toxin A is required for endocytosis

Clostridium difficile toxin A, the chief pathogenicity factor of the antibiotic-associated pseudomembranous colitis, is an intracellular acting cytotoxin that reaches its targets, the Rho GTPases, after receptor-mediated endocytosis. The C-terminal part, constructed of repetitive peptide elements, is thought to bind to a lot of carbohydrate containing receptor molecules to induce clustering and endocytosis. To study which part of the receptor-binding domain is in charge of addressing toxin A into the target cells, we studied the functional, i.e., endocytosis-inducing, binding of toxin A. By a competition assay between various receptor-binding fragments of toxin A and the holotoxin A we found that the complete receptor-binding domain, encompassing the entire repetitive elements, but not parts of it, is necessary for binding-induced endocytosis. The receptor binding domain itself shows weaker competition with holotoxin A than the fragment consisting of receptor-binding domain plus intermediary part of the toxin. All toxin A fragments that compete with holotoxin A are capable of inducing their own endocytosis. Thus, the entire receptor-binding domain, covering the C-terminal third of the toxin A molecule, is responsible for cell uptake of toxin A and the intermediary part contributes to the correct folding and assembly of the repetitive domains.     

不同血清型肉毒毒素受体结合域研究进展

肉毒毒素(botulinum neurotoxin, BoNT)是人类已知毒性最强的蛋白质之一,可以引起肌肉松弛麻痹,严重时可导致死亡。肉毒毒素共分为7种血清型(BoNT/A-BoNT/G),根据氨基酸序列差异可进一步分为40多种亚型。肉毒毒素分子结构由3个基本结构域组成：重链羧基端细胞受体结合域、氨基端的易位域和轻链催化域。在运动神经元表面,受体结合域首先与聚唾液酸神经节苷脂结合,随后与突触囊泡蛋白2或突触囊泡结合蛋白结合形成双受体复合物。每种血清型的受体结合域都必须与其相应受体结合才能发挥作用。肉毒毒素的结构功能及其对宿主的作用一直都是研究热点。近年来,因受体结合域可以促进肉毒毒素与运动神经元膜特异性结合,而成为新的研究方向。本综述将概述不同血清型肉毒毒素与受体结合过程中受体结合域结构变化和结合位点差异。通过分析不同血清型及亚型的序列以及受体结合域结构特征,可以更好地了解细胞受体结合域的序列差异和功能,并为肉毒毒素的治疗策略提供新思路。     

Recombinant FimH Adhesin Demonstrates How the Allosteric Catch Bond Mechanism Can Support Fast and Strong Bacterial Attachment in the Absence of Shear

The FimH protein of Escherichia coli is a model two-domain adhesin that is able to mediate an allosteric catch bond mechanism of bacterial cell attachment, where the mannose-binding lectin domain switches from an ‘inactive’ conformation with fast binding to mannose to an ‘active’ conformation with slow detachment from mannose. Because mechanical tensile force favors separation of the domains and, thus, FimH activation, it has been thought that the catch bonds can only be manifested in a fluidic shear-dependent mode of adhesion. Here, we used recombinant FimH variants with a weakened inter-domain interaction and show that a fast and sustained allosteric activation of FimH can also occur under static, non-shear conditions. Moreover, it appears that lectin domain conformational activation happens intrinsically at a constant rate, independently from its ability to interact with the pilin domain or mannose. However, the latter two factors control the rate of FimH deactivation. Thus, the allosteric catch bond mechanism can be a much broader phenomenon involved in both fast and strong cell-pathogen attachments under a broad range of hydrodynamic conditions. This concept that allostery can enable more effective receptor-ligand interactions is fundamentally different from the conventional wisdom that allostery provides a mechanism to turn binding off under specific conditions.     

