Identification of microbes from the surfaces of food-processing lines based on the flow cytometric evaluation of cellular metabolic activity combined with cell sorting

In this study the design of a flow cytometry-based procedure to facilitate the detection of adherent bacteria from food-processing surfaces was evaluated. The measurement of the cellular redox potential (CRP) of microbial cells was combined with cell sorting for the identification of microorganisms. The procedure enhanced live/dead cell discrimination owing to the measurement of the cell physiology. The microbial contamination of the surface of a stainless steel conveyor used to process button mushrooms was evaluated in three independent experiments. The flow cytometry procedure provided a step towards monitoring of contamination and enabled the assessment of microbial food safety hazards by the discrimination of active, mid-active and non-active bacterial sub-populations based on determination of their cellular vitality and subsequently single cell sorting to isolate microbial strains from discriminated sub-populations. There was a significant correlation (r = 0.97; p < 0.05) between the bacterial cell count estimated by the pour plate method and flow cytometry, despite there being differences in the absolute number of cells detected. The combined approach of flow cytometric CRP measurement and cell sorting allowed an in situ analysis of microbial cell vitality and the identification of species from defined sub-populations, although the identified microbes were limited to culturable cells.     

Phospholipid analysis as a tool to study complex microbial communities in marine sediments.

To complement information on microbial communities in marine sediments that can be obtained using microbiological methods, we developed an analytical procedure to trace microbial lipids in environmental samples. We focused on analyzing intact phospholipids as these membrane constituents are known to be biomarkers for viable cells. Analysis of intact phospholipids from a fractionated and preconcentrated sediment extract was achieved using liquid chromatography-electrospray ionization-mass spectrometry (HPLC-ESI-MS). The combined analysis of phospholipid types and their fatty acid substituents allowed a differentiation between various groups of microorganisms living in the sediment. For comparison three strains of marine sulfate-reducing bacteria (SRB) were analysed for their lipid content.     

Identifying pioneer bacterial species responsible for biofouling membrane bioreactors

More effective control of membrane biofouling in membrane bioreactors (MBRs) lies in the fundamental understanding of the pioneer microorganisms responsible for surface colonization that leads to biofilm formation. In this study, the composition of the planktonic and sessile microbial communities inhabiting four laboratory-scale MBR systems were compared using amplified ribosomal DNA restriction analysis (ARDRA) and 16S ribosomal DNA gene sequencing. The ARDRA results suggest that the microbial communities on membrane surfaces could be very different from the ones in the suspended biomass. Phylogenetic analysis based on the 16S rRNA gene sequences provided a list of bacteria that might be the pioneers of surface colonization on microfiltration membranes. The results further suggested that research on the mechanisms of cell attachment in such an engineering environment could be critical for future development of appropriate biofouling control strategies.     

The role of secondary ion mass spectrometry (SIMS) in biological microanalysis: technique comparisons and prospects.

The virtues and limitations of SIMS ion microscopy are compared with other spectroscopic techniques applicable to biological microanalysis, with a special emphasis on techniques for elemental localization in biological tissue (electron, X-ray, laser, nuclear, ion microprobes). Principal advantages of SIMS include high detection sensitivity, high depth resolution, isotope specificity, and possibilities for three-dimensional imaging. Current limitations, especially in comparison to X-ray microanalysis, center on lateral spatial resolution and quantification. Recent SIMS instrumentation advances involving field emission liquid metal ion sources and laser post-ionization will help to minimize these limitations in the future. The molecular surface analysis capabilities of static SIMS, especially with the new developments in commercial time-of-flight spectrometers, are promising for application to biomimetic, biomaterials, and biological tissue or cell surfaces. However, the direct microchemical imaging of biomolecules in tissue samples using SIMS will be hindered by limited concentrations, small analytical volumes, and the inefficiencies of converting surface molecules to structurally significant gas phase ions. Indirect detection using elemental or isotopically tagged molecules, however, shows considerable promise for molecular imaging studies using SIMS ion microscopy.     

