Glycol methacrylate as an embedding medium for bone

A simple and reliable procedure for embedding undecalcified trabecular bone tissue in noncommercial glycol methacrylate (GMA) has been developed. The embedding mixture includes a monomer, methacrylic acid hydroxyethyl ester; a copolymer, methacrylic acid butyl ester; a cross-linker, ethylene glycol dimethacrylate; a catalyst, Luperco; a chemical initiator (N,N-dimethylaniline) and, to avoid excessive elevation of temperature during polymerization, a heat moderator, alpha-terpinene. The appropriate proportions of these components have been selected to give specimens which can be easily sectioned with classical microtomes and which do not swell but spread evenly on a water surface. Since polymerization occurs at -4 C, the method allows demonstration of such enzymatic activities as acid and alkaline phosphatase and carbonic anhydrase. It provides excellent preservation of bone tissue and in studies of bone metabolism allows histomorphometry as well as visualization of fluorescent labeling and radioactive markers. The cost is significantly less than available commercial kits. In our hands glycol methacrylate is at present more useful than methyl methacrylate and is used in our laboratory for routine embedding of bone tissue.     

Thermogelling aqueous solutions of alternating multiblock copolymers of poly(L-lactic acid) and poly(ethylene glycol)

We are reporting alternating multiblock copolymers of poly(L-lactic acid)/poly(ethylene glycol) aqueous solution (> 15 wt %) undergoing sol-gel-sol transition as the temperature increases from 20 to 60 degrees C. Micelles of the multiblock copolymers (in water) are about 20 nm in radius at low temperature. They are aggregated to a larger size as the temperature increases, which should play a critical role in the sol-to-gel transition. The transition temperature and gel window were affected by the molecular weight and composition of the multiblock copolymer. In particular, the aqueous solution of an alternating multiblock copolymer (Mn approximately 6700 daltons) prepared from poly(ethylene glycol) (Mn approximately 600 daltons) and poly(L-lactic acid) (Mn approximately 1300 daltons) showed a maximum modulus at body temperature (37 degrees C). The in situ gel forming ability of the polymer aqueous solution in vivo as well as in vitro indicates that it can be a promising injectable biomaterial.     

Contribution of water to free energy of hydrolysis of pyrophosphate

The energy of hydrolysis of phosphate compounds varies depending on whether they are in solution or bound to the catalytic site of enzymes. With the purpose of simulating the conditions at the catalytic site, the observed equilibrium constant for pyrophosphate hydrolysis (Kobsd) was measured in aqueous mixtures of dimethyl sulfoxide, ethylene glycol, or polymers of ethylene glycol. The reaction was catalyzed by yeast inorganic pyrophosphatase at 30 degrees C. All the cosolvents used promoted a decrease of Kobsd. Polymers of ethylene glycol were more effective than dimethyl sulfoxide or ethylene glycol in decreasing Kobsd. The higher the molecular weight of the polymer, the lower the value of Kobsd. A decrease in Kobsd from 346 M (delta G degree obsd = -3.5 kcal mol-1) to 0.1 M (delta G degree obsd = 1.3 kcal mol-1) was observed after the addition of 50% (w/v) poly(ethylene glycol) 8000 to a solution containing 0.9 mM MgCl2 and 1 mM Pi at pH 8.0. The association constants of Pi and pyrophosphate for H+ and Mg2+ were measured in presence of different ethylene glycol concentrations in order to calculate the Keq for hydrolysis of different ionic species of pyrophosphate. A decrease in all the Keq was observed. The results are interpreted according to the concept that the energy of hydrolysis of phosphate compounds depends on the different solvation energies of reactants and products.     

Poly(ethylene glycol) multiblock copolymer as a carrier of anti-cancer drug doxorubicin

The synthesis of a novel water-soluble polymer drug carrier system based on biodegradable poly(ethylene glycol) block copolymer is described in this paper. The copolymer consisting of PEG blocks of molecular weight 2000 linked by means of an oligopeptide with amino end groups was prepared by interfacial polycondensation of the diamine and PEG bis(succinimidyl carbonate). The structure of the oligopeptide diamine consisting of glutamic acid and lysine residues was designed as a substrate for cathepsin B, a lysosomal enzyme, which was assumed to be one of the enzymes responsible for the degradation of the polymer carrier in vivo. Each of the oligopeptide blocks incorporated in the carrier contained three carboxylic groups of which some were used for attachment of an anti-cancer drug, doxorubicin (Dox), via a tetrapeptide spacer Gly-Phe-Leu-Gly. This tetrapeptide spacer is susceptible to enzymatic hydrolysis. In vitro release of Dox and the degradation of the polymer chain by cathepsin B as well as preliminary evaluation of in vivo anti-cancer activity of the conjugate are also demonstrated.     

