New type of pullulanase from Bacillus stearothermophilus and molecular cloning and expression of the gene in Bacillus subtilis.

A new type of pullulanase which mainly produced panose from pullulan was found in Bacillus stearothermophilus and purified. The enzyme can hydrolyze pullulan efficiently and only hydrolyzes a small amount of starch. When pullulan was used as a substrate, the main product was panose and small amounts of glucose and maltose were simultaneously produced. By using pTB522 as a vector plasmid, the enzyme gene was cloned and expressed in Bacillus subtilis. Since the enzyme from the recombinant plasmid carrier could convert pullulan into not only panose but also glucose and maltose, we concluded that these reactions were due to the single enzyme. The new pullulanase, with a molecular weight of 62,000, was fairly thermostable. The optimum temperature was 60 to 65 degrees C, and about 90% of the enzyme activity was retained even after treatment at 60 degrees C for 60 min. The optimum pH for the enzyme was 6.0.     

Three domains comprised in thermostable molecular weight 54,000 pullulanase of type I from Bacillus flavocaldarius KP1228

The gene that coded for a cellular pullulanase of type I (alpha-dextrin 6-glucanohydrolase, EC 3.2.1.41) in Bacillus flavocaldarius KP1228 (FERM-P9542) cells growing at 51 to 82 degrees C was expressed in Escherichia coli MV1184. The enzyme had a half-life of 10 min at 107 degrees C. Purification of the enzyme and its characterization showed that the enzyme was identical with the native one. Its primary structure of 475 residues with a molecular weight of 53,856 deduced from the gene was 15-21% and 43% identical to the corresponding C-terminal regions in the sequences of 2 plant and 6 bacterial pullulanases of type I, and of Bacillus stearothermophilus TRS40 neoplullulanase, respectively. Sequence analysis showed that B. flavocaldarius pullulanase comprised 3 domains, i.e., one catalytic (beta/alpha)8-barrel domain, one domain made of the region protruding from the barrel between the third beta-strand and the third alpha-helix, and one beta-stranded domain attached to the C-end of the barrel domain, but that the pullulanase lacked the beta-stranded domain commonly found in addition to the 3 domains in the neopullulanase and all other pullulanases, and attached to the N-end of the barrel domain.     

Production of Schardinger beta-dextrin by soluble and immobilized cyclodextrin glycosyltransferase of an alkalophilic Bacillus sp.

Succinylated cyclodextrin glycosyltransferase (EC 3.2.1.19) of an alkalophilic Bacillus sp. was adsorbed on a vinylpyridine copolymer. The enzyme had about 25% of the activity of soluble enzyme added. No increase of pH or thermal stability of the enzyme was observed by the adsorption, whereas optimum temperature for the enzyme action was shifted from 50 to 55 degrees C. The enzyme converted starch to cyclodextrine without significant loss of activity under the conditions of 4 times reusing of 6 hr conversion by the batch system or 2 weeks continuous reaction by the column system at 55 degrees C and pH 8.0. About 46% of the potato starch solution [15% (w/v)] was converted to cyclodextrins by the enzyme, and 52% was converted by the simultaneous action of the enzyme and alkaline pullulanase of alkalophilic Bacillus sp. (No. 202-1). These values were almost the same as those obtained by the soluble enzyme or enzymes system.     

Purification and characterization of a thermostable xylanase from Bacillus stearothermophilus T-6.

