Electric field control of lipase membrane activity

Lipase (EC 3.1.1.3., from Pseudomonas sp.) was entrapped in collagen membrane containing liquid crystal (4-methoxybenzilidene-4′-n-butylaniline). The activity of the lipase–liquid crystal membrane at an applied voltage of 4 V was 3.4 compared to a membrane tested without imposition of an external electric field. A linear relationship was observed between the activity of the lipase–liquid crystal membrane and the current. The apparent Michaelis constant (K′_m) of the lipase–liquid crystal membrane under electric field was identical to that of the membrane under ordinary condition. Activation of the lipase–liquid crystal membrane was observed repeatedly, i.e., activation in the presence of an electric field and reversion to a basal level upon removal of the field occurred cyclically. Activity control of immobilized enzymes is desirable for switching devices of a bioreactor. Possible mechanisms of the lipase activation by electric field are discussed.     

Comparative study of performances of lipase immobilized asymmetric polysulfone and polyether sulfone membranes in olive oil hydrolysis

In the present study, lipase was immobilized via glutaraldehyde crosslinking on the polysulfone and polyether sulfone asymmetric membranes. The results indicated that the overall immobilization of lipase is related to the hydrophobicity of the membrane material and thus higher immobilization is achieved for polysulfone membrane. The evidence of immobilization is done by XRD, SEM, contact angle and porometric studies. Hydrolytic activity of lipase in immobilized form is determined by hydrolyzing olive oil and compared with hydrolytic activity of free lipase. The effect of different reaction parameters viz., temperature, pH, substrate concentration, and incubation time on the lipase activity is investigated. The observed maximum reaction rate (V(max)) and Michaelis-Menten constant (K(m)) of polysulfone and polyether sulfone is determined.     

Lipolytic activity of suspended and membrane immobilized lipase originating from indigenous Burkholderia sp. C20

In this work, a simple, inexpensive, and efficient method of preparing immobilized lipase is presented. The lipase originating from a newly isolated indigenous strain Burkholderia sp. C20 was immobilized onto cellulose nitrate (CN) membrane via filtration. The CN-immobilized lipase was able to retain 60% of its original activity after repeated uses for nine times. The thermal stability of the lipase was also slightly improved after immobilization. The optimal reaction conditions of CN-lipase were pH 9.0 and 55 degrees C, which are similar to those for the suspended lipase. Both suspended and immobilized lipase could hydrolyze the six oil substrates examined, while immobilized lipase displayed less specificity over the oil substrates. Kinetic analysis shows that the dependence of lipolytic activity of both suspended and immobilized lipase on oil substrate concentration can be described by Michaelis-Menten model with good agreement. The estimated kinetic constants for suspended lipase (v(max)=243.9 U/mg, K(m)=0.024 mM) and immobilized lipase (v(max)=32.8 U/mg, K(m)=5.61 mM) were quite different. Employment of immobilization seemed to result in a decrease in v(max) and an increase in K(m), most likely due to the mass transfer resistance arising from formation of micelles during the lipase immobilization process.     

Covalent immobilization of lipase from Candida rugosa onto poly(acrylonitrile-co-2-hydroxyethyl methacrylate) electrospun fibrous membranes for potential bioreactor application

A simple way of fabricating enzymatic membrane reactor with high enzyme loading and activity retention from the conjugation between nanofibrous membrane and lipase was devised. Poly(acrylonitrile-co-2-hydroxyethyl methacrylate) (PANCHEMA) was electrospun into fibrous membrane and used as support for enzyme immobilization. The hydroxyl groups on the fibrous membrane surface were activated with epichlorohydrin, cyanuric chloride or p-benzoquinone, respectively. Lipase from Candida rugosa was covalently immobilized on these fibrous membranes. The resulted bioactive fibrous membranes were examined in catalytic efficiency and activity for hydrolysis. The observed enzyme loading on the fibrous membrane with fiber diameter of 80–150 nm was up to 1.6% (wt/wt), which was as thrice as that on the fibrous membrane with fiber diameter of 800–1000 nm. Activity retention for the immobilized lipase varied between 32.5% and 40.6% with the activation methods of hydroxyl groups. Stabilities of the immobilized lipase were obviously improved. In addition, continuous hydrolysis was carried out with an enzyme-immobilized fibrous membrane bioreactor and a steady hydrolysis conversion (3.6%) was obtained at a 0.23 mL/min flow rate under optimum condition.     

