钝顶螺旋藻中一种新的模型藻胆体

以钝顶螺旋藻为材料 ,分离得到完整的藻胆体 ,然后用扫描隧道显微镜(STM)对其结构进行研究 .结果表明钝顶螺旋藻藻胆体的结构与传统的半圆盘状结构模型不同 ,藻胆体的杆不是排列在同一平面内 ,而是呈放射状向空间的各个方向伸展 ,藻胆体的直径为 70nm左右 ,杆的长度为 5 0nm左右 ,并且可清楚地观察到藻胆体的杆中圆盘状的藻胆蛋白面对面的聚集在一起 .从藻胆体LB膜的STM图像中也观察到了相同的结果 .藻胆体解离之后 ,STM图像中没有完整藻胆体的结构特征 ,进一步证实前面得到的是完整藻胆体的STM图像 .Chang等人用计算机模拟方法构建了这种放射状结构的藻胆体的理论模型 ,首次用扫描隧道显微镜从三维实空间直接观察到钝顶螺旋藻中这种结构模型的藻胆体的存在 ,并对这种放射状模型的藻胆体的功能进行了讨论 .     

海洋红藻多管藻R—藻红蛋白的体外聚集特性

将海洋红藻R 藻红蛋白 (R PE)吸附到刚揭开的高定向石墨 (HOPG)表面上 ,然后用扫描隧道显微镜 (STM)在纳米尺度上进行直接观察 ,发现纯化的R 藻红蛋白在体外自然聚集时 ,能够“面对面”的聚集在一起 ,形成非常规则的类似藻胆体的杆状结构。将R PE溶于 2 %酒精 /水的混合液中 ,然后滴加于空气 /水界面上 ,具有很好的成膜性能。STM观察结果表明 ,R PE的分子在Langmuir Blodgett膜中的排列方式与其在自然状态下的聚集方式类似 ,圆盘状的R PE分子面对面的聚集在一起形成类似藻胆体的杆状结构 ,这些“杆”状结构进一步聚集在一起形成膜。以上结果表明 ,藻胆蛋白分子在体内以藻胆体的形式存在 ,除了连接肽的作用之外 ,藻胆蛋白自身的结构特性而导致的分子与分子之间的相互作用 ,在藻胆体的组装过程中也起着重要的作用     

钝顶螺旋藻突变株FBL细胞超微结构

利用透射电镜技术观察钝顶螺旋藻出发株和突变株FBL的细胞超微结构。观察结果表明L出发株和突变株均为多细胞丝状体,细胞间横隔膜清晰,细胞壁均由四层结构组成,细胞质膜内陷形成类囊体,类囊体由双层膜堆积而成,膜上附着藻胆体,类囊体与细胞壁呈垂直方向排列,细胞质内包含有充气液泡等细胞器。与出发株相比,突变株细胞壁表面较光滑,四层结构电子密度较深;类囊体膜增多、变发达;羧化体数量增多;横隔膜收缢明显。     

三种藻胆蛋白在复合累积LB膜中的能量传递

制备了R-藻红蛋白(R-PE)、C-藻蓝蛋白(C-PC)及变藻蓝蛋白(APC)的单组分累积LB膜及三组分复合累积LB膜. 吸收及荧光光谱测定表明三种蛋白的LB膜的光谱重叠性质与他们在水溶液中的性质相同. 结构测定表明, 三种蛋白在其LB膜中排列有序, 且由它们组装的复合累积LB膜结构类似于藻类植物中的藻胆体结构. 通过稳态荧光光谱及其光谱解叠, 观察到了三种蛋白在复合累积LB膜中的激发能量传递现象. 根据给体荧光峰的猝灭, 计算出在复合累积LB膜中从给体R-PE经C-PC到受体APC的能量传递效率为51%.     

葡萄糖和乳糖对钝顶螺旋藻生长和色素含量的影响

葡萄糖和乳糖能促进钝顶螺旋藻生物量的增加,降低叶绿素a和类胡萝卜素含量,但对藻胆蛋白含量的影响不显著。比较而言,乳糖更有利于钝顶螺旋藻混养生物量的提高。     

巨大螺旋藻光合放氧和超微结构的研究

选用常温下培养的巨大螺旋藻为材料,对其光合放氧与超微结构进行了观察和研究。结果表明：１）巨大螺旋藻具有较强的放氧能力;２）巨大螺旋藻细胞内存在有含量极丰富的类囊体,气泡,藻胆体及羧化体等特写结构与其光合放氧特性相适应;３）类囊体膜片层在细胞的部分区域已趋于重叠,且封闭成一独立系统存在,具类似真核生物叶绿体的结构;４）从进化角度来看,巨大螺旋藻类囊体膜存在的方式可以作为叶绿体系统演化的证据之一,即真     

