Evolutionary Trace Annotation of Protein Function in the Structural Proteome

By design, structural genomics (SG) solves many structures that cannot be assigned function based on homology to known proteins. Alternative function annotation methods are therefore needed and this study focuses on function prediction with three-dimensional (3D) templates: small structural motifs built of just a few functionally critical residues. Although experimentally proven functional residues are scarce, we show here that Evolutionary Trace (ET) rankings of residue importance are sufficient to build 3D templates, match them, and then assign Gene Ontology (GO) functions in enzymes and non-enzymes alike. In a high-specificity mode, this Evolutionary Trace Annotation (ETA) method covered half (53%) of the 2384 annotated SG protein controls. Three-quarters (76%) of predictions were both correct and complete. The positive predictive value for all GO depths (all-depth PPV) was 84%, and it rose to 94% over GO depths 1-3 (depth 3 PPV). In a high-sensitivity mode, coverage rose significantly (84%), while accuracy fell moderately: 68% of predictions were both correct and complete, all-depth PPV was 75%, and depth 3 PPV was 86%. These data concur with prior mutational experiments showing that ET rank information identifies key functional determinants in proteins. In practice, ETA predicted functions in 42% of 3461 unannotated SG proteins. In 529 cases—including 280 non-enzymes and 21 for metal ion ligands—the expected accuracy is 84% at any GO depth and 94% down to GO depth 3, while for the remaining 931 the expected accuracies are 60% and 71%, respectively. Thus, local structural comparisons of evolutionarily important residues can help decipher protein functions to known reliability levels and without prior assumption on functional mechanisms. ETA is available at http://mammoth.bcm.tmc.edu/eta.     

Resolving protein structure‐function‐binding site relationships from a binding site similarity network perspective

Functional annotation is seldom straightforward with complexities arising due to functional divergence in protein families or functional convergence between non‐homologous protein families, leading to mis‐annotations. An enzyme may contain multiple domains and not all domains may be involved in a given function, adding to the complexity in function annotation. To address this, we use binding site information from bound cognate ligands and catalytic residues, since it can help in resolving fold‐function relationships at a finer level and with higher confidence. A comprehensive database of 2,020 fold‐function‐binding site relationships has been systematically generated. A network‐based approach is employed to capture the complexity in these relationships, from which different types of associations are deciphered, that identify versatile protein folds performing diverse functions, same function associated with multiple folds and one‐to‐one relationships. Binding site similarity networks integrated with fold, function, and ligand similarity information are generated to understand the depth of these relationships. Apart from the observed continuity in the functional site space, network properties of these revealed versatile families with topologically different or dissimilar binding sites and structural families that perform very similar functions. As a case study, subtle changes in the active site of a set of evolutionarily related superfamilies are studied using these networks. Tracing of such similarities in evolutionarily related proteins provide clues into the transition and evolution of protein functions. Insights from this study will be helpful in accurate and reliable functional annotations of uncharacterized proteins, poly‐pharmacology, and designing enzymes with new functional capabilities. Proteins 2017; 85:1319–1335. © 2017 Wiley Periodicals, Inc.     

Novel search method for the discovery of functional relationships

MOTIVATION: Numerous annotations are available that functionally characterize genes and proteins with regard to molecular process, cellular localization, tissue expression, protein domain composition, protein interaction, disease association and other properties. Searching this steadily growing amount of information can lead to the discovery of new biological relationships between genes and proteins. To facilitate the searches, methods are required that measure the annotation similarity of genes and proteins. However, most current similarity methods are focused only on annotations from the Gene Ontology (GO) and do not take other annotation sources into account. RESULTS: We introduce the new method BioSim that incorporates multiple sources of annotations to quantify the functional similarity of genes and proteins. We compared the performance of our method with four other well-known methods adapted to use multiple annotation sources. We evaluated the methods by searching for known functional relationships using annotations based only on GO or on our large data warehouse BioMyn. This warehouse integrates many diverse annotation sources of human genes and proteins. We observed that the search performance improved substantially for almost all methods when multiple annotation sources were included. In particular, our method outperformed the other methods in terms of recall and average precision.     

