A strategy to develop molecular markers applicable to a wide range of crosses for marker assisted selection in plant breeding: a case study on anthracnose disease resistance in lupin (Lupinus angustifolius L.)

A key challenge in marker-assisted selection (MAS) for molecular plant breeding is to develop markers linked to genes of interest which are applicable to multiple breeding populations. In this study representative F₂ plants from a cross Mandalup (resistant to anthracnose disease) × Quilinock (susceptible) of Lupinus angustifolius were used in DNA fingerprinting by Microsatellite-anchored Fragment Length Polymorphism (MFLP). Nine candidate MFLP markers linked to anthracnose resistance were identified, then ‘validated’ on 17 commercial cultivars. The number of “false positives” (showing resistant-allele band but lack of the R gene) for each of the nine candidate MFLP markers on the 17 cultivars ranged from 1 to 9. The candidate marker with least number of false positive was selected, sequenced, and was converted into a co-dominant, sequence-specific, simple PCR based marker suitable for routine implementation. Testing on 180 F₂ plants confirmed that the converted marker was linked to the R gene at 5.1 centiMorgan. The banding pattern of the converted marker was consistent with the disease phenotype on 23 out of the 24 cultivars. This marker, designated “AnManM1”, is now being used for MAS in the Australian lupin breeding program. We conclude that generation of multiple candidate markers, followed by a validation step to select the best marker before conversion to an implementable form is an efficient strategy to ensure wide applicability for MAS.     

Development of sequence-specific PCR markers associated with a polygenic controlled trait for marker-assisted selection using a modified selective genotyping strategy: a case study on anthracnose disease resistance in white lupin (<Emphasis Type="Italic">Lupinus albus</Emphasis> L.)

Selection for anthracnose disease resistance is one of the top priorities in white lupin (Lupinus albus) breeding programs. A cross was made between a landrace P27174 (resistant to anthracnose) and a cultivar Kiev Mutant (susceptible). The progeny was advanced to F₈ recombinant inbred lines (RILs). Disease tests on the RIL population from field trials over 2 years indicated that the disease resistance in P27174 was polygenic controlled. A modified selective genotyping strategy was applied in the development of molecular markers linked to quantitative loci conferring anthracnose diseases resistance. Eight individual plants representing high level of anthracnose resistance (HR), eight plants representing susceptibility (S), together with eight lines representing medium level of anthracnose resistance (MR), were subjected to DNA fingerprinting by Microsatellite-anchored Fragment Length Polymorphisms (MFLP). Six MFLP polymorphisms, which had the banding pattern matching the HR plants and the S plants, were identified as candidate markers linked to quantitative loci conferring anthracnose resistance. The six candidate MFLP markers were delineated into three groups based on their banding variation on the eight MR plants. One candidate MFLP marker each from the three groups was selected, cloned, sequenced, and converted into co-dominant, sequence-specific PCR markers. These three markers, designated as WANR1, WANR2 and WANR3, were tested on a segregating population containing 189 F₈ RILs. The disease phenotyping data and the marker genotyping data on the F₈ RILs were merged and analysed by the JMP software using the ‘fit-model’ function, which revealed that 71% of the phenotypic variation was controlled by genetic factors, while the other 29% of the phenotypic variation was due to environmental factors and environment × genotype interactions. On individual marker basis, marker WANR1 conditioned 39% of phenotypic variations of anthracnose resistance, followed by marker WANR2 with 8%, and WANR3 with 12%. Further analysis showed that WANR2 and WANR3 were on the same linkage group with a genetic distance of 15.3 cM. The combination of the two markers WANR1 and WANR3 explained 51% out from the 71% of the genetic controlled variations for disease resistance, indicating that the two QTLs working additively for anthracnose disease resistance. A simulation of marker-assisted selection on the F₈ RIL population using the two markers WANR1 and WANR3 identified 42 out of the 189 RILs being homozygous for resistance-allele bands for both markers, and 41 of them showed disease severity below 3.0 on the 1 (highly resistant) to 5 (susceptible) scale. The two markers WANR1 and WANR3 have now been implemented for marker-assisted selection for anthracnose resistance in the L. albus breeding program in Australia.     

