Leaf and flower formation in shoot tips of mangrove trees in Pernambuco, Brazil

Leaves are major components of mangrove productivity, but data on leaf dynamics are scarce. We marked the shoot tips of three species in four sites of a riverine mangrove and monitored leaf formation, senescence and abscission and flower formation. The leaf area and biomass in the mangrove were estimated using phytosociological data. Leaf size and formation were similar among the four sites. The tips of Rhizophora mangle had more leaf scars (41), more leaves present (9.7), a faster leaf formation rate (one every 26 days) and a shorter life span (8.4 months) than those of Avicennia schaueriana (10, 8.1, 48 days and 13.1 months, respectively) and Laguncularia racemosa, except for the shorter life span (15, 6.6, 31 days and 6.8 months, respectively). The proportion of tips that flowered was higher in L. racemosa (13 %) and in R. mangle (11 %) than in A. schaueriana (2 %). The largest biomass of the average R. mangle leaf (0.75 vs. 0.53 and 0.37 g leaf^?1, of L. racemosa and A. schaueriana, respectively) and the highest plant density of this species (2,590 vs. 694 and 202 plant ha^?1, respectively) resulted in it having the greatest leaf productivity (10.6 Mg ha^?1 year^?1 compared to 2.4 Mg ha^?1 year^?1 for L. racemosa and 0.3 Mg ha^?1 year^?1 for A. schaueriana). The total leaf production is higher in this mangrove than most of those reported for other mangroves in the world.     

Productivity and biochemical composition of <Emphasis Type="Italic">Tetradesmus obliquus</Emphasis> and <Emphasis Type="Italic">Phaeodactylum tricornutum</Emphasis>: effects of different cultivation approaches

The present work evaluated biomass productivity, carbon dioxide fixation rate, and biochemical composition of two microalgal species, Phaeodactylum tricornutum (Bacillariophyta) and Tetradesmus obliquus (Chlorophyta), cultivated indoors in high-technology photobioreactors (HT-PBR) and outdoors both in pilot ponds and low-technology photobioreactors in a greenhouse in southern Italy. Microalgae were grown in standard media, under nitrogen starvation, and in two liquid digestates obtained from anaerobic digestion of agro-zootechnical and vegetable biomass. P. tricornutum, cultivated in semi-continuous mode in indoor HT-PBRs with standard medium, showed a biomass productivity of 21.0?±?2.3 g m^?2 d^?1. Applying nitrogen starvation, the lipid productivity increased from 2.3 up to 4.5?±?0.5 g m^?2 d^?1, with a 24 % decrease of biomass productivity. For T. obliquus, a biomass productivity of 9.1?±?0.9 g m^?2 d^?1 in indoor HT-PBR was obtained using standard medium. Applying liquid digestates as fertilizers in open ponds, T. obliquus gave a biomass productivity (10.8?±?2.0 g m^?2 d^?1) not statistically different from complete medium such as P. tricornutum (6.5?±?2.2 g m^?2 d^?1). The biochemical data showed that the fatty acid composition of the microalgal biomass was affected by the different cultivation conditions for both microalgae. In conclusion, it was found that the microalgal productivity in standard medium was about doubled in HT-PBR compared to open ponds for P. tricornutum and was about 20 % higher for T. obliquus.     

Stem, branch and leaf biomass-density relationships in forest communities

Defining and quantifying biomass?Cdensity relationships in dense plant stands has been a long-standing issue in both theoretical and empirical studies. Most existing/traditional studies focus on whole plant individuals, without considering different plant components (e.g., stem, branch and leaf). However, the analysis of biomass?Cdensity relationships for different plant parts is linked to those for whole plants, and thus important for understanding plant strategies for utilizing resources and community dynamics. In our study, we investigated standing stem (M _S), branch (M _B) and leaf (M _L) biomass?Cdensity relationships, across a range of forest communities in China. The results showed that there was no constant predicted value (e.g., ?1/2 or ?1/3 for M _S; ?1/2, ?1/3 or 0 for M _B and M _L) that can describe all the relationships, and that the scaling exponents for stem, branch and leaf biomass varied across different forest types. In particular, standing leaf biomass (leaf biomass per unit area) was not constant in these forest communities. Furthermore, stem biomass?Cdensity lines were steeper than corresponding branch and leaf lines across most of these forest communities.     