Perspectives on microbial cell surface display in bioremediation

The display of heterologous proteins on the microbial cell surface by means of recombinant DNA biotechnologies has emerged as a novel approach for bioremediation of contaminated sites. Both bacteria and yeasts have been investigated for this purpose. Cell surface expression of specific proteins allows the engineered microorganisms to transport, bio-accumulate and/or detoxify heavy metals as well as to degrade xenobiotics. These otherwise would not be taken up and transformed by the microbial cell. This review focuses on the application of cell surface displays for the enhanced bio-accumulation of heavy metals by metal binding proteins. It also reviews the biodegradation of xenobiotics by enzymes/proteins expressed on microbial cell surfaces.     

Monitoring surface chemical changes in the bacterial cell wall: multivariate analysis of cryo-x-ray photoelectron spectroscopy data

Gram-negative bacteria can alter the composition of the lipopolysaccharide (LPS) layer of the outer membrane as a response to different growth conditions and external stimuli. These alterations can, for example, promote attachment to surfaces and biofilm formation. The changes occur in the outermost layer of the cell and may consequently influence interactions between bacterial cells and surrounding host tissue, as well as other surfaces. Microscopic analyses, fractionation of bacterial cells, or other traditional microbiological assays have previously been used to study these alterations. These methods can, however, be time consuming and do not always give detailed chemical information about the bacterial cell surface. We here present an analytical method that provides chemical information on the outermost portion of bacterial cells with respect to protein, peptidoglycan, lipid, and polysaccharide content. The method involves cryo-x-ray photoelectron spectroscopy analyses of the outermost portion (within ～10 nm of the surface) of intact bacterial cells followed by a multivariate curve resolution analysis of carbon spectra. It can be used as a tool for characterizing and monitoring variations in the chemical composition of bacterial cell walls or of isolated outer membrane vesicles, variations that result from e.g. mutations or external stimuli. The method enabled us to predict accurately the alterations in polysaccharide content and surface chemistries of a set of well characterized Escherichia coli LPS mutants. The described approach may moreover be applied to monitor surface chemical composition of other biological samples.     

Computer simulation of the rough lipopolysaccharide membrane of Pseudomonas aeruginosa.

Lipopolysaccharides (LPSs) form the major constituent of the outer membrane of Gram-negative bacteria, and are believed to play a key role in processes that govern microbial metal binding, microbial adsorption to mineral surfaces, and microbe-mediated oxidation/reduction reactions at the bacterial exterior surface. A computational modeling capability is being developed for the study of geochemical reactions at the outer bacterial envelope of Gram-negative bacteria. A molecular model for the rough LPS of Pseudomonas aeruginosa has been designed based on experimentally determined structural information. An electrostatic model was developed based on Hartree-Fock SCF calculations of the complete LPS molecule to obtain partial atomic charges. The exterior of the bacterial membrane was assembled by replication of a single LPS molecule and a single phospholipid molecule. Molecular dynamics simulations of the rough LPS membrane of P. aeruginosa were carried out and trajectories were analyzed for the energetic and structural factors that determine the role of LPS in processes at the cell surface.     

Surface Potential Measurement of Bacteria Using Kelvin Probe Force Microscopy

Surface potential is a commonly overlooked physical characteristic that plays a dominant role in the adhesion of microorganisms to substrate surfaces. Kelvin probe force microscopy (KPFM) is a module of atomic force microscopy (AFM) that measures the contact potential difference between surfaces at the nano-scale. The combination of KPFM with AFM allows for the simultaneous generation of surface potential and topographical maps of biological samples such as bacterial cells. Here, we employ KPFM to examine the effects of surface potential on microbial adhesion to medically relevant surfaces such as stainless steel and gold. Surface potential maps revealed differences in surface potential for microbial membranes on different material substrates. A step-height graph was generated to show the difference in surface potential at a boundary area between the substrate surface and microorganisms. Changes in cellular membrane surface potential have been linked with changes in cellular metabolism and motility. Therefore, KPFM represents a powerful tool that can be utilized to examine the changes of microbial membrane surface potential upon adhesion to various substrate surfaces. In this study, we demonstrate the procedure to characterize the surface potential of individual methicillin-resistant Staphylococcus aureus USA100 cells on stainless steel and gold using KPFM.     

