Polydiacetylene (PDA)-based colorimetric detection of biotin-streptavidin interactions

The natural binding of streptavidin (STA) for a small molecule, biotin, has made it a useful tool in specific targeting application, due to their most specific noncovalent biological interactions in nature. Here, we describe a polydiacetylene (PDA)-based colorimetric biosensor to detect the STA-biotin interactions. We synthesized two kinds of biotin-labeled 10,12-pentacosadiynoic acid (PCDA) monomers having 2(ethylene oxide) or 3(ethylene oxide) spacer and prepared biotin-modified PDA liposomes using them. Upon the addition of STA, the modified PDA liposomes showed a color change from blue to red in about 1h followed by their aggregation and precipitation. The aggregation was found to be due to the cross-linking between the PDA liposomes caused by the STA having four biotin binding sites, which was confirmed by their TEM analysis. Since the STA-biotin interactions are widely adopted for various biological detection systems; the biotin-modified PDA sensor developed in this study has enormous potentials for the development of various colorimetric biosensors.     

Interaction between biotin lipids and streptavidin in monolayers: formation of oriented two-dimensional protein domains induced by surface recognition

Highly specific ligand-receptor interactions generally characterize surface recognition reactions. Such processes can be simulated by streptavidin-biotin-specific binding. Biotin lipids have thus been synthesized, and their interaction with streptavidin (or avidin) at the air-water interface was directly shown by measurement of surface pressure isotherms and fluorescence microscopy. These proteins interact with the biotin lipid monolayer via specific binding or nonspecific adsorption. Both phenomena were clearly distinguished by use of the inactivated form of streptavidin. The binding of fluorescein-labeled streptavidin to monolayers was also directly observed by fluorescence microscopy. The fluorescence of the protein domains is directly related to the state of polarization of the exciting light. This anisotropy can only be explained by the formation of oriented two-dimensional biotin lipid-streptavidin domains.     

Development and characterization of a series of soluble tetrameric and monomeric streptavidin muteins with differential biotin binding affinities

The strong biotin-streptavidin interaction limits the application of streptavidin as a reversible affinity matrix for purification of biotinylated biomolecules. To address this concern, a series of single, double, and triple streptavidin muteins with different affinities to biotin were designed. The strategy involves mutating one to three strategically positioned residues (Ser-45, Thr-90, and Asp-128) that interact with biotin and other framework structure-maintaining residues of streptavidin. The muteins were produced in soluble forms via secretion from Bacillus subtilis. The impact of individual residues on the overall structure of streptavidin is reflected by the formation of monomeric streptavidin to different extents. Of the three targeted residues, Asp-128 has the most dramatic effect (Asp-128 > Thr-90 > Ser-45). Conversion of all three targeted residues to alanine results in a soluble biotin binding mutein that exists 100% in the monomeric state. Both wild-type and mutated (monomeric and tetrameric) streptavidin proteins were purified, and their kinetic parameters (on- and off-rates) were determined using a BIAcore biosensor with biotin-conjugated bovine serum albumin immobilized to the sensor chip. This series of muteins shows a wide spectrum of affinity toward biotin (K(d) from 10(-6) to 10(-11) m). Some of them have the potential to serve as reversible biotin binding agents.     

Novel biosensor system model based on fluorescence quenching by a fluorescent streptavidin and carbazole‐labeled biotin

In the present study, a novel molecular biosensor system model was designed by using a couple of the fluorescent unnatural mutant streptavidin and the carbazole‐labeled biotin. BODIPY‐FL‐aminophenylalanine (BFLAF), a fluorescent unnatural amino acid was position‐specifically incorporated into Trp120 position of streptavidin by four‐base codon method. On the other hand, carbazole‐labeled biotin was synthesized as a quencher for the fluorescent Trp120BFLAF mutant streptavidin. The fluorescence of fluorescent Trp120BFLAF mutant streptavidin was decreased as we expected when carbazole‐labeled biotin was added into the mutant streptavidin solution. Furthermore, the fluorescence decrease of Trp120BFLAF mutant streptavidin with carbazole‐labeled biotin (100 nM) was recovered by the competitive addition of natural biotin. This result demonstrated that by measuring the fluorescence quenching and recovery, a couple of the fluorescent Trp120BFLAF mutant streptavidin and the carbazole‐labeled biotin were successfully applicable for quantification of free biotin as a molecular biosensor system. Copyright © 2016 John Wiley & Sons, Ltd.     

