Solid–Liquid Equilibrium of Maltitol Aqueous Solutions—Implications on the Crystallization Behavior and Process

The solubility of maltitol in pure water and industrial syrup was measured in a temperature range from 10 to 90 °C. Maltitol is highly soluble in water, and this yields high viscosity values for the saturated aqueous solutions at different temperatures. In addition, solubility of maltitol in ethanol/water mixtures was followed at 30, 35, 45, and 55 °C. Results show that maltitol solubility is highly dependent on water content in the solvent mixture. Moreover, it increases monotonically with temperature. The logarithm of viscosity changes linearly against the mole fraction of maltitol in the aqueous solutions up to saturation. The saturated solutions showed a Newtonian behavior in a temperature range from 20 to 90 °C. Maltitol is also characterized in supersaturated solutions by a narrow metastable zone, which slightly increases as temperature is raised. The density of aqueous solutions of maltitol was measured as a function of molality up to saturation at 20 °C, and results show that density can be correlated with concentration according to a linear relation. The obtained results were used to explain maltitol crystallization, which exhibits a high nucleation rate and a slow growth leading to small size crystals.     

Solubility of Isolated Soy Protein in Ionic Environments and an Approach to Improve Its Profile

The solubility characteristics of isolated soy protein (ISP) in high ionic environments were measured in accordance with an NSI (nitrogen solubility index) method in order to study the effect of the thermal process in its commercial production. When the acid precipitated protein (APP) dispersions were heated to above 60°C and subsequently spray dried, the solubility of the resultant ISP in 0.5 m (molar) NaCl was lowered with increasing temperature, ranging from 91% at 60°C to 43% at 90°C, while the solubility in H₂0 remained at almost the 100% level regardless of heating condition. Solubility changes in 90°C-heated ISP in various 0.5m (molal) salt solutions indicated that salting-out of this protein preparation can be represented as a function of molal surface tension increment of the salt used; the solubility of ISP in ionic environments can be determined by its hydrophobicity, which seems to increase with a rise in the heat treatment temperature of APP. Therefore, there was a significant difference in salting-out behavior depending upon the order of addition of ingredients to the system; when salt was added to the slurry after the ISP was thoroughly rehydrated, no salting-out was observed in 0.5m ionic environments. Ultrasonication of 90°C-heated APP prior to spray drying was tested to examine the possibility of improving the solubility profiles of resultant ISP, with the result that a remarkable increase of solubility in 0.5 m NaCl was attained. The effect of such ultrasonication was probably due to its ability to increase the hydrophilic nature of proteins.     

Accumulation and turnover of abscisic acid in osmotically stressed cotton leaf tissue in relation to temperature

Leaf discs of cotton (Gossypium hirsutum L. cv. Deltapine 70) were osmotically stressed by floating them on solutions of polyethylene glycol 8000. The tissue produced copious amounts of abscisic acid (ABA) when stressed. Accumulation of ABA depended strongly upon temperature during the incubation, displaying a maximum at 20°C. At 35°C, the amount of ABA accumulated after 24 h was 45–80% less than at 20°C. Temperature did not affect leakage of ABA into the medium. Turnover rate of [¹⁴C]ABA was more than 3 times greater at 35°C than at 20°C. This rapd turnover at 35°C could account for the decreased ABA accumulation. Three ¹⁴C-containing metabolites of ABA were extracted from the tissue. At 20°C, two of these accumulated and retained substantial ¹⁴C over 16 h. At 35°C, though, the ¹⁴C in one of these compounds was almost completely lost during the last 8 h of the incubation. Although the metabolites are not identified, the results show some specific effects of temperature on ABA metabolism. The strong effect of temperature on ABA accumulation may contribute to patterns of ABA-dependent processes (such as stomatal closure) during water stress.     