铜离子对钝顶螺旋藻完整细胞中光系统Ⅱ活性和藻胆体能量传递的影响

Cu2 抑制钝顶螺旋藻 ( Spirulina platensis)完整细胞中电子传递活性 ( H2 O→ MV) ,并抑制 PS 的放氧活性。低浓度的 Cu2 处理 ,使钝顶螺旋藻细胞中藻蓝蛋白荧光发射峰位置蓝移、发射强度改变 ,表明藻胆体中能量传递发生了变化。Cu2 处理纯化的藻蓝蛋白 ,使其在长波区 ( 61 6— 62 0 nm)吸收减小、荧光发射峰蓝移 ( 64 7nm→ 64 3nm) ;而变藻蓝蛋白不受影响 ,说明 Cu2 选择性作用于藻蓝蛋白。     

FtsZ在钝顶螺旋藻形态建成中的作用

为了研究细胞骨架蛋白FtsZ在螺旋藻形态建成中的作用,通过PCR克隆了ftsZ基因并进行原核表达,对表达的融合蛋白进行了纯化。通过免疫小鼠制备了FtsZ的多克隆抗体。分别用Western blot和免疫荧光技术检测螺旋藻不同形态藻丝体中ftsZ的表达和定位。结果表明,在两株不同螺旋藻Spirulina platensisFACHB869和FACHB882中,ftsZ在直线形藻丝体中的表达量都高于螺旋形藻丝体。免疫荧光定位结果显示,FtsZ蛋白在藻细胞中呈环状分布于细胞膜上,且这种环状结构在直线形藻丝体中排列较密而在螺旋形藻丝体中排列疏松。ftsZ在不同形态藻丝体中的表达量和细胞定位差异说明,细胞骨架蛋白FtsZ可能通过改变细胞刚性而参与螺旋藻形态建成。     

钝顶螺旋藻形态、生长及光合作用对不同波段太阳辐射的响应

为探讨中不同波段的光合有效辐射对钝顶螺旋藻(Arthrospira platensis)形态、生长及光合作用的影响,实验将钝顶螺旋藻D-0083藻液转入带塞的石英管中, 石英管水平置于阳光下并在其上覆盖不同的截止型和带通型滤光片, 以使藻丝接受不同波段的太阳辐射; 并检测其生长、形态与光合活动的变化。结果发现: 所有波段 (320500、395700、510700和610700 nm) 光合有效辐射下的藻丝均螺旋变紧且生物量增加。其中以包含少量紫外辐射A (Ultraviolet-A)的蓝光波段 (320500 nm)和红光波段(600700 nm) 对藻丝形态变化、生长及光合速率的诱发效率较高。在320500、395700、510700和 610700 nm波段上的单位能量光照引起钝顶螺旋藻螺距变化的效率分别为0.070、0.015、0.021、0.045 m/(Wm2)。 波段320500 nm虽然会轻微抑制钝顶螺旋藻D-0083的有效光化学效率(Fv'/Fm')、电子传递速率(ETR)和藻蓝蛋白的荧光发射, 但是却能够有效诱导其藻丝变紧促进生长。此外, 钝顶螺旋藻D-0083的藻丝变紧程度、比生长速率变化与不同波段太阳辐射下藻丝体的光合性能相一致。该研究表明任何波段的光合有效辐射都能使螺旋藻藻丝螺旋变紧并引发生长和光合作用, 其中以蓝光和红光的效率最高。     

硒胁迫对钝顶螺旋藻抗氧化酶系统的影响

在钝顶螺旋藻的对数生长期进行硒胁迫处理,研究硒胁迫强度和硒胁迫时间对钝顶螺旋藻抗氧化酶系统与脂质过氧化作用的影响。设置4个胁迫实验组,分别从第5天到第10天分次加硒,累计加硒量均为1000 mg/L。结果表明,硒胁迫实验组中钝顶螺旋藻的抗氧化酶活性均高于对照组或与对照组相当,其中GPX的变化最大,实验组Ⅰ中的GPX活性为对照组的20.5倍;SOD的变化趋势与GPX相近,但对较低的硒胁迫的响应不敏感;POD、CAT和APX的活性均随硒胁迫强度的减小而上升;各硒胁迫实验组中只有实验组Ⅰ的MDA含量高于对照组;藻体对.OH的清除能力与藻体的MDA含量呈负相关,提示了硒对钝顶螺旋藻抗氧化系统的双重效应。     

Monolayer Film of Phycobilisome-Thylakoid Membrane Complexes from Spirulina platensis

