Improved Ancestry Estimation for both Genotyping and Sequencing Data using Projection Procrustes Analysis and Genotype Imputation

Accurate estimation of individual ancestry is important in genetic association studies, especially when a large number of samples are collected from multiple sources. However, existing approaches developed for genome-wide SNP data do not work well with modest amounts of genetic data, such as in targeted sequencing or exome chip genotyping experiments. We propose a statistical framework to estimate individual ancestry in a principal component ancestry map generated by a reference set of individuals. This framework extends and improves upon our previous method for estimating ancestry using low-coverage sequence reads (LASER 1.0) to analyze either genotyping or sequencing data. In particular, we introduce a projection Procrustes analysis approach that uses high-dimensional principal components to estimate ancestry in a low-dimensional reference space. Using extensive simulations and empirical data examples, we show that our new method (LASER 2.0), combined with genotype imputation on the reference individuals, can substantially outperform LASER 1.0 in estimating fine-scale genetic ancestry. Specifically, LASER 2.0 can accurately estimate fine-scale ancestry within Europe using either exome chip genotypes or targeted sequencing data with off-target coverage as low as 0.05×. Under the framework of LASER 2.0, we can estimate individual ancestry in a shared reference space for samples assayed at different loci or by different techniques. Therefore, our ancestry estimation method will accelerate discovery in disease association studies not only by helping model ancestry within individual studies but also by facilitating combined analysis of genetic data from multiple sources.     

Accuracy of genotype imputation in sheep breeds

Although genomic selection offers the prospect of improving the rate of genetic gain in meat, wool and dairy sheep breeding programs, the key constraint is likely to be the cost of genotyping. Potentially, this constraint can be overcome by genotyping selection candidates for a low density (low cost) panel of SNPs with sparse genotype coverage, imputing a much higher density of SNP genotypes using a densely genotyped reference population. These imputed genotypes would then be used with a prediction equation to produce genomic estimated breeding values. In the future, it may also be desirable to impute very dense marker genotypes or even whole genome re‐sequence data from moderate density SNP panels. Such a strategy could lead to an accurate prediction of genomic estimated breeding values across breeds, for example. We used genotypes from 48 640 (50K) SNPs genotyped in four sheep breeds to investigate both the accuracy of imputation of the 50K SNPs from low density SNP panels, as well as prospects for imputing very dense or whole genome re‐sequence data from the 50K SNPs (by leaving out a small number of the 50K SNPs at random). Accuracy of imputation was low if the sparse panel had less than 5000 (5K) markers. Across breeds, it was clear that the accuracy of imputing from sparse marker panels to 50K was higher if the genetic diversity within a breed was lower, such that relationships among animals in that breed were higher. The accuracy of imputation from sparse genotypes to 50K genotypes was higher when the imputation was performed within breed rather than when pooling all the data, despite the fact that the pooled reference set was much larger. For Border Leicesters, Poll Dorsets and White Suffolks, 5K sparse genotypes were sufficient to impute 50K with 80% accuracy. For Merinos, the accuracy of imputing 50K from 5K was lower at 71%, despite a large number of animals with full genotypes (2215) being used as a reference. For all breeds, the relationship of individuals to the reference explained up to 64% of the variation in accuracy of imputation, demonstrating that accuracy of imputation can be increased if sires and other ancestors of the individuals to be imputed are included in the reference population. The accuracy of imputation could also be increased if pedigree information was available and was used in tracking inheritance of large chromosome segments within families. In our study, we only considered methods of imputation based on population‐wide linkage disequilibrium (largely because the pedigree for some of the populations was incomplete). Finally, in the scenarios designed to mimic imputation of high density or whole genome re‐sequence data from the 50K panel, the accuracy of imputation was much higher (86–96%). This is promising, suggesting that in silico genome re‐sequencing is possible in sheep if a suitable pool of key ancestors is sequenced for each breed.     

