Profile of the disulfide bonds in acetylcholinesterase

The inter- and intrasubunit disulfide bridges for the 11 S form of acetylcholinesterase isolated from Torpedo californica have been identified. Localized within the basal lamina of the synapse, the dimensionally asymmetric forms of acetylcholinesterase contain either two (13 S) or three (17 S) sets of catalytic subunits linked to collagenous and noncollagenous structural subunits. Limited proteolysis of these molecules yields a tetramer of catalytic subunits that sediments at 11 S. Each catalytic subunit contains 8 cysteine residues which were identified following tryptic digestion of the reduced, 14C-carboxymethylated protein. The tryptic peptides were purified by gel filtration followed by reverse-phase high performance liquid chromatography (HPLC) and then sequenced. The disulfide bonding profile was determined by treating the native, nonreduced 11 S form of acetylcholinesterase with a fluorescent, sulfhydryl-specific reagent, monobromobimane, prior to tryptic digestion. Peptides again were resolved by gel filtration and reverse-phase HPLC. One fluorescent cysteine-containing peptide was identified, indicating that a single sulfhydryl residue, Cys231, was present in its reduced form. Three pairs of disulfide-bonded peptides were identified. These were localized in the polypeptide chain based on the cDNA-deduced sequence of the protein and were identified as Cys67-Cys94, Cys254-Cys265, and Cys402-Cys521. Hence, three loops are found in the secondary structure. Cys572, located in the carboxyl-terminal tryptic peptide, was disulfide-bonded to an identical peptide and most likely forms an intersubunit cross-link. Since the 6 cysteine residues in acetylcholinesterase that are involved in intrachain disulfide bonds are conserved in the sequence of the homologous protein thyroglobulin, it is likely that both proteins share a common folding pattern in their respective tertiary structures. Cys231 and the carboxyl-terminal cysteine residue Cys572 are not conserved in thyroglobulin.     

Coiled coils at the edge of configurational heterogeneity. Structural analyses of parallel and antiparallel homotetrameric coiled coils reveal configurational sensitivity to a single solvent-exposed amino acid substitution

A detailed understanding of the mechanisms by which particular amino acid sequences can give rise to more than one folded structure, such as for proteins that undergo large conformational changes or misfolding, is a long-standing objective of protein chemistry. Here, we describe the crystal structures of a single coiled-coil peptide in distinct parallel and antiparallel tetrameric configurations and further describe the parallel or antiparallel crystal structures of several related peptide sequences; the antiparallel tetrameric assemblies represent the first crystal structures of GCN4-derived peptides exhibiting such a configuration. Intriguingly, substitution of a single solvent-exposed residue enabled the parallel coiled-coil tetramer GCN4-pLI to populate the antiparallel configuration, suggesting that the two configurations are close enough in energy for subtle sequence changes to have important structural consequences. We present a structural analysis of the small changes to the helix register and side-chain conformations that accommodate the two configurations and have supplemented these results using solution studies and a molecular dynamics energetic analysis using a replica exchange methodology. Considering the previous examples of structural nonspecificity in coiled-coil peptides, the findings reported here not only emphasize the predisposition of the coiled-coil motif to adopt multiple configurations but also call attention to the associated risk that observed crytstal structures may not represent the only (or even the major) species present in solution.     

Formation and carbon monoxide‐dependent dissociation of Allochromatium vinosum cytochrome c′ oligomers using domain‐swapped dimers