Monolayer films of phycobilisome-thylakoid membrane complexes isolated from Spirulina platensis were prepared at air/aqueous solution interface by using the Langmuir-Blodgett technique. The film preparation was optimized with 0.5 M phosphate buffer (pH 7.0) as sub-phase at 20 °C. The monolayer was transferred into grids and into mica surface for observing the surface image of the complexes by transmission electron microscopy and atomic force microscope, respectively. The shape of complexes was disk-like with the diameter of about 50 nm and the thickness of about 35 nm. The absorption and fluorescence spectra of the complexes in the monolayer were consistent with those in buffer solution, which suggests that the complexes in the monolayer preserve the basic functional groups of photosynthetic apparatus and can be used as a model to investigate the structural connection and functional association of the light-harvesting antenna with the reaction centres.     

Fabrication of Large-scale Nanostructure by Langmuir-Blodgett Technique

Monolayer of polymer latex spheres was prepared at the air/water interface and deposited onto glass slides through Langmuir-Blodgett （LB） technique. Large-scale, high quality hexagonally close-packed domains were found in scanning electron microscopic pictures. Details of the monolayer-forming ability were discussed. Suitable surface characteristics of the colloidal particles, especially the hydrophilic and hydrophobic properties, are the keys for the formation of ordered monolayer films. The film can be transferred onto various kinds of substrates, even high curvature surface articles, such as fibers, decorations etc, can also be used as substrates. The advantages of this fabrication method of polymer latex spheres monolayer are fast, flexible, simple and very neat.     

A simple method for estimating surfactant impurities in solvents and subphases used for monolayer studies

It is important to assess levels of surface active impurities in solutions used for characterization of monomolecular films and for deposition of Langmuir-Blodgett multilayers. Traditional surface pressure-area measurements lack sufficient sensitivity because of the extremely low surface pressures surfactants exhibit below the formation of a coherent film. In contrast, surface potential measurements at the gas-liquid interface increase in a surfactant-dependent manner in the gaseous-liquid expanded transition region. Using this property of such films together with area reduction, levels of impurities representing less than or equal to 0.1% of a typical coherent monolayer can be quantitated. The measurement does not require ultrapure reference materials and can be performed on a solution immediately before spreading and compression of an experimental monolayer film.     

Preparation and characterization of monolayer and multilayer Langmuir-Blodgett films of a series of 6-O-alkylcelluloses

Monolayer and multilayer Langmuir-Blodgett (LB) films of 6-O-alkylcelluloses with various chain lengths were prepared and studied. The surface pressure (pi)-area (A) isotherms of 6-O-alkylcelluloses exhibited characteristic behaviors depending on the length of the alkyl chain and temperature. 6-O-Stearylcellulose on the subphase formed a homogeneous monolayer at 10 mN m(-1). By transfer ratio, FT-IR, and contact angle measurements, it was proved that the monolayer of 6-O-stearylcellulose on the water surface was transferred successfully onto a substrate by a vertical dipping method to form a Z-type LB film. The transmission and reflection absorption IR spectrum indicated that the hydrocarbon chains had all-trans rotamers and were oriented nearly perpendicular to the surface in the film. AFM section analysis revealed that the thickness per layer was calculated to be 2.35 nm. These results suggested that the hydrocarbon chains were inclined at an angle of about 25.3 degrees to have high packing density in the alkyl region.     

Direct electrochemistry of hemoglobin immobilized on gold electrode by Langmuir-Blodgett technique

In this research, we reported a novel method of forming hemoglobin (Hb)-linoleic acid (LA) Langmuir-Blodgett (LB) monolayer by spreading Hb solution directly onto the subphase covered with a layer of LA. This method is suitable for preparing electrochemical devices with protein-lipid LB film because almost no protein adsorbed on electrode surface before protein-lipid film transferred from air-water interface to electrode, which ensured better electrode activity. The compressibility of Hb-LA monolayer was used to character the phase transition during compression process. Optimal experimental conditions were obtained by analyzing pressure-time, pressure-area and pressure-compressibility curves. The direct electrochemistry of Hb, which was immobilized on Au electrode surface incorporated with LA layer by LB method, was investigated using cyclic voltammetry for the first time. The electrode modified with Hb-LA LB film holds high electrochemical activity and shows a fast direct electron transfer of Hb. Redox peak currents increased linearly with the increase of scan rate, indicating a surface-controlled electrode process. The electron transfer rate constant was 2.68+/-0.45 s-1. As a target of this research, this work provides a new way to prepare biomimetic film and biosensor.     