Bordetella dermonecrotic toxin undergoes proteolytic processing to be translocated from a dynamin-related endosome into the cytoplasm in an acidification-independent manner

Bordetella pertussis dermonecrotic toxin (DNT), which activates intracellular Rho GTPases, is a single chain polypeptide composed of an N-terminal receptor-binding domain and a C-terminal enzymatic domain. We found that DNT was cleaved by furin, a mammalian endoprotease, on the C-terminal side of Arg(44), which generates an N-terminal fragment almost corresponding to the receptor-binding domain and a C-terminal remainder (deltaB) containing the enzymatic domain. These two fragments remained associated even after the cleavage and made a nicked form. DNT mutants insensitive to furin had no cellular effect, whereas the nicked toxin was much more potent than the intact form, indicating that the nicking by furin was a prerequisite for action. DeltaB, but not the nicked toxin, associated with artificial liposomes and activated Rho in cells resistant to DNT because of a lack of surface receptor. These results imply that deltaB, dissociated from the binding domain, fully possesses the ability to enter the cytoplasm across the lipid bilayer membrane. The translocation ability of deltaB was found to be attributable to the N-terminal region encompassing amino acids 45-166, including a putative transmembrane domain. Pharmacological analyses with various reagents disturbing vesicular trafficking revealed that the translocation requires neither the acidification of the endosomes nor retrograde vesicular transport to deeper organelles, although DNT appeared to be internalized via a dynamin-dependent endocytosis. We conclude that DNT binds to its receptor and is internalized into endosomes where the proteolytic processing occurs. DeltaB, liberated from the binding domain after the processing, begins to translocate the enzymatic domain into the cytoplasm.     

Sticky socks: Helicobacter pylori VacA takes shape

Several receptors have been described for the Helicobacter pylori vacuolating toxin VacA, which exerts different effects on epithelial cells and on immune cells. The crystal structure of the putative receptor-binding domain of VacA (p55) has now been solved. It consists of a parallel beta-helix with a C-terminal globular domain. A comparison between allelic variants of p55 and docking of the p55 domain into the quaternary structure, as shown by electron microscopy, revealed structural features that might be important for elucidating the molecular details of receptor interaction and channel formation.     

Integrin-like allosteric properties of the catch bond-forming FimH adhesin of Escherichia coli

FimH is the adhesive subunit of type 1 fimbriae of the Escherichia coli that is composed of a mannose-binding lectin domain and a fimbria-incorporating pilin domain. FimH is able to interact with mannosylated surface via a shear-enhanced catch bond mechanism. We show that the FimH lectin domain possesses a ligand-induced binding site (LIBS), a type of allosterically regulated epitopes characterized in integrins. Analogous to integrins, in FimH the LIBS epitope becomes exposed in the presence of the ligand (or "activating" mutations) and is located far from the ligand-binding site, close to the interdomain interface. Also, the antibody binding to the LIBS shifts adhesin from the low to high affinity state. Binding of streptavidin to the biotinylated residue within the LIBS also locks FimH in the high affinity state, suggesting that the allosteric perturbations in FimH are sustained by the interdomain wedging. In the presence of antibodies, the strength of bacterial adhesion to mannose is increased similar to the increase observed under shear force, suggesting the same allosteric mechanism, a shift in the interdomain configuration. Thus, an integrin-like allosteric link between the binding pocket and the interdomain conformation can serve as the basis for the catch bond property of FimH and, possibly, other adhesive proteins.     

RMSD analysis of structures of the bacterial protein FimH identifies five conformations of its lectin domain

FimH is a bacterial adhesin protein located at the tip of Escherichia coli fimbria that functions to adhere bacteria to host cells. Thus, FimH is a critical factor in bacterial infections such as urinary tract infections and is of interest in drug development. It is also involved in vaccine development and as a model for understanding shear-enhanced catch bond cell adhesion. To date, over 60 structures have been deposited in the Protein Data Bank showing interactions between FimH and mannose ligands, potential inhibitors, and other fimbrial proteins. In addition to providing insights about ligand recognition and fimbrial assembly, these structures provide insights into conformational changes in the two domains of FimH that are critical for its function. To gain further insights into these structural changes, we have superposed FimH's mannose binding lectin domain in all these structures and categorized the structures into five groups of lectin domain conformers using RMSD as a metric. Many structures also include the pilin domain, which anchors FimH to the fimbriae and regulates the conformation and function of the lectin domain. For these structures, we have also compared the relative orientations of the two domains. These structural analyses enhance our understanding of the conformational changes associated with FimH ligand binding and domain-domain interactions, including its catch bond behavior through allosteric action of force in bacterial adhesion.