A molecular marker linked to the mollis gene conferring soft-seediness for marker-assisted selection applicable to a wide range of crosses in lupin (Lupinus angustifolius L.) breeding

To broaden the gene pool of domesticated commercial cultivars of narrow-leafed lupin (Lupinus angustifolius L.), wild accessions are used as parents in crossing in lupin breeding. Among the progenies from wild × domesticated (W × D) crosses, the soft-seediness gene mollis is the most difficult domestication gene to be selected by conventional breeding methods, where molecular marker-assisted selection (MAS) is highly desirable. MAS in plant breeding requires markers to be cost-effective and high-throughput, and be applicable to a wide range of crosses in a breeding program. In this study, representative plants from an F8 recombinant inbred line (RIL) population derived from a W × D cross, together with four cultivars and four wild types, were used in DNA fingerprinting by microsatellite-anchored fragment length polymorphisms (MFLP). Two co-dominant MFLP polymorphisms were identified as candidate markers linked to the mollis gene, and one of the candidate markers was selected and converted into a co-dominant, sequence-specific PCR marker. This marker, designated MoLi, showed a perfect match with phenotypes of seed coat permeability on a segregating population consisting of 115 F8 RILs, confirming the close genetic linkage to the mollis gene. Validation tests showed that the banding pattern of marker MoLi is consistent with all the 25 historical and current commercial cultivars released in Australia, and is consistent with mollis genotypes in 119 of the 125 accessions in the Australian L. angustifolius core collection. Marker MoLi provides a cost-effective way to select the mollis gene in a wide range of W × D crosses in lupin breeding.     

Development of molecular markers using MFLP linked to a gene conferring resistance to Diaporthe toxica in narrow-leafed lupin ( Lupinus angustifolius L.)

Phomopsis stem blight (PSB) caused by Diaporthe toxica is a major disease in narrow-leafed lupin ( Lupinus angustifolius L.). The F(2) progeny and the parental plants from a cross between a breeding line 75A:258 (containing a single dominant resistance gene Phr1 against the disease) and a commercial cultivar Unicrop (susceptible to the disease) were used for development of molecular markers linked to the disease resistance gene. Two pairs of co-dominant DNA polymorphisms were detected using the microsatellite-anchored fragment length polymorphism (MFLP) technique. Both pairs of polymorphisms were isolated from the MFLP gels, re-amplified by PCR, sequenced, and converted into co-dominant, sequence-specific and PCR-based markers. Linkage analysis by MAPMAKER suggested that one marker (Ph258M2) was 5.7 centiMorgans (cM) from Phr1, and the other marker (Ph258M1) was 2.1 cM from Ph258M2 but further away from Phr1. These markers are suitable for marker-assisted selection (MAS) in lupin breeding.     

Rapid development of molecular markers by next-generation sequencing linked to a gene conferring phomopsis stem blight disease resistance for marker-assisted selection in lupin (Lupinus angustifolius L.) breeding

Selection for phomopsis stem blight disease (PSB) resistance is one of the key objectives in lupin (Lupinus angustifolius L.) breeding programs. A cross was made between cultivar Tanjil (resistant to PSB) and Unicrop (susceptible). The progeny was advanced into F₈ recombinant inbred lines (RILs). The RIL population was phenotyped for PSB disease resistance. Twenty plants from the RIL population representing disease resistance and susceptibility was subjected to next-generation sequencing (NGS)-based restriction site-associated DNA sequencing on the NGS platform Solexa HiSeq2000, which generated 7,241 single nucleotide polymorphisms (SNPs). Thirty-three SNP markers showed the correlation between the marker genotypes and the PSB disease phenotype on the 20 representative plants, which were considered as candidate markers linked to a putative R gene for PSB resistance. Seven candidate markers were converted into sequence-specific PCR markers, which were designated as PhtjM1, PhtjM2, PhtjM3, PhtjM4, PhtjM5, PhtjM6 and PhtjM7. Linkage analysis of the disease phenotyping data and marker genotyping data on a F₈ population containing 187 RILs confirmed that all the seven converted markers were associated with the putative R gene within the genetic distance of 2.1 CentiMorgan (cM). One of the PCR markers, PhtjM3, co-segregated with the R gene. The seven established PCR markers were tested in the 26 historical and current commercial cultivars released in Australia. The numbers of “false positives” (showing the resistance marker allele band but lack of the putative R gene) for each of the seven PCR markers ranged from nil to eight. Markers PhtjM4 and PhtjM7 are recommended in marker-assisted selection for PSB resistance in the Australian national lupin breeding program due to its wide applicability on breeding germplasm and close linkage to the putative R gene. The results demonstrated that application of NGS technology is a rapid and cost-effective approach in development of markers for molecular plant breeding.     