X-ray crystallographic studies of streptavidin mutants binding to biotin

On the basis of high resolution crystallographic studies of streptavidin and its biotin complex, three principal binding motifs have been identified that contribute to the tight binding. A flexible binding loop can undergo a conformational change from an open to a closed form when biotin is bound. Additional studies described here of unbound wild-type streptavidin have provided structural views of the open conformation. Several tryptophan residues packing around the bound biotin constitute the second binding motif, one dominated by hydrophobic interactions. Mutation of these residues to alanine or phenylalanine have variable effects on the thermodynamics and kinetics of binding, but they generate only small changes in the molecular structure. Hydrogen bonding interactions also contribute significantly to the binding energetics of biotin, and the D128A mutation which breaks a hydrogen bond between the protein and a ureido NH group results in a significant structural alteration that could mimic an intermediate on the dissociation pathway. In this review, we summarize the structural aspects of biotin recognition that have been gained from crystallographic analyses of wild-type and site-directed streptavidin mutants.     

Application of polymer-embedded proteins to fabrication of DNA array

A plasma-polymerized film (PPF) of hexamethyldisiloxane [HMDS; (CH(3))(3)SiOSi(CH(3))(3)] was used to immobilize streptavidin on a glass substrate. Another layer of HMDS-PPF was also applied to the protein, which was first adsorbed to an underlayer of the same kind of film. As the result, the streptavidin was "embedded" between the two layers of HMDS, whereby biotinylated molecules could be efficiently captured. The second layer of approximately 30 to 45 A PPF was sufficient to allow the binding of biotinylated molecules, whereas thicknesses of >90 A significantly hindered the streptavidin-biotin interactions. Fluorescence analysis revealed that the absence of an HMDS plasma-polymer (HMDS-PP) layer on either side of the streptavidin film resulted in a decrease in biotin binding. This immobilization technique was used to bind biotinylated oligonucleotides in sequence-specific DNA-DNA interactions. The hydrophobic properties of the plasma-polymerized HMDS thin film acted to minimize nonspecific DNA binding to the glass substrate. A DNA array was fabricated using this procedure and showed greatly decreased nonspecific DNA binding compared with a poly-L-lysine coated substrate.     

Biotin IgM Antibodies in Human Blood: A Previously Unknown Factor Eliciting False Results in Biotinylation-Based Immunoassays

Biotin is an essential vitamin that binds streptavidin or avidin with high affinity and specificity. As biotin is a small molecule that can be linked to proteins without affecting their biological activity, biotinylation is applied widely in biochemical assays. In our laboratory, IgM enzyme immuno assays (EIAs) of μ-capture format have been set up against many viruses, using as antigen biotinylated virus like particles (VLPs) detected by horseradish peroxidase-conjugated streptavidin. We recently encountered one serum sample reacting with the biotinylated VLP but not with the unbiotinylated one, suggesting in human sera the occurrence of biotin-reactive antibodies. In the present study, we search the general population (612 serum samples from adults and 678 from children) for IgM antibodies reactive with biotin and develop an indirect EIA for quantification of their levels and assessment of their seroprevalence. These IgM antibodies were present in 3% adults regardless of age, but were rarely found in children. The adverse effects of the biotin IgM on biotinylation-based immunoassays were assessed, including four inhouse and one commercial virus IgM EIAs, showing that biotin IgM do cause false positivities. The biotin can not bind IgM and streptavidin or avidin simultaneously, suggesting that these biotin-interactive compounds compete for the common binding site. In competitive inhibition assays, the affinities of biotin IgM antibodies ranged from 2.1×10(-3) to 1.7×10(-4 )mol/L. This is the first report on biotin antibodies found in humans, providing new information on biotinylation-based immunoassays as well as new insights into the biomedical effects of vitamins.     

