Oral health care in private and small long-term care facilities: a qualitative study

Objective: Elderly people who are institutionalised receive qualified care. Among the services supplied, oral health care has not always been a priority. The aim of this study was to identify the characteristics of oral health care provided to the elderly residents in long‐term care facilities (LTC) in Porto Alegre/RS city. Methods: Twelve private and small‐size LTCs (less than 20 residents) participated in this study. All supervisors and 36 carers were interviewed. The data obtained were organised according to the offer of oral health under the following categories: responsibility for oral care, oral care routines, difficulties carrying out oral care routines. Results: The procedures used most often in order of frequency were tooth brushing, prostheses cleaning, use of mouthwashes, soaking of prostheses and cleaning of the tongue. Among the difficulties mentioned were the high cost of dental assistance, the lack of co‐operation both by family members and by the elderly themselves, the oral and general health status of the elderly and the limited time available for carers to carry out the tasks. Oral care is conducted empirically, and the responsibility is left to the carers. Conclusions: Analysis of the statements given reveals that oral care does not follow any kind of protocol or standardisation. The persistence of this situation could lead to unsatisfactory oral health care in private and small LTC facilities.     

Antibiotic resistance in long-term care facilities

Long-term-care facilities (LTCFs) comprise a heterogeneous group of institutions that provide a wide variety of services to diverse groups of patients, most of whom are elderly. Infections are common in LTCFs and these are complicated by antimicrobial-resistant pathogens. The residents in LTCFs have a high frequency of colonization with antimicrobial-resistant organisms, including methicillin-resistant Staphylococcus aureus, vancomycin-resistant enterococci, penicillin-resistant pneumococci, extended spectrum P-lactamase-producing gram-negative organisms, and fluoroquinolone-resistant gram-negative organisms. Although several control programs have been published, up to now there still is a long way to go in this area of health care. This review will briefly touch upon the clinical relevance of antimicrobial resistance in LTCFs.     

Barriers to provision of dental care in long-term care facilities: the confrontation with ageing and death

Objective: The aim of the study was to reveal barriers to providing dental care for residents in long‐term care (LTC) facilities. Design: Participants were selected randomly from the dentist register in Berlin and Saxony, Germany. The sample consisted of 60 self‐employed and 60 employed dentists, a further 60 dentists worked in their own dental practice but also part‐time in an LTC facility. In semi‐structured interviews a questionnaire with 36 statements concerning working conditions, administration and cost, insecurity concerning treatment decisions as well as confrontation with ageing and death was employed. Subsequently, the study participants were asked to rank the four dimensions concerning their impact on the decision against providing dental care in an LTC facility. Results: The random sample was representative in age and gender for the dental register in Berlin and Saxony. Fifty‐six per cent of the participants (63% of the men and 51% of the women; 52% of the self‐employed, 60% of the employed and 56% of the consultant dentists) indicated unfavourable working conditions as biggest obstacle in providing dental care in an LTC‐facility. Thirty‐two per cent of participants rated administration and cost, 7% the insecurity in treatment decisions as major hindrance. Only 5% of the participants rated the confrontation with age and death as substantial barrier. There were no age and gender differences. Dentists in Berlin seemed more concerned about administration and cost of a consultancy activity and less secure in their therapy decisions than the colleagues from Saxony (p < 0.001). Dentists who work partly in LTC facilities were the least concerned about the confrontation with ageing and death (not significant), employed dentist showed the least secure in their treatment decisions (p > 0.001). Conclusion: It can be concluded that the awareness of infra‐structural and financial aspects in providing dental care in LTC facilities should be raised with health politicians and that these aspects should be considered when inaugurating or re‐structuring the consultancy services to LTC facilities. Further it would be desirable to establish more postgraduate training programmes to increase clinical and ethical competence in the area of gerodontology.     

Acquired AmpC type beta-lactamases: an emerging problem in Italian long-term care and rehabilitation facilities

We report the multiple detection of Proteus mirabilis isolates, from 4 different long-term care and rehabilitation facilities (LTCRFs) of Northern Italy, resistant to expanded-spectrum cephalosporins and cephamycins and producing an acquired ampC-like beta-lactamase, named CMY-16. Genotyping by PFGE showed that isolates were clonally related to each other, although not identical. In all isolates the bla(CMY16) gene was not transferable by conjugation and was found to be carried on the chromosome. These results revealed multifocal spreading of a CMY-16 producing P. mirabilis clone in Northern Italy and emphasize the emergence of similar acquired resistance determinants in the LTCRFs setting.     