Growth temperature and OprF porin affect cell surface physicochemical properties and adhesive capacities of <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> MF37

Pseudomonads adapt to various ecological niches by forming biofilms, which first requires bacterial adhesion on surfaces. We studied the influence of growth temperature on surface physicochemical properties of Pseudomonas fluorescens MF37 and on its adhesive capacities onto inert surfaces. It presented a global hydrophilic character, measured by microbial adhesion to solvent (MATS), and showed a cell surface more hydrophilic at 8 and 28°C than at 17°C. Moreover, P. fluorescens MF37 was more adhesive at 17°C. This critical temperature thus should be carefully taken into account in food safety. Adhesion onto inert surfaces is thus influenced by the growth temperature, which modifies the bacteria cell wall properties through changes in the outer membrane components. Therefore, we studied the effect of the loss of OprF, the major outer membrane protein, known to act as an adhesin (root, and endothelial cells). The OprF-deficient mutant was able to adhere to surfaces, but showed the same physicochemical and adhesion properties on abiotic surfaces whatever the growth temperature. OprF is thus not essential in this adhesion process. However, we suggest that OprF is involved in the bacterial environmental temperature sensing by P. fluorescens.This work was supported by a grant from the Région Bretagne (Doctoral fellowship to G.H.).     

Effects of larval mosquitoes (Aedes triseriatus) and stemflow on microbial community dynamics in container habitats.

The dynamics of the microbial food sources for Aedes triseriatus larvae in microcosms were found to be strongly influenced by larval presence. The total abundance of bacteria in water samples generally increased in response to larvae, including populations of cultivable, facultatively anaerobic bacteria. Additionally, a portion of the community shifted from Pseudomonaceae to Enterobacteriaceae. Bacterial abundance on leaf material was significantly reduced in the presence of actively feeding larvae. Principle-component analysis of whole community fatty acid methyl ester (FAME) profiles showed that larvae changed the microbial community structure in both the water column and the leaf material. Cyclopropyl FAMEs, typically associated with bacteria, were reduced in microcosms containing larvae; however, other bacterial fatty acids showed no consistent response. Long-chain polyunsaturated fatty acids characteristic of microeukaryotes (protozoans and meiofauna) declined in abundance when larvae were present, indicating that larval feeding reduced the densities of these microorganisms. However, presumed fungal lipid markers either increased or were unchanged in response to larvae. Larval presence also affected microbial nitrogen metabolism through modification of the physiochemical conditions or by grazing on populations of bacteria involved in nitrification-denitrification. Stemflow primarily influenced inorganic ion and organic compound concentrations in the microcosms and had less-pronounced effects on microbial community parameters than did larval presence. Stemflow treatments diluted concentrations of all inorganic ions (chloride, sulfate, and ammonium) and organic compounds (total dissolved organic carbon, soluble carbohydrates, and total protein) measured, with the exceptions of nitrite and nitrate. Stemflow addition did not measurably affect larval biomass in the microcosms but did enhance development rates and early emergence patterns of adults.     