Oxidation and haem loss kinetics of poly(ethylene glycol)-conjugated haemoglobin (MP4): dissociation between in vitro and in vivo oxidation rates

Haemoglobin-based oxygen carriers can undergo oxidation of ferrous haemoglobin into a non-functional ferric form with enhanced rates of haem loss. A recently developed human haemoglobin conjugated to maleimide-activated poly(ethylene glycol), termed MP4, has unique physicochemical properties (increased molecular radius, high oxygen affinity and low cooperativity) and lacks the typical hypertensive response observed with most cell-free haemoglobin solutions. The rate of in vitro MP4 autoxidation is higher compared with the rate for unmodified SFHb (stroma-free haemoglobin), both at room temperature (20-22 degrees C) and at 37 degrees C (P<0.001). This appears to be attributable to residual catalase activity in SFHb but not MP4. In contrast, MP4 and SFHb showed the same susceptibility to oxidation by reactive oxygen species generated by a xanthine-xanthine oxidase system. Once fully oxidized to methaemoglobin, the rate of in vitro haem loss was five times higher in MP4 compared with SFHb in the fast phase, which we assign to the beta subunits, whereas the slow phase (i.e. haem loss from alpha chains) showed similar rates for the two haemoglobins. Formation of MP4 methaemoglobin in vivo following transfusion in rats and humans was slower than predicted by its first-order in vitro autoxidation rate, and there was no appreciable accumulation of MP4 methaemoglobin in plasma before disappearing from the circulation. These results show that MP4 oxidation and haem loss characteristics observed in vitro provide information regarding the effect of poly(ethylene glycol) conjugation on the stability of the haemoglobin molecule, but do not correspond to the oxidation behaviour of MP4 in vivo.     

An 18 kDa Acid Phosphatase from Chicken Heart Possesses Phosphotransferase Activity

A low molecular weight acid phosphatase was purified to homogeneity from chicken heart with a specific activity of 42 U/mg and a recovery of about 1%. Nearly 800 fold purification was achieved. The molecular weight was estimated to be 18 kDa by SDS-polyacrylamide gel electrophoresis. Para-nitrophenyl phosphate, phenyl phosphate and flavin mononucleotide were efficiently hydrolysed by the enzyme and found to be good substrates. Fluoride and tartrate had no inhibitory effect while phosphate, vanadate and molybdate strongly inhibited the enzyme. The acid phosphatase was stimulated in the presence of glycerol, ethylene glycol, methanol, ethanol and acetone, which reflected the phosphotransferase activity. When phosphate acceptors such as ethylene glycol concentrations were increased, the ratio of phosphate transfer to hydrolysis was also increased, demonstrating the presence of a transphosphorylation reaction where an acceptor can compete with water in the rate limiting step involving hydrolysis of a covalent phospho enzyme intermediate. Partition experiments carried out with two substrates, para-nitrophenyl phosphate and phenyl phosphate, revealed a constant product ratio of 1.7 for phosphotransfer to ethylene glycol versus hydrolysis, strongly supporting the existence of common covalent phospho enzyme intermediate. A constant ratio of K _cat/K _m, 4.3×10⁴, found at different ethylene glycol concentrations, also supported the idea that the rate limiting step was the hydrolysis of the phospho enzyme intermediate.     

Unimolecular micelles based on hydrophobically derivatized hyperbranched polyglycerols: biodistribution studies

We recently reported the synthesis and testing of a new class of unimolecular micelles based on hyperbranched polyglycerols as second generation synthetic plasma expanders and as general drug delivery vehicles. A detailed biodistribution study of two derivatized hyperbranched polyglycerols of different molecular weights derivatized with hydrophobic groups and short poly(ethylene glycol) chains is reported in this article. In mice, these materials are nontoxic with circulation half-lives as high as 31 h, controllable by manipulating the molecular weight and the degree of PEG derivatization. Organ accumulation is low, presumably due to the "pegylation" effect. Thermal degradation and hydrolysis data suggest that these polymers are highly stable with a long shelf life, a major advantage for a pharmaceutical product. Degradation under acidic conditions has been observed for these polymers.     