Development and implementation of a sequence-specific PCR marker linked to a gene conferring resistance to anthracnose disease in narrow-leafed lupin (Lupinus angustifolius L.)

Anthracnose caused by Colletotrichum gloeosporioides is the most serious disease of lupins (Lupinus spp). A cross was made between cultivars Tanjil (resistant) and Unicrop (susceptible) in narrow-leafed lupin (L. angustifolius). Analysis of disease reaction data on the F₂ population and on the resultant F₇ recombinant inbred lines suggested that Tanjil contained a single dominant gene (Lanr1) conferring resistance to anthracnose. The parents and the representative F₂ plants were used to generate molecular markers liked to the Lanr1 gene using the MFLP technique. A co-dominant MFLP polymorphism linked to the Lanr1 gene was identified as a candidate marker. The bands were isolated, re-amplified by PCR, cloned and sequenced. The MFLP polymorphism was converted into a co-dominant, sequence-specific, simple PCR-based marker. Linkage analysis by the computer program MAPMAKER indicated that the marker was 3.5 centiMorgans (cM) from the gene Lanr1. This marker is currently being implemented for marker assisted selection in the Australian National Lupin Breeding Program.     

Construction of a genetic linkage map using MFLP and identification of molecular markers linked to domestication genes in narrow-leafed lupin (Lupinus angustifolius L.)

A mapping population of F(8)derived recombinant inbred lines (RILs) was established from a cross between a domesticated breeding line 83A:476 and a wild type P27255 in narrow-leaf lupin (Lupinus angustifolius L.). The parents together with the 89 RILs were subjected to DNA fingerprinting using microsatellite-anchored fragment length polymorphism (MFLP) to rapidly generate DNA markers to construct a linkage map. Five hundred and twenty two unique markers of which 21% were co-dominant, were generated and mapped. Phenotypic data for the domestication traits: mollis (soft seeds), leucospermus (white flower and seed colour); Lentus (reduced pod-shattering), iucundis (low alkaloid), Ku (early flowering) and moustache pattern on seed coats; were included. Three to 7 molecular markers were identified within 5 cM of each of these domestication genes. The anthracnose resistance gene Lanr1 was also mapped. Linkage groups were constructed using MapManager version QTXb20, resulting in 21 linkage groups consisting of 7 or more markers. The total map length was 1543 cM, with an average distance of 3.4 cM between adjacent markers. This is the first published map for a lupin species. The map can be exploited for marker assisted selection for genetic improvement in lupin breeding programs.     

Development of a sequence-specific PCR marker linked to the gene “pauper” conferring low-alkaloids in white lupin (Lupinus albus L.) for marker assisted selection

Seeds and plants of wild type Lupinus albus are bitter and contain high level of alkaloids. During domestication, at least three genes conferring low-alkaloid content were identified and incorporated into commercial varieties. Australian lupin breeders exclusively utilize one of these sweetness genes, “pauper”, in all varieties to prevent possible bitterness contamination via out-crossing. A cross was made between a sweet variety Kiev Mutant (containing pauper gene) and a bitter type landrace P27174, and the population was advanced into F₈ recombinant inbred lines (RILs). Twenty-four plants representing sweetness and bitterness were subjected to DNA fingerprinting by the microsatellite-anchored fragment length polymorphism (MFLP) technique. A dominant polymorphism was discovered in an MFLP fingerprint. The MFLP marker was converted into a co-dominant, sequence-specific, simple PCR-based marker. Linkage analysis by the software program MapManager with marker score data and alkaloid phenotyping data from a segregating population containing 190 F₈ RILs indicated that the marker is linked to the pauper gene at the genetic distance of 1.4 centiMorgans (cM). This marker, which is designated as “PauperM1”, is capable of distinguishing the pauper gene from the other two low-alkaloid genes exiguus and nutricius. Validation on germplasm from the Australian lupin breeding program showed that the banding pattern of the marker PauperM1 is consistent with the alkaloid genotyping on a wide range of domesticated varieties and breeding lines. The PauperM1 marker is now being implemented for marker assisted selection in the Australian albus lupin breeding program.     