Use of gas chromatography-ion trap tandem mass spectrometry for the detection and characterization of microorganisms in complex samples

Gas chromatography-mass spectrometry (GC-MS) can be applied to detect and characterize microorganisms in clinical and environmental samples, and microbial contaminants in biotechnological production cultures. With this approach, unique microbial monomeric compounds, known as chemical markers, are used as analytes. In the present article, two GC-MS-based techniques, viz. GC-ion trap tandem MS (GC-MS-MS) and conventional quadrupole GC-MS used in the selected ion monitoring mode, were compared regarding their ability to detect 3-hydroxy fatty acids, muramic acid, and ergosterol (markers for endotoxin, peptidoglycan, and fungal biomass, respectively) in complex matrices. When using GC-MS-MS, daughter ion spectra were obtained for all markers present in amounts close to the detection limit of the GC-MS. Ion-trap GC-MS-MS shows great promise as a chemical marker analysis technique for application in clinical diagnosis, occupational and public health care, and biotechnology.     

Marine Siderophores and Microbial Iron Mobilization

Iron is essential for the growth of nearly all microorganisms yet iron is only sparingly soluble near the neutral pH, aerobic conditions in which many microorganisms grow. The pH of ocean water is even higher, thereby further lowering the concentration of dissolved ferric ion. To compound the problem of availability, the total iron concentration is surprisingly low in surface ocean water, yet nevertheless, marine microorganisms still require iron for growth. Like terrestrial bacterial, bacteria isolated from open ocean water often produce siderophores, which are low molecular weight chelating ligands that facilitate the microbial acquisition of iron. The present review summarizes the structures of siderophores produced by marine bacteria and the emerging characteristics that distinguish marine siderophores.     

Characterizing the effect of polymyxin B antibiotics to lipopolysaccharide on Escherichia coli surface using atomic force microscopy

Lipopolysaccharide (LPS) on gram‐negative bacterial outer membranes is the first target for antimicrobial agents, due to their spatial proximity to outer environments of microorganisms. To develop antibacterial compounds with high specificity for LPS binding, the understanding of the molecular nature and their mode of recognition is of key importance. In this study, atomic force microscopy (AFM) and single molecular force spectroscopy were used to characterize the effects of antibiotic polymyxin B (PMB) to the bacterial membrane at the nanoscale. Isolated LPS layer and the intact bacterial membrane were examined with respect to morphological changes at different concentrations of PMB. Our results revealed that 3 hours of 10 μg/mL of PMB exposure caused the highest roughness changes on intact bacterial surfaces, arising from the direct binding of PMB to LPS on the bacterial membrane. Single molecular force spectroscopy was used to probe specific interaction forces between the isolated LPS layer and PMB coupled to the AFM tip. A short range interaction regime mediated by electrostatic forces was visible. Unbinding forces between isolated LPS and PMB were about 30 pN at a retraction velocity of 500 nm/s. We further investigated the effects of the polycationic peptide PMB on bacterial outer membranes and monitored its influences on the deterioration of the bacterial membrane structure. Polymyxin B binding led to rougher appearances and wrinkles on the outer membranes surface, which may finally lead to lethal membrane damage of bacteria. Our studies indicate the potential of AFM for applications in pathogen recognition and nano‐resolution approaches in microbiology.     

纳米二次离子质谱技术(NanoSIMS)在微生物生态学研究中的应用

超高分辨率显微镜成像技术与同位素示踪技术相结合的纳米二次离子质谱技术(NanoSIMS)具有较高的灵敏度和离子传输效率、极高的质量分辨率和空间分辨率(＜ 50 nm),代表着当今离子探针成像技术的最高水平.利用稳定性或者放射性同位素在原位或者微宇宙条件下示踪目标微生物,然后将样品进行固定、脱水、树脂包埋或者导电镀膜处理,制备成可供二次离子质谱分析的薄片,进一步通过NanoSIMS成像分析,不仅能够在单细胞水平上提供微生物的生理生态特征信息,而且能够准确识别复杂环境样品中的代谢活跃的微生物细胞及其系统分类信息,对于认识微生物介导的元素生物地球化学循环机制具有重要意义.介绍了纳米二次离子质谱技术的工作原理和技术路线,及其与同位素示踪技术、透射电子显微镜(TEM)、扫描电子显微镜(SEM)、荧光原位杂交技术(FISH)、催化报告沉积荧光原位杂交技术(CARD-FISH)、卤素原位杂交技术(Halogen In Situ Hybridization,HISH)等联合使用在微生物生态学研究方面的应用.     

