Poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate)-based biopolymer systems

Biodegradable biopolymers attract much attention in biology and medicine due to its wide application. The present review considers a biodegradable and biocompatible polymer of bacterial origin, poly(3-hydroxybutyrate), which has wide perspectives in medicine and pharmaceutics. It highlights basic properties of biopolymer (biodegradability and biocompatibility) and also biopolymer systems: various materials, devices and compositions based on the biopolymer. Application of poly(3-hydroxybutyrate)-based biopolymer systems in medicine as surgical implants, in bioengineering as cell culture scaffolds, and in pharmacy as novel drug dosage forms and drug systems are also considered.     

Biodegradation kinetics of poly(3-hydroxybutyrate)-based biopolymer systems

The aim of this study was to evaluate and to compare the long-term kinetics curves of biodegradation of poly(3-hydroxybutyrate) (PHB), its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and a PHB/polylactic acid composite. The total weight loss and the change of average viscosity molecular weight were used as the parameters reflecting the biodegradation degree. The rate of biodegradation was analyzed in vitro in the presence of lipase and in vivo after film implantation in animal tissues. The morphology of the PHB film surface was studied by the atomic force microscopy technique. It was shown that PHB biodegradation involves both polymer hydrolysis and its enzymatic biodegradation. The results obtained in this study can be used for the development of various PHB-based medical devices.     

New poly(3-hydroxybutyrate)-based systems for controlled release of dipyridamole and indomethacin

New poly(3-hydroxybutyrate)-based systems for controlled release of anti-inflammatory and anti-thrombogenic drugs have been studied. The release occurs via two mechanisms (diffusion and degradation) operating simultaneously. Dipyridamole and indomethacin diffusion processes determine the rate of the release at the early stages of the contact of the system with the environment (the first 6–8 h). The coefficient of the release diffusion of a drug depends on its nature, the thickness of the poly(3-hydroxybutyrate) films containing the drug, the concentrations of dipyridamole and indomethacin, and the molecular weight of the poly(3-hydroxybutyrate). The results obtained are critical for developing systems of release of diverse drugs, thus, enabling the attainment of the requisite physiological effects on tissues and organs of humans.     

Sustained release of the antitumor drug paclitaxel from poly(3-hydroxybutyrate)-based microspheres

The development of sustained release formulations based on biodegradable polymers is a promising trend in modern pharmacology. Polyhydroxyalkanoates (PHA) attract increasing attention due to their biodegradability and high biocompatibility, which make them suitable for the development of novel drug dosage forms. We have produced poly(3-hydroxybutyrate) (PHB)-based microspheres loaded with the antitumor drug paclitaxel and investigated morphology, drug release kinetics and the effect of these microspheres on tumor cells in vitro. The data on the kinetics of drug release, biocompatibility and biological activity of the biopolymer microspheres in vitro have demonstrated that the studied system of prolonged drug release had lower toxicity and higher efficiency compared to the traditional dosage forms of paclitaxel.     

Degradation of poly(3-hydroxybutyrate) by poly(3-hydroxybutyrate) depolymerase from Alcaligenes faecalis T1

The extracellular poly(3-hydroxybutyrate) depolymerase purified from Alcaligenes faecalis T₁ has two disulfide bonds, one of which appears to be necessary for the full enzyme activity. This depolymerase hydrolyzed not only hydrophobic poly(3-hydroxybutyrate) but also water-soluble trimer and larger oligomers of D-(−)-3-hydroxybutyrate, regardless of their solubilities in water. Kinetic analyses with oligomers of various sizes indicated that the substrate cleaving site of the enzyme consisted of four subsites with individual affinities for monomer units of the substrate. Analyses of the hydrolytic products of oligomers, which had labeled D-(−)-3-hydroxybutyrate at the hydroxy terminus, showed that the enzyme cleaved only the second ester linkage from the hydroxy terminus of the trimer and tetramer, and acted as an endo-type hydrolase toward the pentamer and higher oligomers. The enzyme appeared to have a hydrophobic site which interacted with poly(3-hydroxybutyrate) and determined the affinity of the enzyme toward the hydrophobic substrate.     

A themogravimetric analysis for poly(3-hydroxybutyrate) quantification

Summary A simple and quick thermogravimetric analysis method has been suggested for poly(3-hydroxybutyrate) [PHB] quantification. During the analysis, a rapid thermal degradation of PHB occurred in the range of 250 to 320 °C. From the gravimetric change during the thermal degradation, we could quantify PHB contents of various samples. Due to the simultaneous thermal degradation of cellular materials, the PHB contents were estimated slightly higher than those by gas chromatographic analysis. We have proposed a way to compensate for such errors using a linear correlation to allow accurate determination of PHB contents.     