Bacillus stearothermophilus T-6 produces an extracellular xylanase that was shown to optimally bleach pulp at pH 9 and 65 degrees C. The enzyme was purified and concentrated in a single adsorption step onto a cation exchanger and is made of a single polypeptide with an apparent M(r) of 43,000 (determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis). Xylanase T-6 is an endoxylanase that completely degrades xylan to xylose and xylobiose. The pIs of the purified protein were 9 and 7 under native and denaturing conditions, respectively. The optimum activity was at pH 6.5; however, 60% of the activity was still retained at pH 10. At 65 degrees C and pH 7, the enzyme was stable for more than 10 h; at 65 degrees C and pH 9, the half-life of the enzyme was approximately 6 h. Kinetic experiments at 55 degrees C gave Vmax and Km values of 288 U/mg and 1.63 mg/ml, respectively. The enzyme had no apparent requirement for cofactors, and its activity was strongly inhibited by Zn2+, Cd2+, and Hg2+. Xylan completely protected the protein from inactivation by N-bromosuccinimide. The N-terminal sequence of the first 45 amino acids of the enzyme showed high homology with the N-terminal region of xylanase A from the alkalophilic Bacillus sp. strain C-125.     

A new thermoactive pullulanase from Desulfurococcus mucosus: cloning, sequencing, purification, and characterization of the recombinant enzyme after expression in Bacillus subtilis

The gene encoding a thermoactive pullulanase from the hyperthermophilic anaerobic archaeon Desulfurococcus mucosus (apuA) was cloned in Escherichia coli and sequenced. apuA from D. mucosus showed 45.4% pairwise amino acid identity with the pullulanase from Thermococcus aggregans and contained the four regions conserved among all amylolytic enzymes. apuA encodes a protein of 686 amino acids with a 28-residue signal peptide and has a predicted mass of 74 kDa after signal cleavage. The apuA gene was then expressed in Bacillus subtilis and secreted into the culture fluid. This is one of the first reports on the successful expression and purification of an archaeal amylopullulanase in a Bacillus strain. The purified recombinant enzyme (rapuDm) is composed of two subunits, each having an estimated molecular mass of 66 kDa. Optimal activity was measured at 85 degrees C within a broad pH range from 3.5 to 8.5, with an optimum at pH 5.0. Divalent cations have no influence on the stability or activity of the enzyme. RapuDm was stable at 80 degrees C for 4 h and exhibited a half-life of 50 min at 85 degrees C. By high-pressure liquid chromatography analysis it was observed that rapuDm hydrolyzed alpha-1,6 glycosidic linkages of pullulan, producing maltotriose, and also alpha-1,4 glycosidic linkages in starch, amylose, amylopectin, and cyclodextrins, with maltotriose and maltose as the main products. Since the thermoactive pullulanases known so far from Archaea are not active on cyclodextrins and are in fact inhibited by these cyclic oligosaccharides, the enzyme from D. mucosus should be considered an archaeal pullulanase type II with a wider substrate specificity.     

蜡样芽胞杆菌GXBC-3三个普鲁兰酶基因的表达及其酶学特性

探索获得优良的新型普鲁兰酶基因,丰富普鲁兰酶理论,对实现普鲁兰酶国产化具有重要意义。分析GenBank数据库中蜡样芽胞杆菌假定Ⅰ型、Ⅱ型普鲁兰酶基因序列,从实验室保藏的蜡样芽胞杆菌Bacilluscereus GXBC-3中克隆得到3个普鲁兰酶基因pulA、pulB、pulC,并分别导入大肠杆菌进行胞内诱导表达。纯化重组酶酶学性质研究表明重组酶PulA能水解α-l,6-和α-l,4-糖苷键,为Ⅱ型普鲁兰酶,以普鲁兰糖为底物时,最适反应温度及pH分别为40℃和6.5,比活力为32.89 U/mg;以可溶性淀粉为底物时,最适反应温度及pH分别为50℃和7.0,比活力为25.71 U/mg。重组酶PulB和PulC二者均只能水解α-l,6-糖苷键,为I型普鲁兰酶,以普鲁兰糖为底物时,其最适反应温度及pH分别为45℃、7.0和45℃、6.5,比活力分别为228.54 U/mg和229.65 U/mg。     

Purification and some properties of riboflavin synthetase from Bacillus stearothermophilus ATCC 8005.