Display of proteins on bacteria

Display of heterologous proteins on the surface of microorganisms, enabled by means of recombinant DNA technology, has become an increasingly used strategy in various applications in microbiology, biotechnology and vaccinology. Gram-negative, Gram-positive bacteria, viruses and phages are all being investigated in such applications. This review will focus on the bacterial display systems and applications. Live bacterial vaccine delivery vehicles are being developed through the surface display of foreign antigens on the bacterial surfaces. In this field, 'second generation' vaccine delivery vehicles are at present being generated by the addition of mucosal targeting signals, through co-display of adhesins, in order to achieve targeting of the live bacteria to immunoreactive sites to thereby increase immune responses. Engineered bacteria are further being evaluated as novel microbial biocatalysts with heterologous enzymes immobilized as surface exposed on the bacterial cell surface. A discussion has started whether bacteria can find use as new types of whole-cell diagnostic devices since single-chain antibodies and other type of tailor-made binding proteins can be displayed on bacteria. Bacteria with increased binding capacity for certain metal ions can be created and potential environmental or biosensor applications for such recombinant bacteria as biosorbents are being discussed. Certain bacteria have also been employed for display of various poly-peptide libraries for use as devices in in vitro selection applications. Through various selection principles, individual clones with desired properties can be selected from such libraries. This article explains the basic principles of the different bacterial display systems, and discusses current uses and possible future trends of these emerging technologies.     

Soil and plant effects on microbial community structure

We investigated the effects of two different plant species (corn and soybean) and three different soil types on microbial community structure in the rhizosphere. Our working hypothesis was that the rhizosphere effect would be strongest on fast-growing aerobic heterotrophs, while there would be little or no rhizosphere effect on oligotrophic and other slow-growing microorganisms. Culturable bacteria and fungi had larger population densities in the rhizosphere than in bulk soil. Communities were characterized by soil fatty acid analysis and by substrate utilization assays for bacteria and fungi. Fatty acid analysis revealed a very strong soil effect but little plant effect on the microbial community, indicating that the overall microbial community structure was not affected by the rhizosphere. There was a strong rhizosphere effect detected by the substrate utilization assay for fast-growing aerobic heterotrophic bacterial community structure, with soil controls and rhizosphere samples clearly distinguished from each other. There was a much weaker rhizosphere effect on fungal communities than on bacterial communities as measured by the substrate utilization assays. At this coarse level of community analysis, the rhizosphere microbial community was impacted most by soil effects, and the rhizosphere only affected a small portion of the total bacteria.     

Role of polymer complexes in the formation of biofilms by corrosive bacteria on steel surfaces

The composition of exopolymer complexes (EPCs), synthesized by the monocultures Desulfovibrio sp. 10, Bacillus subtilis 36, and Pseudomonas aeruginosa 27 and by microbial associations involved in the corrosion of metal surfaces has been studied. An analysis of the monosaccharide composition of carbohydrate components, as well as the fatty acid composition of the lipid part of EPCs, was carried out by gas-liquid chromatography (GLC). It was found that bacteria in biofilms synthesized polymers; this process was dominated by glucose, while the growth of bacteria in a suspension was marked by a high rhamnose content. Hexouronic acids and hexosamine have been revealed as a part of B. subtilis 36 and P. aeruginosa 27 EPCs. Qualitative differences were revealed in the fatty acid composition ofexopolymers in biofilms and in a bacterial suspension. It was shown that the transition to a biofilm form of growth led to an increase in the unsaturation degree of fatty acids in the exopolymers of associative cultures. The results can be used to develop methods to control microbial corrosion of metal surfaces.     