De-orphaning the structural proteome through reciprocal comparison of evolutionarily important structural features

Function prediction frequently relies on comparing genes or gene products to search for relevant similarities. Because the number of protein structures with unknown function is mushrooming, however, we asked here whether such comparisons could be improved by focusing narrowly on the key functional features of protein structures, as defined by the Evolutionary Trace (ET). Therefore a series of algorithms was built to (a) extract local motifs (3D templates) from protein structures based on ET ranking of residue importance; (b) to assess their geometric and evolutionary similarity to other structures; and (c) to transfer enzyme annotation whenever a plurality was reached across matches. Whereas a prototype had only been 80% accurate and was not scalable, here a speedy new matching algorithm enabled large-scale searches for reciprocal matches and thus raised annotation specificity to 100% in both positive and negative controls of 49 enzymes and 50 non-enzymes, respectively-in one case even identifying an annotation error-while maintaining sensitivity ( approximately 60%). Critically, this Evolutionary Trace Annotation (ETA) pipeline requires no prior knowledge of functional mechanisms. It could thus be applied in a large-scale retrospective study of 1218 structural genomics enzymes and reached 92% accuracy. Likewise, it was applied to all 2935 unannotated structural genomics proteins and predicted enzymatic functions in 320 cases: 258 on first pass and 62 more on second pass. Controls and initial analyses suggest that these predictions are reliable. Thus the large-scale evolutionary integration of sequence-structure-function data, here through reciprocal identification of local, functionally important structural features, may contribute significantly to de-orphaning the structural proteome.     

Sequence and structure continuity of evolutionary importance improves protein functional site discovery and annotation

Protein functional sites control most biological processes and are important targets for drug design and protein engineering. To characterize them, the evolutionary trace (ET) ranks the relative importance of residues according to their evolutionary variations. Generally, top‐ranked residues cluster spatially to define evolutionary hotspots that predict functional sites in structures. Here, various functions that measure the physical continuity of ET ranks among neighboring residues in the structure, or in the sequence, are shown to inform sequence selection and to improve functional site resolution. This is shown first, in 110 proteins, for which the overlap between top‐ranked residues and actual functional sites rose by 8% in significance. Then, on a structural proteomic scale, optimized ET led to better 3D structure‐function motifs (3D templates) and, in turn, to enzyme function prediction by the Evolutionary Trace Annotation (ETA) method with better sensitivity of (40% to 53%) and positive predictive value (93% to 94%). This suggests that the similarity of evolutionary importance among neighboring residues in the sequence and in the structure is a universal feature of protein evolution. In practice, this yields a tool for optimizing sequence selections for comparative analysis and, via ET, for better predictions of functional site and function. This should prove useful for the efficient mutational redesign of protein function and for pharmaceutical targeting.     

Protein molecular function prediction by Bayesian phylogenomics

We present a statistical graphical model to infer specific molecular function for unannotated protein sequences using homology. Based on phylogenomic principles, SIFTER (Statistical Inference of Function Through Evolutionary Relationships) accurately predicts molecular function for members of a protein family given a reconciled phylogeny and available function annotations, even when the data are sparse or noisy. Our method produced specific and consistent molecular function predictions across 100 Pfam families in comparison to the Gene Ontology annotation database, BLAST, GOtcha, and Orthostrapper. We performed a more detailed exploration of functional predictions on the adenosine-5′-monophosphate/adenosine deaminase family and the lactate/malate dehydrogenase family, in the former case comparing the predictions against a gold standard set of published functional characterizations. Given function annotations for 3% of the proteins in the deaminase family, SIFTER achieves 96% accuracy in predicting molecular function for experimentally characterized proteins as reported in the literature. The accuracy of SIFTER on this dataset is a significant improvement over other currently available methods such as BLAST (75%), GeneQuiz (64%), GOtcha (89%), and Orthostrapper (11%). We also experimentally characterized the adenosine deaminase from Plasmodium falciparum, confirming SIFTER's prediction. The results illustrate the predictive power of exploiting a statistical model of function evolution in phylogenomic problems. A software implementation of SIFTER is available from the authors.     

