Biochemical kinetic characterization of the Acanthamoeba myosin-I ATPase

Acanthamoeba myosin-IA and myosin-IB are single-headed molecular motors that may play an important role in membrane-based motility. To better define the types of motility that myosin-IA and myosin IB can support, we determined the rate constants for key steps on the myosin-I ATPase pathway using fluorescence stopped-flow, cold-chase, and rapid-quench techniques. We determined the rate constants for ATP binding, ATP hydrolysis, actomyosin-I dissociation, phosphate release, and ADP release. We also determined equilibrium constants for myosin-I binding to actin filaments, ADP binding to actomyosin-I, and ATP hydrolysis. These rate constants define an ATPase mechanism in which (a) ATP rapidly dissociates actomyosin-I, (b) the predominant steady-state intermediates are in a rapid equilibrium between actin-bound and free states, (c) phosphate release is rate limiting and regulated by heavy- chain phosphorylation, and (d) ADP release is fast. Thus, during steady- state ATP hydrolysis, myosin-I is weakly bound to the actin filament like skeletal muscle myosin-II and unlike the microtubule-based motor kinesin. Therefore, for myosin-I to support processive motility or cortical contraction, multiple myosin-I molecules must be specifically localized to a small region on a membrane or in the actin-rich cell cortex. This conclusion has important implications for the regulation of myosin-I via localization through the unique myosin-I tails. This is the first complete transient kinetic characterization of a member of the myosin superfamily, other than myosin-II, providing the opportunity to obtain insights about the evolution of all myosin isoforms.     

Pre-steady state kinetic studies on H(+)-ATPase from Candida albicans.

The mechanism of ATP hydrolysis by plasma membrane H(+)-ATPase from Candida albicans has been investigated by following the kinetics of H(+) liberation/absorption and the UV difference spectrum in a stopped flow spectrophotometer. A distinct pre-steady state phase of ATP hydrolysis could be defined. While the rapid mixing of P(i) and ATPase produced no transient pH changes, the mixing of ADP leads to the release of 1 H(+) per molecule of ATPase. Rapid mixing of ATP with ATPase releases about 2 H(+) per molecule of ATPase, of which around 1.3 H(+) are reabsorbed. The magnitudes of both H(+) release and absorption were found to be independent of ATP concentration. The rate of H(+) release (k(f)) shows ATP dependence while the rate of H(+) absorption is independent of ATP concentration. The rate of H(+) liberation with ADP, on a concentration basis, was far less as compared with ATP, indicating a low affinity of the ATPase for ADP. No change in the difference spectrum was observed with ADP. The stoichiometry of ATP binding to PM-ATPase was found to be unity from UV-difference spectrum studies. The k(f) values for H(+) release and for the appearance of a difference spectrum following the addition of ATP were found to be similar beyond a 1:1 ratio of ATP:ATPase. The results obtained lead us to propose a 4-step kinetic scheme for the mechanism of ATP hydrolysis.     

The kinetic mechanism of Myo1e (human myosin-IC)

Myo1e is the widely expressed subclass-1 member of the myosin-I family. We performed a kinetic analysis of a truncated myo1e that consists of the motor and the single IQ motif with a bound calmodulin. We determined the rates and equilibrium constants for the key steps in the ATPase cycle. The maximum actin activated ATPase rate (V(max)) and the actin concentration at half-maximum of V(max) (K(ATPase)) of myo1e are similar to those of the native protein. The K(ATPase) is low (approximately 1 microm), however the affinity of myo1e for actin in the presence of ATP is very weak. A weak actin affinity and a rapid rate of phosphate release result in a pathway under in vitro assay conditions in which phosphate is released while myo1e is dissociated from actin. Actin activation of the ATPase activity and the low K(ATPase) are the result of actin activation of ADP release. We propose that myo1e is tuned to function in regions of high concentrations of cross-linked actin filaments. Additionally, we found that ADP release from actomyo1e is > 10-fold faster than other vertebrate myosin-I isoforms. We propose that subclass-1 myosin-Is are tuned for rapid sliding, whereas subclass-2 isoforms are tuned for tension maintenance or stress sensing.     