Effects of Larval Mosquitoes (Aedes triseriatus) and Stemflow on Microbial Community Dynamics in Container Habitats

The dynamics of the microbial food sources for Aedes triseriatus larvae in microcosms were found to be strongly influenced by larval presence. The total abundance of bacteria in water samples generally increased in response to larvae, including populations of cultivable, facultatively anaerobic bacteria. Additionally, a portion of the community shifted from Pseudomonaceae to Enterobacteriaceae. Bacterial abundance on leaf material was significantly reduced in the presence of actively feeding larvae. Principle-component analysis of whole community fatty acid methyl ester (FAME) profiles showed that larvae changed the microbial community structure in both the water column and the leaf material. Cyclopropyl FAMEs, typically associated with bacteria, were reduced in microcosms containing larvae; however, other bacterial fatty acids showed no consistent response. Long-chain polyunsaturated fatty acids characteristic of microeukaryotes (protozoans and meiofauna) declined in abundance when larvae were present, indicating that larval feeding reduced the densities of these microorganisms. However, presumed fungal lipid markers either increased or were unchanged in response to larvae. Larval presence also affected microbial nitrogen metabolism through modification of the physiochemical conditions or by grazing on populations of bacteria involved in nitrification-denitrification. Stemflow primarily influenced inorganic ion and organic compound concentrations in the microcosms and had less-pronounced effects on microbial community parameters than did larval presence. Stemflow treatments diluted concentrations of all inorganic ions (chloride, sulfate, and ammonium) and organic compounds (total dissolved organic carbon, soluble carbohydrates, and total protein) measured, with the exceptions of nitrite and nitrate. Stemflow addition did not measurably affect larval biomass in the microcosms but did enhance development rates and early emergence patterns of adults.     

Hydrophobic interactions within biofilms of nitrifying and denitrifying bacteria in biofilters

Hydrophobicity of the solid surface and microbial cell surface is important factor for the development of biofilms applied in bioengineering systems. An adsorption of phenanthrene was used for analysis of the hydrophobicity of support fibers and bacterial cell surfaces within the biofilter of wastewater. The adsorption of phenanthrene was measured by synchronous fluorescence spectrometry. Cell surface hydrophobicity does not depend on the fixation procedure, pH of microbial suspension, and has no clear correlation with an adherence of the cells to hexadecane droplets. Notwithstanding high hydrophobicity of bacterial cells, the hydrophobicity of intact biofilm is determined by the hydrophobicity of the support fibers. New indexes were proposed to evaluate the reactor performance related with hydrophobic interactions within the biofilm. These indexes showed that significant share of hydrophobic sites within the nitrifying biofilm is protected from the hydrophobic interactions between the cells and environment.     

Carcinoembryonic antigen (CEA) and CEA-related cell adhesion molecule 1 (CEACAM1), apically expressed on human colonic M cells,are potential receptors for microbial adhesion

In the human gut mucosa, specialized M cells deliver intact foreign macromolecules and commensal bacteria from the lumen to organized mucosal lymphoid tissues triggering immune responses. M cells are also major sites of adhesion and invasion for enteric pathogens. The molecular features of M cell apical surfaces that promote microbial normal attachment are still largely unknown. We have demonstrated previously that in the human colonic epithelium, carcinoembryonic antigen (CEA) and CEA-related cell adhesion molecule 1 (CEACAM1) are integral components of the apical glycocalyx which participate in epithelial–microbial interactions. In this study, based on the reactivity of specific monoclonal antibodies and on immunoelectron microscopy, we show that M cells of human colonic solitary lymphoid follicles express CEA and CEACAM1 on the apical surface. Recently these highly glycosylated molecules have been characterized as protein receptors for different bacteria. This leads us to propose a role for CEA and CEACAM1 in the adherence of enteric bacteria to the apical membrane of colonic M cells. We also hypothesize that, unlike colonic enterocytes, M cells lack the defense mechanism that eliminates CEA and CEACAM1 upon microbial binding and which is based on vesiculation of microvillus plasma membrane.