Functional modelling of an equine bronchoalveolar lavage fluid proteome provides experimental confirmation and functional annotation of equine genome sequences

The equine genome sequence enables the use of high-throughput genomic technologies in equine research, but accurate identification of expressed gene products and interpreting their biological relevance require additional structural and functional genome annotation. Here, we employ the equine genome sequence to identify predicted and known proteins using proteomics and model these proteins into biological pathways, identifying 582 proteins in normal cell-free equine bronchoalveolar lavage fluid (BALF). We improved structural and functional annotation by directly confirming the in vivo expression of 558 (96%) proteins, which were computationally predicted previously, and adding Gene Ontology (GO) annotations for 174 proteins, 108 of which lacked functional annotation. Bronchoalveolar lavage is commonly used to investigate equine respiratory disease, leading us to model the associated proteome and its biological functions. Modelling of protein functions using Ingenuity Pathway Analysis identified carbohydrate metabolism, cell-to-cell signalling, cellular function, inflammatory response, organ morphology, lipid metabolism and cellular movement as key biological processes in normal equine BALF. Comparative modelling of protein functions in normal cell-free bronchoalveolar lavage proteomes from horse, human, and mouse, performed by grouping GO terms sharing common ancestor terms, confirms conservation of functions across species. Ninety-one of 92 human GO categories and 105 of 109 mouse GO categories were conserved in the horse. Our approach confirms the utility of the equine genome sequence to characterize protein networks without antibodies or mRNA quantification, highlights the need for continued structural and functional annotation of the equine genome and provides a framework for equine researchers to aid in the annotation effort.     

Piecing together the structure-function puzzle: experiences in structure-based functional annotation of hypothetical proteins

The combination of genomic sequencing with structural genomics has provided a wealth of new structures for previously uncharacterized ORFs, more commonly referred to as hypothetical proteins. This rapid growth has been the direct result of high-throughput, automated approaches in both the identification of new ORFs and the determination of high-resolution 3-D protein structures. A significant bottleneck is reached, however, at the stage of functional annotation in that the assignment of function is not readily automatable. It is often the case that the initial structural analysis at best indicates a functional family for a given hypothetical protein, but further identification of a relevant ligand or substrate is impeded by the diversity of function in a particular structural classification of proteins family, a highly selective and specific ligand-binding site, or the identification of a novel protein fold. Our approach to the functional annotation of hypothetical proteins relies on the combination of structural information with additional bioinformatics evidence garnered from operon prediction, loose functional information of additional operon members, conservation of catalytic residues, as well as cocrystallization trials and virtual ligand screening. The synthesis of all available information for each protein has permitted the functional annotation of several hypothetical proteins from Escherichia coli and each assignment has been confirmed through generally accepted biochemical methods.     

The Drosophila melanogaster sperm proteome-II (DmSP-II)

Advances in mass spectrometry technology, high-throughput proteomics and genome annotations have resulted in significant increases in our molecular understanding of sperm composition. Using improved separation and detection methods and an updated genome annotation, a re-analysis of the Drosophila melanogaster sperm proteome (DmSP) has resulted in the identification of 956 sperm proteins. Comparative analysis with our previous proteomic dataset revealed 766 new proteins and an updated sperm proteome containing a total of 1108 proteins, termed the DmSP-II. This expanded dataset includes additional proteins with predicted sperm functions and confirms previous findings concerning the genomic organization of sperm loci. Bioinformatic and protein network analyses demonstrated high quality and reproducibility of proteome coverage across three replicate mass spectrometry runs. The use of whole-cell proteomics in conjunction with characterized phenotypes, functional annotations and pathway information has advanced our systems level understanding of sperm proteome functional networks.     