Improved Biomass and Hydrocarbon Productivity of Botryococcus braunii by Periodic Ultrasound Stimulation

Ultrasonic treatment was firstly found to accelerate both biomass and hydrocarbon productivities of Botryococcus braunii algal cells cultured in the shake flasks. The most effective sonication strategy was to subject the cells to three 5-min ultrasonic treatments at a 4-day interval using a fixed frequency of 40 kHz and power of 240 W, and the ultrasound-treated algal cells showed the highest biomass productivity of 0.043 g L^?1 day^?1 and the highest hydrocarbon productivity of 13.1 mg L^?1 day^?1 among all ultrasound treatments tested. The improved productivity was proved to be mainly due to the enhancement of both endogenous indole-3-acetic acid (IAA) biosynthesis and membrane permeability in the ultrasound-stimulated algal cells. The efficient ultrasonic stimulation strategy also showed good performance for the algal culture in a 2-L airlift bioreactor. Together, these results not only illustrate the immense potential for an enhanced understanding on ultrasound-stimulated algal cells but also as provide a powerful process intensification method to improve the biomass and hydrocarbon productivity of B. braunii in practice.     

Characterization of cell growth and starch production in the marine green microalga Tetraselmis subcordiformis under extracellular phosphorus-deprived and sequentially phosphorus-replete conditions

Microalgal starch is a potential feedstock for biofuel production. Nutrient stress is widely used to stimulate starch accumulation in microalgae. Cell growth and starch accumulation in the marine green microalga Tetraselmis subcordiformis were evaluated under extracellular phosphorus deprivation with initial cell densities (ICD) of 1.5, 3.0, 6.0, and 9.0?×?10⁶ cells mL^?1. The intracellular stored phosphorus supported cell growth when extracellular phosphorus was absent. The maximum starch content of 44.1 % was achieved in the lowest ICD culture, while the maximum biomass productivity of 0.71 g L^?1 day^?1, starch concentration of 1.6 g L^?1, and starch productivity of 0.30 g L^?1 day^?1 were all obtained in the culture with the ICD of 3.0?×?10⁶ cells mL^?1. Appropriate ICD could be used to regulate the intracellular phosphorus concentration and maintain adequate photosynthetic activity to achieve the highest starch productivity, along with biomass and starch concentration. The recovery of phosphorus-deprived T. subcordiformis in medium containing 0.5, 1.0, or 6.0 mM KH₂PO₄ was also tested. Cell growth and starch accumulation ability could be recovered completely. A phosphorus pool in T. subcordiformis was shown to manipulate its metabolic activity under different environmental phosphorus availability. Though lower starch productivity and starch content were achieved under phosphorus deprivation compared with nitrogen- or sulfur-deprived conditions, the higher biomass and starch concentration make T. subcordiformis a good candidate for biomass and starch production under extracellular phosphorus deprivation.     

Assessment of key biological and engineering design parameters for production of Chlorella zofingiensis (Chlorophyceae) in outdoor photobioreactors

For the design of a large field of vertical flat plate photobioreactors (PBRs), the effect of four design parameters—initial biomass concentration, optical path length, spacing, and orientation of PBRs—on the biochemical composition and productivity of Chlorella zofingiensis was investigated. A two-stage batch process was assumed in which inoculum is generated under nitrogen-sufficient conditions, followed by accumulation of lipids and carbohydrates in nitrogen-deplete conditions. For nitrogen-deplete conditions, productivity was the most sensitive to initial biomass concentration, as it affects the light availability to individual cells in the culture. An initial areal cell concentration of 50 g m^?2 inoculated into 3.8-cm optical path PBR resulted in the maximum production of lipids (2.42?±?0.02 g m^?2 day^?1) and carbohydrates (3.23?±?0.21 g m^?2 day^?1). Productivity was less sensitive to optical path length. Optical path lengths of 4.8 and 8.4 cm resulted in similar areal productivities (biomass, carbohydrate, and lipid) that were 20 % higher than a 2.4-cm optical path length. Under nitrogen-sufficient conditions, biomass productivity was 48 % higher in PBRs facing north–south during the winter compared to east–west, but orientation had little influence on biomass productivity during the spring and summer despite large differences in insolation. An optimal spacing could not be determined based on growth alone because a tradeoff was observed in which volumetric and PBR productivity increased as space between PBRs increased, but land productivity decreased.     