High-performance liquid chromatographic determination of the novel antitumour drug topotecan and topotecan as the total of the lactone plus carboxylate forms,in human plasma

A sensitive high-performance liquid chromatographic (HPLC) assay has been developed and validated for the quantitation of the novel anticancer agent topotecan and topotecan as the total of its lactone and carboxylate forms in human plasma. Linear response in analyte standard peak area were observed over the concentration range 0.05–10 ng/ml using 100-μl plasma samples. The instability of the drug in the biological matrix necessitated that the plasma fraction was obtained within 5 min after blood sampling by centrifugation, immediately followed by protein precipitation with cold methanol (−30°C). Stability studies have indicated that topotecan is stable in these methanolic extracts for at least 4.5 months at −30°C and 2 months at −70°C. For the total determination of the lactone plus lactone ring-opened forms of the drug as topotecan, plasma samples were deproteinated with methanol and, subsequently, acidified with 7% (v/v) perchloric acid. Plasma samples for the measurement of total levels of the lactone and the ring-opened forms of the topotecan were stable for at least 4.5 months when stored at −30°C. After centrifugation, the supernatants were analysed by HPLC using a Zorbax SB-C₁₈ Stable Bond column and methanol-0.1 M hexane-1-sulfonic acid in methanol-0.01 M N,N,N′,N′-tetramethylethylenediamine (TEMED) in distilled water pH 6.0 (25:10:65, v/v) as the mobile phase. Detection was performed fluorimetrically. Within-run and between-run precision was always less than 12.1% in the concentration range of interest (0.05–10.0 ng/ml). The limit of quantitation is 0.05 ng/ml. Accuracy measurements ranged between 87.6 and 113.5%.     

The Influence of Organic Matter and pH on DDT Aqueous Solubility

We have studied the concentrations of DDT in ground water samples at field locations with DDT-polluted topsoil and concentrations and solubility in samples prepared from deionized water with different types and concentration of organic acids. The solubility of DDT increased with increasing concentration of humic acid when the pH of the samples was low (adjusted to about 5.5). The effect flutters in the humic acid concentration range from 200 to 300?mg/L, in accordance with humic acid hydrophobicity, operationally measured as liquid surface tension. The findings correspond to trends previously reported in the literature. The trend of increasing solubility was not found using fulvic acid or low-molecular-weight aliphatic acids. No trend was found adding humic acid without adjusting the pH. The mechanism of enhanced solubility due to humic compounds can explain relatively high levels of DDT in ground water. The ground water samples, however, had a moderately high concentration of maximum 6?µg/L compared with a maximum of about 2300?µg/L in the water samples with humic acid in pure water.     

The influence of gelatin polypeptides,potassium, calcium and osmolality on the hypothermic perfusion of rabbit hearts

After a period of perfusion at 37 °C with a standard perfusate, rabbit hearts were cooled to +10 °C and perfused at this temperature for 5 hr with a variety of solutions. The hearts were then rewarmed to 37 °C and perfused again with the standard perfusate to assess heart function. The effects on subsequent normothermic function of including gelatin polypeptides (Haemaccel) and of increasing the osmolality and the concentrations of K⁺ and Ca²⁺ in the solutions used for hypothermic perfusion were studied. The best results were achieved with a noncolloidal electrolyte solution containing 20 mm K⁺ and 4.8 mm Ca²⁺ which gave an average maximum percentage recovery of function of 57.9 ± 7.1%. The addition of sufficient mannitol to raise the osmolality from 300 mOsm/Kg to 420 mOsm/Kg improved (but not significantly) the maximum percentage recovery of function to 61.2 ± 8.5%     

Solubility of Saturated Fatty Acids in Water at Elevated Temperatures

The solubility in water of saturated fatty acids with even carbon numbers from 8 to 18 was measured in the temperature range of 60 to 230°C and at a pressure of 5 or 15 MPa. The pressure had no significant effect on the solubility. The solubility of the fatty acids increased with increasing temperature. At temperatures higher than about 160°C, the logarithm of the solubility in mole fraction was linearly related to the reciprocal of the absolute temperature for each fatty acid, indicating that the water containing solubilized fatty acid molecules formed a regular solution at the higher temperatures. The enthalpy of a solution of the fatty acids in water, which was evaluated from the linear relationship at the given temperatures, increased linearly with the carbon number of the fatty acid.     