Automatic annotation of protein function

The annotation of protein function at genomic scale is essential for day-to-day work in biology and for any systematic approach to the modeling of biological systems. Currently, functional annotation is essentially based on the expansion of the relatively small number of experimentally determined functions to large collections of proteins. The task of systematic annotation faces formidable practical problems related to the accuracy of the input experimental information, the reliability of current systems for transferring information between related sequences, and the reproducibility of the links between database information and the original experiments reported in publications. These technical difficulties merely lie on the surface of the deeper problem of the evolution of protein function in the context of protein sequences and structures. Given the mixture of technical and scientific challenges, it is not surprising that errors are introduced, and expanded, in database annotations. In this situation, a more realistic option is the development of a reliability index for database annotations, instead of depending exclusively on efforts to correct databases. Several groups have attempted to compare the database annotations of similar proteins, which constitutes the first steps toward the calibration of the relationship between sequence and annotation space.     

Mining GO Annotations for Improving Annotation Consistency

Despite the structure and objectivity provided by the Gene Ontology (GO), the annotation of proteins is a complex task that is subject to errors and inconsistencies. Electronically inferred annotations in particular are widely considered unreliable. However, given that manual curation of all GO annotations is unfeasible, it is imperative to improve the quality of electronically inferred annotations. In this work, we analyze the full GO molecular function annotation of UniProtKB proteins, and discuss some of the issues that affect their quality, focusing particularly on the lack of annotation consistency. Based on our analysis, we estimate that 64% of the UniProtKB proteins are incompletely annotated, and that inconsistent annotations affect 83% of the protein functions and at least 23% of the proteins. Additionally, we present and evaluate a data mining algorithm, based on the association rule learning methodology, for identifying implicit relationships between molecular function terms. The goal of this algorithm is to assist GO curators in updating GO and correcting and preventing inconsistent annotations. Our algorithm predicted 501 relationships with an estimated precision of 94%, whereas the basic association rule learning methodology predicted 12,352 relationships with a precision below 9%.     

Enhanced function annotations for Drosophila serine proteases: a case study for systematic annotation of multi-member gene families

Systematically annotating function of enzymes that belong to large protein families encoded in a single eukaryotic genome is a very challenging task. We carried out such an exercise to annotate function for serine-protease family of the trypsin fold in Drosophila melanogaster, with an emphasis on annotating serine-protease homologues (SPHs) that may have lost their catalytic function. Our approach involves data mining and data integration to provide function annotations for 190 Drosophila gene products containing serine-protease-like domains, of which 35 are SPHs. This was accomplished by analysis of structure-function relationships, gene-expression profiles, large-scale protein-protein interaction data, literature mining and bioinformatic tools. We introduce functional residue clustering (FRC), a method that performs hierarchical clustering of sequences using properties of functionally important residues and utilizes correlation co-efficient as a quantitative similarity measure to transfer in vivo substrate specificities to proteases. We show that the efficiency of transfer of substrate-specificity information using this method is generally high. FRC was also applied on Drosophila proteases to assign putative competitive inhibitor relationships (CIRs). Microarray gene-expression data were utilized to uncover a large-scale and dual involvement of proteases in development and in immune response. We found specific recruitment of SPHs and proteases with CLIP domains in immune response, suggesting evolution of a new function for SPHs. We also suggest existence of separate downstream protease cascades for immune response against bacterial/fungal infections and parasite/parasitoid infections. We verify quality of our annotations using information from RNAi screens and other evidence types. Utilization of such multi-fold approaches results in 10-fold increase of function annotation for Drosophila serine proteases and demonstrates value in increasing annotations in multiple genomes.     