A family of LRR sequences in the vicinity of the Co-2 locus for anthracnose resistance in Phaseolus vulgaris and its potential use in marker-assisted selection

 Molecular markers offer new opportunities for breeding for disease resistance. Resistance gene pyramiding in a single cultivar, as a strategy for durable resistance, can be facilitated by marker-assisted selection (MAS). A RAPD marker, ROH20⁴⁵⁰, linked to the Mesoamerican Co-2 anthracnose resistance gene, was previously transformed into a SCAR marker, SCH20. In the present paper we have further characterized the relevance of the SCH20 SCAR marker in different genetic backgrounds. Since this SCAR marker was found to be useful mainly in the Andean gene pool, we identified a new PCR-based marker (SCAreoli) for indirect scoring of the presence of the Co-2 gene. The SCAreoli SCAR marker is polymorphic in the Mesoamerican as well as in the Andean gene pool and should be useful in MAS. We also report that PvH20, the cloned sequence corresponding to the 450-bp RAPD marker ROH20⁴⁵⁰, contains six imperfect leucine-rich repeats, and reveals a family of related sequences in the vicinity of the Co-2 locus. These results are discussed in the context of the recent cloning of some plant resistance genes. Received: 26 June 1997 / Accepted: 13 October 1997     

Application of whole genome re-sequencing data in the development of diagnostic DNA markers tightly linked to a disease-resistance locus for marker-assisted selection in lupin (Lupinus angustifolius)

Background

Molecular marker-assisted breeding provides an efficient tool to develop improved crop varieties. A major challenge for the broad application of markers in marker-assisted selection is that the marker phenotypes must match plant phenotypes in a wide range of breeding germplasm. In this study, we used the legume crop species Lupinus angustifolius (lupin) to demonstrate the utility of whole genome sequencing and re-sequencing on the development of diagnostic markers for molecular plant breeding.

Results

Nine lupin cultivars released in Australia from 1973 to 2007 were subjected to whole genome re-sequencing. The re-sequencing data together with the reference genome sequence data were used in marker development, which revealed 180,596 to 795,735 SNP markers from pairwise comparisons among the cultivars. A total of 207,887 markers were anchored on the lupin genetic linkage map. Marker mining obtained an average of 387 SNP markers and 87 InDel markers for each of the 24 genome sequence assembly scaffolds bearing markers linked to 11 genes of agronomic interest. Using the R gene PhtjR conferring resistance to phomopsis stem blight disease as a test case, we discovered 17 candidate diagnostic markers by genotyping and selecting markers on a genetic linkage map. A further 243 candidate diagnostic markers were discovered by marker mining on a scaffold bearing non-diagnostic markers linked to the PhtjR gene. Nine out from the ten tested candidate diagnostic markers were confirmed as truly diagnostic on a broad range of commercial cultivars. Markers developed using these strategies meet the requirements for broad application in molecular plant breeding.

Conclusions

We demonstrated that low-cost genome sequencing and re-sequencing data were sufficient and very effective in the development of diagnostic markers for marker-assisted selection. The strategies used in this study may be applied to any trait or plant species. Whole genome sequencing and re-sequencing provides a powerful tool to overcome current limitations in molecular plant breeding, which will enable plant breeders to precisely pyramid favourable genes to develop super crop varieties to meet future food demands.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1878-5) contains supplementary material, which is available to authorized users.     

Fine mapping and analysis of a candidate gene in tomato accession PI128216 conferring hypersensitive resistance to bacterial spot race T3

Bacterial spot caused by Xanthomonas euvesicatoria, X. vesicatoria, X. perforans and X. gardneri is one of the most destructive diseases in tomatoes (Solanum lycopersicum L.) growing in tropical and subtropical regions. Exploring resistance genes from diverse germplasm and incorporating them into cultivated varieties are critical for controlling this disease. The S. pimpinellifolium accession PI128216 was reported to carry the Rx4 gene on chromosome 11 conferring hypersensitivity and field resistance to race T3. To facilitate the use of marker-assisted selection in breeding and map-based cloning of the gene, an F₂ population derived from a cross between the susceptible variety OH88119 and the resistant accession PI128216 was created for fine mapping of the Rx4 gene. Using 18 markers developed through various approaches, we mapped the gene to a 45.1-kb region between two markers pcc17 and pcc14 on chromosome 11. A NBS-LRR class of resistance gene was identified as the candidate for the Rx4 gene based on annotation results from the International Tomato Annotation Group. Comparison of the genomic DNA sequences of the Rx4 alleles in PI128216 and OH88119 revealed a 6-bp insertion/deletion (InDel) and eight SNPs. The InDel marker was successfully used to distinguish resistance and susceptibility in 12 tomato lines. These results will facilitate cloning the Rx4 gene and provide a useful tool for marker-assisted selection of this gene in tomato breeding programs.     