Ultrafiltration membranes as carriers for lipase immobilization.

The feasibility of directly incorporating lipase from Rhizopus in the interior of poly(vinyl chloride) ultrafiltration membranes during the phase inversion process for their manufacturing has been demonstrated. The obtained membranes used for plant oil hydrolysis have shown better time stability as compared with those of lipase immobilized by adsorption. The specific activity of entrapped lipase achieves values higher than those of the soluble one. The activity of immobilized lipase is strongly affected by the rate of removing fatty acids from the interior of the membrane.     

Lipase kinetics: hydrolysis of triacetin by lipase from Candida cylindracea in a hollow-fiber membrane reactor

The aptitude of a hollow-fiber membrane reactor to determine lipase kinetics was investigated using the hydrolysis of triacetin catalyzed by lipase from Canadida cylindracea as a model system. The binding of the lipase to the membrane appears not to be very specific (surface adsorption), and probably its conformation is hardly altered by immobilization, resulting in an activity comparable to that of the enzyme in its native form. The reaction kinetics defined on the membrane surface area were found to obey Michaelis-Menten kinetics. The specific activity of the lipase in the membrane reactor was found to be significantly higher than in an emulsion reactor. The activity and stability of the enzyme immobilized on a hydrophilic membrane surface seem not to be influenced significantly by the choice of the membrane material. The hollow-fiber membrane reactor is a suitable tool to assess lipase kinetics in a fast and convenient way.     

Use of stable emulsion to improve stability, activity, and enantioselectivity of lipase immobilized in a membrane reactor

The enantiocatalytic performance of immobilized lipase in an emulsion membrane reactor using stable emulsion prepared by membrane emulsification technology was studied. The production of optical pure (S)-naproxen from racemic naproxen methyl ester was used as a model reaction system. The O/W emulsion, containing the substrate in the organic phase, was fed to the enzyme membrane reactor from shell-to-lumen. The enzyme was immobilized in the sponge layer (shell side) of capillary polyamide membrane with 50 kDa cut-off. The aqueous phase was able to permeate through the membrane while the microemulsion was retained by the thin selective layer. Therefore, the substrate was kept in the enzyme-loaded membrane while the water-soluble product was continuously removed from the reaction site. The results show that lipase maintained stable activity during the entire operation time (more than 250 h), showing an enantiomeric excess (96 +/- 2%) comparable to the free enzyme (98 +/- 1%) and much higher compared to similar lipase-loaded membrane reactors used in two-separate phase systems (90%). The results demonstrate that immobilized enzymes can achieve high stability as well as high catalytic activity and enantioselectivity.     

Preparation of PVA/chitosan lipase membrane reactor and its application in synthesis of monoglyceride

Polyvinyl alcohol (PVA)/chitosan (CS) composite lipase membrane was prepared in this paper, which was used for enzymatic processing of fats and oils. The parameters, such as concentration of lipase, pH, and cross-linking agent as well as metal ions, which influence the immobilization of lipase in membrane, were optimized. The immobilized activity of lipase was 2.64 IU/cm² with recovery of 24%. The membrane reactor was used in a two-phase system reaction to synthesize monoglyceride (MG) by hydrolysis of palm oil, which was reused for at least nine batches with yield of 32–50%.     