A scoping review and research synthesis on financing and regulating oral care in long-term care facilities

doi: 10.1111/j.1741‐2358.2011.00575.x A scoping review and research synthesis on financing and regulating oral care in long‐term care facilities Background: Oral health care for frail elders is grossly inadequate almost everywhere, and our knowledge of regulating and financing oral care in this context is unclear. Objective: This scoping study examined and summarised the published literature available and the gaps in knowledge about regulating and financing oral care in long‐term care (LTC) facilities. Methods: We limited the electronic search to reports on regulating and financing oral care, including reports, commentaries, reviews and policy statements on financing and regulating oral health‐related services. Results: The broad electronic search identified 1168 citations, which produced 42 references, including 26 pieces of grey literature for a total of 68 papers. Specific information was found on public and private funding of care and on difficulties regulating care because of professional segregation, difficulties assessing need for care, uncertainty on appropriateness of treatments and issues around scope of professional practice. A wide range of information along with 19 implications and 18 specific gaps in knowledge emerged relevant to financing and regulating oral healthcare services in LTC facilities. Conclusions: Effort has been given to enhancing oral care for frail elders, but there is little agreement on how the care should be regulated or financed within the LTC sector.     

Linear and nonlinear analyses of femoral fractures: Computational/experimental study

This paper describes two new methods for computational fracture analysis of human femur using Quantitative Computed Tomography (QCT) voxel-based finite element (FE) simulation. The paper also reports comprehensive mechanical testing for validation of the methods and evaluation of the required material properties. The analyses and tests were carried out on 15 human femurs under 11 different stance-type loading orientations. Several classical forms of subcapital, transcervical, basicervical, and intertrochanteric fractures plus a specific type of subtrochanteric fracture were created and analyzed. A new procedure was developed for prediction of the strengths and the fracture initiation patterns using a FE-based linear scheme. The predicted and observed fracture patterns were in correspondence, and the FE predictions of the fracture loads were in very good agreement with the experimental results. Moreover, the crack initiation and growth behaviors of two subtrochanteric fractures were successfully simulated through a novel implementation of the cohesive zone model (CZM) within a nonlinear FE analysis scheme. The CZM parameters were obtained through a series of experimental tests on different types of specimens and determination of a variety of material properties for different anatomic regions and orientations. The presented results indicated that the locations and patterns of crack initiation, the sequences of crack growth on different paths, and the compatibility of growth increments agreed very well with the observed specifications. Also, very good agreements were achieved between the measured and simulated fracture loads.     

Impact and control of methicillin-resistant Staphylococcus aureus (MRSA) in long-term care facilities

Infections caused by methicillin-resistant Staphylococcus aureus (MRSA) are a growing concern in long-term care facilities (LTCF). Epidemiologic studies performed in our area have shown high rates of MRSA colonization in elderly residents, and very high rates in some centres. However, the clinical impact of nasal MRSA colonization is often slight. Prevention of MRSA transmission in LTCF includes the application of simple preventive measures with proven effectiveness, such as hand washing, adequately covering of infected wounds, and proper use of antibiotics, without limiting the activities of colonized residents or carrying out active surveillance.     

A new technique for internal fixation of femoral fractures in mice: impact of stability on fracture healing