Cultivation of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> with swine wastewater and potential for algal biodiesel production

In this study, an alga-based simultaneous process of treating swine wastewater (SWW) and producing biodiesel was explored. Chlorella vulgaris (UTEX-265) was employed as a model species, and a SWW-based medium was prepared by dilution with tap water. Chlorella vulgaris grew well in the SWW-based medium, and at optimum dilution ratios, it exceeded the conventional culture medium in terms of biomass concentration and productivity. In eightfold diluted SWW, which supported the maximum growth, biomass productivity was 0.247 g L^?1 day^?1, while the productivity was merely 0.165 g L^?1 day^?1 in standard tris-acetate-phosphorous (TAP) algal medium. In addition, fatty acid methyl ester (FAME) productivity was greater in the SWW-based medium (0.067 versus 0.058 g L^?1 day^?1). This enhanced productivity resulted in more than 95 % removal of both nitrogen and phosphorous. All these show that C. vulgaris cultivation is indeed possible in a nutrient-rich wastewater with appropriate dilution, and in so doing, the wastewater can effectively be treated.     

Physiological responses and accumulation of pollutants in woody species under in situ polluted condition in Southern China

Physiological leaf traits and accumulation of pollutants of ten woody species in response to air pollution at seriously polluted site Sanguigang (SGG) and control site Maofengshan (MFS) in Southern China were studied. Net photosynthetic rates of most species at SGG were lower than those at MFS, but stomatal conductance (g_s) showed opposite trend. The specific leaf area of Aporusa dioica, Sapium discolor, Schefflera octophylla and Toxicodendron succedaneum were significantly, 46.77, 13.09, 55.11 and 23.51 %, higher in SGG than in MFS, while chlorophyll content being the opposite. A. dioica had the highest sulphur (S) content at both sites (11.74 mg g^?1 at SGG and 11.07 mg g^?1 at MFS). Heavy metals concentrations were generally higher in species at SGG than at MFS. S. octophylla showed significantly higher concentrations of Zn, Cd and Mn (341.81, 2.41 and 2,287.29 μg g^?1) than other species at SGG. Moreover, A. dioica had the highest Pb concentration (9.19 μg g^?1), and L. glutinosa showed the highest Cr concentration (3.40 μg g^?1). According to the integrated results, we infer that A. dioica, S. octophylla and L. glutinosa are the promising species for phytoremediation in the ceramic industry polluted environment.     

Nutrient Profile of a Contaminated Soil Phytoremediated by Centrosema pubescen and Mucuna pruriens

Soil nutrients contribute to ecosystem-level processes and are important for productivity, community structure, and fertility in terrestrial ecosystems. Crude oil–stressed agricultural soil was subjected to phytoremediation for 12 weeks, and the nutrient status thereafter was characterized to investigate the inherent effects on such soils in relation to nutrient mineralization and community shifts. Manure additions significantly increased Mg, Na, NO₃-N, PO₄ ^?, and SO₄ ^2? contents along with pH values. Accumulated biomass and leaf area measurements were used to monitor nutrient cycles upon amendment addition. Experimental results indicate that after 90 days, the biotreatment had significantly higher levels of monitored nutrients (above 2500 mg/kg NO₃-N) than the unplanted control (<500 mg/kg NO₃-N), and compared well with the uncontaminated control. The results from this study highlighted inherent advantages of phytoremediation as a soil cleanup technique in terms of soil quality recovery and preservation.     

