Single-step electroelution of proteins from SDS-polyacrylamide gels and immobilization on diisothiocyanate-glass beads in prepacked capillary columns for solid-phase microsequencing

A new method for immobilization of proteins purified by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) prior to sequencing is described. It utilizes a simple apparatus that permits the simultaneous electroelution of proteins from gel slices and attachment to diisothiocyanate-activated glass beads prepacked in capillary tubes [S-P. Liang and R. A. Laursen, Anal. Biochem. 188, 366-373 (1990)]. Transfer/attachment yields of greater than 80% within 90 min were observed for several 125I-labeled proteins with a range of molecular weights using 0.2 M sodium phosphate (pH 8.9) buffer containing 0.1% SDS. The method has the advantage of high capacity, relative simplicity, and insensitivity to the presence of SDS and Coomassie blue stain. The highest transfer yields were obtained when proteins were run on gels which had been aged for at least 12 h. For 100- to 1000-pmol samples, the sequenceable amount of protein, including transfer, was generally 30-60%, with an average repetitive yield of 95%. Factors which influence sample recovery and sequencing yield are discussed.     

Fluorography--limitations on its use for the quantitative detection of 3H- and 14C-labeled proteins in polyacrylamide gels

The suitability of fluorography for the detection of 3H- and 14C-labeled proteins on polyacrylamide gradient gels has been investigated. It was found that the absorbance of the fluorographic film image produced by a given level of radioactivity decreased as the acrylamide concentration in the gel increased. The use of Coomassie brilliant blue protein dyes to stain the gel prior to fluorography reduced the absorbance of the fluorographic image. It is concluded that quantitative fluorography can only be applied to unstained gels of a uniform acrylamide concentration.     

Western blots using stained protein gels.

A general method is described for the electrophoretic transfer of proteins from stained gels to membranes and subsequent Western detection of specific proteins on the stained membranes. Proteins are separated by sodium dodecyl sulfate polyacrylamide gel electrophoresis, and the gels are stained using either of two different methods followed by electrophoretic transfer to nitrocellulose or Immobilon-P membranes. The transferred proteins remain stained during immunodetection, providing a set of background markers for protein location and size determination.     

Manual N-terminal microsequencing of proteins electroeluted from polyacrylamide gel slices

A simple and rapid procedure for preparation of proteins for manual microsequencing using sodium dodecyl sulfate gel electrophoresis is described. The procedure involves pre-electrophoretic labeling of the protein amino groups with a coloured Edman reagent, disk electrophoresis for purification or fractionation of the proteins, and reversed electrophoretic transfer of the separated protein from gel slices into a small volume of buffer (100 to 150 microliter) using a discontinuous conductivity gradient to recover the proteins. The pre-electrophoretic labeling facilitates location of the separated proteins in the gel and the monitoring of their complete electroelution. The isolated proteins are separated from excess of salts by acetone precipitation and solvent partitioning in pyridine/water (1:1) and subjected to manual DABITC/PITC degradation.     

The instantaneous monitoring of polyacrylamide gels during electrophoresis.

The advantages of being able to see protein zones in a gel during electrophoresis (and hence before staining) are pointed out, and a method is described which depends on local increments of refractive index in these zones. The use of local increments of refractive index in polyacrylamide gels for measuring protein concentrations in zones during electrophoresis is briefly considered; it is found that such increments are greater than would be expected from the amount of protein when sodium dodecyl sulphate is present. The enhancement depends on conditions and time of running. This makes quantitative estimates difficult, but the sensitivity of detection of protein zones by observations based on refractive-index changes is greatly increased by this property of sodium dodecyl sulphate. Methods are described for making optically uniform gels (both with uniform and with graded concentrations of polyacrylamide), necessary for observation of small changes in refractive index. A simple dark-field system of observation is described. Examples are given showing protein samples observed with the system during electrophoresis and compared with the same gel stained with Coomassie Blue after completion of the run. Under optimal conditions the optical method is comparable in sensitivity with staining. With the proteins of lower mol.wt. (approx. 15000), the optical method is not so sensitive, becoming less sensitive with longer running time. This loss of sensitivity is greatly decreased by using more concentrated polyacrylamide gels, and graded gels are therefore more suitable for optical observation than are uniform gels. The observation of protein zones during electrophoresis adds nothing to the time needed for making a stained gel and gives much information long before it can be obtained from the stained gel.     

Two methods for electrophoretic elution of proteins from polyacrylamide gels.

An apparatus is described which improves an earlier technique for eluting proteins from polyacrylamide-gel slabs by electrophoresis against a sucrose gradient. Another elution method where the components are concentrated electrophoretically in a collodion bag by altering the current density is described. This method enables the elution of small amounts of sample, free from disturbing background material arising from the gel, and also permits subsequent dialysis and ultrafiltration without transfer losses. It can be used with alkaline and acidic buffers and has been applied in the purification of human pituitary thyrotropin (TSH).     

Extraction of proteins for sodium dodecyl sulfate-polyacrylamide gel electrophoresis from protease-rich plant tissues

A method of extracting proteins for sodium dodecyl sulfate-polyacrylamide gel electrophoresis from plant tissues with high protease activity was described. It resolved protein bands in highmolecular-weight regions of the gel and replaced commonly used procedures which showed severe degradation of proteins, even in the presence of protease inhibitors.     