Mouse models are of increasing interest to study the molecular aspects of fracture healing. Because biomechanical factors greatly influence the healing process, stable fixation of the fracture is of interest also in mouse models. Unlike in large animals, however, there is a lack of mouse models which provide stable osteosynthesis. The purpose of this study was therefore to develop a technique for a more stable fixation of femoral fractures in mice and to analyze the impact of stability on the process of fracture healing. The new technique introduced herein includes an intramedullary pin and an extramedullary metallic clip. Ex vivo biomechanical analysis revealed a significantly higher implant stiffness of our pin-clip technique when compared with previously described intramedullary fixation techniques. In vivo, we studied the course of healing after the more stable fixation with our pin-clip technique and compared the results with that observed after unstable fixation with the pin-clip technique after cutting the clip. After 2 and 5 weeks of fracture healing radiological analysis demonstrated that the more stable fixation with the pin-clip technique results in a significantly higher union rate compared to the unstable fixation. Torsional stiffness at 5 weeks was almost 3-fold of that measured after unstable fixation. Histomorphological analysis further showed that fractures stabilized with the pin-clip technique healed with a smaller periosteal callus area, an increased fraction of bone and a reduced amount of fibrous tissue. Of interest, the pin-clip fixation showed reliable union after 5 weeks, whereas the unstable pin fixation did not regularly achieve adequate fracture healing. In conclusion, we introduce a novel, easily applicable internal osteosynthesis technique in mice, which provides rotational stability after femoral fracture fixation. We further show that a more stable osteosynthesis significantly improves the process of fracture healing also in mice.     

Pathological fractures of the femoral neck

In a review of subcapital fractures due to metastases in the femoral neck it was found that in the majority of cases pain in the region of the hip developed a few days prior to fracture. While the majority of subcapital fractures are sustained as the result of a single incident of trauma, in cases with metastases trabecular stress fractures occur in increasing numbers until finally femoral neck fracture occurs. It would seem that once a critical number of trabecular stress fractures has been reached the patient develops pain. Immediate radiologic examination should be performed, and if there is evidence of bone destruction approaching 50% of the cortex, prophylactic hip pinning is strongly indicated.     

Biomechanical factors affecting fracture stability and femoral bursting in closed intramedullary rod fixation of femur fractures

Intramedullary rodding of femur fractures, although a safe and rapidly performed procedure, can result in several complications. If the rod fit is too loose, fracture instability, rod migration, and delayed union may result. If the rod fit is too tight, cracking of the femur may occur during rod insertion. These complications were investigated in terms of geometric and mechanical parameters of the bone-implant system. Results showed that rods of the same nominal size from different manufacturers showed more than twofold difference in flexural rigidity and a threefold difference in torsional modulus. These differences appear to be due to differences in cross sectional shape and wall thickness of the rods. Measurements of pushout force and hoop stress in cadaver femora showed a large difference in pushout force with different rods, and significantly lower forces in distal than in proximal femoral fracture components. Pushout force decreased with fracture component length proximally and dropped to zero in distal components less than 170 mm long. An increase in ream diameter in the distal components of just 1 mm was found to decrease the mean pushout force from 740N to 90N. The most significant variable was found to be anterior offset of the starting hole more than 6 mm from the centerline of the medullary canal which resulted in consistent lifting of the anterior cortex during insertion of the rod.     

Predicting fracture of the femoral neck

A prediction of the probability of safe loading of the femoral neck, based on queueing theory, is presented. The following methods have been applied: (I) criterion of bone fracture was formulated, taking into consideration the complex state of stress-strain in the porosity zones of the bone; (II) tensile stresses around pores in the stretched zone of the bone were evaluated; (III) the influence of random events of the critical regimes of loading was modeled. The evaluation of the probability of safe loading of bones was obtained based on the levels of the tensile stresses, Young's moduli and ultimate tensile stresses which are affected by the increase in bone porosity and the distribution of the pores. Examples of analysis involving typical mechanical properties of bone in areas of vascular and lacunar-canalicular porosity are demonstrated. The ranges of initial average values of effective Young's moduli and ultimate tensile strengths were taken as 15.8-17.5GPa and 83-95MPa, respectively. The present analysis discovers the existence of three levels of safe loading: (1) a relatively safe level of the nominal tensile stresses (smaller than (2.8-3.2)MPa) where the probability of safe loading is of the order of 0.95 for the bone porosity which is less than 0.15; (2) an intermediate level of safety where the nominal tensile stresses are below (4.2-4.8)MPa and the probability of safe loading is 0.89 or higher, for the same level of bone porosity; (3) a critical level of safe loading where the nominal tensile stresses are about (8.3-9.5)MPa; they lead to sharp drop of probabilities of safe loading to 0.85-0.8 if the porosity is about 0.10 and to probabilities of 0.41-0.4 if the porosity is about 0.15.