Optimization of biomass and fatty acid productivity of Scenedesmus obliquus as a promising microalga for biodiesel production

Nowadays, microalgae are discussed as a promising feedstock for biodiesel production. The present study examines the possibility of enhancement of fatty acid productivity of Scenedesmus obliquus by modifications of the culture medium composition. The effect of different concentrations of sodium bicarbonate, salinity, potassium nitrate, glycerol and sugarcane molasses on the enhancement of biomass and esterified fatty acids production was studied. NaHCO₃ caused an increase in the biomass productivity at low concentrations (0.5 g L^?1), while negatively affected fatty acid productivity at all tested concentrations. Increase of salinity enhanced both biomass and fatty acid productivity. The optimum NaCl concentration and sea water ratio were 0.94 g L^?1 and 25 % which resulted in 56 and 39 % increase in fatty acid productivity, respectively. Nitrogen deficiency showed increase in fatty acid content by 54 % over control but fatty acid productivity was decreased as a result of growth inhibition. Nitrogen-free cultures and cultures treated with ?50 % concentrations of KNO₃ showed 96 and 42 % decrease in EFA productivity, respectively, as compared with the control. Addition of 0.05 and 0.1 M of glycerol increased the biomass productivity by 6 and 5 %, respectively but showed no significant effect on fatty acid productivity as a result of decrease in fatty acid content. Finally, usage of sugarcane molasses stimulated both biomass and fatty acid content. The increase in fatty acid productivity was 32, 65 and 73 % above the control level at 1, 3 and 5 g L^?1 of sugarcane molasses, respectively.     

Carbon dioxide utilisation of Dunaliella tertiolecta for carbon bio-mitigation in a semicontinuous photobioreactor

Bio-fixation of carbon dioxide (CO₂) by microalgae has been recognised as an attractive approach to offset anthropogenic emissions. Biological carbon mitigation is the process whereby autotrophic organisms, such as microalgae, convert CO₂ into organic carbon and O₂ through photosynthesis; this process through respiration produces biomass. In this study Dunaliella tertiolecta was cultivated in a semicontinuous culture to investigate the carbon mitigation rate of the system. The algae were produced in 1.2-L Roux bottles with a working volume of 1 L while semicontinuous production commenced on day 4 of cultivation when the carbon mitigation rate was found to be at a maximum for D. tertiolecta. The reduction in CO₂ between input and output gases was monitored to predict carbon fixation rates while biomass production and microalgal carbon content are used to calculate the actual carbon mitigation potential of D. tertiolecta. A renewal rate of 45 % of flask volume was utilised to maintain the culture in exponential growth with an average daily productivity of 0.07 g L^?1 day^?1. The results showed that 0.74 g L^?1 of biomass could be achieved after 7 days of semicontinuous production while a total carbon mitigation of 0.37 g L^?1 was achieved. This represented an increase of 0.18 g L^?1 in carbon mitigation rate compared to batch production of D. tertiolecta over the same cultivation period.     

Withanolide A production from Withania somnifera hairy root cultures with improved growth by altering the concentrations of macro elements and nitrogen source in the medium

Withania somnifera is an important medicinal plant that contains withanolides as bioactive compounds. We have investigated the effects of macroelements and nitrogen source in hairy roots of W. somnifera with the aim of optimizing the production of biomass and withanolide A content. The effects of the macroelements NH₄NO₃, KNO₃, CaCl₂, MgSO₄ and KH₂PO₄ at concentrations of 0, 0.5, 1.0, 1.5 and 2.0× strengths and of nitrogen source [NH₄ ⁺/NO₃ ^? (0.00/18.80, 7.19/18.80, 14.38/18.80, 21.57/18.80, 28.75/18.80, 14.38/0.00, 14.38/9.40, 14.38/18.80, 14.38/28.20 and 14.38/37.60 mM)] in Murashige and Skoog medium were evaluated for biomass and withanolide A production. The highest accumulation of biomass (139.42 g l^?1 FW and 13.11 g l^?1 DW) was recorded in the medium with 2.0× concentration of KH₂PO₄, and the highest production of withanolide A was recorded with 2.0× KNO₃ (15.27 mg g^?1 DW). The NH₄ ⁺/NO₃ ^? ratio also influenced root growth and withanolide A production, with both parameters being larger when the NO₃ ^? concentration was higher than that of NH₄ ⁺. Maximum biomass growth (148.17 g l^?1 FW and 14.79 g l^?1 DW) was achieved at NH₄ ⁺/NO₃ ^? ratio of 14.38/37.60 mM, while withanolide A production was greatest (14.68 mg g^?1 DW) when the NH₄ ⁺/NO₃ ^? ratio was 0.00/18.80 mM. The results are useful for the large scale cultivation of Withania hairy root culture for the production of withanolide A.     