作物分子标记辅助选择的研究进展、影响因素及其发展策略

随着分子标记技术及其检测手段的发展,开发和应用成本的降低,分子标记辅助选择(MAS)在作物育种上的应用优势日益明显。本文综述了近年来MAS在基因聚合、基因转移和数量性状改良上的研究进展。总结了MAS的影响因素,包括标记与基因间的距离、目标性状的遗传率、群体大小、所用分子标记的数目、类型和相位等。并提出育种和定位同步进行、选择合适分子标记类型和数量、简化DNA提取方法、背景选择的逐步选择法、确定合适选择方案等MAS发展策略。     

A genetic linkage map of <Emphasis Type="Italic">Phaseolus vulgaris</Emphasis> L. and localization of genes for specific resistance to six races of anthracnose (<Emphasis Type="Italic">Colletotrichum lindemuthianum</Emphasis>)

A genetic map of common bean was constructed using 197 markers including 152 RAPDs, 32 RFLPs, 12 SCARs, and 1 morphological marker. The map was established by using a F₂ population of 85 individuals from the cross between a line derived from the Spanish landrace Andecha (Andean origin) and the Mesoamerican genotype A252. The resulting map covers about 1,401.9 cM, with an average marker distance of 7.1 cM and includes molecular markers linked to disease resistance genes for anthracnose, bean common mosaic virus, bean golden yellow mosaic virus, common bacterial blight, and rust. Resistance to races 6, 31, 38, 39, 65, and 357 of the pathogenic fungus Colletotrichum lindemuthianum (anthracnose) was evaluated in F₃ families derived from the corresponding F₂ individuals. The intermediate resistance to race 65 proceeding from Andecha can be explained by a single dominant gene located on linkage group B1, corresponding to the Co-1 gene. The recombination between the resistance specificities proceeding from A252 agrees with the assumption that total resistance to races 6, 31, 38, 39, 65, and 357, is organized in two clusters. One cluster, located on B4 linkage group, includes individual genes for specific resistance to races 6, 38, 39, and 357. The second cluster is located on linkage group B11 and includes individual genes for specific resistance to races 6, 31, 38, 39, and 65. These two clusters correspond to genes Co-3/Co-9 and Co-2, respectively. It is concluded that most anthracnose resistance Co- genes, previously described as single major genes conferring resistance to several races, could be organized as clusters of different genes conferring race-specific resistance. C. Rodríguez-Suárez and B. Méndez-Vigo equally share for authorship.     

The role of RAPD markers in breeding for disease resistance in common bean

Diseases are regarded as the leading constraint to increased common bean (Phaseolus vulgaris L.) production worldwide. The range in variability and complexity among bean pathogens can be controlled with different single gene and quantitative resistance sources. Combining these resistance sources into commercial cultivars is a major challenge for bean breeders. To assist breeders, a major effort to identify RAPD markers tightly linked to different genes was undertaken. To date, 23 RAPD and five SCAR markers linked to 15 different resistance genes have been identified, in addition to QTL conditioning resistance to seven major pathogens of common bean. We review the feasibility of using marker-assisted selection (MAS) to incorporate disease resistance into common bean. Indirect selection of single resistance genes in the absence of the pathogen and the opportunity afforded breeders to pyramid these genes to improve their longevity and retain valuable hypostatic genes is discussed. The role of markers linked to the QTL controlling complex resistance and the potential to combine resistance sources using marker based selection is reviewed. Improving levels of selection efficiency using flanking markers, repulsion-phase linkages, co-dominant marker pairs, recombination-facilitated MAS and SCAR markers is demonstrated. Marker-assisted selection for disease resistance in common bean provides opportunities to breeders that were not feasible with traditional breeding methods.     