Cooperative biotin binding by streptavidin. Electrophoretic behavior and subunit association of streptavidin in the presence of 6 M urea

We describe the cooperativity in the biotin binding of streptavidin. We have developed an electrophoretic method which can separate streptavidin molecules with bound biotin from those without biotin. In 6 M urea, the electrophoretic mobility of streptavidin in polyacrylamide gels becomes significantly faster upon biotin binding. When streptavidin was titrated with biotin, only two major bands were observed on the gel, consisting of streptavidin molecules without bound biotin and those saturated with biotin. The change in mobility is due partly to the negative charge of the bound biotin, but it must reflect conformational changes of the protein molecule associated with biotin binding. Gel filtration chromatography showed that the streptavidin molecule dissociates into two subunit dimers in the presence of 6 M urea. These results suggest that the biotin binding by the streptavidin subunit dimer is cooperative and that some communication must exist between the two subunits.     

Engineering soluble monomeric streptavidin with reversible biotin binding capability

Monomeric streptavidin with reversible biotin binding capability has many potential applications. Because a complete biotin binding site in each streptavidin subunit requires the contribution of tryptophan 120 from a neighboring subunit, monomerization of the natural tetrameric streptavidin can generate streptavidin with reduced biotin binding affinity. Three residues, valine 55, threonine 76, and valine 125, were changed to either arginine or threonine to create electrostatic repulsion and steric hindrance at the interfaces. The double mutation (T76R,V125R) was highly effective to monomerize streptavidin. Because interfacial hydrophobic residues are exposed to solvent once tetrameric streptavidin is converted to the monomeric state, a quadruple mutein (T76R,V125R,V55T,L109T) was developed. The first two mutations are for monomerization, whereas the last two mutations aim to improve hydrophilicity at the interface to minimize aggregation. Monomerization was confirmed by four different approaches including gel filtration, dynamic light scattering, sensitivity to proteinase K, and chemical cross-linking. The quadruple mutein remained in the monomeric state at a concentration greater than 2 mg/ml. Its kinetic parameters for interaction with biotin suggest excellent reversible biotin binding capability, which enables the mutein to be easily purified on the biotin-agarose matrix. Another mutein (D61A,W120K) was developed based on two mutations that have been shown to be effective in monomerizing avidin. This streptavidin mutein was oligomeric in nature. This illustrates the importance in selecting the appropriate residues and approaches for effective monomerization of streptavidin.     

Artifactual detection of biotin on histones by streptavidin

Biotinylation is a recent addition to the list of reported posttranslational modifications made to histones. Holocarboxylase synthetase (HCS) and biotinidase have been implicated as biotinylating enzymes. However, the details of the mechanism and the regulation of biotin transfer on and off histones remains unclear. Here we report that in a cell culture system low biotin availability reduces biotinylation of carboxylases, yet apparent biotinylation of histones is unaffected. This is despite biotin depletion having detrimental effects on cell viability and proliferation. Further analysis of the widely used method for detecting biotin on histones, streptavidin blotting, revealed that streptavidin interacts with histones independently of biotin binding. Preincubation of streptavidin with free biotin reduced binding to biotinylated carboxylases but did not block binding to histones. To investigate biotinylation of histones using an alternative detection method independent of streptavidin, incorporation of 14C biotin into biotinylated proteins was analyzed. Radiolabeled biotin was readily detectable on carboxylases but not on histones, implying very low levels of biotin in the nucleus attached to histone proteins (< 0.03% biotinylation). In conclusion, we would caution against the use of streptavidin for investigating histone biotinylation.     