Vertebrate myosin VIIb is a high duty ratio motor adapted for generating and maintaining tension

Kinetic adaptation of muscle and non-muscle myosins plays a central role in defining the unique cellular functions of these molecular motor enzymes. The unconventional vertebrate class VII myosin, myosin VIIb, is highly expressed in polarized cells and localizes to highly ordered actin filament bundles such as those found in the microvilli of the intestinal brush border and kidney. We have cloned mouse myosin VIIb from a cDNA library, expressed and purified the catalytic motor domain, and characterized its actin-activated ATPase cycle using quantitative equilibrium and kinetic methods. The myosin VIIb steady-state ATPase activity is slow (approximately 1 s(-1)), activated by very low actin filament concentrations (K(ATPase) approximately 0.7 microm), and limited by ADP release from actomyosin. The slow ADP dissociation rate constant generates a long lifetime of the strong binding actomyosin.ADP states. ADP and actin binding is uncoupled, which enables myosin VIIb to remain strongly bound to actin and ADP at very low actin concentrations. In the presence of 2 mm ATP and 2 microm actin, the duty ratio of myosin VIIb is approximately 0.8. The enzymatic properties of actomyosin VIIb are suited for generating and maintaining tension and favor a role for myosin VIIb in anchoring membrane surface receptors to the actin cytoskeleton. Given the high conservation of vertebrate class VII myosins, deafness phenotypes arising from disruption of normal myosin VIIa function are likely to reflect a loss of tension in the stereocilia of inner ear hair cells.     

Mechanism of regulation of Acanthamoeba myosin-IC by heavy-chain phosphorylation

The ATPase activity of myosin-Is from lower eukaryotes is activated by phosphorylation by the p21-activated kinase family at the TEDS site on an actin-binding surface-loop. This actin-binding loop is the site of a cardiac myosin-II mutation responsible for some forms of familial hypertrophic cardiomyopathy. To determine the mechanism of myosin-I regulation by heavy-chain phosphorylation (HCP) and to better understand the importance of this loop in the function of all myosin isoforms, we performed a kinetic investigation of the regulatory mechanism of the Acanthamoeba myosin-IC motor domain (MIC(IQ)). Phosphorylated and dephosphorylated MIC(IQ) show actin-activated ATPase activity; however, HCP increases the ATPase activity >20-fold. HCP does not greatly affect the rate of phosphate release from MIC in the absence of actin, as determined by single turnover experiments. Additionally, HCP does not significantly affect the affinity of myosin for actin in the absence or presence of ATP, the rate of ATP-induced dissociation of actoMIC(IQ), the affinity of ADP, or the rate of ADP release. Sequential-mix single-turnover experiments show that HCP regulates the rate of phosphate release from actin-bound MIC(IQ). We propose that the TEDS-containing actin-binding loop plays a direct role in regulating phosphate release and the force-generating (A-to-R) transition of myosin-IC.     

Myosin X is a high duty ratio motor

Myosin X is expressed in a variety of cell types and plays a role in cargo movement and filopodia extension, but its mechanoenzymatic characteristics are not fully understood. Here we analyzed the kinetic mechanism of the ATP hydrolysis cycle of acto-myosin X using a single-headed construct (M10IQ1). Myosin X was unique for the weak "strong actin binding state" (AMD) with a K(d) of 1.6 microm attributed to the large dissociation rate constant (2.1 s(-1)). V(max) and K(ATPase) of the actin-activated ATPase activity of M10IQ1 were 13.5 s(-1) and 17.4 mum, respectively. The ATP hydrolysis rate (>100 s(-1)) and the phosphate release rate from acto-myosin X (>100 s(-1)) were much faster than the entire ATPase cycle rate and, thus, not rate-limiting. The ADP off-rate from acto-myosin X was 23 s(-1), which was two times larger than the V(max). The P(i)-burst size was low (0.46 mol/mol), indicating that the equilibrium is significantly shifted toward the prehydrolysis intermediate. The steady-state ATPase rate can be explained by a combination of the unfavorable equilibrium constant of the hydrolysis step and the relatively slow ADP off-rate. The duty ratio calculated from our kinetic model, 0.6, was consistent with the duty ratio, 0.7, obtained from comparison of K(m ATPase) and K(m motility). Our results suggest that myosin X is a high duty ratio motor.     