A riboflavin synthetase was purified 51-fold from a thermophilic organism, Bacillus stearothermophilus ATCC 8005, that grew at 40 to 72 degrees C. Some of the properties of the enzyme are: (i) its temperature optimum was 95 degrees C, and the activity was negligible below 40 degrees C; (ii) the Arrhenius plot of the initial reaction rates was concave upward, with a break at 65 degrees C, and the apparent activation energies below and above 65 degrees C were 4.2 X 10(4) and 6.7 X 10(4) J/mol, respectively; (iii) the enzyme was fairly stable up to 60 degrees C without 6,7-dimethyl-8-ribityllumazine; this substance protected the enzyme from inactivation above 60 to 97 degrees C; (iv) the pH range for stability was 6.0 to 10.0 at 26 degrees C and 6.3 to 7.6 at 55 degrees C; (v) the enzyme was highly resistant at 26 degrees C to denaturation in 8 M urea, but the tolerance was extremely low at 55 degrees C; (vi) its molecular weight was estimated at 45,000; (vii) the Km for 6,7-dimethyl-8-ribityllumazine was 23 micrometer at 55 degrees C and 29 micrometer at 75 degrees C; (viii) its pH optimum was 6.7 to 7.2; (ix) 6-methyl-7-hydroxy-8-ribityllumazine was a competitive inhibitor (Ki = 0.18 micrometer); (x) the activity was sensitive to heavy-metal ions and thiol reagents; (xi) the enzyme did not require cofactor or a carbon donor; and (xii) the molar ratio of 6,7-dimethyl-8-ribityllumazine consumption to riboflavin formation was 2 throughout the entire reaction. Properties i through vi distinguish this enzyme from riboflavin synthetases purified by other investigators from mesophilic organisms, Ashbya gossypii, Eremothecium ashbyii, Escherichia coli, yeast, and spinach.     

Purification and some properties of riboflavin synthetase from Bacillus stearothermophilus ATCC 8005.

A riboflavin synthetase was purified 51-fold from a thermophilic organism, Bacillus stearothermophilus ATCC 8005, that grew at 40 to 72 degrees C. Some of the properties of the enzyme are: (i) its temperature optimum was 95 degrees C, and the activity was negligible below 40 degrees C; (ii) the Arrhenius plot of the initial reaction rates was concave upward, with a break at 65 degrees C, and the apparent activation energies below and above 65 degrees C were 4.2 X 10(4) and 6.7 X 10(4) J/mol, respectively; (iii) the enzyme was fairly stable up to 60 degrees C without 6,7-dimethyl-8-ribityllumazine; this substance protected the enzyme from inactivation above 60 to 97 degrees C; (iv) the pH range for stability was 6.0 to 10.0 at 26 degrees C and 6.3 to 7.6 at 55 degrees C; (v) the enzyme was highly resistant at 26 degrees C to denaturation in 8 M urea, but the tolerance was extremely low at 55 degrees C; (vi) its molecular weight was estimated at 45,000; (vii) the Km for 6,7-dimethyl-8-ribityllumazine was 23 micrometer at 55 degrees C and 29 micrometer at 75 degrees C; (viii) its pH optimum was 6.7 to 7.2; (ix) 6-methyl-7-hydroxy-8-ribityllumazine was a competitive inhibitor (Ki = 0.18 micrometer); (x) the activity was sensitive to heavy-metal ions and thiol reagents; (xi) the enzyme did not require cofactor or a carbon donor; and (xii) the molar ratio of 6,7-dimethyl-8-ribityllumazine consumption to riboflavin formation was 2 throughout the entire reaction. Properties i through vi distinguish this enzyme from riboflavin synthetases purified by other investigators from mesophilic organisms, Ashbya gossypii, Eremothecium ashbyii, Escherichia coli, yeast, and spinach.     