Separation of gliadin at pH 3.1 in a polyacrylamide gel suitable for blotting procedures

A polyacrylamide gel electrophoresis system for the separation of gliadin at acidic pH is described. The gel is cast at neutral pH with polymerization in 20 min. Equilibrium of the gel to pH 3.1 takes place during the electrophoresis. The gel is highly uniform with good mechanical properties and therefore suitable for blotting procedures.     

Parallel plate equipment for preparation of uniform gel sheets

A method for the preparation of uniform gel-disks for enzyme and cell immobilisation, as well as for characterisation of gel mechanical stability, is described. The apparatus comprises a stainless steel base unit and glass parallel plates, designed to permit easy and fast production of multiple homogeneous gel sheets of variable thickness.     

Transfer of silver-stained proteins from polyacrylamide gels to polyvinylidene difluoride membranes.

We have developed a method to transfer proteins from a silver-stained polyacrylamide gel to a polyvinylidene difluoride (Immobilon-P) transfer membrane (Millipore, Bedford, MA). If the silver stained gels are rinsed in 2 x SDS Laemmli sample buffer prior to transfer, almost all proteins can be transferred comparably to non-stained controls. Some proteins stained with silver can be directly transfer, almost all proteins can be transferred comparably to non-stained controls. Some proteins stained with silver can be directly transferred to a single sheet of Immobilon-P without a prior rinse in sample buffer. Most important in the Western blot the antigenicity of the transferred protein is retained in either way. The method described is simple, inexpensive and versatile. A slight modification of the technique permits one to extract minor proteins, or detect their antigenic activities, without contamination of contiguous proteins.     

Efficient transfer of proteins from acetic acid-urea and isoelectric-focusing gels to nitrocellulose membrane filters with retention of protein antigenicity

A method which facilitates the rapid and quantitative electrophoretic transfer of proteins from gels not containing sodium dodecyl sulfate (SDS) to nitrocellulose membranes is described. The equilibration of non-SDS-polyacrylamide gel electrophoretic gels in a buffer containing SDS confers a net negative charge to the proteins present, presumably as a result of the formation of SDS-protein complexes. Proteins from gels equilibrated in the SDS buffer and then electroblotted in a Tris-glycine buffer at pH 8.3 are transferred with much greater efficiency than are proteins from untreated gels. The method has been shown to significantly enhance the electrophoretic transfer of polyoma viral proteins resolved in either acetic acid-urea or isoelectric-focusing gels to nitrocellulose membranes, and it is suggested that the method should have universal applicability to all gel electrophoresis systems currently employed. The proteins from isoelectric-focusing gels treated with SDS and transferred to nitrocellulose membranes were found to retain antigenicity to antisera prepared against either denatured or native viral proteins.     

A new approach for on-line enrichment in electrophoresis of dilute protein solutions

A method is described for on-line enrichment/zone sharpening of a sample of negatively charged proteins (an analogous method for cationic proteins can be designed). The sample is applied on the top of a 5-mm thick layer of a neutral polyacrylamide gel which rests on another 5-mm thick, large-pore polyacrylamide gel which contains positively charged groups. The latter gel layer is attached to the neutral gel column, used for the electrophoretic separation of the proteins. When a voltage is applied the proteins start migrating and become electrostatically adsorbed at the top of the charged, large-pore gel layer (pH 5.4). With the upper electrode vessel filled with a buffer of a pH higher (pH 7.7) than that employed in the enrichment step and with a voltage between the electrodes, these enriched proteins are released (because the enrichment gel is non-charged at pH 7.7) with zone sharpening and migrate into the 5-cm long column (i.d. 5 mm) of a neutral, large-pore polyacrylamide gel for electrophoretic analysis. Upon the electrophoretic migration from the enrichment gel into the separation gel a second zone sharpening may occur, if the increase in pH from 5.4 to 7.7 in the separation gel is not close to momentary. By employing colored test proteins the efficiency of the enrichment step is visually illustrated by a picture. The principle of the concentration method described has been employed also in chromatographic experiments and can with appropriate modifications also be used in other electrophoretic methods, such as capillary electrophoresis.     

Apparatus and method for preparative gel electrophoresis

A new apparatus for preparative gel electrophoresis with continuous elution which includes a miniaturized electrode and elution chamber system is described. The design provides high resolution, high yield, applicability for small and large amounts of peptide material, and easy operation. Furthermore, the apparatus enables a very accurate gel column or gel gradient to be formed. A method for preparative gel electrophoresis in sodium dodecyl sulfate which allows the purification of peptides and proteins without concurrently modifying tryptophane residues or blocking N-terminal α-amino groups is also described.     

Fast electrotransfer of human serum proteins in their native state from polyacrylamide thin gradient gels reinforced by textiles to polyvinylidene difluoride membranes. Rapid electrotransfer from thin gradient gels reinforced by textiles.