The number of artificial protein supramolecules has been increasing; however, control of protein oligomer formation remains challenging. Cytochrome c′ from Allochromatium vinosum (AVCP) is a homodimeric protein in its native form, where its protomer exhibits a four‐helix bundle structure containing a covalently bound five‐coordinate heme as a gas binding site. AVCP exhibits a unique reversible dimer–monomer transition according to the absence and presence of CO. Herein, domain‐swapped dimeric AVCP was constructed and utilized to form a tetramer and high‐order oligomers. The X‐ray crystal structure of oxidized tetrameric AVCP consisted of two monomer subunits and one domain‐swapped dimer subunit, which exchanged the region containing helices αA and αB between protomers. The active site structures of the domain‐swapped dimer subunit and monomer subunits in the tetramer were similar to those of the monomer subunits in the native dimer. The subunit–subunit interactions at the interfaces of the domain‐swapped dimer and monomer subunits in the tetramer were also similar to the subunit–subunit interaction in the native dimer. Reduced tetrameric AVCP dissociated to a domain‐swapped dimer and two monomers upon CO binding. Without monomers, the domain‐swapped dimers formed tetramers, hexamers, and higher‐order oligomers in the absence of CO, whereas the oligomers dissociated to domain‐swapped dimers in the presence of CO, demonstrating that the domain‐swapped dimer maintains the CO‐induced subunit dissociation behavior of native ACVP. These results suggest that protein oligomer formation may be controlled by utilizing domain swapping for a dimer–monomer transition protein.     

Conformational transition between four and five-stranded phenylalanine zippers determined by a local packing interaction

Alpha-helical coiled coils play a crucial role in mediating specific protein-protein interactions. However, the rules and mechanisms that govern helix-helix association in coiled coils remain incompletely understood. Here we have engineered a seven heptad "Phe-zipper" protein (Phe-14) with phenylalanine residues at all 14 hydrophobic a and d positions, and generated a further variant (Phe-14(M)) in which a single core Phe residue is substituted with Met. Phe-14 forms a discrete alpha-helical pentamer in aqueous solution, while Phe-14(M) folds into a tetrameric helical structure. X-ray crystal structures reveal that in both the tetramer and the pentamer the a and d side-chains interlock in a classical knobs-into-holes packing to produce parallel coiled-coil structures enclosing large tubular cavities. However, the presence of the Met residue in the apolar interface of the tetramer markedly alters its local coiled-coil conformation and superhelical geometry. Thus, short-range interactions involving the Met side-chain serve to preferentially select for tetramer formation, either by inhibiting a nucleation step essential for pentamer folding or by abrogating an intermediate required to form the pentamer. Although specific trigger sequences have not been clearly identified in dimeric coiled coils, higher-order coiled coils, as well as other oligomeric multi-protein complexes, may require such sequences to nucleate and direct their assembly.     

Construction of molecular assemblies via docking: modeling of tetramers with D2 symmetry

Comparative modeling methods are commonly used to construct models of homologous proteins or oligomers. However, comparative modeling may be inapplicable when the number of subunits in a modeled oligomer is different than in the modeling template. Thus, a dimer cannot be a template for a tetramer because a new monomer-monomer interface must be predicted. We present in this study a new prediction approach, which combines protein-protein docking with either of two tetramer-forming algorithms designed to predict the structures of tetramers with D2 symmetry. Both algorithms impose symmetry constraints. However, one of them requires identification of two of the C2 dimers within the tetramer in the docking step, whereas the other, less demanding algorithm, requires identification of only one such dimer. Starting from the structure of one subunit, the procedures successfully reconstructed 16 known D2 tetramers, which crystallize with either a monomer, a dimer or a tetramer in the asymmetric unit. In some cases we obtained clusters of native-like tetramers that differ in the relative rotation of the two identical dimers within the tetramer. The predicted structural pliability for concanavalin-A, phosphofructokinase, and fructose-1,6-bisphosphatase agrees semiquantitatively with the observed differences between the several experimental structures of these tetramers. Hence, our procedure identifies a structural soft-mode that allows regulation via relative rigid-body movements of the dimers within these tetramers. The algorithm also predicted three nearly correct tetramers from model structures of single subunits, which were constructed by comparative modeling from subunits of homologous tetrameric, dimeric, or hexameric systems.     

