Bioproduction of phenylethanoid glycosides by plant cell culture of Scrophularia striata Boiss.: from shake-flasks to bioreactor

Phenylethanoid glycosides (PeG) are a class of polyphenols found in some plants that have pharmaceutical effects as anti-inflammatories and anti-oxidants. The presence of PeG (acteoside) in the aerial parts of Scrophularia striata Boiss. has been demonstrated. Considerable progress has been made using plant cell cultures to stimulate formation and accumulation of secondary metabolites. The present study optimized phenylethanoid production from shake flasks to bioreactor using a cell culture of S. striata. The optimal conditions for production of cell biomass by scale-up to a bioreactor were determined to be a pH of 4.8, air flow rate of 0.5–1.5 l min⁻¹, and mixing speed of 110–170 rpm at 25 ± 1 °C in darkness. Growth parameters and PeG production were measured and compared with the results from the shake flasks. The results showed that cell biomass was high in the bioreactor (15.64 g l⁻¹ DW) and in the shake flasks (14.16 g l⁻¹ DW). The acteoside content in the bioreactor was 1404.20 μg g⁻¹ DW, which is threefold higher than in the shake flasks (459.71 μg g⁻¹ DW). The echinacoside concentration in the bioreactor was 1449.39 μg g⁻¹, 1.36-fold lower than in the shake flasks (1973.03 μg g⁻¹ DW). This study established an efficient way for production of acteoside, the major PeG, in a bioreactor.

     

Fermentative production of succinic acid from straw hydrolysate by Actinobacillus succinogenes

In this work, straw hydrolysates were used to produce succinic acid by Actinobacillus succinogenes CGMCC1593 for the first time. Results indicated that both glucose and xylose in the straw hydrolysates were utilized in succinic acid production, and the hydrolysates of corn straw was better than that of rice or wheat straw in anaerobic fermentation of succinic acid. However, cell growth and succinic acid production were inhibited when the initial concentration of sugar, which was from corn straw hydrolysate (CSH), was higher than 60 g l^?1. In batch fermentation, 45.5 g l^?1 succinic acid concentration and 80.7% yield were attained after 48 h incubation with 58 g l^?1 of initial sugar from corn straw hydrolysate in a 5-l stirred bioreactor. While in fed-batch fermentation, concentration of succinic acid achieved 53.2 g l^?1 at a rate of 1.21 g l^?1 h^?1 after 44 h of fermentation. Our work suggested that corn straw could be utilized for the economical production of succinic acid by A. succinogenes.     

Butyric acid fermentation in a fibrous bed bioreactor with immobilized Clostridium tyrobutyricum from cane molasses

Butyrate fermentation by immobilized Clostridium tyrobutyricum was successfully carried out in a fibrous bed bioreactor using cane molasses. Batch fermentations were conducted to investigate the influence of pH on the metabolism of the strain, and the results showed that the fermentation gave a highest butyrate production of 26.2 g l⁻¹ with yield of 0.47 g g⁻¹ and reactor productivity up to 4.13 g l⁻¹ h⁻¹ at pH 6.0. When repeated-batch fermentation was carried out, long-term operation with high butyrate yield, volumetric productivity was achieved. Several cane molasses pretreatment techniques were investigated, and it was found that sulfuric acid treatment gave better results regarding butyrate concentration (34.6 ± 0.8 g l⁻¹), yield (0.58 ± 0.01 g g⁻¹), and sugar utilization (90.8 ± 0.9%). Also, fed-batch fermentation from cane molasses pretreated with sulfuric acid was performed to further increase the concentration of butyrate up to 55.2 g l⁻¹.     