Physicochemical characteristics and toxicity of nickel oxide particles calcined at different temperatures

The physicochemical characteristics and cytotoxicity of two types of commercial nickel oxide particles (black and green nickel oxide) and five types of nickel oxide particles prepared by calcination of the black nickel oxide at 600–1000°C were studied. Thermal analysis with mass spectroscopy showed that the black nickel oxide particles contained approximately 1.4% impurity, which seemed to be basic nickel carbonate. The calcination treatment at 600°C increased the nickel content and decreased the oxygen content, but these remained constant in the particles treated at higher temperatures (700–1000°C) and in the green nickel oxide particles. The water solubility of black nickel oxide particles was markedly greater than that of the other particles, especially in the first 24 h after mixing with water. The solubility of the calcined particles decreased with increasing calcination temperature. The cytotoxicity of these particles was evaluated by the viability of rat alveolar macrophages and by the inhibition of cell proliferation in Chinese hamster ovary cells. The black nickel oxide was the most cytotoxic of the particles examined, and this may be attributable, at least in part, to a rapid dissolution of nickel from the contained impurity. The toxicity of the calcined particles decreased with increasing calcination temperature. These results indicate that water solubility, which depends on calcination temperature, modulates the acute cytotoxicity of nickel oxide particles.     

Optimizing the Production of Antioxidant and Antibacterial Alkaloids from Macleaya cordata by Subcritical Water Extraction Technology

In this work, the subcritical water extraction technology was used to extract alkaloids from Macleaya cordata, and the effects of extraction temperature and time on its yield were investigated to find the best extraction conditions. Moreover, the antioxidant capacity and antibacterial activity of Macleaya cordata extract were studied. Furthermore, through the single-factor method, it was found that properly increasing the extraction temperature and prolonging the extraction time was conducive to increasing alkaloid yield. Still, a considerable amount of alkaloids might be decomposed by heat, resulting in a decrease in their yield. The results showed that the optimal extraction temperature of alkaloids from Macleaya cordata with subcritical water is 190 °C, the time is 45 min, and the corresponding maximum yield is 35.19±0.12 mg/g (sanguinarine equivalent in raw materials). In addition, the antioxidation and bacteriostasis abilities of subcritical water extract are better than those of traditional hot water extract, indicating that it is a feasible method to extract alkaloids from Macleaya cordata with subcritical water.     

Effect of Sorbed Water on the Thermal Stability of Soybean Protein

A soybean protein isolate (SPI), and its β-conglycinin and glycinin componets were obtained from defatted soybean flour by applying dissolution and precipitation based on the difference in their solubility depending on each isoelectric point. The purity evaluated by SDS–PAGE of the β-conglycinin and glycinin preparations was about 84% and 80%, respectively, resulting in a clear difference in the pH dependence on solubility. A BET plot derived from the water sorption isotherm at 25 °C showed that the amount of the monolayer adsorption of these preparations was about 6–9%, the value for the β-conglycinin preparation being about 1.5 times higher than that for the glycinin preparation. The β-conglycinin and glycinin preparations were respectively denatured at around 75 °C and 86 °C in the presence of excess water, whereas the denaturation temperature of both preparations was markedly increased by decreasing sorbed water content below 40%, corresponding well with the unfrozen water content.     

Effect of ammonia and urea treatments on digestibility and nitrogen content of dehydrated lucerne