Genetics of resistance to anthracnose and identification of AFLP and RAPD markers linked to the resistance gene in PI 320937 germplasm of lentil (<Emphasis Type="Italic">Lens culinaris</Emphasis> Medikus)

Anthracnose, caused by Colletotrichum truncatum, is a major disease problem and production constraint of lentil in North America. The research was conducted to examine the resistance to anthracnose in PI 320937 lentil and to identify molecular markers linked to the resistance gene in a recombinant inbred line (RIL) population developed from a cross of Eston lentil, the susceptible parent, and PI 320937, the resistant parent. A total of 147 F(5:6) RILs were evaluated for resistance to anthracnose in the greenhouse using isolate 95B36 of C. truncatum. Bulked segregant analysis (BSA) strategy was employed and two contrasting DNA bulks were constructed based on greenhouse inoculation of F(5)-derived F(6) RILs. DNA from the parents and bulks were screened with 700 RAPD primers and seven AFLP primer combinations. Analysis of segregation data indicated that a major dominant gene was responsible for resistance to anthracnose while variations in the resistance level among RILs could be the influences of minor genes. We designate the major gene as LCt-2. MapMaker analysis produced two flanking RAPD markers OPEO6(1250) and UBC-704(700) linked to LCt-2 locus in repulsion (6.4 cM) and in coupling (10.5 cM), respectively. Also, three AFLP markers, EMCTTACA(350) and EMCTTAGG(375) in coupling, and EMCTAAAG(175) in repulsion, were linked to the LCt-2 locus. These markers could be used to tag the LCt-2 locus and facilitate marker-assisted selection for resistance to anthracnose in segregating populations of lentil in which PI 320937 was used as the source of resistance. Also, a broader application of the linked RAPD markers was also demonstrated in Indianhead lentil, widely used as a source of resistance to anthracnose in the breeding program at the Crop Development Centre, University of Saskatchewan. Further selection within the few F(5:6) lines should be effective in pyramiding one or several of the minor genes into the working germplasm of lentil, resulting in a more durable and higher level of resistance.     

Association of RGA-SSCP markers with resistance to downy mildew and anthracnose in grapevines

Downy mildew (Plasmopara viticola) and anthracnose (Sphaceloma ampelinum) are two major diseases that severely affect most grapevine (Vitis vinifera) cultivars grown commercially in Thailand. Progress of conventional breeding programs of grapevine for improved resistance to these diseases can be speeded up by selection of molecular markers associated with resistance traits. We evaluated the association between 13 resistance gene analog (RGA)-single-strand conformation polymorphism (SSCP) markers with resistance to downy mildew and anthracnose in 71 segregating progenies of seven cross combinations between susceptible cultivars and resistant lines. F(1) hybrids from each cross were assessed for resistance to downy mildew and anthracnose (isolates Nk4-1 and Rc2-1) under laboratory conditions. Association of resistance traits with RGA-SSCP markers was evaluated using simple linear regression analysis. Three RGA-SSCP markers were found to be significantly correlated with anthracnose resistance, whereas significant correlation with downy mildew resistance was observed for only one RGA-SSCP marker. These results demonstrate the usefulness of RGA-SSCP markers. Four candidate markers with significant associations to resistance to these two major diseases of grapevine were identified. However, these putative associations between markers and resistance need to be verified with larger segregating populations before they can be used for marker-assisted selection.     

Development and validation of functional marker targeting an InDel in the major rice blast disease resistance gene Pi54 (Pik h )

Rice blast is one of the most devastating diseases affecting the rice crop throughout the world. In molecular breeding for host plant resistance, functional markers are very useful for enhancing the precision and accuracy in marker-assisted selection (MAS) of target gene(s) with minimum effort, time and cost. Pi54 (which was earlier known as Pik ^h ) is one of the major blast resistance genes and has been observed to show resistance against many isolates of the blast pathogen in India. The gene has been cloned through map-based strategy and encodes a nucleotide-binding site?Cleucine-rich repeat (NBS?CLRR) domain-containing protein. In the present study, we carried out allele mining for this gene and identified a 144-bp insertion/deletion (InDel) polymorphism in the exonic region of the gene. A PCR-based co-dominant molecular marker targeting this InDel, named Pi54 MAS, was developed. Pi54 MAS was observed to perfectly co-segregate with blast resistance in a mapping population with no recombinants. Validation of this marker in 105 genotypes which are either susceptible or resistant to rice blast disease showed that the marker is polymorphic in most of the resistant?Csusceptible genotype combinations and is more accurate than the earlier reported markers for Pi54. Hence this functional, co-dominant marker is suggested for routine deployment in MAS of Pi54 in breeding programs.     

