In vitro measurement of the adherence of Staphylococcus epidermidis to plastic by using cellular urease as a marker.

A rapid and sensitive in vitro assay was developed to quantitatively assess the adherence of Staphylococcus epidermidis to a hydrophobic plastic surface. The assay is based upon the detection of cell-associated urease activity as a marker of bacteria remaining adherent to the polystyrene microwells of flat-bottomed, 96-well tissue culture plates. Using ATCC 35984, a slime-producing strain of S. epidermidis, the assay could detect as few as 3 x 10(3) bacteria and was linear to 3.5 x 10(7) bacteria. The adherence of both slime-positive and slime-negative coagulase-negative staphylococci could be evaluated by using this method. This assay could be used to examine factors which influence the adherence of individual S. epidermidis strains to hydrophobic surfaces and to develop agents or coating materials which suppress the adherence of coagulase-negative staphylococci to biomedical implants.     

In vitro measurement of the adherence of Staphylococcus epidermidis to plastic by using cellular urease as a marker

A rapid and sensitive in vitro assay was developed to quantitatively assess the adherence of Staphylococcus epidermidis to a hydrophobic plastic surface. The assay is based upon the detection of cell-associated urease activity as a marker of bacteria remaining adherent to the polystyrene microwells of flat-bottomed, 96-well tissue culture plates. Using ATCC 35984, a slime-producing strain of S. epidermidis, the assay could detect as few as 3 x 10(3) bacteria and was linear to 3.5 x 10(7) bacteria. The adherence of both slime-positive and slime-negative coagulase-negative staphylococci could be evaluated by using this method. This assay could be used to examine factors which influence the adherence of individual S. epidermidis strains to hydrophobic surfaces and to develop agents or coating materials which suppress the adherence of coagulase-negative staphylococci to biomedical implants.     

Use of a modified Robbins device to directly compare the adhesion of Staphylococcus epidermidis RP62A to surfaces

Staphylococcus epidermidis is a frequent cause of infection associated with the use of biomedical devices. Flow cell studies of the interaction between bacteria and surfaces do not generally allow direct comparison of different materials using the same bacterial suspension. The use of a modified Robbins Device (MRD) to compare the adhesion to different surfaces of Staph. epidermidis RP62A grown in continuous culture was investigated. Adhesion to glass was compared with siliconized glass, plasma-conditioned glass, titanium, stainless steel and Teflon. Attachment to siliconized glass was also compared with glass under differing ionic strength, and divalent cation concentrations. Both the differences in numbers adhering and changes in adhesion (slope) through the MRD were compared. There was a trend towards higher numbers adhering to the discs at the in-flow end of the MRD than at the outflow end, probably reflecting depletion of adherent bacteria in the interacting stream. Adhesion of Staph. epidermidis RP62A to siliconized glass and Teflon was reduced when compared to glass with increasing flow rates. Adhesion to stainless steel was not affected by flow rate and titanium gave a different slope of adhesion through the MRD when compared with glass, suggesting an interaction with different sub-populations within the interacting stream. Differences between siliconized glass and glass at flow rates of 300 ml h-1 were abolished by the addition of calcium or EDTA and reduced by the addition of magnesium. Increasing ionic strength reduced the statistical significance of the differences between glass and siliconized glass. Pre-conditioning of glass with pooled human plasma reduced adhesion compared with untreated glass and again gave a different slope to glass. The MRD linked to a chemostat can be used to compare directly bacterial adhesion to potential biomaterials. Variable depletion of the interacting stream should be taken into account in the interpretation of results. Divalent cation concentration, substrate properties and flow rate were important determinants of the comparative adhesion of Staph. epidermidis RP62A to surfaces.     