Production and partial characterization of dehairing protease from Bacillus cereus MCM B-326

Bacillus cereus MCM B-326, isolated from buffalo hide, produced an extracellular protease. Maximum protease production occurred (126.87+/-1.32 U ml(-1)) in starch soybean meal medium of pH 9.0, at 30 degrees C, under shake culture condition, with 2.8 x 10(8) cells ml(-1) as initial inoculum density, at 36 h. Ammonium sulphate precipitate of the enzyme was stable over a temperature range of 25-65 degrees C and pH 6-12, with maximum activity at 55 degrees C and pH 9.0. The enzyme required Ca(2+) ions for its production but not for activity and/or stability. The partially purified enzyme exhibited multiple proteases of molecular weight 45 kDa and 36 kDa. The enzyme could be effectively used to remove hair from buffalo hide indicating its potential in leather processing industry.     

Isolation and characteristics of thermostable pullulanase from Clostridium thermohydrosulfuricum produced by Escherichia coli cells

The expressed gene (pul) for a thermostable pullulanase from Clostridium thermohydrosulfuricum was cloned into Escherichia coli. The enzyme was purified from cell extracts of E. coli by thermoinactivation, ammonium sulphate precipitation and gel exclusion. The purified enzyme was characterized as monomer with both pullulanase and glucoamylase activities. The general physico-chemical and catalytic properties of this enzyme were obtained. In particular, pullulanase and glucoamylase activities were stable and optimally active at 65 degrees C. The pH optimum for activity was 5.8. The amino acid composition and amino acid sequence of N-terminal end were estimated.     

Characteristics of thermostable pullulanase from Bacillus stearothermophilus and the nucleotide sequence of the gene

Thermostable pullulanase was purified to homogeneity on sodium dodecyl sulfate-polyacrylamide gel from the culture supernatant of Bacillus stearothermophilus TRS128. However, multiformity of the pullulanase was suggested by activity staining on a pullulan-reactive red plate. The thermostability of the enzyme was tested. In the presence of Ca²⁺, the optimum temperature of the pullulanase was 75°C, and nearly 100% of the enzyme activity was retained even after treatment at 68°C for 60 min. Since the thermostable pullulanase gene (pulT) has been cloned, the nucleotide sequence was determined. Although the DNA sequence revealed only one large open reading frame, two possible pairs of SD sequence and initiation codon were found in the frame. To analyze the regulatory region, several mutations (deletion, insertion and substitution of nucleotides) were introduced in the flanking region of pulT, using site-directed mutagenesis. A putative promoter, SD sequence and initiation codon were inferred. The pulT gene was composed of 1974 bases and 658 amino acid residues (molecular weight 75,375). The deduced amino acid sequence of the thermostable pullulanase exhibited a fairly low homology with that of the thermolabile pullulanase from Klebsiella aerogenes. However, four consensus sequences containing catalytic and/or substrate binding sites for amylolytic enzymes were also found in the thermostable pullulanase and the thermolabile enzyme.     

嗜热枯草芽孢杆菌普鲁兰酶基因的表达与重组酶的性质

克隆嗜热枯草芽孢杆菌WY-34普鲁兰酶基因并在大肠杆菌中进行表达,对重组酶进行纯化和酶学性质研究,根据枯草芽孢杆菌的普鲁兰酶蛋白序列,设计PCR引物对WY-34的普鲁兰酶基因进行克隆及异源表达.对表达蛋白的最适pH、pH稳定性及最适温度、温度稳定性等特性进行研究,并测定重组普鲁兰酶的底物特异性.将普鲁兰酶基因pluA克隆及分析序列后,发现基因长度为2.2 kb,编码718个氨基酸,在大肠杆菌中异源表达.通过Ni-IDA亲和层析一步纯化得到比活力为93.2 U/mg的纯酶,SDS-PAGE和凝胶层析测定的分子量分别为76.2 kD和74.3 kD.酶学性质研究表明,该酶的最适温度为40℃,在温度不高于45℃条件下稳定;最适pH为6.0,同一温度下pH 6.0-9.0范围内处理30 min可以保持80％以上的酶活力,此酶对普鲁兰糖有很强的底物特异性.此重组普鲁兰酶的酶学性质表明此酶具有一定的工业化应用价值.     