Dehydrated lucerne of low (L: 0.53), normal (N: 0.55) and high (H: 0.73) in vivo dry matter (DM) digestibility were treated with ammonia or urea to study the effects on in situ and pepsin-cellulase DM digestibilities, water solubility and nitrogen content (Experiments 1, 2, 4) and on cell wall composition and degradability (Experiment 3). (1) N lucerne was treated with 30 g NH₃ kg⁻¹ DM for 1 to 12 weeks at 30°C and 2 to 6 days at 80°C; (2) L, N and H lucerne were treated with increasing ammonia levels: 15 to 100 g kg⁻¹ DM for 3 weeks at 30°C and 4 days at 80°C; (3) L, N and H lucerne were treated with 60 g NH₃ kg⁻¹ DM for 3 weeks at 30°C and 4 days at 80°C; (4) L, N and H lucerne were treated with 60 g urea kg⁻¹ DM without addition of urease for 3 and 6 weeks at 30°C. All treatments were carried out at 40% humidity.In situ and pepsin-cellulase DM digestibilities increased significantly (P < 0.05) with the duration of treatment (up to 3 weeks at 30°C and 4 days at 80°C) and with the level of ammonia (P < 0.01) (up to 30 g kg⁻¹ DM). The greatest improvements (similar at both temperatures) were for L, N and H of 7.3, 7.2 and 3.9 points for in situ and of 10.6, 11.3 and 6.3 points for cellulase digestibilities, respectively. Water solubility also increased with duration of treatment and level of ammonia (P < 0.01) and was greater at 80°C than at 30°C. Urea treatment significantly improved (P < 0.01) digestibilities and water solubility but the doubling of treatment duration had no influence. The degree of ureolysis was only 50 to 60%. Ammonia and urea treatments considerably increased (P < 0.01) nitrogen content.Treatment with 60 g NH₃ kg⁻¹ DM induced a decrease in ethanol insoluble residue content, which was significant (P < 0.01 for L and N, P < 0.05 for H) at 80°C but not at 30°C, and was greater for L and N than for H (about 12 and 5 points, respectively). This decrease was essentially due to solubilisation of hemicelluloses (− 15%) and uronic acids (− 26%). Thus, at 30°C, the chemical solubility of the cell wall was lower than at 80°C for the same total increase in microbial degradation. This result indicates that other phenomena are involved, such as an increase in cell wall porosity and consequently improved accessibility of cell wall polysaccharides to glycolytic enzymes.     

Oral formulation of a novel antiviral agent,PG301029, in a mixture of Gelucire 44/14 and DMA (2∶1, wt/wt)

To develop an oral formulation for PG301029, a novel potent agent for the treatment of Hepatitis C virus infection, that not only has very low aqueous solubility but also degrades rapidly in water. The solubility of PG301029 was determined in water, various aqueous media, and several neat organic solvents. The stability of PG301029 was monitored at room temperature in buffess for 4 days, and in several neat organic solvents for up to 8 mo. Drug concentrations were measured by high-performance liquid chromatography (HPLC). Based on solubility and stability data, Gelucire 44/14 and DMA (N,N-dimethylacetamide) at a weight ratio of 2 to 1 were chosen as the formulation vehicle. After the vehicle was prepared, it was maintained in liquid form at ∼40°C until the PG301029 was dissolved. The final formulation product was a semisolid at room temperature. The bioavailability of the formulation was tested on 4 female BALB/c mice. PG301029 is insoluble in all tested aqueous media, while its solubility is promising in DMA. This compound is unstable in aqueous media and some organic solvents; however, it is stable in DMA. This proposed formulation is able to hold up to 10 mg/mL of drug and is stable at 4°C. The shelf life for this formulation stored at 4°C is extrapolated to be greater than 4 years. This formulation dramatically increases the bioavailability of PG301029. This nonaqueous formulation solves the stability, solubility, and bioavailability problems for PG301029. This semisolid formulation can easily be incorporated into soft elastic capsules.     

Enhanced solubility of proteins and peptides in nonpolar solvents through hydrophobic ion pairing

A new technique for enhancing the solubility of peptides and proteins in organic solvents is described. Complexation of polypeptides with stoichiometric amounts of an anionic detergent, such as sodium dodecyl sulfate (SDS), produces diminished aqueous solubility, but enhanced solubility in organic solvents. Consequently, the partitioning of a polypeptide into a nonpolar solvent can be increased by two to four orders of magnitude. In the case of an insulin–SDS complex, the solubility in 1-octanol is more than tenfold greater than in water. In 1-octanol, the native structure of insulin remains intact, as determined by CD spectroscopy, and the thermal denaturation temperature (T_m) is increased by approximately 50°C relative to unfolding in water. Finally, peptides and proteins can be extracted back into an aqueous phase provided the chloride concentration is sufficient to displace bound detergent molecules. © 1993 John Wiley & Sons, Inc.     