Survival Rate and Ultrastructure of Vitrified Bovine in vitro and in vivo Developed Embryos

The capacity of different vitrification media and methods was tested onto in vivo and in vitro produced bovine morula/blastocysts and their ultrastructure and survival studied post-thawing. Two vitrification solutions were finally selected, named 40 ES (40% ethylene glycol in PBS containing 0.5 M sucrose) and 35 EFS (composed of 35% (v/v) ethylene glycol in PBS containing 0.5 M/l sucrose and 30% (w/v) Ficoll 70). The straws were either precooled or not precooled in nitrogen vapour, plunged and stored in LN2 for 10–25 days, and then thawed in a 20° C waterbath. The content of the straws was rediluted in 1M sucrose solution in PBS and later cocultured with BOEC for 48 h. The overall survival rates for in vitro and in vivo embryos were 36% (12 of 33) and 20% (3 of 15) after 24 h and 21% (7 of 33) and 33% (5 of 15 ) after 48 h. The survival rates for precooled embryos were significantly higher than for not precooled (48% vs 13% after 24 h and 44% vs 4% after 48 h) when tested across vitrification media. The in vitro-produced embryos presented an ultrastructure similar to the pre-freeze state, irrespective of the vitrification media used. The in vivo developed embryos showed a rather modified post-thaw ultrastructure, with clear signs of osmotic changes at both the trophoblastic and embryonic cells. The results indicated that in vitro and in vivo developed bovine embryos can survive vitrification using ethylene glycol as a cryoprotectant.     

New technology for vitrification and field (microscope-free) warming and transfer of small ruminant embryos

This study was designed to test the efficiency of recently developed vitrification technology followed by microscope-free thawing and transfer of sheep embryos. In a first set of experiments, in vivo derived embryos at the morula to blastocyst stage were frozen in an automated freezer in ethylene glycol, and after thawing and removal of cryoprotectants, were transferred to recipient ewes according to a standard protocol (control group). A second group of embryos were loaded into open-pulled straws (OPS) and plunged into liquid nitrogen after exposure at room temperature to the media: 10% glycerol (G) for 5 min, 10% G+20% ethylene glycol (EG) for 5 min, 25% G+25% EG for 30s; or 10% EG+10% DMSO for 3 min, 20% EG+20% DMSO+0.3M trehalose for 30s. The OPS were thawed by plunging into tubes containing 0.5M trehalose. After this rapid thawing, the embryos were directly transferred using OPS as the catheter for the transplantation process. In a second set of experiments, in vivo derived and in vitro produced expanded blastocysts were vitrified in OPS and then transferred as described above. The lambing rates recorded (59% for the conventionally cryopreserved in vivo derived embryos, 56% for the vitrified in vivo derived embryos, and 20% for the vitrified in vitro produced embryos), suggest the suitability of the vitrification technique for the transfer of embryos obtained both in vivo and in vitro. This simple technology gives rise to a high embryo survival rate and will no doubt have applications in rearing sheep or other small ruminants.     

Toxic effects of some alcohol and ethylene glycol derivatives on Cladosporium resinae.

Eleven commercially available alcohol and ethylene glycol derivatives were tested for their toxicity toward a problem organism in jet fuel, Cladosporium resinae. In the presence of glucose, 20% (vol/vol) ethylene glycol monomethyl ether prevented spore germination and mycelial growth, and 10% (vol/vol) 2-ethoxybutanol, 10% 2-isopropoxyethanol, 10% 3-methoxybutanol, 5% 2-butyloxyethanol, 5% ethylene glycol dibutyl ether, and 5% diethylene glycol monobutyl ether were found to have similar effects. In a biphasic kerosene-water system, 3-methoxybutanol, 2-butyloxyethanol, and diethylene glycol monobutyl ether were again found to be more toxic than ethylene glycol monomethyl ether. Considerable potassium efflux, protein leakage, and inhibition of endogenous respiration were observed in the presence of the more toxic compounds. 2-Butyloxyethanol also caused loss of sterols from cells.     