Production of green biodegradable plastics of poly(3-hydroxybutyrate) from renewable resources of agricultural residues

This work describes potential opportunities for utilization of agro-industrial residues to produce green biodegradable plastics of poly(3-hydroxybutyrate) (PHB). Wheat straws were examined with good efficacy of carbon substrates using Cupriavidus necator. Production was examined in separate hydrolysis and fermentation (SHF) in the presence and absence of WS hydrolysis enzymes, and in simultaneous saccharification and fermentation (SSF) with enzymes. Results showed that production of PHB in SSF was more efficient in terms of viable cell count, cell dry weight, and PHB production and yield compared to those of SHF and glucose-control cultures. While glucose control experiment produced 4.6 g/L PHB; SSF produced 10.0 g/L compared to 7.1 g/L in SHF when utilizing enzymes during WS hydrolysis. Results showed that most of sugars produced during the hydrolysis were consumed in SHF (~98 %) compared to 89.2 % in SSF. Results also demonstrated that a combination of glucose and xylose can compensate for the excess carbon required for enhancing PHB production by C. necator. However, higher concentration of sugars at the beginning of fermentation in SHF can lead to cell inhibition and consequently catabolite repressions. Accordingly, results demonstrated that the gradual release of sugars in SSF enhanced PHB production. Moreover, the presence of sugars other than glucose and xylose can eliminate PHB degradation in medium of low carbon substrate concentrations in SSF.     

Production of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by Ralstonia eutropha from soybean oil

High-yield production of polyhydroxyalkanoates (PHAs) by Ralstonia eutropha KCTC 2662 was investigated using soybean oil and γ-butyrolactone as carbon sources. In flask culture, it was shown that R. eutropha KCTC 2662 accumulated PHAs during the growth phase. The optimum carbon to nitrogen ratio (C/N ratio) giving the highest cell and PHA yield was 20 g-soybean oil/g-(NH(4))(2)SO(4). The 4-hydroxybutyrate (4HB) fraction in the copolymer was not strongly affected by the C/N ratio. In a 2.5-L fermentor, a homopolymer of poly(3-hydroxybutyrate) [P(3HB)] was produced from soybean oil as the sole carbon source by batch and fed-batch cultures of R. eutropha with dry cell weights of 15-32 g/L, PHA contents of 78-83 wt% and yields of 0.80-0.82 g-PHA/g-soybean oil used. By co-feeding soybean oil and γ-butyrolactone as carbon sources, a copolymer of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] could be produced with dry cell weights of 10-21 g/L, yields of 0.45-0.56 g-PHA/g-soybean oil used (0.39-0.50g-PHA/g-carbon sources used) and 4HB fractions of 6-10 mol%. Higher supplementation of γ-butyrolactone increased the 4HB fraction in the copolymer, but decreased cell and PHA yield.     

Acid-tolerant poly(3-hydroxybutyrate) hydrolases from moulds

Abstract We have isolated some mould strains that can grow under acid conditions with poly(3-hydroxybutyrate) (PHB) as sole carbon source, and secrete PHB hydrolases active at pH values at least down to 3. An improved assay method for such enzymes using a pH stat has been developed, and used to determine the dependence of reaction rate on enzyme and polymer concentrations. The implications of these kinetic properties of the PHB hydrolase for its mode of action are discussed.     

Carboxylate-induced degradation of poly(3-hydroxybutyrate)s

This communication shows that thermal degradation of poly(3-hydroxybutyrate)s (PHBs) is induced by carboxylate groups via a newly proposed E1cB mechanism. In PHBs with end groups in the form of carboxylic acid salts with Na+, K+, and Bu4N+ counterions, the proposed mechanism explains the dependence of thermal stability on the size of the counterion. The degradation via intermolecular alpha-deprotonation by carboxylate is suggested to be the main PHB decomposition pathway at moderate temperatures. The results of the present study show the ability to control the degradation and stability of poly(3-hydroxybutyrate)s as well as of their blends via chemical structure and concentration of the carboxylate polymer end groups.     

聚3-羟基丁酸酯（PHB）生物降解过程的研究

利用DS9701菌株对聚3-羟基丁酸酯(PHB)膜进行降解,对降解到不同程度的PHB膜采用扫描电子显微镜观察其表面形态结构的变化,并对其降解产物进行分析测定.结果表明,PHB的生物降解首先发生在PHB表面的非晶部分,随后结晶部分开始降解,并且降解首先发生在球晶的中心部分.DS9701菌株所产生的PHB解聚酶主要降解PHB的第二个酯键,降解产物为二聚体.     

Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in soils

[This corrects the article on p. 3236 in vol. 59.].     