Preferential orientation of an immunoglobulin in a glycolipid monolayer controlled by the disintegration kinetics of proteo-lipidic vesicles spread at an air-buffer interface

The insertion of immunoglobulin (IgG) in a glycolipid monolayer was achieved by using the ability of new proteo-glycolipid vesicles to disintegrate into a mixed IgG-glycolipid interfacial film after spreading at an air-buffer interface. The interfacial disintegration kinetics was shown to be directly dependent on the initial vesicle surface density and on the buffer ionic strength. The presence of the immunoglobulin in the glycolipid film was displayed by an increase of the lateral compressibility (Cs) during monolayer compression. Cs magnitude modifications, due to the antibody effect on the monolayer packing, decreases as the spread vesicle density increases. At interfacial saturation, the lateral compressibility profile becomes similar to that of a control monolayer without antibody. However, the careful analysis of the mixed monolayer after transfer by Langmuir-Blodgett technique (ATR-FTIR characterisation, enzyme immunoassociation) clearly demonstrated that the antibody was still present in such conditions and was not completely squeezed out from the interface as compressibility changes could have meant. At nonsaturating vesicle surface density, IgG molecules initially lying in the lipid matrix with the Y-shape plane parallel to the interface move to a standing-up position during the compression, leading to lateral compressibility modifications. For a saturating vesicle surface density, the glycolipid molecules force the IgG molecules to directly adopt a more vertical position in the interfacial film and, consequently, no lateral compressibility modification was recorded during the compression.     

A quartz crystal microbalance method for rapid detection and differentiation of shiga toxins by applying a monoalkyl globobioside as the toxin ligand

A simple globobiosyl (Gb2) ceramide mimic carrying a monoalkyl chain (C18) was applied for a monolayer Langmuir-Blodgett (L-B) technique to detect Shiga toxins (Stxs) by a quartz crystal microbalance (QCM) method. The artificial glycolipid, synthesized from penta-O-acetyl-D-galactopyranose via a conventional glycosidation pathway, was developed at the air-water surface for the formation of the monolayer film. Then, the film was transferred onto a QCM cell surface modified with alkanethiols. Upon the addition of each of Stx-1 and Stx-2, the decrease of frequency reached saturation within 45 min at a few nanogram order per quartz cell. Binding constants (Ka) estimated for each of Stx-1 and Stx-2 showed little difference between the two toxins. On the other hand, in the presence of an artificial acrylamido Gb2 copolymer as a competitive inhibitor, the two toxins showed a large difference in the binding behavior to the L-B monolayer.     

Fabrication of Langmuir-Blodgett film of a fullerene derivative with a cyclic peptide as an anchor

A novel cyclic octapeptide carrying a fullerene unit and poly(ethylene glycol) at the side chain (cyclo8-C 60 + PEG) was synthesized, and its monolayer formation at the air/water interface and on a substrate was studied. Surface pressure-area per molecule isotherms indicated that cyclo8-C 60 + PEG formed a stable monolayer at the air/water interface. The cyclo8-C 60 + PEG monolayers prepared from various spreading volumes (i.e., from various initial areas per molecule) overlapped nicely on a single curve, suggesting that the molecules were uniformly dispersed on the surface without aggregation of the fullerene units. The uniform dispersibility is due to the scaffold effect of the cyclic peptide unit to keep the fullerene units away from each other. The formed monolayer could be quantitatively transferred onto a solid substrate. UV-vis absorption spectroscopy of the Langmuir-Blodgett (LB) monolayer showed that the electronic structure of the fullerene unit was not affected by the formation of the monolayer. Cyclic voltammetry of the LB monolayer in an aqueous solution containing redox species indicated that the LB monolayer was densely packed. Furthermore, reversible redox peaks attributed to the one-electron reduction of the fullerene unit were observed, showing that the redox property of the fullerene unit was also retained in the monolayer. It is thus concluded that the cyclic peptide is a good candidate as a scaffold for stable monolayer formation at the air/water interface and for intact immobilization of the fullerene moiety onto a substrate.     

Large-scale recrystallization of the S-layer of Bacillus coagulans E38-66 at the air/water interface and on lipid films.

S-layer protein isolated from Bacillus coagulans E38-66 could be recrystallized into large-scale coherent monolayers at an air/water interface and on phospholipid films spread on a Langmuir-Blodgett trough. Because of the asymmetry in the physiochemical surface properties of the S-layer protein, the subunits were associated with their more hydrophobic outer face with the air/water interface and oriented with their negatively charged inner face to the zwitterionic head groups of the dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylethanolamine (DPPE) monolayer films. The dynamic crystal growth at both types of interfaces was first initiated at several distant nucleation points. The individual monocrystalline areas grew isotropically in all directions until the front edge of neighboring crystals was met. The recrystallized S-layer protein and the S-layer-DPPE layer could be chemically cross-linked from the subphase with glutaraldehyde.