Osteogenic differentiation of human placenta-derived mesenchymal stem cells (PMSCs) on electrospun nanofiber meshes

Numerous challenges remain in the successful clinical translation of cell-based therapeutic studies for skeletal tissue repair, including appropriate cell sources and viable cell delivery systems. Poly(ethylene glycol)-poly(ε-caprolactone) (PEG-PCL) amphiphilic block copolymers have been extensively explored in microspheres preparation. Due to the introduction of hydrophilic PEG segments into PCL backbones, these copolymers have shown much more potentials in carrying protein, lipophilic drugs or genes than commonly used poly (ε-caprolactone) (PCL) and poly (lactic acid). The aim of this study is to investigate the attachment and osteogenic differentiation of human placenta derived mesenchymal stem cells (PMSCs) on PEG-PCL triblock copolymers nanofiber scaffolds. Here we demonstrated that PMSCs proliferate robustly and can be effectively differentiated into osteogenic-like cells on nanofiber scaffolds. This study provides evidence for the use of nanofiber scaffolds as an ideal supporting material for in vitro PMSCs culture and an in vivo cell delivery vehicle for bone repair.     

Amphiphilic chitosan nanosphere: studies on formation, toxicity, and guest molecule incorporation

Amphiphilic chitosan developed by conjugating hydrophobic phthalimido groups and hydrophilic poly (ethylene glycol) chains gives a well-dispersed colloidal solution in polar solvents and shows a regular nano-sized spherical structure ( approximately 200 nm) with negatively charged surface (-31.24+/-4.85 mV). An in vivo acute oral toxicity test confirms the non-toxicity of the chitosan nanosphere with LD(50) higher than 2000 mg/kg body weight. A success of incorporating amine molecules into the nanosphere declares that the heterogeneous incorporation system is more effective than the homogeneous ones. The study on guest molecule incorporation using alkylamines and carboxylic acid as models suggests requirements that the guest be hydrophobic and positively charged. TGA study clarifies that the weight loss at 250-300 degrees C relating to the amount of guest incorporation via heterogeneous system is as high as 42.3%, whereas those of homogeneous systems are about 16.86-28.27%. The nanosphere size is significantly changed after guest incorporation, that is, from 200 nm to approximately 500-1000 nm.     

Mechanism of pneumococcal cell wall degradation in vitro and in vivo.

We compared the products of autolytic amidase-catalyzed wall degradation in vivo (in penicillin-induced lysis) and in vitro. Pneumococci labeled in their cell wall stem peptides by radioactive lysine were treated with penicillin, and the nature of wall degradation products released to the medium during lysis of the bacteria was determined. At early times of lysis (20% loss of wall label), virtually all the radioactive peptides released (greater than 94%) were of high molecular size and were still attached to glycan and teichoic acid. At times of more extensive bacterial lysis (56%), progressively larger and larger fractions of the released peptides became free, i.e., detached from glycan and teichoic acid. Analysis of the nondegraded residual wall material by high-resolution high-pressure liquid chromatography revealed that this in vivo-triggered autolysis did not involve selective hydrolysis of some of the chemically distinct stem peptides. Parallel in vitro experiments yielded completely different results. Purified pneumococcal cell walls labeled with radioactive lysine were treated in vitro with low concentrations of pure amidase, and the nature of wall degradation products released during limited hydrolysis and after more extensive degradation was determined. In sharp contrast to the in vivo experiments, the main products of in vitro hydrolysis were free peptides. After a short treatment with amidase (resulting in a 20% loss of label), the material released was enriched for the monomeric stem peptides. At all times of hydrolysis (including the time of extensive degradation), only a relatively small fraction of the released wall peptides was covalently attached to glycan and teichoic acid components (17% as compared with 40% in the intact cell wall). We propose that the in vivo-triggered amidase activity first attacks the amide bonds in some strategically located (or unprotected) stem peptides that hold large segments of cell wall material together. The observations indicate that the in vivo activity of the pneumococcal autolysin is under topographic constraints.     

Curcumin analogue UBS109 prevents bone loss in breast cancer bone metastasis mouse model: involvement in osteoblastogenesis and osteoclastogenesis