Mechanism of nucleotide binding to actomyosin VI: evidence for allosteric head-head communication

We have examined the kinetics of nucleotide binding to actomyosin VI by monitoring the fluorescence of pyrene-labeled actin filaments. ATP binds single-headed myosin VI following a two-step reaction mechanism with formation of a low affinity collision complex (1/K(1)' = 5.6 mm) followed by isomerization (k(+2)' = 176 s-1) to a state with weak actin affinity. The rates and affinity for ADP binding were measured by kinetic competition with ATP. This approach allows a broader range of ADP concentrations to be examined than with fluorescent nucleotide analogs, permitting the identification and characterization of transiently populated intermediates in the pathway. ADP binding to actomyosin VI, as with ATP binding, occurs via a two-step mechanism. The association rate constant for ADP binding is approximately five times greater than for ATP binding because of a higher affinity in the collision complex (1/K(5b)' = 2.2 mm) and faster isomerization rate constant (k(+5a)' = 366 s(-1)). By equilibrium titration, both heads of a myosin VI dimer bind actin strongly in rigor and with bound ADP. In the presence of ATP, conditions that favor processive stepping, myosin VI does not dwell with both heads strongly bound to actin, indicating that the second head inhibits strong binding of the lead head to actin. With both heads bound strongly, ATP binding is accelerated 2.5-fold, and ADP binding is accelerated >10-fold without affecting the rate of ADP release. We conclude that the heads of myosin VI communicate allosterically and accelerate nucleotide binding, but not dissociation, when both are bound strongly to actin.     

Methanol-induced release of tightly bound adenine nucleotides from thylakoid-associated CF1

Incubation of thylakoids in 33% methanol causes a release of the tightly bound nucleotides from CF1. This methanol effect is not a stimulation of nucleotide exchange, since no medium ATP or ADP is incorporated into CF1 during the methanol treatment. While the optimal conditions for stimulating the release of tightly bound ADP were similar to those for activating the ATPase, a direct relationship between the effects was not found. The tightly bound ADP does not represent a catalytic intermediate in this system, since (a) its rate of release is much slower than enzyme turnover, and (b) the substrate specificity for hydrolysis is different from that which promotes ADP release. A regulatory role for the tightly bound ADP in methanol-activated ATPase is also not indicated, since (a) activation of the ATPase occurs much more rapidly than ADP release, and (b) after the tightly bound ADP has been lost, high rates of ATP hydrolysis still require the presence of methanol, and (c) the small ATPase activity which persists after the removal of the methanol is not correlated with the loss of bound ADP. These results show that significant rates of ATP hydrolysis can occur with ADP still tightly bound to CF1. This argues against any model in which ADP regulates ATPase activity by binding directly to the catalytic site.     

Kinetics processivity and the direction of motion of Ncd.