Lipase production by free and immobilized protoplasts of Sporotrichum (Chrysosporium) thermophile Apinis

Summary Production of lipase by free and alginate-entrapped protoplasts was studied in batch culture. Cell-wall-degrading enzymes Novozym 234 and cellulase CP improved lipase secretion of normal mycelium by 25%–100%. The protoplast-regenerated mycelium exhibited several-fold higher lipase activity in batch replacements in TRIS buffer over normal spore-derived mycelium. The specific lipase activity of immobilized protoplasts was about four times higher than normal mycelial beads. Protoplasts beads were stable and retained high enzyme activity even after three buffer replacements lasting 120 h; TRIS buffer was better than acetate or normal glucose medium. A minimum of 8 h regeneration period was necessary for lipase synthesis. Triolein, olive oil, tributyrin and oleic acid butylester were able to induce lipase in immobilized protoplasts. Tween 80 enhanced lipase activity of the immobilized protoplasts. Partially degraded immobilized mycelium was nearly as effective as normal immobilized protoplasts for lipase secretion. Both free and immobilized protoplasts could be reused for up to 200 h with some loss in enzyme activity.     

Optimization of lipase pretreatment prior to lipase immobilization to prevent loss of activity

In our previous work, a method of pretreating lipase was developed to prevent loss of its activity during covalent immobilization. In this study, Rhizopus oryzae lipase was pretreated before immobilization and then immobilized on a silica gel surface. The effects of the various materials and conditions used in the pretreatment stage on the activity of immobilized lipase were investigated. Immobilized lipase pretreated with 0.1% of soybean oil had better activity than those pretreated with other materials. The optimal temperature, agitation speed, and pretreating time for lipase pretreatment were determined to be 40 degrees C, 200 rpm, and 45 min, respectively. The activity of immobilized soybean oil pretreated lipase was 630 U/g matrix, which is 20 times higher than that of immobilized non-pretreated lipase. In addition, immobilized lipase activity was maintained at levels exceeding 90% of its original activity after 10 reuses.     

Immobilization of lipase within carbon nanotube–silica composites for non-aqueous reaction systems

The immobilization of lipases within sol–gel derived silica, using multi-walled carbon nanotubes (MWNTs) as additives in order to protect the inactivation of lipase during sol–gel process and to enhance the stability of lipase, was investigated. Three sol–gel immobilized lipases (Candida rugosa, Candida antarctica type B, Thermomyces lanuginosus) with 0.33% (w/w) MWNT showed much higher activities than lipase immobilized without MWNT. The influence of MWNT content and MWNT shortened by acid treatment in the sol–gel process on the activity and stability of immobilized C. rugosa lipase was also studied. In hydrolysis reaction, immobilized lipase containing 1.1% pristine MWNT showed 7 times higher activity than lipase immobilized without MWNT. The lipase coimmobilized with 2.7% shortened MWNT showed 10 times higher activity in esterification reaction, compared with lipase immobilized without MWNT. The lipase coimmobilized with 2.7% shortened MWNT retained 96% of initial activity after 5 times reuse, while the lipase immobilized without MWNT was fully inactivated under the same condition.     

介孔分子筛MCM-41固定中性脂肪酶条件的研究

以介孔分子筛MCM-41材料为载体,采用物理吸附法对中性脂肪酶进行了固定化处理,并研究不同条件对固定化脂肪酶催化活性的影响,从而得到该种材料对脂肪酶的最佳固定化条件。给酶量为45960 U/g,固定化温度为45℃,pH值为7.5,时间为3 h,此时固定化酶的活力约为4666 U/g。固定化酶和游离酶的最适反应温度都为40℃,最适pH值为7.5,比游离酶低。固定化酶温度稳定性和pH稳定性较游离酶有所提高。     

固定化脂肪酶催化毛油合成生物柴油

本研究开发了一种用石油醚提取毛油的工艺,研究了以提取的毛油和甲醇为原料,用固定化Candida sp.99-125脂肪酶催化合成脂肪酸甲酯(FAMEs)的可行性。同时考察了磷脂对固定化酶活性、反应起始速率、固定化酶使用批次的影响以及毛油和精炼油对固定化酶使用批次等的影响。研究结果表明,用磷脂质量分数为1%的石油醚悬液浸泡过的脂肪酶比仅用石油醚浸泡过的脂肪酶初始转酯化速率显著下降。当大豆油中无磷脂时,15min时FAMEs的产率为26.2%;磷脂质量分数为5%时,FAMEs降为12.4%。当大豆油中磷脂质量分数小于1%时,固定化酶使用10个批次,FAMEs产率无明显变化。固定化脂肪酶催化石油醚浸提得到的大豆和小桐子毛油,经过10个批次反应FAMEs产率都保持在70%以上,该固定化酶直接催化毛油生产生物柴油具有良好的工业化前景。     