Thermodynamic and structural consequences of flexible loop deletion by circular permutation in the streptavidin-biotin system.

A circularly permuted streptavidin (CP51/46) has been designed to remove the flexible polypeptide loop that undergoes an open to closed conformational change when biotin is bound. The original termini have been joined by a tetrapeptide linker, and four loop residues have been removed, resulting in the creation of new N- and C-termini. Isothermal titration calorimetric studies show that the association constant has been reduced approximately six orders of magnitude below that of wild-type streptavidin to 10(7) M(-1). The deltaH degrees of biotin association for CP51/46 is reduced by 11.1 kcal/mol. Crystal structures of CP51/46 and its biotin complex show no significant alterations in the binding site upon removal of the loop. A hydrogen bond between Ser45 and Ser52 found in the absence of biotin is broken in the closed conformation as the side-chain hydroxyl of Ser45 moves to hydrogen bond to a ureido nitrogen of biotin. This is true in both the wild-type and CP51/46 forms of the protein, and the hydrogen bonding interaction might thus help nucleate closure of the loop. The reduced entropic cost of binding biotin to CP51/46 is consistent with the removal of this loop and a reduction in entropic costs associated with loop closure and immobilization. The reduced enthalpic contribution to the free energy of binding is not readily explainable in terms of the molecular structure, as the binding contacts are nearly entirely conserved, and only small differences in solvent accessible surfaces are observed relative to wild-type streptavidin.     

High resolution structure of streptavidin in complex with a novel high affinity peptide tag mimicking the biotin binding motif

A novel peptide was designed which possesses nanomolar affinity of less than 20 nM for streptavidin. Therefore it was termed Nano-tag and has been used as an affinity tag for recombinant proteins. The minimized version of the wild type Nano-tag is a seven-amino acid peptide with the sequence fMDVEAWL. The three-dimensional structure of wild type streptavidin in complex with the minimized Nano-tag was analyzed at atomic resolution of 1.15 A and the details of the binding motif were investigated. The peptide recognizes the same pocket of streptavidin where the natural ligand biotin is bound, but the peptide requires significantly more space than biotin. Therefore the binding loop adopts an "open" conformation in order to release additional space for the peptide. The conformation of the bound Nano-tag corresponds to a 3(10) helix. However, the analysis of the intermolecular interactions of the Nano-tag with residues of the binding pocket of streptavidin reveals astonishing similarities to the biotin binding motif. In principle the three-dimensional conformation of the Nano-tag mimics the binding mode of biotin. Our results explain why the use of the Nano-tag in fusion with recombinant proteins is restricted to their N-terminus and we describe the special significance of the fMet residue for the high affinity binding mode.     

A monovalent streptavidin with a single femtomolar biotin binding site

Streptavidin and avidin are used ubiquitously because of the remarkable affinity of their biotin binding, but they are tetramers, which disrupts many of their applications. Making either protein monomeric reduces affinity by at least 10(4)-fold because part of the binding site comes from a neighboring subunit. Here we engineered a streptavidin tetramer with only one functional biotin binding subunit that retained the affinity, off rate and thermostability of wild-type streptavidin. In denaturant, we mixed a streptavidin variant containing three mutations that block biotin binding with wild-type streptavidin in a 3:1 ratio. Then we generated monovalent streptavidin by refolding and nickel-affinity purification. Similarly, we purified defined tetramers with two or three biotin binding subunits. Labeling of site-specifically biotinylated neuroligin-1 with monovalent streptavidin allowed stable neuroligin-1 tracking without cross-linking, whereas wild-type streptavidin aggregated neuroligin-1 and disrupted presynaptic contacts. Monovalent streptavidin should find general application in biomolecule labeling, single-particle tracking and nanotechnology.     