Genotype imputation in the domestic dog

Application of imputation methods to accurately predict a dense array of SNP genotypes in the dog could provide an important supplement to current analyses of array-based genotyping data. Here, we developed a reference panel of 4,885,283 SNPs in 83 dogs across 15 breeds using whole genome sequencing. We used this panel to predict the genotypes of 268 dogs across three breeds with 84,193 SNP array-derived genotypes as inputs. We then (1) performed breed clustering of the actual and imputed data; (2) evaluated several reference panel breed combinations to determine an optimal reference panel composition; and (3) compared the accuracy of two commonly used software algorithms (Beagle and IMPUTE2). Breed clustering was well preserved in the imputation process across eigenvalues representing 75 % of the variation in the imputed data. Using Beagle with a target panel from a single breed, genotype concordance was highest using a multi-breed reference panel (92.4 %) compared to a breed-specific reference panel (87.0 %) or a reference panel containing no breeds overlapping with the target panel (74.9 %). This finding was confirmed using target panels derived from two other breeds. Additionally, using the multi-breed reference panel, genotype concordance was slightly higher with IMPUTE2 (94.1 %) compared to Beagle; Pearson correlation coefficients were slightly higher for both software packages (0.946 for Beagle, 0.961 for IMPUTE2). Our findings demonstrate that genotype imputation from SNP array-derived data to whole genome-level genotypes is both feasible and accurate in the dog with appropriate breed overlap between the target and reference panels.     

Marker Density and Read Depth for Genotyping Populations Using Genotyping-by-Sequencing

Genotyping-by-sequencing (GBS) approaches provide low-cost, high-density genotype information. However, GBS has unique technical considerations, including a substantial amount of missing data and a nonuniform distribution of sequence reads. The goal of this study was to characterize technical variation using this method and to develop methods to optimize read depth to obtain desired marker coverage. To empirically assess the distribution of fragments produced using GBS, ∼8.69 Gb of GBS data were generated on the Zea mays reference inbred B73, utilizing ApeKI for genome reduction and single-end reads between 75 and 81 bp in length. We observed wide variation in sequence coverage across sites. Approximately 76% of potentially observable cut site-adjacent sequence fragments had no sequencing reads whereas a portion had substantially greater read depth than expected, up to 2369 times the expected mean. The methods described in this article facilitate determination of sequencing depth in the context of empirically defined read depth to achieve desired marker density for genetic mapping studies.     

Accuracy of genotype imputation in Labrador Retrievers

The dog is a valuable model species for the genetic analysis of complex traits, and the use of genotype imputation in dogs will be an important tool for future studies. It is of particular interest to analyse the effect of factors like single nucleotide polymorphism (SNP) density of genotyping arrays and relatedness between dogs on imputation accuracy due to the acknowledged genetic and pedigree structure of dog breeds. In this study, we simulated different genotyping strategies based on data from 1179 Labrador Retriever dogs. The study involved 5826 SNPs on chromosome 1 representing the high density (HighD) array; the low‐density (LowD) array was simulated by masking different proportions of SNPs on the HighD array. The correlations between true and imputed genotypes for a realistic masking level of 87.5% ranged from 0.92 to 0.97, depending on the scenario used. A correlation of 0.92 was found for a likely scenario (10% of dogs genotyped using HighD, 87.5% of HighD SNPs masked in the LowD array), which indicates that genotype imputation in Labrador Retrievers can be a valuable tool to reduce experimental costs while increasing sample size. Furthermore, we show that genotype imputation can be performed successfully even without pedigree information and with low relatedness between dogs in the reference and validation sets. Based on these results, the impact of genotype imputation was evaluated in a genome‐wide association analysis and genomic prediction in Labrador Retrievers.     

Designing Genome-Wide Association Studies: Sample Size, Power, Imputation, and the Choice of Genotyping Chip

Genome-wide association studies are revolutionizing the search for the genes underlying human complex diseases. The main decisions to be made at the design stage of these studies are the choice of the commercial genotyping chip to be used and the numbers of case and control samples to be genotyped. The most common method of comparing different chips is using a measure of coverage, but this fails to properly account for the effects of sample size, the genetic model of the disease, and linkage disequilibrium between SNPs. In this paper, we argue that the statistical power to detect a causative variant should be the major criterion in study design. Because of the complicated pattern of linkage disequilibrium (LD) in the human genome, power cannot be calculated analytically and must instead be assessed by simulation. We describe in detail a method of simulating case-control samples at a set of linked SNPs that replicates the patterns of LD in human populations, and we used it to assess power for a comprehensive set of available genotyping chips. Our results allow us to compare the performance of the chips to detect variants with different effect sizes and allele frequencies, look at how power changes with sample size in different populations or when using multi-marker tags and genotype imputation approaches, and how performance compares to a hypothetical chip that contains every SNP in HapMap. A main conclusion of this study is that marked differences in genome coverage may not translate into appreciable differences in power and that, when taking budgetary considerations into account, the most powerful design may not always correspond to the chip with the highest coverage. We also show that genotype imputation can be used to boost the power of many chips up to the level obtained from a hypothetical “complete” chip containing all the SNPs in HapMap. Our results have been encapsulated into an R software package that allows users to design future association studies and our methods provide a framework with which new chip sets can be evaluated.     