Folding of Tetrameric p53: Oligomerization and Tumorigenic Mutations Induce Misfolding and Loss of Function

The physiologically active form of p53 consists of a tetramer of four identical 393-amino-acid subunits associated via their tetramerization domains (TDs; residues 325-355). One in two human tumors contains a point mutation in the DNA binding domain (DBD) of p53 (residues 94-312). Most existing studies on the effects of these mutations on p53 structure and function have been carried out on the isolated DBD fragment, which is monomeric. Recent structural evidence, however, suggests that DBDs may interact with each other in full-length tetrameric forms of p53. Here, we investigate the effects of tumorigenic DBD mutations on the folding of p53 in its tetrameric form. We employ the construct consisting of DBD and TD (amino acids 94-360). We characterize the stability and conformational state of the tumorigenic DBD mutants R248Q, R249S, and R282Q using equilibrium denaturation and functional assays. Destabilizing mutations cause DBD to misfold when it is part of the p53 tetramer, but not when it is monomeric. This conformation is populated under moderately destabilizing conditions (10 °C in 2 M urea, and at physiological temperature in the absence of denaturant). Under those same conditions, it is not present in the isolated DBD fragment or in the presence of the TD mutation L344P, which abolishes tetramerization. Misfolding appears to involve intramolecular DBD-DBD association within a single tetrameric molecule. This association is promoted by destabilization of DBD (caused by mutation or elevated temperature) and by the high local DBD concentration enforced by tetramerization of TD. Disrupting the nonnative DBD-DBD interaction or transiently inhibiting tetramerization and allowing p53 to fold as a monomer may be potential strategies for pharmacological intervention in cancer.     

Molecular structure of elongated forms of electric eel acetylcholinesterase.

Molecular forms of acetylcholinesterase extracted from fresh electric organ tissue of the electric eel are elongated structures in which a multi-subunit head is connected to a fibrous tail. The principal form, 18 S acetylcholinesterase, is of molecular weight approximately 1,050,000, contains about 12 catalytic subunits in its head, has a tail approximately 500 Å long, and aggregates reversibly at low ionic strength. Trypsin converts it to an 11 S globular tetramer devoid of the tail and lacking the capacity to aggregate in low-salt solutions.Amino acid analysis shows that elongated forms of acetylcholinesterase contain significant amounts of hydroxyproline and hydroxylysine, characteristic components of collagen, which are absent from 11 S acetylcholinesterase.Collagenase converts 18 S acetylcholinesterase to a 20 S form which no longer aggregates in low salt. Purified 20 S acetylcholinesterase has about half the hydroxyproline and hydroxylysine contents of the 18 S enzyme, and physicochemical measurements indicate the formation of a more symmetrical molecular structure without marked reduction in molecular weight.Sodium dodecyl sulfate/polyacrylamide gel electrophoresis without reducing agent shows that in 18 S acetylcholinesterase half the catalytic subunits are present as dimers linked by disulfide bonds. The remaining subunits migrate as larger molecular species which contain significant amounts of hydroxylysine, are specifically modified by collagenase and are converted to dimers and monomers by trypsin.Sodium dodecyl sulfate/acrylamide gel electrophoresis with reducing agent reveals, in 18 S acetylcholinesterase, two polypeptides of molecular weights 45,000 and 47,000 which are absent in the 11 S tetramer. They are readily digested by collagenase under conditions which do not affect the catalytic subunits, with concomitant formation of a new 30,000 polypeptide.The above data can be rationalized by a model in which 18 S acetylcholinestorase contains three subunit tetramers, each linked by disulfides to one strand of a collagen triple helix. Sodium dodecyl sulfate detaches those subunit dimers which are not covalently linked to the tail; trypsin attacks the distal portion of the collagen triple helix releasing discrete tetramers, and collagenase specifically attacks the triple helix near its midpoint, producing a shortened structure in which the residual tail still holds the tetramers together, but destroying the capacity for self-association at low ionic strength. This latter property may be related to the postulated role of the tail in anchoring acetylcholinesterase to the fibrillar matrix of the basement membrane.     