A marine bacterial adhesion microplate test using the DAPI fluorescent dye: a new method to screen antifouling agents

AIMS: To develop a method to screen antifouling agents against marine bacterial adhesion as a sensitive, rapid and quantitative microplate fluorescent test. METHODS AND RESULTS: Our experimental method is based on a natural biofilm formed by mono-incubation of the marine bacterium Pseudoalteromonas sp. D41 in sterile natural sea water in a 96-well polystyrene microplate. The 4'6-diamidino-2-phenylindole dye was used to quantify adhered bacteria in each well. The total measured fluorescence in the wells was correlated with the amount of bacteria showing a detection limit of one bacterium per 5 microm(2) and quantifying 2 x 10(7) to 2 x 10(8) bacteria adhered per cm(2). The antifouling properties of three commercial surface-active agents and chlorine were tested by this method in the prevention of adhesion and also in the detachment of already adhered bacteria. The marine bacterial adhesion inhibition rate depending on the agent concentration showed a sigmoid shaped dose-response curve. CONCLUSIONS: This test is well adapted for a rapid and quantitative first screening of antifouling agents directly in seawater in the early steps of marine biofilm formation. Significance AND IMPACT OF THE STUDY: In contrast to the usual screenings of antifouling products which detect a bactericidal activity, this test is more appropriate to screen antifouling agents for bacterial adhesion removal or bacterial adhesion inhibition activities. This screening test focuses on the antifouling properties of the products, especially the initial steps of marine biofilm formation.     

Substrata mechanical stiffness can regulate adhesion of viable bacteria

The competing mechanisms that regulate adhesion of bacteria to surfaces and subsequent biofilm formation remain unclear, though nearly all studies have focused on the role of physical and chemical properties of the material surface. Given the large monetary and health costs of medical-device colonization and hospital-acquired infections due to bacteria, there is considerable interest in better understanding of material properties that can limit bacterial adhesion and viability. Here we employ weak polyelectrolyte multilayer (PEM) thin films comprised of poly(allylamine) hydrochloride (PAH) and poly(acrylic acid) (PAA), assembled over a range of conditions, to explore the physicochemical and mechanical characteristics of material surfaces controlling adhesion of Staphylococcus epidermidis bacteria and subsequent colony growth. Although it is increasingly appreciated that eukaryotic cells possess subcellular structures and biomolecular pathways to sense and respond to local chemomechanical environments, much less is known about mechanoselective adhesion of prokaryotes such as these bacteria. We find that adhesion of viable S. epidermidis correlates positively with the stiffness of these polymeric substrata, independently of the roughness, interaction energy, and charge density of these materials. Quantitatively similar trends observed for wild-type and actin analogue mutant Escherichia coli suggest that these results are not confined to only specific bacterial strains, shapes, or cell envelope types. These results indicate the plausibility of mechanoselective adhesion mechanisms in prokaryotes and suggest that mechanical stiffness of substrata materials represents an additional parameter that can regulate adhesion of and subsequent colonization by viable bacteria.     

Surface thermodynamics of bacterial adhesion.

The adhesion of five strains of bacteria, i.e., Staphylococcus aureus (strain 049), Staphylococcus epidermidis (strain 047), Escherichia coli (strains 055 and 2627), and Listeria monocytogenes, to various polymeric surfaces was studied. The design of the experimental protocol was dictated by thermodynamic considerations. From the thermodynamic model for the adhesion of small particles from a suspension onto a solid substratum, it follows that the extent of adhesion is determined by the surface properties of all three phases involved, i.e., the surface tensions of the adhering particles, of the substrate, and of the suspending liquid medium. In essence, adhesion is more extensive to hydrophilic substrata (i.e., substrata of relatively high surface tension) than to hydrophobic substrata, when the surface tension of the bacteria is larger than that of the suspending medium. When the surface tension of the suspending liquid is larger than that of the bacteria, the opposite pattern of behavior prevails. Suspensions of bacteria at a concentration of 10(8) microorganisms per ml were brought into contact with several polymeric surfaces (Teflon, polyethylene, polystyrene, and acetal and sulfonated polystyrene) for 30 min at 20 degrees C. After rinsing, the number of bacteria adhering per unit surface area was determined by image analysis. The surface tension of the suspending medium. Hanks balanced salt solution, was modified through the addition of various amounts of dimethyl sulfoxide. It was found that the number of bacteria adhering per unit surface area correlates well with the thermodynamic predictions and that these data may be used to determine the surface tension of the different bacterial species. The surface tensions of the bacteria obtained in this fashion are in excellent agreement with those obtained by other methods.     