Linkage disequilibrium among commonly genotyped SNP variants detected from bull sequence,

Genomic prediction utilizing causal variants could increase selection accuracy above that achieved with SNPs genotyped by currently available arrays used for genomic selection. A number of variants detected from sequencing influential sires are likely to be causal, but noticeable improvements in prediction accuracy using imputed sequence variant genotypes have not been reported. Improvement in accuracy of predicted breeding values may be limited by the accuracy of imputed sequence variants. Using genotypes of SNPs on a high‐density array and non‐synonymous SNPs detected in sequence from influential sires of a multibreed population, results of this examination suggest that linkage disequilibrium between non‐synonymous and array SNPs may be insufficient for accurate imputation from the array to sequence. In contrast to 75% of array SNPs being strongly correlated to another SNP on the array, less than 25% of the non‐synonymous SNPs were strongly correlated to an array SNP. When correlations between non‐synonymous and array SNPs were strong, distances between the SNPs were greater than separation that might be expected based on linkage disequilibrium decay. Consistently near‐perfect whole‐genome linkage disequilibrium between the full array and each non‐synonymous SNP within the sequenced bulls suggests that whole‐genome approaches to infer sequence variants might be more accurate than imputation based on local haplotypes. Opportunity for strong linkage disequilibrium between sequence and array SNPs may be limited by discrepancies in allele frequency distributions, so investigating alternate genotyping approaches and panels providing greater chances of frequency‐matched SNPs strongly correlated to sequence variants is also warranted. Genotypes used for this study are available from https://www.animalgenome.org/repository/pub/ ;USDA2017.0519/.     

Low-pass genome-wide sequencing and variant inference using identity-by-descent in an isolated human population

Whole-genome sequencing in an isolated population with few founders directly ascertains variants from the population bottleneck that may be rare elsewhere. In such populations, shared haplotypes allow imputation of variants in unsequenced samples without resorting to complex statistical methods as in studies of outbred cohorts. We focus on an isolated population cohort from the Pacific Island of Kosrae, Micronesia, where we previously collected SNP array and rich phenotype data for the majority of the population. We report identification of long regions with haplotypes co-inherited between pairs of individuals and methodology to leverage such shared genetic content for imputation. Our estimates show that sequencing as few as 40 personal genomes allows for inference in up to 60% of the 3000-person cohort at the average locus. We ascertained a pilot data set of whole-genome sequences from seven Kosraean individuals, with average 5× coverage. This assay identified 5,735,306 unique sites of which 1,212,831 were previously unknown. Additionally, these variants are unusually enriched for alleles that are rare in other populations when compared to geographic neighbors (published Korean genome SJK). We used the presence of shared haplotypes between the seven Kosraen individuals to estimate expected imputation accuracy of known and novel homozygous variants at 99.6% and 97.3%, respectively. This study presents whole-genome analysis of a homogenous isolate population with emphasis on optimal rare variant inference.     

Genotype determination for polymorphisms in linkage disequilibrium

Background  

Genome-wide association studies with single nucleotide polymorphisms (SNPs) show great promise to identify genetic determinants of complex human traits. In current analyses, genotype calling and imputation of missing genotypes are usually considered as two separated tasks. The genotypes of SNPs are first determined one at a time from allele signal intensities. Then the missing genotypes, i.e., no-calls caused by not perfectly separated signal clouds, are imputed based on the linkage disequilibrium (LD) between multiple SNPs. Although many statistical methods have been developed to improve either genotype calling or imputation of missing genotypes, treating the two steps independently can lead to loss of genetic information.     