Production of poly(3-hydroxybutyrate) from inexpensive substrates

Two inexpensive substrates, starch and whey were used to produce poly(3-hydroxybutyrate) (PHB) in fed-batch cultures of Azotobacter chroococcum and recombinant Escherichia coli, respectively. Oxygen limitation increased PHB contents in both fermentations. In fed-batch culture of A. chroococcum, cell concentration of 54 g l⁻¹ with 46% PHB was obtained with oxygen limitation, whereas 71 g l⁻¹ of cell with 20% PHB was obtained without oxygen limitation. The timing of PHB biosynthesis in recombinant E. coli was controlled using the agitation speed of a stirred tank fermentor. A PHB content of 80% could be obtained with oxygen limitation by increasing the agitation speed up to only 500 rpm.     

Mobilization of poly(3-hydroxybutyrate) in Ralstonia eutropha

Ralstonia eutropha H16 degraded (mobilized) previously accumulated poly(3-hydroxybutyrate) (PHB) in the absence of an exogenous carbon source and used the degradation products for growth and survival. Isolated native PHB granules of mobilized R. eutropha cells released 3-hydroxybutyrate (3HB) at a threefold higher rate than did control granules of nonmobilized bacteria. No 3HB was released by native PHB granules of recombinant Escherichia coli expressing the PHB biosynthetic genes. Native PHB granules isolated from chromosomal knockout mutants of an intracellular PHB (i-PHB) depolymerase gene of R. eutropha H16 and HF210 showed a reduced but not completely eliminated activity of 3HB release and indicated the presence of i-PHB depolymerase isoenzymes.     

Degradation of poly(3-hydroxybutyrate) by soil streptomycetes

The ability of 64 soil streptomycetes to degrade poly(3-hydroxybutyrate) [P(3HB)] was evaluated on Pridham and Lyons mineral salts agar medium overlayered with the same medium containing 0.2% P(3HB). The streptomycete isolates were grown on this overlayered medium and the degradation was detected by the formation of clear zone surrounding the growth. Four potent degrader isolates identified as species of Streptomyces were selected. Degradation of P(3HB) by these isolates was studied for a period of 8 days. The rate of degradation increased with increase in concentration of P(3HB) in the medium while it decreased with the supplementation of readily utili- zable carbon sources like glucose, fructose and sucrose. All four isolates also degraded the copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate [P(3HB–co–3HV)] in solid medium but to a lesser extent. However, the isolates were equally efficient in degrading P(3HB) in liquid medium.     

Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in soils.

The microbial degradation of tensile test pieces made of poly(3-hydroxybutyrate) [P(3HB)] or a copolymer of 90% 3-hydroxybutyric acid and 10% 3-hydroxyvaleric acid was studied in soils incubated at a constant temperature of 15, 28, or 40 degrees C for up to 200 days. In addition, hydrolytic degradation in sterile buffer at temperatures ranging from 4 to 55 degrees C was monitored for 98 days. Degradation was measured through loss of weight (surface erosion), molecular weight, and mechanical strength. While no weight loss was recorded in sterile buffer, samples incubated in soils were degraded at an erosion rate of 0.03 to 0.64% weight loss per day, depending on the polymer, the soil, and the incubation temperature. The erosion rate was enhanced by incubation at higher temperatures, and in most cases the copolymer lost weight at a higher rate than the homopolymer. The molecular weights of samples incubated at 40 degrees C in soils and those incubated at 40 degrees C in sterile buffer decreased at similar rates, while the molecular weights of samples incubated at lower temperatures remained almost unaffected, indicating that molecular weight decrease is due to simple hydrolysis and not to the action of biodegrading microorganisms. The degradation resulted in loss of mechanical properties. From the samples used in the biodegradation studies, 295 dominant microbial strains capable of degrading P (3HB) and the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer in vitro were isolated and identified.(ABSTRACT TRUNCATED AT 250 WORDS)     

New poly-(3-hydroxybutyrate)-based systems for controlled release of dipyridamole and indomethacin

New poly-(3-hydroxybutyrate)-based systems for controlled release of anti-inflammatory and antithrombogenic drugs have been studied. The release occurs via two mechanisms (diffusion and degradation) operating simultaneously. Dipyridamole and indomethacin diffusion processes determine the rate of the release at the early stages of the contact of the system with the environment (the first 6-8 days). The coefficient of the release diffusion of a drug depends on its nature, the thickness of the poly-(3-hydroxybutyrate) films containing the drug, the concentrations of dipyridamole and indomethacin, and the molecular weight of the poly-(3-hydroxybutyrate). The results obtained are critical for developing systems of release of diverse drugs, thus, enabling the attainment of the requisite physiological effects on tissues and organs of humans.