A fast electroblotting technique of native molecules electrophoretically separated in thin (0.25 to 0.5 mm) gradient gels, onto a high capacity membrane of polyvinylidene difluoride is described. Omitting methanol during transfer, the equilibration step is avoided and the same buffer is used in electrophoresis and transfer. As the gel reinforced by fabric never swells nor shrinks, and as all the bands are blotted, the transfer matrix exactly reflects the protein pattern of the original gel. Autoradiography is enhanced and electroelution is homogeneous in all parts of the gels. Significant improvement is noticed in binding proteins of molecular weight from about 20 kDa to more than 700 kDa, as suggested by complete electroelution of all native serum components.     

A nondenaturing vertical isoelectric focusing polyacrylamide slab gel system suitable for silver staining and electrophoretic blotting

We have devised a nondenaturing vertical isoelectric focusing (IEF)-polyacrylamide gel electrophoresis (PAGE) system which is amenable to silver staining and electroblotting. Apart from being accessible, inexpensive, and simple to use, this new methodology overcomes problems inherent in current IEF methods, for example, pH gradient drift, nonuniform cooling, restricted sample volume, and inability to perform electroblotting. Two photopolymerization gel formulas were derived: a 5% acrylamide formula using bisacrylamide (Bis) as the crosslinker and a 6% acrylamide formula using diallyltartdiamide (DATD) as the crosslinker. The 5% acrylamide Bis gel gave excellent resolution and separation of proteins whereas the 6% acrylamide DATD gel expanded slightly during silver staining, resulting in mild band distortions. At least 80 ng of protein per band could be detected by the silver staining protocol devised. Both the DATD and the Bis gels were suitable for electroblot transfer. Parameters to ensure the optimum conditions for reproducible, high resolution vertical IEF-PAGE are described. IEF-PAGE silver staining and electroblotting procedures and silver staining of the nitrocellulose electroblot procedures are also described. The advantages of this methodology over previously published methods are discussed.     

A stain for iron-containing proteins sensitive to nanogram levels of iron

A method for staining iron proteins on polyacrylamide gel electropherograms is described. It is based upon catalysis, by iron, of the oxidation of diaminobenzoic acid by hydrogen peroxide. Bands containing as little as 5 ng of protein-bound iron can be visualized by this method.     

Protein array staining methods for undefined protein content, manufacturing quality control, and performance validation

Methods to assess the quality and performance of protein microarrays fabricated from undefined protein content are required to elucidate slide-to-slide variability and interpolate resulting signal intensity values after an interaction assay. We therefore developed several simple total- and posttranslational modification-specific, on-chip staining methods to quantitatively assess the quality of gel element protein arrays manufactured with whole-cell lysate in vitro protein fractions derived from two-dimensional liquid-phase fractionation (PF2D) technology. A linear dynamic range of at least 3 logs was observed for protein stains and immobilized protein content, with a lower limit of detection at 8 pg of protein per gel element with Deep Purple protein stain and a field-portable microarray imager. Data demonstrate the successful isolation, separation, transfer, and immobilization of putative transmembrane proteins from Yersinia pestis KIM D27 with the combined PF2D and gel element array method. Internal bovine serum albumin standard curves provided a method to assess on-chip PF2D transfer and quantify total protein immobilized per gel element. The basic PF2D array fabrication and quality assurance/quality control methods described here therefore provide a standard operating procedure and basis for developing whole-proteome arrays for interrogating host-pathogen interactions, independent of sequenced genomes, affinity tags, or a priori knowledge of target cell composition.     

An electroblotting apparatus for multiple replica technique and identification of human serum proteins on micro two-dimensional gels

A new apparatus for electrophoretic transfer of proteins from micro polyacrylamide slab gels has been developed. The apparatus enabled the easy changing of nitrocellulose sheets and was suited for obtaining multiple blots from a gel. Electrophoretic conditions were determined so that all of the blots obtained sequentially from one slab gel were successfully used to visualize specific proteins irrespective of their molecular weight. Combining the transfer technique with the technique of parallel micro two-dimensional electrophoresis, 20 blots could be obtained within 1 h of electroblotting time. The locations of 28 human serum proteins were determined simultaneously on these blots using commercial specific antisera.     

A rapid assay for assessment of sphingosine kinase inhibitors and substrates

The effect of incorporating carbon nanotubes (CNTs) in the gel matrix on the electrophoretic mobility of proteins based on their molecular weight differences was investigated using sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS–PAGE). More specifically, a reduction in standard deviation in the molecular weight calibration plots by 55% in the case of multiwalled carbon nanotubes (MWCNTs) and by 34% in the case of single-walled carbon nanotubes (SWCNTs) compared with that of pristine polyacrylamide gels was achieved after incorporating an insignificant amount of functionalized CNTs into the gel matrix. A mechanism based on a more uniform pore size distribution in CNT modified polyacrylamide gel matrix is proposed. Furthermore, the impact of SWCNTs and MWCNTs on the mobility of proteins in different molecular weight regimes at a given acrylamide concentration offers a tunable gel matrix in terms of the selection of molecular weight ranges of proteins. The robustness and excellent reproducibility of the CNT–PAGE protocol are expected to have a significant impact on the molecular weight determination of newly isolated proteins.