One Size Doesn't Fit All - RefEditor: Building Personalized Diploid Reference Genome to Improve Read Mapping and Genotype Calling in Next Generation Sequencing Studies

With rapid decline of the sequencing cost, researchers today rush to embrace whole genome sequencing (WGS), or whole exome sequencing (WES) approach as the next powerful tool for relating genetic variants to human diseases and phenotypes. A fundamental step in analyzing WGS and WES data is mapping short sequencing reads back to the reference genome. This is an important issue because incorrectly mapped reads affect the downstream variant discovery, genotype calling and association analysis. Although many read mapping algorithms have been developed, the majority of them uses the universal reference genome and do not take sequence variants into consideration. Given that genetic variants are ubiquitous, it is highly desirable if they can be factored into the read mapping procedure. In this work, we developed a novel strategy that utilizes genotypes obtained a priori to customize the universal haploid reference genome into a personalized diploid reference genome. The new strategy is implemented in a program named RefEditor. When applying RefEditor to real data, we achieved encouraging improvements in read mapping, variant discovery and genotype calling. Compared to standard approaches, RefEditor can significantly increase genotype calling consistency (from 43% to 61% at 4X coverage; from 82% to 92% at 20X coverage) and reduce Mendelian inconsistency across various sequencing depths. Because many WGS and WES studies are conducted on cohorts that have been genotyped using array-based genotyping platforms previously or concurrently, we believe the proposed strategy will be of high value in practice, which can also be applied to the scenario where multiple NGS experiments are conducted on the same cohort. The RefEditor sources are available at https://github.com/superyuan/refeditor.

This is a PLOS Computational Biology Software Article.

     

Validation of Genotyping-By-Sequencing Analysis in Populations of Tetraploid Alfalfa by 454 Sequencing

Genotyping-by-sequencing (GBS) is a relatively low-cost high throughput genotyping technology based on next generation sequencing and is applicable to orphan species with no reference genome. A combination of genome complexity reduction and multiplexing with DNA barcoding provides a simple and affordable way to resolve allelic variation between plant samples or populations. GBS was performed on ApeKI libraries using DNA from 48 genotypes each of two heterogeneous populations of tetraploid alfalfa (Medicago sativa spp. sativa): the synthetic cultivar Apica (ATF0) and a derived population (ATF5) obtained after five cycles of recurrent selection for superior tolerance to freezing (TF). Nearly 400 million reads were obtained from two lanes of an Illumina HiSeq 2000 sequencer and analyzed with the Universal Network-Enabled Analysis Kit (UNEAK) pipeline designed for species with no reference genome. Following the application of whole dataset-level filters, 11,694 single nucleotide polymorphism (SNP) loci were obtained. About 60% had a significant match on the Medicago truncatula syntenic genome. The accuracy of allelic ratios and genotype calls based on GBS data was directly assessed using 454 sequencing on a subset of SNP loci scored in eight plant samples. Sequencing depth in this study was not sufficient for accurate tetraploid allelic dosage, but reliable genotype calls based on diploid allelic dosage were obtained when using additional quality filtering. Principal Component Analysis of SNP loci in plant samples revealed that a small proportion (<5%) of the genetic variability assessed by GBS is able to differentiate ATF0 and ATF5. Our results confirm that analysis of GBS data using UNEAK is a reliable approach for genome-wide discovery of SNP loci in outcrossed polyploids.     

Accurate Local-Ancestry Inference in Exome-Sequenced Admixed Individuals via Off-Target Sequence Reads

Estimates of the ancestry of specific chromosomal regions in admixed individuals are useful for studies of human evolutionary history and for genetic association studies. Previously, this ancestry inference relied on high-quality genotypes from genome-wide association study (GWAS) arrays. These high-quality genotypes are not always available when samples are exome sequenced, and exome sequencing is the strategy of choice for many ongoing genetic studies. Here we show that off-target reads generated during exome-sequencing experiments can be combined with on-target reads to accurately estimate the ancestry of each chromosomal segment in an admixed individual. To reconstruct local ancestry, our method SEQMIX models aligned bases directly instead of relying on hard genotype calls. We evaluate the accuracy of our method through simulations and analysis of samples sequenced by the 1000 Genomes Project and the NHLBI Grand Opportunity Exome Sequencing Project. In African Americans, we show that local-ancestry estimates derived by our method are very similar to those derived with Illumina’s Omni 2.5M genotyping array and much improved in relation to estimates that use only exome genotypes and ignore off-target sequencing reads. Software implementing this method, SEQMIX, can be applied to analysis of human population history or used for genetic association studies in admixed individuals.     