Bone metastasis of breast cancer typically leads to osteolysis, which causes severe pathological bone fractures and hypercalcemia. Bone homeostasis is skillfully regulated through osteoblasts and osteoclasts. Bone loss with bone metastasis of breast cancer may be due to both activation of osteoclastic bone resorption and suppression of osteoblastic bone formation. This study was undertaken to determine whether the novel curcumin analogue UBS109 has preventive effects on bone loss induced by breast cancer cell bone metastasis. Nude mice were inoculated with breast cancer MDA-MB-231 bone metastatic cells (10⁶ cells/mouse) into the head of the right and left tibia. One week after inoculation, the mice were treated with control (vehicle), oral administration (p.o.) of UBS109 (50 or 150 mg/kg body weight), or intraperitoneal administration (i.p.) of UBS109 (10 or 20 mg/kg body weight) once daily for 5 days per week for 7 weeks. After UBS109 administration for 7 weeks, hind limbs were assessed using an X-ray diagnosis system and hematoxylin and eosion staining to determine osteolytic destruction. Bone marrow cells obtained from the femurs and tibias were cultured to estimate osteoblastic mineralization and osteoclastogenesis ex vivo and in vitro. Remarkable bone loss was demonstrated in the tibias of mice inoculated with breast cancer MDA-MB-231 bone metastatic cells. This bone loss was prevented by p.o. administration of UBS109 (50 and 150 mg/kg body weight) and i.p. treatment of UBS109 (10 and 20 mg/kg) in vivo. Culture of bone marrow cells obtained from the bone tissues of mice with breast cancer cell bone metastasis showed suppressed osteoblastic mineralization and stimulated osteoclastogenesis ex vivo. These changes were not seen after culture of the bone marrow cells obtained from mice treated with UBS109. Moreover, UBS109 was found to stimulate osteoblastic mineralization and suppress lipopolysaccharide (LPS)-induced osteoclastogenesis in bone marrow cells obtained from normal nude mice in vitro. These findings suggest that the novel curcumin analogue UBS109 prevents breast cancer cell bone metastasis-induced bone loss by stimulating osteoblastic mineralization and suppressing osteoclastogenesis.     

Synthesis and biological evaluation of a cross-linked hyaluronan-mitomycin C hydrogel

A cross-linked hyaluronan (HA) hydrogel that contained a covalently bound derivative of the anti-proliferative drug mitomycin C (MMC) was synthesized and evaluated in vitro and in vivo. The HA-MMC hydrogel was prepared by coupling MMC-aziridinyl-N-acrylate with thiol-modified HA followed by cross-linking with poly(ethylene glycol) diacrylate (PEGDA). MMC was released from 0.5% and 2.0% MMC films by hydrolysis in proportion to the MMC loading. When incubated in vitro with human T31 tracheal scar fibroblasts, 0.5% MMC films inhibited proliferation, whereas 2.0% MMC films were cytotoxic. When implanted in vivo into a rat peritoneal cavity, neither 0.5% nor 2.0% HA-MMC films elicited a severe peritoneal fluid leukocyte response. Importantly, MMC reduced the thickness of fibrous tissue formed surrounding the implanted films. Thus, cross-linked HA-MMC films have strong potential as anti-fibrotic barriers for the prevention of post-surgical adhesions.     

Cytokine immunotherapy of cancer with controlled release biodegradable microspheres in a human tumor xenograft/SCID mouse model

 A novel biodegradable poly(lactic acid) microsphere formulation was evaluated for in vivo cytokine immunotherapy of cancer in a human tumor xenograft/severe combined immunodeficiency (SCID) mouse model. Co-injection of interleukin-2 (IL-2)-loaded microspheres with tumor cells into a subcutaneous site resulted in the complete suppression of tumor engraftment in 80% of animals. In contrast, bovine-serum-albumin(BSA)-loaded particles or bolus injections of poly(ethylene glycol)/IL-2 were ineffective in preventing tumor growth. The antitumor effect of IL-2 released by the microspheres was shown to be mediated by the mouse natural killer cells. This is the first evidence that the rejection of human tumor xenografts can be provoked by the sustained in vivo delivery of IL-2 from biodegradable microspheres. The use of poly(lactic acid) microspheres to deliver cytokines to the tumor environment could provide a safer and simpler alternative to gene therapy protocols in the treatment of cancer. Received: 9 September 1997 / Accepted: 30 October 1997     

Sorption immobilization of alpha-amylase from Bacillus subtilis using meshed carboxyl polyelectrolytes

Immobilization of alpha-amylase from Bacillus subtilis by adsorption on carboxyl polyelectrolytes, copolymers of methacrylic acid and ethylene glycol dimethacrylate, was being investigated depending on the structure of the polymeric matrix. It is demonstrated that cation exchange resins can be successfully used for reversible sorption and immobilization of alpha-amylase. It was found that the more heterogeneous the structure of the polymeric carrier, the higher is reversibility of the enzyme adsorption. The isothermic process of Bac. subtilis alpha-amylase adsorption on copolymers of different structures was studied as well. The equilibrium of the sorption system was proved to be true.     

Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in soils.

The microbial degradation of tensile test pieces made of poly(3-hydroxybutyrate) [P(3HB)] or a copolymer of 90% 3-hydroxybutyric acid and 10% 3-hydroxyvaleric acid was studied in soils incubated at a constant temperature of 15, 28, or 40 degrees C for up to 200 days. In addition, hydrolytic degradation in sterile buffer at temperatures ranging from 4 to 55 degrees C was monitored for 98 days. Degradation was measured through loss of weight (surface erosion), molecular weight, and mechanical strength. While no weight loss was recorded in sterile buffer, samples incubated in soils were degraded at an erosion rate of 0.03 to 0.64% weight loss per day, depending on the polymer, the soil, and the incubation temperature. The erosion rate was enhanced by incubation at higher temperatures, and in most cases the copolymer lost weight at a higher rate than the homopolymer. The molecular weights of samples incubated at 40 degrees C in soils and those incubated at 40 degrees C in sterile buffer decreased at similar rates, while the molecular weights of samples incubated at lower temperatures remained almost unaffected, indicating that molecular weight decrease is due to simple hydrolysis and not to the action of biodegrading microorganisms. The degradation resulted in loss of mechanical properties. From the samples used in the biodegradation studies, 295 dominant microbial strains capable of degrading P (3HB) and the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer in vitro were isolated and identified.(ABSTRACT TRUNCATED AT 250 WORDS)     

A germ line mutation in the death domain of DAPK-1 inactivates ERK-induced apoptosis

p53 is activated genetically by a set of kinases that are components of the calcium calmodulin kinase superfamily, including CHK2, AMP kinase, and DAPK-1. In dissecting the mechanism of DAPK-1 control, a novel mutation (N1347S) was identified in the death domain of DAPK-1. The N1347S mutation prevented the death domain module binding stably to ERK in vitro and in vivo. Gel filtration demonstrated that the N1347S mutation disrupted the higher order oligomeric nature of the purified recombinant death domain miniprotein. Accordingly, the N1347S death domain module is defective in vivo in the formation of high molecular weight oligomeric intermediates after cross-linking with ethylene glycol bis(succinimidylsuccinate). Full-length DAPK-1 protein harboring a N1347S mutation in the death domain was also defective in binding to ERK in cells and was defective in formation of an ethylene glycol bis(succinimidylsuccinate)-cross-linked intermediate in vivo. Full-length DAPK-1 encoding the N1347S mutation was attenuated in tumor necrosis factor receptor-induced apoptosis. However, the N1347S mutation strikingly prevented ERK:DAPK-1-dependent apoptosis as defined by poly(ADP-ribose) polymerase cleavage, Annexin V staining, and terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling imaging. Significant penetrance of the N1347S allele was identified in normal genomic DNA indicating the mutation is germ line, not tumor derived. The frequency observed in genomic DNA was from 37 to 45% for homozygous wild-type, 41 to 47% for heterozygotes, and 12 to 15% for homozygous mutant. These data highlight a naturally occurring DAPK-1 mutation that alters the oligomeric structure of the death domain, de-stabilizes DAPK-1 binding to ERK, and prevents ERK:DAPK-1-dependent apoptosis.     

Poly(caprolactone-co-oxo-crown ether)-based poly(urethane)urea for soft tissue engineering applications

Random copolymers of epsilon-caprolactone and 2-oxo-12-crown-4 ether, poly(CL-co-OC), were used as soft segments in the synthesis of a set of poly(urethane)urea thermoplastic elastomers. With increasing OC content, the soft segment crystallinity decreased, which influenced the mechanical properties: strain induced crystallization disappeared upon the introduction of OC into poly(CL). The material therefore became weaker, however, without a reduction in strain at break. All polymers showed mechanical properties that are suitable for soft tissue engineering. Degradation studies of poly(CL-co-OC) copolymers revealed a higher intrinsic rate of hydrolysis as compared to poly(CL). When at least two neighboring OC units were present in the soft segment, a jump in the intrinsic hydrolysis rate was observed. From this study we deduced an ideal OC:CL ratio for the thermoplastic elastomer soft segments for soft tissue engineering applications. An in vitro degradation study of these poly(urethane)urea showed an increased weight loss. Combined with the enhanced hydrophilicity and reduced crystallinity, we are confident that this will indeed lead to an increased degradation rate in vivo.