The kinetic mechanism of the nonclaret disjunctional protein (Ncd) motor was investigated using the dimer termed MC1 (residues 209-700), which has been shown to exhibit negative-end directed motility (Chandra et al., 1993). The kinetic properties are similar to those of the monomeric Ncd motor domain (Pechatnikova and Taylor, 1997). The maximum steady-state ATPase activity of 1.5 s(-1) is half as large as for the monomeric motor. Dissociation constants in the presence of nucleotides showed the same trend but with approximately a two-fold decrease in the values: K(d) values are 1.0 microM for ADP-AlF(4), 1.1 microM for ATPgammaS, 1.5 microM for ATP, 3 microM for ADP, and 10 microM for ADP-vanadate (in 25 mM NaCl, 22 degrees C). The apparent second-order rate constants for the binding of ATP and ADP to the microtubule-motor complex (MtMC1) are 2 microM(-1) s(-1). Based on measurements at high microtubule concentrations the kinetic steps were fitted to the scheme,[see text] where N refers to one head of the dimer and T, D, and P stand for ATP, ADP, and inorganic phosphate. k(1) and k(-4) are the first-order rate constants of the transition induced by the binding of mant ATP and mant ADP respectively. ADP release is the main rate-limiting step in the MtMC1 mechanism. The binding of the MC1-mant ADP complex to microtubules released less than half of the mant ADP (alternating site reactivity). The second mant ADP is only released by the binding of nucleotides that dissociate the MtMC1 complex (ATP and ADP but not AMPPNP). The apparent rate constant for dissociation of the second mant ADP is four times smaller than the first and much smaller than the rate of dissociation of MtMC1 by ATP or ADP. These results are explained by a model in which MC1.ADP is first dissociated from the microtubule by ATP, followed by rebinding to the microtubule by the ADP-containing head. Ncd may follow a different reaction pathway than does kinesin, but the differences in rate constants do not explain the opposite direction of motion. The kinetic evidence and the high ratio of motile velocity to ATPase support a nonprocessive, low duty cycle mechanism for the Ncd motor.     

Kinetic characterization of the ATPase cycle of the molecular chaperone Hsc66 from Escherichia coli

Hsc66 from Escherichia coli is a constitutively expressed hsp70 class molecular chaperone whose activity is coupled to ATP binding and hydrolysis. To better understand the mechanism and regulation of Hsc66, we investigated the kinetics of ATP hydrolysis and the interactions of Hsc66 with nucleotides. Steady-state experiments revealed that Hsc66 has a low affinity for ATP (K(m)(ATP) = 12.7 microM) compared with other hsp70 chaperones. The kinetics of nucleotide binding were determined by analyzing changes in the Hsc66 absorbance spectrum using stopped-flow methods at 23 degrees C. ATP binding results in a rapid, biphasic increase of Hsc66 absorbance at 280 nm; this is interpreted as arising from a two-step process in which ATP binding (k(a)(ATP) = 4.2 x 10(4) M(-1) s(-1), k(d)(ATP) = 1.1 s(-1)) is followed by a slow conformational change (k(conf) = 0. 1 s(-1)). Under single turnover conditions, the ATP-induced transition decays exponentially with a rate (k(decay) = 0.0013 s(-1)) similar to that observed in both steady-state and single turnover ATP hydrolysis experiments (k(hyd) = 0.0014 s(-1)). ADP binding to Hsc66 results in a monophasic transition in the absence (k(a)(ADP) = 7 x 10(5) M(-1) s(-1), k(d)(ADP) = 60 s(-1)) and presence of physiological levels of inorganic phosphate (k(a)(ADP(P(i)) = 0.28 x 10(5) M(-1) s(-1), k(d)(ADP(P(i)) = 9.1 s(-1)). These results indicate that ATP hydrolysis is the rate-limiting step under steady-state conditions and is >10(3)-fold slower than the rate of ADP/ATP exchange. Thus, in contrast to DnaK and eukaryotic forms of hsp70 that have been characterized to date, the R if T equilibrium balance for Hsc66 is shifted in favor of the low peptide affinity T state, and regulation of the reaction cycle is expected to occur at the ATP hydrolysis step rather than at nucleotide exchange.     