Fine root biomass and turnover of two fast-growing poplar genotypes in a short-rotation coppice culture

Background and aims

The quantification of root dynamics remains a major challenge in ecological research because root sampling is laborious and prone to error due to unavoidable disturbance of the delicate soil-root interface. The objective of the present study was to quantify the distribution of the biomass and turnover of roots of poplars (Populus) and associated understory vegetation during the second growing season of a high-density short rotation coppice culture.

Methods

Roots were manually picked from soil samples collected with a soil core from narrow (75 cm apart) and wide rows (150 cm apart) of the double-row planting system from two genetically contrasting poplar genotypes. Several methods of estimating root production and turnover were compared.

Results

Poplar fine root biomass was higher in the narrow rows than in the wide rows. In spite of genetic differences in above-ground biomass, annual fine root productivity was similar for both genotypes (ca. 44 g DM m^?2 year^?1). Weed root biomass was equally distributed over the ground surface, and root productivity was more than two times higher compared to poplar fine roots (ca. 109 g DM m^?2 year^?1).

Conclusions

Early in SRC plantation development, weeds result in significant root competition to the crop tree poplars, but may confer certain ecosystem services such as carbon input to soil and retention of available soil N until the trees fully occupy the site.     

Bioprospecting of thermo- and osmo-tolerant fungi from mango pulp–peel compost for bioethanol production

The persistent edaphic stress on microbial succession due to dynamic changes during composting was explored for selection of multi-stress tolerant microbe(s) desirable for ethanol production. A total of 23 strains were isolated from mango compost using four successive enrichments in YP broth (g l^?1): glucose, 100; 150; 250 with ethanol (40) and cycloheximide (0.4) at 40 °C, pH 6.0. Based on multi-gene ribotyping, 14 yeasts (61 %) of Saccharomycetaceae, 2 filamentous fungi (8.6 %) and 7 bacteria (30.4 %) were obtained. Phenetic and phylogenetic analysis of the 14 yeasts revealed 64.3 % tolerant to 500 g l^?1 glucose, growth at 45 °C and resemblance to Candida sp. (14.3 %), Kluyveromyces marxianus (35.7 %), Pichia kudriavzevii (21.4 %) and Saccharomyces cerevisiae (28.6 %). Assessment of the 14 yeasts in glucose fermentation medium (pH 4.5 at 40 °C) showed ethanol productivity of ≥92 % by 12 yeasts with theoretical yields of 90–97 %. Fermentation of molasses (150 g l^?1 glucose equivalent) by P. kudriavzevii D1C at 40 °C resulted in 73.70 ± 0.02 g l^?1 ethanol and productivity of 4.91 ± 0.01 g l^?1 h^?1. Assessment of P. kudriavzevii D1C revealed multi-stress tolerance towards 5-hydroxymethyl furfural, ethanol (20 %, v/v), high gravity and H₂O₂ (0.3 M) indicating suitability for ethanol production using high gravity molasses and pre-treated lignocellulosic biomass fermentation.     

Climate Responses of Aboveground Productivity and Allocation in Fagus sylvatica: A Transect Study in Mature Forests