In vitro antimicrobial activity of a novel propolis formulation (Actichelated propolis)

AIMS: This study compared in vitro activities of Actichelated propolis (a multicomposite material obtained with mechano-chemichal activation) and of a hydroalcoholic extract of propolis. METHODS AND RESULTS: Minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC), determined by means of microdilution broth method, against five strains of Staphylococcus aureus, Streptococcus pyogenes, Haemophilus influenzae, Enterococcus spp., Escherichia coli, Proteus mirabilis and Pseudomonas aeruginosa, showed a greater potency of Actichelated propolis (MIC range: 0.016-4 mg flavonoids ml(-1)) in respect to the hydroalcoholic extract (MIC range: 0.08-21.4 mg flavonoids ml(-1)). Concentrations of Actichelated propolis active against adenovirus, influenza virus, parainfluenza virus and herpes virus type 1 were at least 10 times lower than those of the hydroalcoholic extract. Preincubation of Strep. pyogenes and H. influenzae with subinhibitory concentrations of Actichelated propolis (1/4 and 1/8 x MIC) significantly reduced the number of bacteria that adhered to human buccal cells. CONCLUSIONS: Actichelated propolis has proven to possess antibacterial and antiviral activity higher than a hydroalcoholic extract, being also able to interfere on bacterial adhesion to human oral cells. SIGNIFICANCE AND IMPACT OF THE STUDY: This new formulation of propolis showing better antimicrobial and physical characteristics could improve the application of propolis in respiratory tract infections.     

Comparison of adhesion of the food spoilage bacterium Shewanella putrefaciens to stainless steel and silver surfaces

AIMS: To compare the number of attached Shewanella putrefaciens on stainless steel with different silver surfaces, thus evaluating whether silver surfaces could contribute to a higher hygienic status in the food industry. METHODS AND RESULTS: Bacterial adhesion to three types of silver surface (new silver, tarnished silver and sulphide-treated silver) was compared with adhesion to stainless steel (AISI 316) using the Malthus indirect conductance method to estimate the number of cfu cm(-2). The number of attached bacteria on new silver surfaces was lower than on steel for samples taken after 24 h. However, this was not statistically significant (P > 0.05). The numbers of attached bacteria were consistently lower when tarnished silver surfaces were compared with stainless steel and some, but not all, experiments showed statistical significance (P < 0.05). Treating new silver with sulphide to reproduce a tarnished silver surface did not result in a similar lowering of adhering cells when compared with steel (P > 0.05). CONCLUSIONS: New or tarnished silver surfaces caused a slight reduction in numbers of attached bacteria; however, the difference was only sometimes statistically significant. SIGNIFICANCE AND IMPACT OF THE STUDY: The lack of reproducibility in differences in numbers adhering to the different surfaces and lack of statistical significance between numbers of adhered viable bacteria do not indicate that the tested silver surfaces can be used to improve hygienic characteristics of surfaces in the food industry.     

Microbe repelling coated stainless steel analysed by field emission scanning electron microscopy and physicochemical methods