The kinetic mechanism of kinesin

The chemical kinetic mechanism of kinesin (K) is considered by using a consensus scheme incorporating biochemically defined open, closed and trapped states. In the absence of microtubules, the dominant species is a trapped K*ADP state, which is defined by its ultra-slow release of ADP (off rate, k(off) approximately 0.002 s(-1)) and weak microtubule binding (dissociation constant, K(d) approximately 10-20 microM). Once bound, this trapped state equilibrates with a strongly binding open state that rapidly releases ADP (k(off) approximately 300 s(-1)). After ADP release, Mg*ATP binds (on rate, k(on) approximately 2 microM(-1)s(-1)) driving formation of a closed state that is defined by hydrolysis competence and by strong binding to microtubules. Hydrolysis (k(hyd) approximately 100-300 s(-1)) and phosphate release (k(off)>100 s(-1)) both occur in this microtubule-bound closed state. Phosphate release acts as a gate that controls reversion to the trapped K*ADP state, which detaches from the microtubule, completing the cycle.     

Rate of ATP synthesis by dynein

The rates of ATP synthesis and release by the dynein ATPase were determined in order to estimate thermodynamic parameters according to the pathway: (Formula: see text). Dynein was incubated with high concentrations of ADP and Pi to drive the net synthesis of ATP, and the rate of ATP production was monitored fluorometrically by production of NADPH through a coupled assay using hexokinase and glucose-6-phosphate dehydrogenase. The turnover number for the rate of release of ATP from 22S dynein was 0.01 s-1 per site at pH 7.0, 28 degrees C, assuming a molecular weight of 750 000 per site. The same method gave a rate of ATP synthesis by myosin subfragment 1 of 3.4 X 10(-4) s-1 at pH 7.0, 28 degrees C. The rate of ATP synthesis at the active site was estimated from the time dependence of medium phosphate-water oxygen exchange. Dynein was incubated with ADP and [18O] Pi, and the rate of loss of the labeled oxygen to water was monitored by 31P NMR. A partition coefficient of 0.31 was determined, which is equal to k-2/(k-2 + k3). Assuming k3 = 8 s-1 [Johnson, K.A. (1983) J. Biol. Chem. 258, 13825-13832], k-2 = 3.5 s-1. From the rates of ATP binding and hydrolysis measured previously (Johnson, 1983), the equilibrium constants for ATP binding and hydrolysis could be calculated: K1 = 5 X 10(7) M-1 and K2 = 14.(ABSTRACT TRUNCATED AT 250 WORDS)     

Kinetic mechanism of human myosin IIIA

Myosin IIIA is specifically expressed in photoreceptors and cochlea and is important for the phototransduction and hearing processes. In addition, myosin IIIA contains a unique N-terminal kinase domain and C-terminal tail actin-binding motif. We examined the kinetic properties of baculovirus expressed human myosin IIIA containing the kinase, motor, and two IQ domains. The maximum actin-activated ATPase rate is relatively slow (k(cat) = 0.77 +/- 0.08 s(-1)), and high actin concentrations are required to fully activate the ATPase rate (K(ATPase) = 34 +/- 11 microm). However, actin co-sedimentation assays suggest that myosin III has a relatively high steady-state affinity for actin in the presence of ATP (K(actin) approximately 7 microm). The rate of ATP binding to the motor domain is quite slow both in the presence and absence of actin (K(1)k(+2) = 0.020 and 0.001 microm(-1).s(-1), respectively). The rate of actin-activated phosphate release is more than 100-fold faster (85 s(-1)) than the k(cat), whereas ADP release in the presence of actin follows a two-step mechanism (7.0 and 0.6 s(-1)). Thus, our data suggest a transition between two actomyosin-ADP states is the rate-limiting step in the actomyosin III ATPase cycle. Our data also suggest the myosin III motor spends a large fraction of its cycle in an actomyosin ADP state that has an intermediate affinity for actin (K(d) approximately 5 microm). The long lived actomyosin-ADP state may be important for the ability of myosin III to function as a cellular transporter and actin cross-linker in the actin bundles of sensory cells.     