Imputation accuracy is robust to cattle reference genome updates

Genotype imputation is routinely applied in a large number of cattle breeds. Imputation has become a need due to the large number of SNP arrays with variable density (currently, from 2900 to 777 962 SNPs). Although many authors have studied the effect of different statistical methods on imputation accuracy, the impact of a (likely) change in the reference genome assembly on imputation from lower to higher density has not been determined so far. In this work, 1021 Italian Simmental SNP genotypes were remapped on the three most recent reference genome assemblies. Four imputation methods were used to assess the impact of an update in the reference genome. As expected, the four methods behaved differently, with large differences in terms of accuracy. Updating SNP coordinates on the three tested cattle reference genome assemblies determined only a slight variation on imputation results within method.     

Genome-wide SNP discovery in walnut with an AGSNP pipeline updated for SNP discovery in allogamous organisms

ABSTRACT: BACKGROUND: A genome-wide set of single nucleotide polymorphisms (SNPs) is a valuable resource in genetic research and breeding and is usually developed by re-sequencing a genome. If a genome sequence is not available, an alternative strategy must be used. We previously reported the development of a pipeline (AGSNP) for genome-wide SNP discovery in coding sequences and other single-copy DNA without a complete genome sequence in self-pollinating (autogamous) plants. Here we updated this pipeline for SNP discovery in outcrossing (allogamous) species and demonstrated its efficacy in SNP discovery in walnut (Juglans regia L.). RESULTS: The first step in the original implementation of the AGSNP pipeline was the construction of a reference sequence and the identification of single-copy sequences in it. To identify single-copy sequences, multiple genome equivalents of short SOLiD reads of another individual were mapped to shallow genome coverage of long Sanger or Roche 454 reads making up the reference sequence. The relative depth of SOLiD reads was used to filter out repeated sequences from single-copy sequences in the reference sequence. The second step was a search for SNPs between SOLiD reads and the reference sequence. Polymorphism within the mapped SOLiD reads would have precluded SNP discovery; hence both individuals had to be homozygous. The AGSNP pipeline was updated here for using SOLiD or other type of short reads of a heterozygous individual for these two principal steps. A total of 32.6X walnut genome equivalents of SOLiD reads of vegetatively propagated walnut scion cultivar 'Chandler' were mapped to 48,661 'Chandler' bacterial artificial chromosome (BAC) end sequences (BESs) produced by Sanger sequencing during the construction of a walnut physical map. A total of 22,799 putative SNPs were initially identified. A total of 6,000 Infinium II type SNPs evenly distributed along the walnut physical map were selected for the construction of an Infinium BeadChip, which was used to genotype a walnut mapping population having 'Chandler' as one of the parents. Genotyping results were used to adjust the filtering parameters of the updated AGSNP pipeline. With the adjusted filtering criteria, 69.6% of SNPs discovered with the updated pipeline were real and could be mapped on the walnut genetic map. A total of 13,439 SNPs were discovered by BES re-sequencing. BESs harboring SNPs were in 677 FPC contigs covering 98% of the physical map of the walnut genome. CONCLUSION: The updated AGSNP pipeline is a versatile SNP discovery tool for a high-throughput, genome-wide SNP discovery in both autogamous and allogamous species. With this pipeline, a large set of SNPs were identified in a single walnut cultivar.     

Fast accurate missing SNP genotype local imputation

ABSTRACT: BACKGROUND: Single nucleotide polymorphism (SNP) genotyping assays normally give rise to certain percents of no-calls; the problem becomes severe when the target organisms, such as cattle, do not have a high resolution genomic sequence. Missing SNP genotypes, when related to target traits, would confound downstream data analyses such as genome-wide association studies (GWAS). Existing methods for recovering the missing values are successful to some extent --- either accurate but not fast enough or fast but not accurate enough. RESULTS: To a target missing genotype, we take only the SNP loci within a genetic distance vicinity and only the samples within a similarity vicinity into our local imputation process. For missing genotype imputation, the comparative performance evaluations through extensive simulation studies using real human and cattle genotype datasets demonstrated that our nearest neighbor based local imputation method was one of the most efficient methods, and outperformed existing methods except the time-consuming fastPHASE; for missing haplotype allele imputation, the comparative performance evaluations using real mouse haplotype datasets demonstrated that our method was not only one of the most efficient methods, but also one of the most accurate methods. CONCLUSIONS: Given that fastPHASE requires a long imputation time on medium to high density datasets, and that our nearest neighbor based local imputation method only performed slightly worse, yet better than all other methods, one might want to adopt our method as an alternative missing SNP genotype or missing haplotype allele imputation method.     