1.2 Å X-ray Structure of the Renal Potassium Channel Kv1.3 T1 Domain

Here we present the structure of the T1 domain derived from the voltage-dependent potassium channel K_v1.3 of Homo sapiens sapiens at 1.2 Å resolution crystallized under near-physiological conditions. The crystals were grown without precipitant in 150 mM KP_i, pH 6.25. The crystals show I4 symmetry typical of the natural occurring tetrameric assembly of the single subunits. The obtained structural model is based on the highest resolution currently achieved for tetramerization domains of voltage-gated potassium channels. We identified an identical fold of the monomer but inside the tetramer the single monomers show a significant rotation which leads to a different orientation of the tetramer compared to other known structures. Such a rotational movement inside the tetrameric assembly might influence the gating properties of the channel. In addition we see two distinct side chain configurations for amino acids located in the top layer proximal to the membrane (Tyr109, Arg116, Ser129, Glu140, Met142, Arg146), and amino acids in the bottom layer of the T1-domain distal from the membrane (Val55, Ile56, Leu77, Arg86). The relative populations of these two states are ranging from 50:50 for Val55, Tyr109, Arg116, Ser129, Glu140, 60:40 for Met142, 65:35 for Arg86, 70:30 for Arg146, and 80:20 for Ile56 and Leu77. The data suggest that in solution these amino acids are involved in an equilibrium of conformational states that may be coupled to the functional states of the whole potassium channel.     

Tetrameric mouse acetylcholinesterase: continuum diffusion rate calculations by solving the steady-state Smoluchowski equation using finite element methods

The tetramer is the most important form for acetylcholinesterase in physiological conditions, i.e., in the neuromuscular junction and the nervous system. It is important to study the diffusion of acetylcholine to the active sites of the tetrameric enzyme to understand the overall signal transduction process in these cellular components. Crystallographic studies revealed two different forms of tetramers, suggesting a flexible tetramer model for acetylcholinesterase. Using a recently developed finite element solver for the steady-state Smoluchowski equation, we have calculated the reaction rate for three mouse acetylcholinesterase tetramers using these two crystal structures and an intermediate structure as templates. Our results show that the reaction rates differ for different individual active sites in the compact tetramer crystal structure, and the rates are similar for different individual active sites in the other crystal structure and the intermediate structure. In the limit of zero salt, the reaction rates per active site for the tetramers are the same as that for the monomer, whereas at higher ionic strength, the rates per active site for the tetramers are approximately 67%-75% of the rate for the monomer. By analyzing the effect of electrostatic forces on ACh diffusion, we find that electrostatic forces play an even more important role for the tetramers than for the monomer. This study also shows that the finite element solver is well suited for solving the diffusion problem within complicated geometries.     

Primary structures of the catalytic subunits from two molecular forms of acetylcholinesterase. A comparison of NH2-terminal and active center sequences

Two distinct classes of acetylcholinesterase exist in near equal amounts in the electric organ of Torpedo californica. A globular 5.6 S form is a dimer which possesses a hydrophobic region. The second form is present as elongated species that sediment at 17 and 13 S and contain structural subunits disulfide-linked to the catalytic subunits. Removal of the structural subunits by mild proteolysis yields a tetramer of catalytic subunits which sediments at 11 S. To compare the primary structures of the catalytic subunits of the 5.6 S and 11 S forms of acetylcholinesterase, amino acid sequences from the active sites and from the amino-terminal regions have been elucidated. Active site serines were labeled with [3H]isopropyl fluorophosphate. After digestion with trypsin, the resultant peptides were resolved by elution from a size-exclusion column followed by reverse-phase high performance liquid chromatography. Each active site tryptic peptide contained 24 residues and identical sequences were found in this peptide for the 5.6 S and 11 S forms of the enzyme. The sequence flanking the active site serine revealed extensive homology with the published sequence of human serum cholinesterase as well as a lesser degree of homology with other known serine proteases and esterases. The sequences of the amino-terminal region also appear to be identical for both enzyme forms although we note variation in the ratio of Glu and Gln at position 5. The amino-terminal sequence exhibits only partial homology with the published sequence of human serum cholinesterase.     

5-methyltetrahydrofolate is bound in intersubunit areas of rat liver folate-binding protein glycine N-methyltransferase