PRINTR: Prediction of RNA binding sites in proteins using SVM and profiles

Protein–RNA interactions play a key role in a number of biological processes such as protein synthesis, mRNA processing, assembly and function of ribosomes and eukaryotic spliceosomes. A reliable identification of RNA-binding sites in RNA-binding proteins is important for functional annotation and site-directed mutagenesis. We developed a novel method for the prediction of protein residues that interact with RNA using support vector machine (SVM) and position-specific scoring matrices (PSSMs). Two cases have been considered in the prediction of protein residues at RNA-binding surfaces. One is given the sequence information of a protein chain that is known to interact with RNA; the other is given the structural information. Thus, five different inputs have been tested. Coupled with PSI-BLAST profiles and predicted secondary structure, the present approach yields a Matthews correlation coefficient (MCC) of 0.432 by a 7-fold cross-validation, which is the best among all previous reported RNA-binding sites prediction methods. When given the structural information, we have obtained the MCC value of 0.457, with PSSMs, observed secondary structure and solvent accessibility information assigned by DSSP as input. A web server implementing the prediction method is available at the following URL: .     

Statistically rigorous automated protein annotation

MOTIVATION: Assignment of putative protein functional annotation by comparative analysis using pre-defined experimental annotations is performed routinely by molecular biologists. The number and statistical significance of these assignments remains a challenge in this era of high-throughput proteomics. A combined statistical method that enables robust, automated protein annotation by reliably expanding existing annotation sets is described. An existing clustering scheme, based on relevant experimental information (e.g. sequence identity, keywords or gene expression data) is required. The method assigns new proteins to these clusters with a measure of reliability. It can also provide human reviewers with a reliability score for both new and previously classified proteins. RESULTS: A dataset of 27 000 annotated Protein Data Bank (PDB) polypeptide chains (of 36 000 chains currently in the PDB) was generated from 23 000 chains classified a priori. AVAILABILITY: PDB annotations and sample software implementation are freely accessible on the Web at http://pmr.sdsc.edu/go     

On the characterization of energy networks of proteins

The construction of a realistic theoretical model of proteins is determinant for improving the computational simulations of their structural and functional aspects. Modeling proteins as a network of non-covalent connections between the atoms of amino acid residues has shown valuable insights into these macromolecules. The energy-related properties of protein structures are known to be very important in molecular dynamics. However, these same properties have been neglected when the protein structures are modeled as networks of atoms and amino acid residues. A new approach for the construction of protein models based on a network of atoms is presented. This method, based on interatomic interaction, takes into account the energy and geometric aspects of the protein structures that were not employed before, such as atomic occlusion inside the protein, the use of solvation, protein modeling and analysis, and the use of energy potentials to estimate the energies of interatomic non-covalent contacts. As a result, we achieved a more realistic network model of proteins. This model has the virtue of being more robust in face of different unknown variables that usually are arbitrarily estimated. We were able to determine the most connected residues of all the proteins studied, so that we are now in a better condition to study their structural role.     

Comparison of topological clustering within protein networks using edge metrics that evaluate full sequence,full structure,and active site microenvironment similarity

The development of accurate protein function annotation methods has emerged as a major unsolved biological problem. Protein similarity networks, one approach to function annotation via annotation transfer, group proteins into similarity-based clusters. An underlying assumption is that the edge metric used to identify such clusters correlates with functional information. In this contribution, this assumption is evaluated by observing topologies in similarity networks using three different edge metrics: sequence (BLAST), structure (TM-Align), and active site similarity (active site profiling, implemented in DASP). Network topologies for four well-studied protein superfamilies (enolase, peroxiredoxin (Prx), glutathione transferase (GST), and crotonase) were compared with curated functional hierarchies and structure. As expected, network topology differs, depending on edge metric; comparison of topologies provides valuable information on structure/function relationships. Subnetworks based on active site similarity correlate with known functional hierarchies at a single edge threshold more often than sequence- or structure-based networks. Sequence- and structure-based networks are useful for identifying sequence and domain similarities and differences; therefore, it is important to consider the clustering goal before deciding appropriate edge metric. Further, conserved active site residues identified in enolase and GST active site subnetworks correspond with published functionally important residues. Extension of this analysis yields predictions of functionally determinant residues for GST subgroups. These results support the hypothesis that active site similarity-based networks reveal clusters that share functional details and lay the foundation for capturing functionally relevant hierarchies using an approach that is both automatable and can deliver greater precision in function annotation than current similarity-based methods.