Drosophila myosin VIIA is a high duty ratio motor with a unique kinetic mechanism

Mutations of myosin VIIA cause deafness in various species from human and mice to Zebrafish and Drosophila. We analyzed the kinetic mechanism of the ATPase cycle of Drosophila myosin VIIA by using a single-headed construct with the entire neck domain. The steady-state ATPase activity (0.06 s(-1)) was markedly activated by actin to yield V(max) and K(ATPase) of 1.72 s(-1) and 3.2 microm, respectively. The most intriguing finding is that the ATP hydrolysis predominantly takes place in the actin-bound form (actin-attached hydrolysis) for the actomyosin VIIA ATPase reaction. The ATP hydrolysis rate was much faster for the actin-attached form than the dissociated form, in contrast to other myosins reported so far. Both the ATP hydrolysis step and the phosphate release step were significantly faster than the entire ATPase cycle rate, thus not rate-determining. The rate of ADP dissociation from actomyosin VIIA was 1.86 s(-1), which was comparable with the overall ATPase cycle rate, thus assigned to be a rate-determining step. The results suggest that Drosophila myosin VIIA spends the majority of the ATPase cycle in an actomyosin.ADP form, a strong actin binding state. The duty ratio calculated from our kinetic model was approximately 0.9. Therefore, myosin VIIA is classified to be a high duty ratio motor. The present results suggested that myosin VIIA can be a processive motor to serve cargo trafficking in cells once it forms a dimer structure.     

ATP occlusion by P-glycoprotein as a surrogate measure for drug coupling

The multidrug efflux pump P-glycoprotein (Pgp) couples drug transport to ATP hydrolysis. Previously, using a synthetic library of tetramethylrosamine ( TMR) analogues, we observed significant variation in ATPase stimulation ( V m (D)). Concentrations required for half-maximal ATPase stimulation ( K m (D)) correlated with ATP hydrolysis transition-state stabilization and ATP occlusion (EC 50 (D)) at a single site. Herein, we characterize several TMR analogues that elicit modest turnover ( k cat 相似文献   

Regulation of force development studied by photolysis of caged ADP in rabbit skinned psoas fibers.

The present study examined the effects of Ca(2+) and strongly bound cross-bridges on tension development induced by changes in the concentration of MgADP. Addition of MgADP to the bath increased isometric tension over a wide range of [Ca(2+)] in skinned fibers from rabbit psoas muscle. Tension-pCa (pCa is -log [Ca(2+)]) relationships and stiffness measurements indicated that MgADP increased mean force per cross-bridge at maximal Ca(2+) and increased recruitment of cross-bridges at submaximal Ca(2+). Photolysis of caged ADP to cause a 0.5 mM MgADP jump initiated an increase in isometric tension under all conditions examined, even at pCa 6.4 where there was no active tension before ADP release. Tension increased monophasically with an observed rate constant, k(ADP), which was similar in rate and Ca(2+) sensitivity to the rate constant of tension re-development, k(tr), measured in the same fibers by a release-re-stretch protocol. The amplitude of the caged ADP tension transient had a bell-shaped dependence on Ca(2+), reaching a maximum at intermediate Ca(2+) (pCa 6). The role of strong binding cross-bridges in the ADP response was tested by treatment of fibers with a strong binding derivative of myosin subfragment 1 (NEM-S1). In the presence of NEM-S1, the rate and amplitude of the caged ADP response were no longer sensitive to variations in the level of activator Ca(2+). The results are consistent with a model in which ADP-bound cross-bridges cooperatively activate the thin filament regulatory system at submaximal Ca(2+). This cooperative interaction influences both the magnitude and kinetics of force generation in skeletal muscle.     

Mechanism of action of myosin X, a membrane-associated molecular motor

We have performed a detailed biochemical kinetic and spectroscopic study on a recombinant myosin X head construct to establish a quantitative model of the enzymatic mechanism of this membrane-bound myosin. Our model shows that during steady-state ATP hydrolysis, myosin X exhibits a duty ratio (i.e. the fraction of the cycle time spent strongly bound to actin) of around 16%, but most of the remaining myosin heads are also actin-attached even at moderate actin concentrations in the so-called "weak" actin-binding states. Contrary to the high duty ratio motors myosin V and VI, the ADP release rate constant from actomyosin X is around five times greater than the maximal steady-state ATPase activity, and the kinetic partitioning between different weak actin-binding states is a major contributor to the rate limitation of the enzymatic cycle. Two different ADP states of myosin X are populated in the absence of actin, one of which shows very similar kinetic properties to actomyosin.ADP. The nucleotide-free complex of myosin X with actin shows unique spectral and biochemical characteristics, indicating a special mode of actomyosin interaction.     