Glycine N-methyltransferase (GNMT) is a key regulatory enzyme in methyl group metabolism. It is abundant in the liver, where it uses excess S-adenosylmethionine (AdoMet) to methylate glycine to N-methylglycine (sarcosine) and produces S-adenosylhomocysteine (AdoHcy), thereby controlling the methylating potential of the cell. GNMT also links utilization of preformed methyl groups, in the form of methionine, to their de novo synthesis, because it is inhibited by a specific form of folate, 5-methyltetrahydrofolate. Although the structure of the enzyme has been elucidated by x-ray crystallography of the apoenzyme and in the presence of the substrate, the location of the folate inhibitor in the tetrameric structure has not been identified. We report here for the first time the crystal structure of rat GNMT complexed with 5-methyltetrahydrofolate. In the GNMT-folate complex, two folate binding sites were located in the intersubunit areas of the tetramer. Each folate binding site is formed primarily by two 1-7 N-terminal regions of one pair of subunits and two 205-218 regions of the other pair of subunits. Both the pteridine and p-aminobenzoyl rings are located in the hydrophobic cavities formed by Tyr5, Leu207, and Met215 residues of all subunits. Binding experiments in solution also confirm that one GNMT tetramer binds two folate molecules. For the enzymatic reaction to take place, the N-terminal fragments of GNMT must have a significant degree of conformational freedom to provide access to the active sites. The presence of the folate in this position provides a mechanism for its inhibition.     

The three-dimensional structure of bovine platelet factor 4 at 3.0-A resolution

Platelet factor 4 (PF4), which is released by platelets during coagulation, binds very tightly to negatively charged oligosaccharides such as heparin. To date, six other proteins are known that are homologous in sequence with PF4 but have quite different functions. The structure of a tetramer of bovine PF4 complexed with one Ni(CN)4(2-) molecule has been determined at 3.0 A resolution and refined to an R factor of 0.28. The current model contains residues 24-85, no solvent, and one overall temperature factor. Residues 1-13, which carried an oligosaccharide chain, were removed with elastase to induce crystallization; residues 14-23 and presumably 86-88 are disordered in the electron density map. Because no heavy atom derivative was isomorphous with the native crystals, the complex of PF4 with one Ni(CN)4(2-) molecule was solved using a single, highly isomorphous Pt(CN)4(2-) derivative and the iterative, single isomorphous replacement method. The secondary structure of the PF4 subunit, from amino- to carboxyl-terminal end, consists of an extended loop, three strands of antiparallel beta-sheet arranged in a Greek key, and one alpha-helix. The tetramer contains two extended, six-stranded beta-sheets, each formed by two subunits, which are arranged back-to-back to form a "beta-bilayer" structure with two buried salt bridges sandwiched in the middle. The carboxyl-terminal alpha-helices, which contain lysine residues that are thought to be intimately involved in binding heparin, are arranged as antiparallel pairs on the surface of each extended beta-sheet.     

Exploring models of the influenza A M2 channel: MD simulations in a phospholipid bilayer

The M2 protein of influenza A virus forms homotetrameric helix bundles, which function as proton-selective channels. The native form of the protein is 97 residues long, although peptides representing the transmembrane section display ion channel activity, which (like the native channel) is blocked by the antiviral drug amantadine. As a small ion channel, M2 may provide useful insights into more complex channel systems. Models of tetrameric bundles of helices containing either 18 or 22 residues have been simulated while embedded in a fully hydrated 1-palmitoyl-2-oleoyl-sn-glycerol-3-phosphatidylcholine bilayer. Several different starting models have been used. These suggest that the simulation results, at least on a nanosecond time scale, are sensitive to the exact starting structure. Electrostatics calculations carried out on a ring of four ionizable aspartate residues at the N-terminal mouth of the channel suggest that at any one time, only one will be in a charged state. Helix bundle models were mostly stable over the duration of the simulation, and their helices remained tilted relative to the bilayer normal. The M2 helix bundles form closed channels that undergo breathing motions, alternating between a tetramer and a dimer-of-dimers structure. Under these conditions either the channel forms a pocket of trapped waters or it contains a column of waters broken predominantly at the C-terminal mouth of the pore. These waters exhibit restricted motion in the pore and are effectively "frozen" in a way similar to those seen in previous simulations of a proton channel formed by a four-helix bundle of a synthetic leucine-serine peptide (, Biophys. J. 77:2400-2410).     