According to recent climate change scenarios, temperate forests will be increasingly exposed to droughts in the 21st century which are thought to affect productivity. Although decreasing timber yield with reduced precipitation has frequently been reported from temperate forests, the dependence of forest net primary production (NPP) on precipitation is little understood. In a 3-year transect study (2009–2011) carried out in 12 mature beech forests (Fagus sylvatica) along a precipitation gradient (820–540 mm y^?1) in Northern Germany, we measured all aboveground NPP components (NPP_a; stem wood, leaf mass, flower and fruit production) and analyzed relationships with monthly weather data. Because we measured NPP_a under a broad range of precipitation levels, drought lengths and mast fruiting intensities, the climatic controls of aboveground productivity and carbon allocation could be analyzed in detail. Despite a significant decrease in annual (and growing season) precipitation sums along the transect, NPP_a remained largely invariant in each of the years, but varied remarkably between the years (means of 981, 702, 955 g DM m^?2 y^?1, respectively). Variation in NPP_a was most closely related to current year’s early summer weather conditions (June–July), whereas the patterns of biomass allocation to wood, leaf, and fruit production responded to the previous summer’s weather. Wood production cannot predict NPP_a in beech due to alternative allocation priorities of vegetative and reproductive growth. Our results show that apparent drought-induced reductions in beech timber yield often are the result of allocation shifts toward fruit production triggered by warm and dry weather in the previous summer.     

Enhancing ethanol production from cellulosic sugars using <Emphasis Type="Italic">Scheffersomyces (Pichia) stipitis</Emphasis>

Studies were performed on the effect of CaCO₃ and CaCl₂ supplementation to fermentation medium for ethanol production from xylose, glucose, or their mixtures using Scheffersomyces (Pichia) stipitis. Both of these chemicals were found to improve maximum ethanol concentration and ethanol productivity. Use of xylose alone resulted in the production of 20.68 ± 0.44 g L^?1 ethanol with a productivity of 0.17 ± 0.00 g L^?1 h^?1, while xylose plus 3 g L^?1 CaCO₃ resulted in the production of 24.68 ± 0.75 g L^?1 ethanol with a productivity of 0.21 ± 0.01 g L^?1 h^?1. Use of xylose plus glucose in combination with 3 g L^?1 CaCO₃ resulted in the production of 47.37 ± 0.55 g L^?1 ethanol (aerobic culture), thus resulting in an ethanol productivity of 0.39 ± 0.00 g L^?1 h^?1. These values are 229 % of that achieved in xylose medium. Supplementation of xylose and glucose medium with 0.40 g L^?1 CaCl₂ resulted in the production of 44.84 ± 0.28 g L^?1 ethanol with a productivity of 0.37 ± 0.02 g L^?1 h^?1. Use of glucose plus 3 g L^?1 CaCO₃ resulted in the production of 57.39 ± 1.41 g L^?1 ethanol under micro-aerophilic conditions. These results indicate that supplementation of cellulosic sugars in the fermentation medium with CaCO₃ and CaCl₂ would improve economics of ethanol production from agricultural residues.     

Variation in leaf area index and stand leaf mass of European beech across gradients of soil acidity and precipitation

Leaf area index (LAI, the one-sided foliage area per unit ground surface area) is a key determinant of plant productivity which has a large influence on water and energy exchange between vegetation and the atmosphere. The variation in forest LAI across landscapes and environmental gradients and its causes are not sufficiently understood. We measured the LAI of European beech (Fagus sylvatica) by litter trapping in 23 closed, mature stands across gradients of rainfall and soil acidity or fertility. With a mean LAI of 7.4 m² m⁻² (minimum: 5.6, maximum: 9.5 m² m⁻²), beech stands maintained a comparably high leaf area index with relatively small variation along steep environmental gradients. Contrary to expectation, decreasing water availability (rainfall gradient from 1030 to 520 mm yr⁻¹) or increasing soil acidity (pH 3–7) had no significant effect on LAI. Stand leaf mass (M _l) increased slightly with soil fertility (C/N ratio, base saturation). We regressed parameters of site water availability (rainfall), soil fertility or acidity (pH, base saturation, C/N ratio, exchangeable Mg and Al content), and stand structure (stand age and stem density) against LAI and M _l in order to detect environmental controls of stand leaf area. Stand age was the most influential factor for both LAI and M _l (negative relationship). Stem density and the base saturation of the soil affected M _l significantly, but had a weak influence on LAI. We conclude that the leaf area index of beech is mainly under control of age-related physiological factors, whereas the influence of soil chemistry and rainfall is comparably low.     