Characterization of low affinity Fcγ receptor biotinylation under controlled reaction conditions by mass spectrometry and ligand binding analysis

Chemical protein biotinylation and streptavidin or anti‐biotin‐based capture is regularly used for proteins as a more controlled alternative to direct coupling of the protein on a biosensor surface. On biotinylation an interaction site of interest may be blocked by the biotin groups, diminishing apparent activity of the protein. Minimal biotinylation can circumvent the loss of apparent activity, but still a binding site of interest can be blocked when labeling an amino acid involved in the binding. Here, we describe reaction condition optimization studies for minimal labeling. We have chosen low affinity Fcγ receptors as model compounds as these proteins contain many lysines in their active binding site and as such provide an interesting system for a minimal labeling approach. We were able to identify the most critical parameters (protein:biotin ratio and incubation pH) for a minimal labeling approach in which the proteins of choice remain most active toward analyte binding. Localization of biotinylation by mass spectrometric peptide mapping on minimally labeled material was correlated to protein activity in binding assays. We show that only aiming at minimal labeling is not sufficient to maintain an active protein. Careful fine‐tuning of critical parameters is important to reduce biotinylation in a protein binding site.     

Genetic engineering of streptavidin,a versatile affinity tag

Streptavidin, a tetrameric protein produced by Streptomyces avidinii, has been used as a useful, versatile affinity tag in a variety of biological applications. The efficacy of streptavidin is derived from its extremely high binding affinity for the vitamin biotin. For the last several years, we have used genetic engineering as a primary means to enhance the properties of streptavidin and to expand the application of streptavidin as an affinity tag. In this review, we describe several genetically engineered streptavidin variants, which include a streptavidin with a reduced biotin-binding affinity, a dimeric streptavidin, and a fusion protein between streptavidin and protein A, along with their potential applications in biological science.     

Structural studies of the streptavidin binding loop.

The streptavidin-biotin complex provides the basis for many important biotechnological applications and is an interesting model system for studying high-affinity protein-ligand interactions. We report here crystallographic studies elucidating the conformation of the flexible binding loop of streptavidin (residues 45 to 52) in the unbound and bound forms. The crystal structures of unbound streptavidin have been determined in two monoclinic crystal forms. The binding loop generally adopts an open conformation in the unbound species. In one subunit of one crystal form, the flexible loop adopts the closed conformation and an analysis of packing interactions suggests that protein-protein contacts stabilize the closed loop conformation. In the other crystal form all loops adopt an open conformation. Co-crystallization of streptavidin and biotin resulted in two additional, different crystal forms, with ligand bound in all four binding sites of the first crystal form and biotin bound in only two subunits in a second. The major change associated with binding of biotin is the closure of the surface loop incorporating residues 45 to 52. Residues 49 to 52 display a 3(10) helical conformation in unbound subunits of our structures as opposed to the disordered loops observed in other structure determinations of streptavidin. In addition, the open conformation is stabilized by a beta-sheet hydrogen bond between residues 45 and 52, which cannot occur in the closed conformation. The 3(10) helix is observed in nearly all unbound subunits of both the co-crystallized and ligand-free structures. An analysis of the temperature factors of the binding loop regions suggests that the mobility of the closed loops in the complexed structures is lower than in the open loops of the ligand-free structures. The two biotin bound subunits in the tetramer found in the MONO-b1 crystal form are those that contribute Trp 120 across their respective binding pockets, suggesting a structural link between these binding sites in the tetramer. However, there are no obvious signatures of binding site communication observed upon ligand binding, such as quaternary structure changes or shifts in the region of Trp 120. These studies demonstrate that while crystallographic packing interactions can stabilize both the open and closed forms of the flexible loop, in their absence the loop is open in the unbound state and closed in the presence of biotin. If present in solution, the helical structure in the open loop conformation could moderate the entropic penalty associated with biotin binding by contributing an order-to-disorder component to the loop closure.     