Brownian dynamics simulations of glycolytic enzyme subsets with F-actin

Previous Brownian dynamics (BD) simulations identified specific basic residues on fructose-1,6-bisphophate aldolase (aldolase) (I. V. Ouporov et al., Biophysical Journal, 1999, Vol. 76, pp. 17-27) and glyceraldehyde-3-phosphate dehydrogenase (GAPDH) (I. V. Ouporov et al., Journal of Molecular Recognition, 2001, Vol. 14, pp. 29-41) involved in binding F-actin, and suggested that the quaternary structure of the enzymes may be important. Herein, BD simulations of F-actin binding by enzyme dimers or peptides matching particular sequences of the enzyme and the intact enzyme triose phosphate isomerase (TIM) are compared. BD confirms the experimental observation that TIM has little affinity for F-actin. For aldolase, the critical residues identified by BD are found in surface grooves, formed by subunits A/D and B/C, where they face like residues of the neighboring subunit enhancing their electrostatic potentials. BD simulations between F-actin and aldolase A/D dimers give results similar to the native tetramer. Aldolase A/B dimers form complexes involving residues that are buried in the native structure and are energetically weaker; these results support the importance of quaternary structure for aldolase. GAPDH, however, placed the critical residues on the corners of the tetramer so there is no enhancement of the electrostatic potential between the subunits. Simulations using GAPDH dimers composed of either S/H or G/H subunits show reduced binding energetics compared to the tetramer, but for both dimers, the sets of residues involved in binding are similar to those found for the native tetramer. BD simulations using either aldolase or GAPDH peptides that bind F-actin experimentally show complex formation. The GAPDH peptide bound to the same F-actin domain as did the intact tetramer; however, unlike the tetramer, the aldolase peptide lacked specificity for binding a single F-actin domain.     

Topological and functional characterization of the N-glycans of soybean (Glycine max) agglutinin.

Soybean agglutinin (SBA), is a noncovalently bound tetramer comprised of four identical subunits having a single N-glycan chain, Man9GlcNAc2, that is known to be essential for regeneration of the functional tetrameric structure from unfolded subunits. In this study, SBA was found to have strong affinity for concanavalin A, indicating that the N-glycans are extensively solvent-exposed. The susceptibilities of the N-glycans to alpha-mannosidase and endo-beta-N-acetylglucosaminidase revealed that their distal areas have nonreducing ends embedded among the subunits, whereas their proximal regions are solvent-exposed. Endo-beta-N-acetylglucosaminidase-digested SBA was unable to retain its conformation and gradually unfolded. Periodate-oxidized SBA, whose N-glycans closely correspond to the invariant pentasaccharide core, tended to dissociate into the subunits, but permitted to stay as folded monomers. This SBA species was capable of refolding from unfolded subunits but unable to form the functional tetramer. It seems probable that the proximal regions of the N-glycans function in the formation and stabilization of the subunit conformation, whereas the branches outside the invariant cores stabilize the tetrameric structure.     

Structural basis for catalytic activation of a serine recombinase

Sin resolvase is a site-specific serine recombinase that is normally controlled by a complex regulatory mechanism. A single mutation, Q115R, allows the enzyme to bypass the entire regulatory apparatus, such that no accessory proteins or DNA sites are required. Here, we present a 1.86 ? crystal structure of the Sin Q115R catalytic domain, in a tetrameric arrangement stabilized by an interaction between Arg115 residues on neighboring subunits. The subunits have undergone significant conformational changes from the inactive dimeric state previously reported. The structure provides a new high-resolution view of a serine recombinase active site that is apparently fully assembled, suggesting roles for the conserved active site residues. The structure also suggests how the dimer-tetramer transition is coupled to assembly of the active site. The tetramer is captured in a different rotational substate than that seen in previous hyperactive serine recombinase structures, and unbroken crossover site DNA can be readily modeled into its active sites.     