Winter warming pulses differently affect plant performance in temperate heathland and grassland communities

Winter air temperature variability is projected to increase in the temperate zone whereas snow cover is projected to decrease, leading to more variable soil temperatures. In a field experiment winter warming pulses were applied and aboveground biomass and root length of four plant species were quantified over two subsequent growing seasons in monocultures and mixtures of two species. The experiment was replicated at two sites, a colder upland site with more snow and a warmer, dryer lowland site. Aboveground biomass of Holcus lanatus declined (?29 %) in the growing season after the warming pulse treatment. Its competitor in the grassland mixture, Plantago lanceolata, profited from this decline by increased biomass production (+18 %). These effects disappeared in the second year. There was a strong decline in biomass for P. lanceolata at the lowland site in the second year. These two species also showed a decline in leaf carbohydrate content during the manipulation. Aboveground productivity and carbohydrate content of the heathland species was not affected by the treatment. The aboveground effects of the treatment did not differ significantly between the two sites, thereby implying some generality for different temperate ecosystems with little and significant amount of snowfall. Root length increased directly after the treatment for H. lanatus and for Calluna vulgaris with a peak at the end of the first growing season. The observed species-specific effects emphasize the ecological importance of winter temperature variability in the temperate zone and appear important for potential shifts in community composition and ecosystem productivity.     

Measurement methods and variability assessment of the Norway spruce total leaf area: implications for remote sensing

Estimation of total leaf area (LA_T) is important to express biochemical properties in plant ecology and remote sensing studies. A measurement of LA_T is easy in broadleaf species, but it remains challenging in coniferous canopies. We proposed a new geometrical model to estimate Norway spruce LA_T and compared its accuracy with other five published methods. Further, we assessed variability of the total to projected leaf area conversion factor (CF) within a crown and examined its implications for remotely sensed estimates of leaf chlorophyll content (C _ab). We measured morphological and biochemical properties of three most recent needle age classes in three vertical canopy layers of a 30 and 100-year-old spruce stands. Newly introduced geometrical model and the parallelepiped model predicted spruce LA_T with an error <5 % of the average needle LA_T, whereas two models based on an elliptic approximation of a needle shape underestimated LA_T by up to 60 %. The total to projected leaf area conversion factor varied from 2.5 for shaded to 3.9 for sun exposed needles and remained invariant with needle age class and forest stand age. Erroneous estimation of an average crown CF by 0.2 introduced an error of 2–3 μg cm^?2 into the crown averaged C _ab content. In our study, this error represents 10–15 % of observed crown averaged C _ab range (33–53 μg cm^?2). Our results demonstrate the importance of accurate LA_T estimates for validation of remotely sensed estimates of C _ab content in Norway spruce canopies.     

Effect of controlled oxygen limitation on Candida shehatae physiology for ethanol production from xylose and glucose

Carbon distribution and kinetics of Candida shehatae were studied in fed-batch fermentation with xylose or glucose (separately) as the carbon source in mineral medium. The fermentations were carried out in two phases, an aerobic phase dedicated to growth followed by an oxygen limitation phase dedicated to ethanol production. Oxygen limitation was quantified with an average specific oxygen uptake rate (OUR) varying between 0.30 and 2.48 mmolO₂ g dry cell weight (DCW)^?1 h^?1, the maximum value before the aerobic shift. The relations among respiration, growth, ethanol production and polyol production were investigated. It appeared that ethanol was produced to provide energy, and polyols (arabitol, ribitol, glycerol and xylitol) were produced to reoxidize NADH from assimilatory reactions and from the co-factor imbalance of the two-first enzymatic steps of xylose uptake. Hence, to manage carbon flux to ethanol production, oxygen limitation was a major controlled parameter; an oxygen limitation corresponding to an average specific OUR of 1.19 mmolO₂ g DCW^?1 h^?1 allowed maximization of the ethanol yield over xylose (0.327 g g^?1), the average productivity (2.2 g l^?1 h^?1) and the ethanol final titer (48.81 g l^?1). For glucose fermentation, the ethanol yield over glucose was the highest (0.411 g g^?1) when the specific OUR was low, corresponding to an average specific OUR of 0.30 mmolO₂ g DCW^?1 h^?1, whereas the average ethanol productivity and ethanol final titer reached the maximum values of 1.81 g l^?1 h^?1 and 54.19 g l^?1 when the specific OUR was the highest.