Biosorption of uranium by cross-linked and alginate immobilized residual biomass from distillery spent wash

Residual biomass from a whiskey distillery was examined for its ability to function as a biosorbent for uranium. Biomass recovered and lyophilised exhibited a maximum biosorption capacity of 165–170?mg uranium/g dry weight biomass at 15?°C. With a view towards the development of continuous or semi-continuous flow biosorption processes it was decided to immobilize the material by (1) cross-linking with formaldehyde and (2) introducing that material into alginate matrices. Cross-linking the recovered biomass resulted in the formation of a biosorbent preparation with a maximum biosorption capacity of 185–190?mg/g dry weight biomass at 15?°C. Following immobilization of biomass in alginate matrices it was found that the total amount of uranium bound to the matrix did not change with increasing amounts of biomass immobilized. It was found however, that the proportion of uranium bound to the biomass within the alginate-biomass matrix increased with increasing biomass concentration. Further analysis of these preparations demonstrated that the alginate-biomass matrix had a maximum biosorption capacity of 220?mg uranium/g dry weight of the matrix, even at low concentrations of biomass.     

Increasing temperature decreases the predatory effect of the intertidal shanny Lipophrys pholis on an amphipod prey

Interactions between Lipophrys pholis and its amphipod prey Echinogammarus marinus were used to investigate the effect of changing water temperatures, comparing current and predicted mean summer temperatures. Contrary to expectations, predator attack rates significantly decreased with increasing temperature. Handling times were significantly longer at 19° C than at 17 and 15° C and the maximum feeding estimate was significantly lower at 19° C than at 17° C. Functional‐response type changed from a destabilizing type II to the more stabilizing type III with a temperature increase to 19° C. This suggests that a temperature increase can mediate refuge for prey at low densities. Predatory pressure by teleosts may be dampened by a large increase in temperature (here from 15 to 19° C), but a short‐term and smaller temperature increase (to 17° C) may increase destabilizing resource consumption due to high maximum feeding rates; this has implications for the stability of important intertidal ecosystems during warming events.     

Effects of temperature and water potential on the germination of muskmelon cultivars

The rate and final germination of four muskmelon cultivars (Cucumis melo) were examined in response to incubation temperatures of 20, 26 and 32°C. Germination was also characterised at 26°C pr 32°C over a range of water potentials from 0 to - 1000 kPa achieved with solutions of polyethylene glycol. The germination of one cultivar, TAM-Uvalde, was consistently slower at 20°C than at 26°C or 32°C. The other three cultivars, Perlita, TAM-Dew and Greenflesh, were inhibited by incubation at 32°C. However, the germination responses of cvs Perlita, TAM-Dew and Greenflesh at 26°C or 32°C improved as water potentials were reduced from 0 to – 200 or – 400 kPa. Cv. TAM-Uvalde was extremely sensitive to water stress and failed to germinate at water potentials below – 600 kPa when incubated at 26°C. The inhibition of germination at low water potentials was partially reversed in all cultivars by increasing the incubation temperature from 26°C to 32°C. It is suggested that the inhibition of germination at 0 kPa (distilled water) was due to a seed coat-mediated barrier to oxygen that could be reversed by removal of the seed coat or exposure to an oxygen-enriched atmosphere.     

Impact of some environmental factors on growth and production of ochratoxin A of/by <Emphasis Type="Italic">Aspergillus tubingensis,A. niger</Emphasis>, and <Emphasis Type="Italic">A. carbonarius</Emphasis> isolated from moroccan grapes

The effects of temperature, water activity (a_w), incubation time, and their combinations on radial growth and ochratoxin A (OTA) production of/by eight Aspergillus niger aggregate strains (six A. tubingensis and two A. niger) and four A. carbonarius isolated from Moroccan grapes were studied. Optimal conditions for the growth of most studied strains were shown to be at 25°C and 0.95 a_w. No growth was observed at 10°C regardless of the water activity and isolates. The optimal temperature for OTA production was in the range of 25°C∼30°C for A. carbonarius and 30°C∼37°C for A. niger aggregate. The optimal a_w for toxin production was 0.95∼0.99 for A. carbonarius and 0.90∼0.95 for A. niger aggregate. Mean OTA concentration produced by all the isolates of A. niger aggregate tested at all sampling times shows that maximum amount of OTA (0.24 μg/g) was produced at 37°C and 0.90 a_w. However, for A. carbonarius, mean maximum amounts of OTA (0.22 μg/g) were observed at 25°C and 0.99 a_w. Analysis of variance showed that the effects of all single factors (a_w, isolate, temperature and incubation time) and their interactions on growth and OTA production were highly significant.     