Comparative studies on the structure and stability of fluorescent proteins EGFP, zFP506, mRFP1, "dimer2", and DsRed1

To obtain more information about the structural properties and conformational stabilities of GFP-like fluorescent proteins, we have undertaken a systematic analysis of series of green and red fluorescent proteins with different association states. The list of studied proteins includes EGFP (green monomer), zFP506 (green tetramer), mRFP1 (red monomer), "dimer2" (red dimer), and DsRed1 (red tetramer). Fluorescent and absorbance parameters, near-UV and visible CD spectra, the accessibility of the chromophores and tryptophans to acrylamide quenching, and the resistance of these proteins to the guanidine hydrochloride unfolding and kinetics of the approaching of the unfolding equilibrium have been compared. Tetrameric zFP506 was shown to be dramatically more stable than the EGFP monomer, assuming that association might contribute to the protein conformational stability. This assumption is most likely valid even though the sequences OF GFP and zPF506 are only approximately 25% identical. Interestingly, red FPs possessed comparable conformational stabilities, where monomeric mRFP1 was the most stable species under the equilibrium conditions, whereas the tetrameric DsRed1 possessed the slowest unfolding kinetics. Furthermore, EGFP is shown to be considerably less stable than mRFP1, whereas tetrameric zFP506 is the most stable species analyzed in this study. This means that the quaternary structure, being an important stabilizing factor, does not represent the only circumstance dictating the dramatic variations between fluorescent proteins in their conformational stabilities.     

Biosynthesis of soluble carnitine acetyltransferases from the yeast Candida tropicalis.

Soluble carnitine acetyltransferase from Candida tropicalis is synthesized as a 76 kDa precursor, which is monomeric and possesses no or very little carnitine acetyltransferase activity. Maturation of the enzyme begins with proteolytic processing of the 76 kDa precursor to 64 and 57 kDa subunits. The processed subunits subsequently associate into two kinds of active oligomers; the 57 kDa subunits are assembled into a tetramer and the 64 kDa subunits into an octamer. Formation of these oligomers depends apparently on growth conditions, since both oligomers were present in cells grown in continuous culture, but cells grown batchwise contained only the tetrameric form of carnitine acetyltransferase.     

Crystal structure of the tetrameric inositol 1-phosphate phosphatase (TM1415) from the hyperthermophile, Thermotoga maritima

The structure of the first tetrameric inositol monophosphatase (IMPase) has been solved. This enzyme, from the eubacterium Thermotoga maritima, similarly to its archaeal homologs exhibits dual specificity with both IMPase and fructose-1,6-bisphosphatase activities. The tetrameric structure of this unregulated enzyme is similar, in its quaternary assembly, to the allosterically regulated tetramer of fructose-1,6-bisphosphatase. The individual dimers are similar to the human IMPase. Additionally, the structures of two crystal forms of IMPase show significant differences. In the first crystal form, the tetrameric structure is symmetrical, with the active site loop in each subunit folded into a beta-hairpin conformation. The second form is asymmetrical and shows an unusual structural change. Two of the subunits have the active site loop folded into a beta-hairpin structure, whereas in the remaining two subunits the same loop adopts an alpha-helical conformation.     

Enzymatic Activity versus Structural Dynamics: The Case of Acetylcholinesterase Tetramer

The function of many proteins, such as enzymes, is modulated by structural fluctuations. This is especially the case in gated diffusion-controlled reactions (where the rates of the initial diffusional encounter and of structural fluctuations determine the overall rate of the reaction) and in oligomeric proteins (where function often requires a coordinated movement of individual subunits). A classic example of a diffusion-controlled biological reaction catalyzed by an oligomeric enzyme is the hydrolysis of synaptic acetylcholine (ACh) by tetrameric acetylcholinesterase (AChEt). Despite decades of efforts, the extent to which enzymatic efficiency of AChEt (or any other enzyme) is modulated by flexibility is not fully determined. This article attempts to determine the correlation between the dynamics of AChEt and the rate of reaction between AChEt and ACh. We employed equilibrium and nonequilibrium electro-diffusion models to compute rate coefficients for an ensemble of structures generated by molecular dynamics simulation. We found that, for the static initial model, the average reaction rate per active site is ∼22-30% slower in the tetramer than in the monomer. However, this effect of tetramerization is modulated by the intersubunit motions in the tetramer such that a complex interplay of steric and electrostatic effects either guides or blocks the substrate into or from each of the four active sites. As a result, the rate per active site calculated for some of the tetramer structures is only ∼15% smaller than the rate in the monomer. We conclude that structural dynamics minimizes the adverse effect of tetramerization, allowing the enzyme to maintain similar enzymatic efficiency in different oligomerization states.