Evaluating the effects of imputation on the power, coverage, and cost efficiency of genome-wide SNP platforms

Genotype imputation is potentially a zero-cost method for bridging gaps in coverage and power between genotyping platforms. Here, we quantify these gains in power and coverage by using 1,376 population controls that are from the 1958 British Birth Cohort and were genotyped by the Wellcome Trust Case-Control Consortium with the Illumina HumanHap 550 and Affymetrix SNP Array 5.0 platforms. Approximately 50% of genotypes at single-nucleotide polymorphisms (SNPs) exclusively on the HumanHap 550 can be accurately imputed from direct genotypes on the SNP Array 5.0 or Illumina HumanHap 300. This roughly halves differences in coverage and power between the platforms. When the relative cost of currently available genome-wide SNP platforms is accounted for, and finances are limited but sample size is not, the highest-powered strategy in European populations is to genotype a larger number of individuals with the HumanHap 300 platform and carry out imputation. Platforms consisting of around 1 million SNPs offer poor cost efficiency for SNP association in European populations.     

Coverage-based consensus calling (CbCC) of short sequence reads and comparison of CbCC results to identify SNPs in chickpea (Cicer arietinum; Fabaceae), a crop species without a reference genome

? Premise of the study: Next-generation sequencing (NGS) technologies are frequently used for resequencing and mining of single nucleotide polymorphisms (SNPs) by comparison to a reference genome. In crop species such as chickpea (Cicer arietinum) that lack a reference genome sequence, NGS-based SNP discovery is a challenge. Therefore, unlike probability-based statistical approaches for consensus calling and by comparison with a reference sequence, a coverage-based consensus calling (CbCC) approach was applied and two genotypes were compared for SNP identification. ? Methods: A CbCC approach is used in this study with four commonly used short read alignment tools (Maq, Bowtie, Novoalign, and SOAP2) and 15.7 and 22.1 million Illumina reads for chickpea genotypes ICC4958 and ICC1882, together with the chickpea trancriptome assembly (CaTA). ? Key results: A nonredundant set of 4543 SNPs was identified between two chickpea genotypes. Experimental validation of 224 randomly selected SNPs showed superiority of Maq among individual tools, as 50.0% of SNPs predicted by Maq were true SNPs. For combinations of two tools, greatest accuracy (55.7%) was reported for Maq and Bowtie, with a combination of Bowtie, Maq, and Novoalign identifying 61.5% true SNPs. SNP prediction accuracy generally increased with increasing reads depth. ? Conclusions: This study provides a benchmark comparison of tools as well as read depths for four commonly used tools for NGS SNP discovery in a crop species without a reference genome sequence. In addition, a large number of SNPs have been identified in chickpea that would be useful for molecular breeding.     

A ddRAD Based Linkage Map of the Cultivated Strawberry,Fragaria xananassa

The cultivated strawberry (Fragaria ×ananassa Duch.) is an allo-octoploid considered difficult to disentangle genetically due to its four relatively similar sub-genomic chromosome sets. This has been alleviated by the recent release of the strawberry IStraw90 whole genome genotyping array. However, array resolution relies on the genotypes used in the array construction and may be of limited general use. SNP detection based on reduced genomic sequencing approaches has the potential of providing better coverage in cases where the studied genotypes are only distantly related from the SNP array’s construction foundation. Here we have used double digest restriction-associated DNA sequencing (ddRAD) to identify SNPs in a 145 seedling F₁ hybrid population raised from the cross between the cultivars Sonata (♀) and Babette (♂). A linkage map containing 907 markers which spanned 1,581.5 cM across 31 linkage groups representing the 28 chromosomes of the species. Comparing the physical span of the SNP markers with the F. vesca genome sequence, the linkage groups resolved covered 79% of the estimated 830 Mb of the F. ×ananassa genome. Here, we have developed the first linkage map for F. ×ananassa using ddRAD and show that this technique and other related techniques are useful tools for linkage map development and downstream genetic studies in the octoploid strawberry.