Biodeposit production by the mussel Mytilus edulis L. on rocky shores

Seasonal changes in the amount of biodeposit (faeces and pseudofaeces) produced by the mussel Mytilus edulis L., which is one of the representative suspension-feeders in the rocky intertidal and shallow subtidal regions of Mutsu Bay, were studied in the laboratory. The effects of water temperature, light, food concentration, flow rate, body size, age, and spawning on biodeposit production were investigated. More biodeposit was produced in summer than in other seasons. Throughout the year, the amount of biodeposit was positively correlated with body size. Relatively more biodeposit was produced by smaller than by larger individuals. A M. edulis population living in one square meter was estimated to produce 9.20 kg of faeces and 2.71 kg of pseudofaeces per year (dry wt). More biodeposit was produced at water temperatures of 17.6–20.2° C than at 4.5–7.6° C and 25.2–26.0° C. The optimum temperature for biodeposit production was found to be ≈ 20.0 °C. When kept in the dark, M. edulis produced more biodeposit than in the light. When food concentration is increased, more psuedofaeces are produced; the amount of faeces, however, remains constant. With increasing flow rate, the amount o f biodeposit per h increased but the biodeposition rate decreased. Larger amounts of faeces and smaller amounts of pseudofaeces were produced by younger mussels than by older ones of a similar size. Spawning also affected biodeposit production.     

Thermal sensitivity of a Neotropical amphibian (Engystomops pustulosus) and its vulnerability to climate change

A species’ thermal sensitivity and its exposure to climate variation are key components in the prediction of its vulnerability to climate change. We tested the thermal sensitivity of a tropical amphibian that lives in a mild constant climate in which the thermal tolerance range is expected to closely match the experienced environmental temperature. The air temperature that this species is exposed to varies between 21.9 and 31.6°C with an annual mean of 27.2°C. We estimated the microhabitat water temperature variation under vegetation shade, which buffers the temperature by 1.8°C in relation to that of the air, and with open canopy, where the water was 1.9°C warmer than the air temperature. With broods of tadpoles split into five treatments (15°C, 21°C, 28°C, 31°C, and 33°C), we estimated the critical thermal maximum (CTMax) and critical thermal minimum (CTMin) after at least 7 days of acclimation. Both CTMax (42.3°C) and CTMin (11.8°C) were more extreme than the temperature range estimated for the field. We estimated the optimum temperature (T_o = 28.8°C) and the thermal performance breadth (range: 23.3–34.1°C) based on growth rate (g/day). The animals were able to acclimate more extensively to cold than to warm temperatures. These performance curve traits closely matched the air temperature. The estimated vulnerability varied according to the microhabitat prediction model used. The combination of tadpole data on thermal sensitivity and macro‐ and microhabitat variation provides a necessary framework to understand the effects of climate change on tropical amphibians.     

Synergistic effect of PEG-400 and cyclodextrin to enhance solubility of progesterone

Conclusion  PEG-400, polysorbate 80, and 2 CDs (Trappsol HPB and Captisol) were used in an attempt to improve the aqueous solubility of a model hydrophobic drug, progesterone. The aqueous solubility of progesterone improved significantly from 0.007 mg/mL by the addition of PEG-400, CDs, and polysorbate 80. In systems containing various amounts of PEG-400 and 3% Trappsol HPB in water (% wt/wt), the theoretical solubility was calculated by adding the solubilities in the individual systems. The observed solubility values were up to 96% higher than the theoretical values. The effect of synergism was significant in 5% to 50% PEG-400/water systems containing Trappsol HPB. Systems containing Captisol did not show such synergistic effects. In general, the addition of polysorbate 80 to the PEG-400/water systems containing CDs affected synergism negatively.