Coating of stainless steel with diamond-like carbon or certain fluoropolymers reduced or almost eliminated adhesion and biofilm growth of Staphylococcus epidermidis, Deinococcus geothermalis, Meiothermus silvanus and Pseudoxanthomonas taiwanensis. These species are known to be pertinent biofilm formers on medical implants or in the wet-end of paper machines. Field emission scanning electron microscopic analysis showed that Staph. epidermidis, D. geothermalis and M. silvanus grew on stainless steel using thread-like organelles for adhesion and biofilm formation. The adhesion threads were fewer in number on fluoropolymer-coated steel than on plain steel and absent when the same strains were grown in liquid culture. Psx. taiwanensis adhered to the same surfaces by a mechanism involving cell ghosts on which the biofilm of live cells grew. Hydrophilic (diamond-like carbon) or hydrophobic (fluoropolymer) coatings reduced the adherence of the four test bacteria on different steels. Selected topographic parameters, including root-mean-square roughness (S (q)), skewness (S (sk)) and surface kurtosis (S (ku)), were analysed by atomic force microscopy. The surfaces that best repelled microbial adhesion of the tested bacteria had higher skewness values than those only slightly repelling. Water contact angle, measured (theta (m)) or roughness corrected (theta (y)), affected the tendency for biofilm growth in a different manner for the four test bacteria.     

In vitro activity of allicin against Staphylococcus epidermidis and influence of subinhibitory concentrations on biofilm formation

AIMS: The aim of this study is to determine the in vitro activity of allicin against Staphylococcus epidermidis and to evaluate the influence of allicin on biofilm formation. METHODS AND RESULTS: In vitro activity of allicin (diallyl thiosulphinate) against 38 strains of S. epidermidis was investigated. The activity of allicin was similar against S. epidermidis methicillin susceptible and methicillin resistant strains [minimum inhibitory concentration (MIC)90=8 mg l(-1)]. In general, subinhibitory concentrations (sub-MIC) of allicin diminished biofilm formation in the five strains analysed. CONCLUSION: The results confirm the antibacterial effect of allicin. Sub-MICs of allicin also diminished the biofilm formations by S. epidermidis. SIGNIFICANCE AND IMPACT OF THE STUDY: The present study shows that allicin is active in vitro against S. epidermidis and that sub-MICs of allicin may play a role in the prevention of adherence of this bacteria to medical devices.     

Adhesion of coagulase-negative staphylococci to biomaterials

The adhesion of two Staphylococcus epidermidis strains and one Staphylococcus saprophyticus strain on to poly(tetrafluorethylene-co-hexafluorpropylene) (FEP)-fluorocarbon and cellulose acetate was studied in vitro. Both S. epidermidis strains showed a more hydrophobic character than the encapsulated S. saprophyticus as determined by the bacterial affinity towards xylene. Staphylococcus epidermidis showed a significantly higher adhesion on to the hydrophobic FEP than S. saprophyticus. The adhesion of staphylococci on to the more hydrophilic cellulose acetate was always low. Treatment of S. epidermidis with pepsin or extraction with aqueous phenol yielded cells with a decreased hydrophobicity, which resulted in a decreased adhesion on to FEP. Cells with a decreased hydrophobicity showed a lower rate of reaggregation in suspension. The hydrophobicity and the adhesion on the FEP of S. epidermidis were not affected by exposure to a subminimal inhibitory concentration of penicillin. The strong interaction between S. epidermidis and FEP, which appeared not to be influenced by the age or the metabolic stage of the bacteria, is mainly caused by hydrophobic bonding.     

Adhesion of Staphylococcus aureus and Staphylococcus epidermidis to the Episkin reconstructed epidermis model and to an inert 304 stainless steel substrate

AIMS: The aim of this study was to evaluate the respective influence of the physicochemical interactions and the roughness involved in the first part of the biological substrate biocontamination. METHODS AND RESULTS: Therefore we compared the bioadhesion results obtained on the biological model substrate (Episkin) and on a commonly employed inert substrate (AISI 304 stainless steel), frequently used either in dermatology or in development of medical devices. The two studied strains presented different characteristics, both physicochemical and microbiological. Staphylococcus epidermidis, a relatively hydrophobic bacteria capable of exchanging interactions which are principally of the van der Waals type, adhered more to 304 steel than to the surface of reconstituted skin. As for S. aureus, an essentially basic, hydrophilic bacteria, was more adherent to Episkin (a bipolar, hydrophilic substrate) than to stainless steel (a unipolar, basic, hydrophilic substrate). CONCLUSIONS: In the absence of electrostatic interactions, the adhesion of substrate-dependent bacteria to the surface of reconstituted skin was dependent upon the balance between gamma(LW), gamma(+) and gamma(-). SIGNIFICANCE AND IMPACT OF THE STUDY: Consequently, so as to restrict microbial adhesion and reduce adhesive binding between micro-organisms and the surface of the skin, it would be preferable to render this substrate hydrophobic and apolar through the use of appropriate surface treatment.     