溶胶凝胶法固定化黑曲霉脂肪酶的性质研究

近年来溶胶-凝胶法固定脂肪酶已成为研究热点。选用TMOS、MTMS、ETMS和PTMS 4种硅烷试剂对黑曲霉脂肪酶进行了固定化研究。固定化的最佳配方为ETMS/TMOS=5：1、水与硅烷试剂分子比为8;固定化脂肪酶的固定率为80.2%、相对活性为136.3%;以乳化橄榄油作为底物,在50℃和pH4.0的条件下,固定化脂肪酶与游离脂肪酶K_m分别为1.899×10^-4M和2.789×10^-4M;最适反应pH均为pH4.0,固定化脂肪酶在pH4.0~pH5.5之间其活性能保持95%以上;固定化脂肪酶最适反应温度为60℃,较游离脂肪酶提高了10℃;固定化脂肪酶的酸碱稳定性和热稳定性较非固定化酶有显著的提高。固定化脂肪酶的使用寿命和保存稳定性良好,使用12次后仍能够保留71.7%活性,在室温避光条件下保存180天后仍可保留79.2%活性。     

硅藻土固定中性脂肪酶的制备及其性质

以硅藻土为载体,采用吸附法,对脂肪酶进行固定化,研究了固定化条件对固定化脂肪酶的催化活性的影响,得到最佳的固定化条件：给酶量为33374U/g,固定化温度为35℃,pH值为7.5,时间为4h,此时固定化酶的活力约为5833U/g载体。固定化酶的热稳定性较游离酶有了很大的提高,其在80℃以下能保持80%以上的酶活,而游离酶60℃残余酶活仅为5%。最适反应温度和最适pH值也分别由游离酶的40℃上升至50℃和由7上升到7.5。对固定化中的中性脂肪酶在生物柴油合成中的应用也进行了初步研究。     

Influence of ionic liquids as additives on sol–gel immobilized lipase

The immobilization of lipase from Candida rugosa, using ionic liquids as additives to protect the inactivation of lipase by released alcohol and shrinking of gel during sol–gel process, was investigated. The influence of various factors, such as structure of ionic liquids, content of ionic liquids and types of precursor in the sol–gel process on the activity and stability of immobilized lipase was also studied. The highest hydrolytic activity of immobilized lipase was obtained when the hydrophilic ionic liquid, [C₂mim][BF₄], was used as an additive, while the highest stability of immobilized lipase was obtained by using hydrophobic ionic liquid, [C₁₆mim][Tf₂N]. Therefore, the binary mixtures of these ionic liquids as additives were used to obtain the optimal immobilized lipase, which shows both high activity and stability. The hydrolysis and esterification activities of lipase co-immobilized with the mixture of 1:1 at molar ratio of [C₂mim][BF₄] and [C₁₆mim][Tf₂N] were 10-fold and 14-fold greater than in silica gel without ionic liquids (ILs), respectively. After 5 days incubation of this immobilized lipase in n-hexane at 50 °C, 84% of initial activity was remained, while the residual activity of the lipase immobilized without ILs was 28%.     

Electrospun polyacrylonitrile nanofibrous membranes for lipase immobilization

Polyacrylonitrile (PAN) nanofibers could be fabricated by electrospinning with fiber diameter in the range of 150–300 nm, providing huge surface area for enzyme immobilization and catalytic reactions. Lipase from Candida rugosa was covalently immobilized onto PAN nanofibers by amidination reaction. Aggregates of enzyme molecules were found on nanofiber surface from field emission scanning electron microscopy and covalent bond formation between enzyme molecule and the nanofiber was confirmed from FTIR measurements. After 5 min activation and 60 min reaction with enzyme-containing solution, the protein loading efficiency was quantitative and the activity retention of the immobilized lipase was 81% that of free enzyme. The mechanical strength of the NFM improved after lipase immobilization where tensile stress at break and Young's modulus were almost doubled. The immobilized lipase retained >95% of its initial activity when stored in buffer at 30 °C for 20 days, whereas free lipase lost 80% of its initial activity. The immobilized lipase still retained 70% of its specific activity after 10 repeated batches of reaction. This lipase immobilization method shows the best performance among various immobilized lipase systems using the same source of lipase and substrate when considering protein loading, activity retention, and kinetic parameters.     