Some catalytic and molecular properties of threonine deaminase from Bacillus stearothermophilus.

Threonine deaminase [EC 4.2.1.16] was highly purified from Bacillus stearothermophilus. The enzyme exhibited maximum activity at 65 degrees and at pH 9.2--9.6. It was inactivated on dilution and on storage at 4 degrees, but was protected by egg albumin. The enzyme was labile at 65 degrees, but became stable in the presence of egg albumin and isoleucine at pH 7.0. The substrate saturation curve for the enzyme reaction at 40 or 65 degrees was hyperbolic, but in the presence of isoleucine, the curve became sigmoidal (n = 2). The enzyme was more sensitive to isoleucine at 40 degrees than at 65 degrees, while valine slightly inhibited the enzyme at both 40 and 65 degrees. Inhibition of the enzyme by isoleucine was antagonized by valine at 40 and 65 degrees. These properties were essentially similar to those of the enzymes from mesophilic and thermophilic bacteria. The enzyme existed in two forms with different molecular sizes, 1.5-5 X 10(6) and 2 X 10(5) daltons, at pH 7.0 and at temperatures below 40 degrees. The larger component disaggregated into the small one at pH 8.5 or above, at temperatures above 50 degrees or in the presence of isoleucine and valine.     

地衣芽孢杆菌普鲁兰酶编码基因的鉴定

对地衣芽孢杆菌基因组序列分析显示。其中标注为amyX的基因可能编码普鲁兰酶。以PCR方法,从地衣芽孢杆菌染色体DNA中扩增出amyX基因蛋白编码区,插入大肠杆菌表达载体pET28aT7启动予下游。含重组质粒的大肠杆菌BL21（DE3）在IPTG诱导下表达出有活性的普鲁兰酶。酶学性质初步分析表明,重组普鲁兰酶最适反应温度为40℃,最适pH值为6．0。     

Effect of ADP on ATPASE from a strain of Bacillus stearothermophilus.

Bacillus stearothermophilus ATCC 12016 was unable to grow at temperatures below 40 degrees C. On incubating the bacteria at the temperatures, ATP in cells disappeared, ADP was accumulated and ATPase (EC 3.6.1.3) was inactivated. When the purified ATPase was incubated at the temperatures for 1 h with 0.17 mM ADP in the presence of MgCl2, the enzyme was completely inactivated. The inactivated enzyme was reactivated on dilution or dialysis or on warming at 65 degrees C. During the incubation of the enzyme sample, the absorbance spectrum of the enzyme changed. On further incubating the sample over 1.5 h, the second step of spectral change occurred together with the change of the circular dichrosim and the dissociation into a lower molecular weight species of the protein. When the enzyme was treated with ADP-MgCl2 at 65 degrees C, the inactivation and conformational change of the enzyme was not observed.     

Purification and characterization of DNA polymerases from Bacillus species.

DNA polymerases from Bacillus stearothermophilus, Bacillus caldotenax, and Bacillus caldovelox were purified by chromatography on DEAE-cellulose, phosphocellulose, and heparin-Sepharose and obtained in high yield. The enzyme preparations are free of exo- and endonuclease activities. Additional purification steps, e.g., hydrophobic interaction chromatography and chromatography on a Mono Q column or sucrose density gradient centrifugation, are needed to obtain the enzymes in the form of homogeneous 95-kDa proteins. Each of the three organisms possesses a major DNA polymerase activity comparable to DNA polymerase I. The enzymes require Mg2+ (10 to 30 mM) for optimal activity, although 0.4 mM Mn2+ could substitute for magnesium. The optimal reaction temperatures were lowest in B. stearothermophilus (60 to 65 degrees C) and about equal in B. caldovelox and B. caldotenax (65 to 70 degrees C). The thermal stabilities of the enzymes increased in the same order. The DNA polymerase from Thermus thermophilus was isolated for comparison by using a similar procedure. The enzyme was obtained as a homogeneous 85-kDa protein that was also free of exo- and endonucleolytic activities.     