Potential occurrence of adhering living Bacillus spores in milk product processing lines

AIMS: The hygienic risk associated with microbial soil on surfaces of milk processing lines was evaluated, based on experimental results. METHODS AND RESULTS: From a panel of Bacillus spores isolated from milk products, B. cereus CUETM 98/4, was found to be highly resistant to heat (D100=3.32 min in whole milk) and oxidant disinfectant (70% lethality of adherent spores with Ikalin 2%). From adhesion trials, up to 1.1 x 10(7) spores cm(-2) were found to be adherent to solid surfaces when suspended in saline or in custard (10(5) and 10(7) cfu ml(-1)), and over 10% of these adherent spores would resist the cleaning procedure. CONCLUSION: A highly contaminated milk (10(5) cfu ml(-1)) subjected to a current sterilization process (8 log reduction) led to a residual contamination of less than 1 cfu in the representative processing line after a complete production run. SIGNIFICANCE AND IMPACT OF THE STUDY: This study highlighted the fact that under appropriate processing conditions (efficient sterilization and cleaning procedures), even disinfection would be sufficient to eliminate any contamination risk. Conversely, the disinfection procedure becomes an essential step under inappropriate processing conditions.     

Resonant mirror biosensor detection method based on yessotoxin-phosphodiesterase interactions

Yessotoxin (YTX) is a generic name for a group of lipophilic compounds recently discovered and chemically characterized. Association measurements were done in a resonant mirror biosensor. The instrument detects changes in the refractive index and/or thickness occurring within a few hundred nanometers form the sensor surface where a molecule is attached. We used aminosilane surfaces where phosphodiesterase 3',5'-cyclic-nucleotide-specific from bovine brain (PDEs) was immobilized. Over this immobilized ligand different amounts of YTX were added and typical association curve profiles were observed. These association curves fit a pseudo-first-order kinetic equation where the apparent association rate constant (k(on)) can be calculated. The value of this constant increases with YTX concentration. From the representation of k(on) versus YTX concentration we obtained the association rate constant (k(ass)) 248+/-40 M(-1)s(-1) and the dissociation rate constant (k(diss)) 9.36 x 10(-4)+/-1.72 x 10(-4)s(-1). From these values the kinetic equilibrium dissociation constant (K(D)) for YTX-PDEs association can be calculated. The value of this last constant is 3.74 x 10(-6)+/-8.25 x 10(-8)M YTX. The PDE-YTX association was used as a method suitable for determination of the toxin concentration in a shellfish sample. The assay had sufficient sensitivity and can be used on simple shellfish extracts.     

Charge transfer during staphylococcal adhesion to TiNOX coatings with different specific resistivity

Adhesion of the bacterial strain Staphylococcus epidermidis 3399 to titanium-oxy-nitride (TiNOX) substrata with different specific resistivities was studied in a parallel plate flow chamber, while simultaneously measuring the electric potential of the substrata. During adhesion, bacteria either donated or accepted electrons to the substrata depending on the specific resistivity of the substratum and bacteria that had donated electrons to the substratum adhered more strongly than bacteria that had accepted electrons from the substratum. These results demonstrate that electron transfer plays a role in bacterial adhesion to conducting surfaces, which has hitherto been neglected.     