Identification and application of RAPD markers for anthracnose resistance in water yam (Dioscorea alata)

Anthracnose, caused by Colletotrichum gloeosporioides, is the most severe foliar disease of water yam (Dioscorea alata) worldwide. The tetraploid breeding line, TDa 95/00328, is a source of dominant genetic resistance to the moderately virulent fast growing salmon (FGS) strain of C. gloeosporioides. Bulked segregant analysis was used to search for random amplified polymorphic DNA (RAPD) markers linked to anthracnose resistance in F₁ progeny derived from a cross between TDa 95/00328 and the susceptible male parent, TDa 95–310. Two hundred and eighty decamer primers were screened using bulks obtained from pooled DNA of individuals comprising each extreme of the disease phenotype distribution. A single locus that contributes to anthracnose resistance in TDa 95/00328 was identified and tentatively named Dcg‐1. We found two RAPD markers closely linked in coupling phase with Dcg‐1, named OPI7₁₇₀₀ and OPE6₉₅₀, both of which were mapped on the same linkage group. OPI7₁₇₀₀ appeared tightly linked to the Dcg‐1 locus; it was present in all the 58 resistant F₁ individuals and absent in all but one of the 13 susceptible genotypes (genetic distance of 2.3 cM). OPE6₉₅₀ was present in 56 of the 58 resistant progeny and only one susceptible F₁ plant showed this marker (6.8 cM). Both markers successfully identified Dcg‐1 in resistant D. alata genotypes among 34 breeding lines, indicating their potential for use in marker‐assisted selection. OPI7₁₇₀₀ and OPE6₉₅₀ are the first DNA markers for yam anthracnose resistance. The use of molecular markers presents a valuable strategy for selection and pyramiding of anthracnose resistance genes in yam improvement.     

Development of a sequence characteristic amplified region marker linked to the L4 locus conferring broad spectrum resistance to tobamoviruses in pepper plants

To develop molecular markers linked to the L4 locus conferring resistance to tobamovirus pathotypes in pepper plants, we performed AFLP with 512 primer combinations for susceptible (S pool) and resistant (R pool) DNA bulks against pathotype 1.2 of pepper mild mottle virus. Each bulk was made by pooling the DNA of five homozygous individuals from a T10 population, which was a near-isogenic BC4F2 generation for the L4 locus. A total of 19 primer pairs produced scorable bands in the R pool. Further screening with these primer pairs was done on DNA bulks from T102, a BC10F2 derived from T10 by back crossing. Three AFLP markers were finally selected and designated L4-a, L4-b and L4-c. L4-a and L4-c each underwent one recombination event, whereas no recombination for L4-b was seen in 20 individuals of each DNA bulk. Linkage analysis of these markers in 112 F2 T102 individuals showed that they were each within 2.5 cM of the L4 locus. L4-b was successfully converted into a simple 340-bp SCAR marker, designated L4SC340, which mapped 1.8 cM from the L4 locus in T102 and 0.9 cM in another BC10F2 population, T101. We believe that this newly characterized marker will improve selection of tobamovirus resistance in pepper plants by reducing breeding cost and time.     

Microsatellite markers for powdery mildew resistance in pea (Pisum sativum L.)

Powdery mildew is a common disease of field pea, Pisum sativum L., and is caused by the ascomycete fungus Erysiphe pisi. It can cause severe damage in areas where pea is cultivated. Today breeders want to develop new pea lines that are resistant to the disease. To make the breeding process more efficient, it is desirable to find genetic markers for use in a marker-assisted selection (MAS) strategy. In this study, microsatellites (SSR) were used to find markers linked to powdery mildew resistance. The resistant pea cultivar '955180' and the susceptible pea cultivar 'Majoret' were crossed and F2 plants were screened with SSR markers, using bulked segregant analysis. A total of 315 SSR markers were screened out of which five showed linkage to the powdery mildew resistance gene. No single marker was considered optimal for inclusion in a MAS program. Instead, two of the markers can be used in combination, which would result in only 1.6% incorrectly identified plants. Thus SSR markers can be successfully used in marker-assisted selection for powdery mildew resistance breeding in pea.