Silanized palygorskite for lipase immobilization

Lipase from Candida lipolytica has been immobilized on 3-aminopropyltriethoxysilane-modified palygorskite support. Scanning electron micrographs proved the covalently immobilization of C. lipolytica lipase on the palygorskite support through glutaraldehyde. Using an optimized immobilization protocol, a high activity of 3300 U/g immobilized lipase was obtained. Immobilized lipase retained activity over wider ranges of temperature and pH than those of the free enzyme. The optimum pH of the immobilized lipase was at pH 7.0–8.0, while the optimum pH of free lipase was at 7.0. The retained activity of the immobilized enzyme was improved both at lower and higher pH in comparison to the free enzyme. The immobilized enzyme retained more than 70% activity at 40 °C, while the free enzyme retained only 30% activity. The immobilization stabilized the enzyme with 81% retention of activity after 10 weeks at 30 °C whereas most of the free enzyme was inactive after a week. The immobilized enzyme retains high activity after eight cycles. The kinetic constants of the immobilized and free lipase were also determined. The K_m and V_max values of immobilized lipase were 0.0117 mg/ml and 4.51 μmol/(mg min), respectively.     

Improvement of lipase activity by synergistic immobilization on polyurethane and its application for large-scale synthesizing vitamin A palmitate

Abstract

We have developed an improved and effective method to immobilize lipase on hydrophobic polyurethane foam (PUF) with different modifications. PUF was treated with hydrochloric acid to increase the active sites and then the active carboxyl groups and amino groups were exposed. Enzyme activity of lipase immobilized on PUF-HCL (8000?U/g) was 50% higher than that of lipase immobilized on PUF (5300?U/g). There is an increase in the activity of the immobilized lipase on AA/PEI-modified support (115,000?U/g), a 2.17-fold increase compared to lipase immobilized on the native support was observed. The activity of immobilized lipases was dependent on the PEI molecular weight, with best results from enzyme immobilized on PUF-HCL-AA/PEI (MW 70,000?Da, 12,800?U/g)), which was 2.41 times higher compared to that of the same enzyme immobilized on PUF. These results suggest that the activity of immobilized lipase is influenced by the support surface properties, and a moderate support surface micro-environment is crucial for improving enzyme activity. Finally, the immobilized lipase was used for the production of vitamin A palmitate. The immobilized lipase can be reused for up to 18 times with a conversion rate above 90% for 12?h in a 3?L bioreactor.

• Research highlights

• An efficient immobilization protocol on polyurethane foam was developed

• Polyethyleneimine and acetic acid were used to regulate the micro-environment concurrently

• The activity of lipase immobilized on PUF-HCL-AA/PEI was improved by 2.41 times

• Immobilized lipase exhibited excellent operational stability for vitamin A palmitate synthesis

     

Evaluation of cellulose-binding domain fused to a lipase for the lipase immobilization

A cellulose-binding domain (CBD) fragment of a cellulase gene of Trichoderma hazianum was fused to a lipase gene of Bacillus stearothermophilus L1 to make a gene cluster for CBD-BSL lipase. The specific activity of CBD-BSL lipase for oil hydrolysis increased by 33% after being immobilized on Avicel (microcrystalline cellulose), whereas those of CBD-BSL lipase and BSL lipase decreased by 16% and 54%, respectively, after being immobilized on silica gel. Although the loss of activity of an enzyme immobilized by adsorption has been reported previously, the loss of activity of the CBD-BSL lipase immobilized on Avicel was less than 3% after 12 h due to the irreversible binding of CBD to Avicel.