Susceptibility of Staphylococcus epidermidis planktonic cells and biofilms to the lytic action of staphylococcus bacteriophage K

AIMS: To evaluate differences in biofilm or planktonic bacteria susceptibility to be killed by the polyvalent antistaphylococcus bacteriophage K. METHODS AND RESULTS: In this study, the ability of phage K to infect and kill several clinical isolates of Staphylococcus epidermidis was tested. Strains were grown in suspension or as biofilms to compare the susceptibility of both phenotypes to the phage lytic action. Most strains (10/11) were susceptible to phage K, and phage K was also effective in reducing biofilm biomass after 24 h of challenging. Biofilm cells were killed at a lower rate than the log-phase planktonic bacteria but at similar rate as stationary phase planktonic bacteria. CONCLUSIONS: Staphylococcus epidermidis biofilms and stationary growth phase planktonic bacteria are more resistant to phage K lysis than the exponential phase planktonic bacteria. SIGNIFICANCE OF STUDY: This study shows the differences in Staph. epidermidis susceptibility to be killed by bacteriophage K, when grown in biofilm or planktonic phenotypes.     

Piezoelectric-excited millimeter-sized cantilever (PEMC) sensors detect Bacillus anthracis at 300 spores/mL

Piezoelectric-excited millimeter-sized cantilever (PEMC) sensors consisting of a piezoelectric and a borosilicate glass layer with a sensing area of 2.48 mm2 were fabricated. Antibody specific to Bacillus anthracis (BA, Sterne strain 7702) spores was immobilized on PEMC sensors, and exposed to spores (300 to 3x10(6) spores/mL). The resonant frequency decreased at a rate proportional to the spore concentration and reached a steady state frequency change of 5+/-5 Hz (n=3), 92+/-7 Hz (n=3), 500+/-10 Hz (n=3), 1030+/-10 Hz (n=2), and 2696+/-6 Hz (n=2) corresponding to 0, 3x10(2), 3x10(3), 3x10(4), and 3x10(6) spores/mL, respectively. The reduction in resonant frequency is proportional to the change in cantilever mass, and thus the observed changes are due to the attachment of spores on the sensor surface. Selectivity of the antibody-functionalized sensor was determined with samples of BA (3x10(6)/mL) mixed with Bacillus thuringiensis (BT; 1.5x10(9)/mL) in various volume ratios that yielded BA:BT ratios of 1:0, 1:125, 1:250, 1:500 and 0:1. The corresponding resonance frequency decreases were, respectively, 2345, 1980, 1310, 704 and 10 Hz. Sample containing 100% BT spores (1.5x10(9)/mL and no BA) gave a steady state frequency decrease of 10 Hz, which is within noise level of the sensor, indicating excellent selectivity. The observed binding rate constant for the pure BA and BT-containing samples ranged from 0.105 to 0.043 min-1 in the spore concentration range 300 to 3x10(6)/mL. These results show that detection of B. anthracis spore at a very low concentration (300 spores/mL) and with high selectivity in presence of another Bacillus spore (BT) can be accomplished using piezoelectric-excited millimeter-sized cantilever sensors.     

Comparative susceptibility of resident and transient hand bacteria to para-chloro-meta-xylenol and triclosan

AIMS: To determine the susceptibility of planktonic and biofilm-grown strains of resident and transient skin bacteria to the liquid hand soap biocides para-chloro-meta-xylenol (PCMX) and triclosan. METHODS AND RESULTS: Freshly isolated hand bacteria were identified by partial 16S rRNA gene sequencing. Two resident and three transient strains, as well as four exogenous potential transient strains, were selected for biocide susceptibility testing. The minimum inhibitory concentrations (MIC) and minimum bactericidal concentrations (MBC) of planktonic cells were determined. Resident and transient strains showed a range of susceptibilities to both biocides (PCMX, MIC 12.5-200 mg x l(-1), MBC 100-400 mg x l(-1); triclosan, MIC 0.6- > 40 mg x l(-1), MBC 1.3- > 40 mg x l(-1)). Strains were attached to polystyrene plates for 65 h in 96-well microtitre plates and challenged with biocide to determine the biofilm inhibitory concentration and biofilm eradicating concentration. For all strains tested, biofilms were two- to eightfold less susceptible than planktonic cells to PCMX. CONCLUSIONS: Very few transients were detected on the hand. Transients were not more sensitive than residents to the biocides and susceptibility to PCMX and triclosan was strain dependent. Biofilm-grown strains were less susceptible to PCMX than planktonic cells. SIGNIFICANCE AND IMPACT OF THE STUDY: The study provides increased knowledge about the susceptibility of skin bacteria to biocides present in typical liquid antibacterial hand soaps and suggests that the concentration of biocide employed in such products is in excess of that required to kill the low numbers of transient bacteria typically found on skin.     