Bioluminescent assays using glucose-6-phosphate dehydrogenase: application to biotin and streptavidin detection

A streptavidin-glucose-6-phosphate dehydrogenase (G6PDH) conjugate was synthesized and its properties were studied, along with those of biotin-G6PDH conjugates. Two bioluminescent assays were used. Streptavidin was assayed in two steps: streptavidin samples were first incubated with a small amount of biotin-G6PDH and then with biotinylated rabbit gamma-globulins. The complex was immobilized on a bioluminescent immunoadsorbent. In the single-step biotin assay, free biotin was allowed to compete with biotin linked to rabbit gamma-globulins for binding to streptavidin-G6PDH in the presence of the bioluminescent immunoadsorbent. Neither assay required washing or separation steps and the sensitivity was 0.2 ng for streptavidin and 100 fg for biotin. Different applications are described: studies of biotin reactivity when linked to probes in solution or immobilized, and quantitation of biotin in biotinylated DNA probes and oligonucleotides.     

Engineering of a Bacillus subtilis strain with adjustable levels of intracellular biotin for secretory production of functional streptavidin

Streptavidin is a biotin-binding protein which has been widely used in many in vitro and in vivo applications. Because of the ease of protein recovery and availability of protease-deficient strains, the Bacillus subtilis expression-secretion system is an attractive system for streptavidin production. However, attempts to produce streptavidin using B. subtilis face the problem that cells overproducing large amounts of streptavidin suffer poor growth, presumably because of biotin deficiency. This problem cannot be solved by supplementing biotin to the culture medium, as this will saturate the biotin binding sites in streptavidin. We addressed this dilemma by engineering a B. subtilis strain (WB800BIO) which overproduces intracellular biotin. The strategy involves replacing the natural regulatory region of the B. subtilis chromosomal biotin biosynthetic operon (bioWAFDBIorf2) with an engineered one consisting of the B. subtilis groE promoter and gluconate operator. Biotin production in WB800BIO is induced by gluconate, and the level of biotin produced can be adjusted by varying the gluconate dosage. A level of gluconate was selected to allow enhanced intracellular production of biotin without getting it released into the culture medium. WB800BIO, when used as a host for streptavidin production, grows healthily in a biotin-limited medium and produces large amounts (35 to 50 mg/liter) of streptavidin, with over 80% of its biotin binding sites available for future applications.     

Self-assembly of bivalent protein-binding agents based on oligonucleotide-linked organic fragments

A library of bidentate fragments linked through an oligonucleotide duplex was tested for binding to streptavidin. When one fragment was biotin, only biotin-containing duplexes were selected by streptavidin but when heated above the melting temperature, only bidentate biotin ligands were obtained. Thermal denaturation experiments showed that the melting temperature, thus stability, of the monodentate versus bidentate binding ligand increased from 59 to 71 degrees C in the presence of streptavidin. Substituting biotin with 2-iminobiotin led to the exclusion of all other duplexes by the bidentate iminobiotin duplex in binding streptavidin.     

Analysis of recombinant protein expression using localized surface plasmon resonance (LSPR)

The localized surface plasmon resonance (LSPR)-based optical biosensor using nano-structures of noble metals has been considered as a useful tool for label-free detection of DNA hybridization and protein-protein interactions. We fabricated LSPR-based optical biosensors using gold nano-islands (nominal thickness; 75 A) on glass substrates that were easily made using the conventional fabrication methods. The formation of gold nano-islands on glass substrates was realized by heat treatment of thin gold film deposited with a low deposition rate (approximately 0.05 A/s). The morphologies of sensor surfaces composed of gold nano-islands were observed using an atomic force microscope (AFM) with a non-contact mode. To investigate the sensing capacity of the gold nano-island sensor for the binding of proteins by affinity interactions, the streptavidin and biotin interaction was used as a model system. In addition, detection of recombinant glutathione-S-transferase (GST)-tagged human interleukin-6 (hIL6) expressed in Escherichia coli was carried out by LSPR. It is expected that the LSPR sensors composed of gold nano-islands can be an alternative to traditional methods such as SDS-polyacrylamide gel electrophoresis (SDS-PAGE) for fast analysis of protein expression.