Biochemical characterization of the human RAD51 protein. II. Adenosine nucleotide binding and competition

RecA mediated homologous recombination requires cooperative ATP binding and hydrolysis to assume and maintain an active, extended DNA-protein (nucleoprotein) filament. Human RAD51 protein (hRAD51) lacks the magnitude of ATP-induced cooperativity and catalytic efficiency displayed by RecA. Here, we examined hRAD51 binding and ATPase inhibition pattern by ADP and ATP/adenosine 5'-O-(thiotriphosphate) (ATPgammaS). hRAD51 fully saturates with ATP/ATPgammaS regardless of DNA cofactor (K(D) approximately 5 microm; 1 ATP/1 hRAD51). The binding of ADP to hRAD51 appeared bimodal. The first mode was identical to ATP/ATPgammaS binding (K(app1) approximately 3 microm; 1 ADP/1 hRAD51), while a second mode occurred at elevated ADP concentrations (K(app2) > or = 125 microm; >1 ADP/1 hRAD51). We could detect ADP --> ATP exchange in the high affinity ADP binding mode (K(app1)) but not the low affinity binding mode (K(app2)). At low ATP concentrations (<0.3 mm), ADP and ATPgammaS competitively inhibit the hRAD51 ATPase (K(m)((app)) > K(m)). However, at high ATP (>0.3 mm), the hRAD51 ATPase was stimulated by concentrations of ATPgammaS that were 20-fold above the K(D). Ammonium sulfate plus spermidine decreased the affinity of hRAD51 for ADP substantially ( approximately 10-fold) and ATP modestly ( approximately 3-fold). Our results suggest that ATP binding is not rate-limiting but that the inability to sustain an active nucleoprotein filament probably restricts the hRAD51 ATPase.     

Kinetic mechanism and regulation of myosin VI.

Myosin VI is the only pointed end-directed myosin identified and is likely regulated by heavy chain phosphorylation (HCP) at the actin-binding site in vivo. We undertook a detailed kinetic analysis of the actomyosin VI ATPase cycle to determine whether there are unique adaptations to support reverse directionality and to determine the molecular basis of regulation by HCP. ADP release is the rate-limiting step in the cycle. ATP binds slowly and with low affinity. At physiological nucleotide concentrations, myosin VI is strongly bound to actin and populates the nucleotide-free (rigor) and ADP-bound states. Therefore, myosin VI is a high duty ratio motor adapted for maintaining tension and has potential to be processive. A mutant mimicking HCP increases the rate of P(i) release, which lowers the K(ATPase) but does not affect ADP release. These measurements are the first to directly measure the steps regulated by HCP for any myosin. Measurements with double-headed myosin VI demonstrate that the heads are not independent, and the native dimer hydrolyzes multiple ATPs per diffusional encounter with an actin filament. We propose an alternating site model for the stepping and processivity of two-headed high duty ratio myosins.     

The effect of hydrostatic pressure on the interaction of actomyosin subfragment 1 with nucleotides.

Increased hydrostatic pressure has previously been shown to reduce the tension of isometrically contracting skinned muscle fibres. An isomerization of the actomyosin complex is known to be pressure sensitive, but the pressure sensitivity of other steps in the ATPase pathway has not been characterised. We report here the effect of pressure on the ATP hydrolysis step of the myosin subfragment 1 ATPase, ADP binding to actomyosin subfragment 1 and the rate of ATP induced dissociation of actomyosin subfragment 1. We discuss the relationship of these changes to the observed effect of pressure on skinned muscle fibres.