Fibronectin and proteolytic fragments of fibronectin interfere with the adhesion of Staphylococcus epidermidis to plastic

W.M. DUNNE AND E.M. BURD. 1993. The adhesion of five strains of slime-positive Staphylococcus epidermidis to plastic microwells was significantly diminished ( P < 0.005) in a concentration-dependent fashion when wells were previously coated with increasing concentrations (1.6–13.1 μg cm^-2) of human fibronectin (FN). The adhesion of four of five strains was significantly reduced when wells were coated with 3.2 μg cm^-2 of FN and at concentrations ≥6.5 μg cm^-2 the adhesion of all slime-positive strains was significantly reduced. The coating of microwells with chymotryptic fragments of FN containing the heparin-binding, gelatin-binding, or cell-binding domains also reduced bacterial adhesion but none of the fragments exceeded the anti-adhesive activity of intact FN. A comparison of FN-coated or albumin-coated microwells showed that both proteins caused a significant reduction in the adhesion of test strains to plastic but that the anti-adhesive activity of FN was greater than albumin at all concentrations tested. The adhesion of the slime-negative phase variant of one of the test strains to plastic was neither enhanced nor reduced by FN coating indicating that the production of an exopolysaccharide by Staph. epidermidis influences interactions with protein-coated surfaces. These results support the contention that FN does not mediate the adhesion of all strains of Staph. epidermidis to plastic surfaces.     

Ultralow fouling polyacrylamide on gold surfaces via surface-initiated atom transfer radical polymerization

In this work, polyacrylamide is investigated as an ultralow fouling surface coating to highly resist protein adsorption, cell adhesion, and bacterial attachment. Polyacrylamide was grafted on gold surfaces via surface-initiated atom transfer radical polymerization (ATRP). Protein adsorption from a wide range of biological media, including single protein solutions of fibrinogen, bovine serum albumin, and lysozyme, dilute and undiluted human blood serum, and dilute and undiluted human blood plasma, was studied by surface plasmon resonance (SPR). Dependence of the protein resistance on polyacrylamide film thickness was examined. With the optimal film thickness, the adsorption amount of all three single proteins on polyacrylamide-grafted surfaces was <3 pg/mm(2), close to the detection limit of SPR. The average nonspecific adsorptions from 10% plasma, 10% serum, 100% plasma, and 100% serum onto the polyacrylamide-grafted surfaces were 5, 6.5, 17, and 28 pg/mm(2), respectively, comparable (if not better) than the adsorption levels on poly(ethylene glycol) (PEG) and zwitterionic poly(sulfobetaine methacrylate) surfaces, the best antifouling materials known to date. The polyacrylamide-grafted surfaces were also shown strongly resistant to adhesion from bovine aortic endothelial cells and two bacterial species, Gram-positive Staphylococcus epidermidis ( S. epidermidis ) and Gram-negative Pseudomonas aeruginosa ( P. aeruginosa ). Strong hydrogen bond with water is considered the key attribute for the ultralow fouling properties of polyacrylamide. This is the first work to graft gold surfaces with polyacrylamide brushes via ATRP to achieve ultralow fouling surfaces, demonstrating that polyacrylamide is a promising alternative to traditional PEG-based antifouling materials.