Induction of pullulanase production in Bacillus cereus FDTA-13

Studies were carried out on the production of pullulanase by a newly isolated strain Bacillus cereus FDTA-13. High titres of the enzyme were obtained in a medium containing branched polysaccharides. To further enhance the yield, induction of pullulanase using conventional inducers were studied. Maltooligosaccharides (maltose to maltotetraose) when added in the medium individually, or in a 1:1 combination of maltotriose and maltotetraose resulted different levels of pullulanase compared to control. Growth under carbon limited conditions (5 g l(-1)) with inducers resulted remarkably enhanced pullulanase activity. Pullulanase activity was severely repressed in presence of glucose. Low levels of pullulanase was observed in nitrogen limited medium, even with combinations of several maltosaccharides.     

Molecular cloning and characterization of the beta-amylase gene from Bacillus circulans

A gene encoding the beta-amylase of Bacillus circulans was isolated from a lambda library and sequenced. The structural gene consists of a 1725 bp open reading frame encoding a polypeptide with a predicted molecular wt of 62830 Daltons. Two active forms of the enzyme were found when the gene was expressed in E. coli. The larger 60 kD form was approximately 3 kD larger than the mature beta-amylase secreted from B. circulans, suggesting that processing of this protein is different between the two species. The smaller 49 kD form is also present at a low level in B. circulans and may result from proteolytic cleavage. The enzyme has a temperature optimum of 50 degrees C. Two other genes, one encoding an alpha-amylase and one a pullulanase, were also isolated from the lambda library.     

Fluorescent labelling of 6-phosphogluconate dehydrogenase from Bacillus stearothermophilus.

The thermophilic 6-phosphogluconate dehydrogenase from Bacillus stearothermophilus was inhibited upon specific modification of the -SH group of cysteine residues by 7-chloro-4-nitrobenzo-2-oxa-1, 3-diazole (NBD-Cl) at pH 7.0. By using 20-100-fold molar excess of NBD-CL the reaction occurs slowly at pH 7.0 as a first order process. Partial protection from inactivation was observed when the substrate 6-phosphogluconate or the coenzyme NADP was added to the reaction mixture. Complete inactivation was achieved upon modification of 1.9 of the six cysteine residues per mole of enzyme, which corresponds to nearly one residue per enzyme subunit. Circular dichroism measurements suggest that the gross structure of the protein molecule is practically unchanged upon reaction of the enzyme with NBD-Cl. Melting profile experiments revealed a single transition occurring at about 65 degrees C. Analogously, the profile of intensity of the fluorescence emission at 520 nm of the enzyme-bound S-NBD groups versus temperature indicated a midpoint of transition near 65 degrees C. Since this melting temperature corresponds closely to that observed with the native enzyme, these results would indicate that the molecular organizations of the native and modified enzyme are similar and stabilized by similar interactions within the polypeptide chain.     

Purification and characterization of thermostable pectate lyase with protopectinase activity from thermophilic Bacillus sp. TS 47

A strain of thermophilic bacterium, Bacillus sp., with pectolytic activity has been isolated. It produced an extracellular endo-polygalacturonate trans-eliminase (PL, EC 4.2.2.1) when grown at 60 degrees C on a medium containing polygalacturonate (PGA). The PL was purified by hydrophobic, cation exchange, and size exclusion column chromatographies. The molecular mass of the enzyme was 50 kDa by SDS-PAGE. The isoelectric point of the enzyme was pH 5.3. The enzyme had a half-life of 13 and 1 h at 65 and 70 degrees C, respectively, and showed optimal activity around at 70 degrees C and pH 8.0. It had protopectinase activity, besides PL activity, on lemon protopectin and cotton fibers. The first 20 amino acids sequence of the enzyme had significant similarity with that of PL from methophilic Bacillus subtilis, with 50% identity.