1,3-Propanediol production in a two-step process fermentation from renewable feedstock

In this work, the production of 1,3-propanediol from glucose and molasses was studied in a two-step process using two recombinant microorganisms. The first step of the process is the conversion of glucose or other sugar into glycerol by the metabolic engineered Saccharomyces cerevisiae strain HC42 adapted to high (>200 g l⁻¹) glucose concentrations. The second step, carried out in the same bioreactor, was performed by the engineered strain Clostridium acetobutylicum DG1 (pSPD5) that converts glycerol to 1,3-propanediol. This two-step strategy led to a flexible process, resulting in a 1,3-propanediol production and yield that depended on the initial sugar concentration. Below 56.2 g l⁻¹ of sugar concentration, cultivation on molasses or glucose showed no significant differences. However, at higher molasses concentrations, glycerol initially produced by yeast could not be totally converted into 1,3-propanediol by C. acetobutylicum and a lower 1,3-propanediol overall yield was observed. In our hand, the best results were obtained with an initial glucose concentration of 103 g l⁻¹, leading to a final 1,3-propanediol concentration of 25.5 g l⁻¹, a productivity of 0.16 g l⁻¹ h⁻¹ and 1,3-propanediol yields of 0.56 g g⁻¹ glycerol and 0.24 g g⁻¹ sugar, which is the highest value reported for a two-step process. For an initial sugar concentration (from molasses) of 56.2 g l⁻¹, 27.4 g l⁻¹ of glycerol were produced, leading to 14.6 g l⁻¹ of 1.3-propanediol and similar values of productivity, 0.15 g l⁻¹ h⁻¹, and overall yield, 0.26 g g⁻¹ sugar.     

Propionic acid fermentation by Propionibacterium freudenreichii CCTCC M207015 in a multi-point fibrous-bed bioreactor

Propionic acid was produced in a multi-point fibrous-bed (MFB) bioreactor by Propionibacterium freudenreichii CCTCC M207015. The MFB bioreactor, comprising spiral cotton fiber packed in a modified 7.5-l bioreactor, was effective for cell-immobilized propionic acid production compared with conventional free cell fermentation. Batch fermentations at various glucose concentrations were investigated in the MFB bioreactor. Based on analysis of the time course of production, a fed-batch strategy was applied for propionic acid production. The maximum propionic acid concentration was 67.05 g l⁻¹ after 496 h of fermentation, and the proportion of propionic acid to total organic acids was approximately 78.28% (w/w). The MFB bioreactor exhibited excellent production stability during batch fermentation and the propionic acid productivity remained high after 78 days of fermentation.     

Production of ectoine through a combined process that uses both growing and resting cells of <Emphasis Type="Italic">Halomonas salina</Emphasis> DSM 5928<Superscript>T</Superscript>

Using ectoine-excreting strain Halomonas salina DSM 5928^T, we developed a new process for high-efficiency production of ectoine, which involved a combined process of batch fermentation by growing cells and production by resting cells. In the first stage, batch fermentation was carried out using growing cells under optimal fermentation conditions. The second stage was the production phase, in which ectoine was synthesized and excreted by phosphate-limited resting cells. Optimal conditions for synthesis and excretion of ectoine during batch fermentation in a 10 l fermentor were 0.5 mol l⁻¹ NaCl and an initial monosodium glutamate concentration of 80 g l⁻¹ respectively. The pH was adjusted to 7.0 and the temperature was maintained at 33°C. In phosphate-limited resting cells medium, monosodium glutamate and NaCl concentration was 200 g l⁻¹ and 0.5 mol l⁻¹, respectively, as well as pH was 7.0. The total concentration of ectoine produced was 14.86 g l⁻¹, the productivity and yield of ectoine was 7.75 g l⁻¹ day⁻¹ and 0.14 g g⁻¹, respectively, and the percentage of ectoine excreted was 79%. These levels of ectoine production and excretion are the highest reported to date.     

<Emphasis Type="Italic">Clostridium beijerinckii</Emphasis> mutant with high inhibitor tolerance obtained by low-energy ion implantation

Clostridium beijerinckii mutant strain IB4, which has a high level of inhibitor tolerance, was screened by low-energy ion implantation and used for butanol fermentation from a non-detoxified hemicellulosic hydrolysate of corn fiber treated with dilute sulfuric acid (SAHHC). Evaluation of toxicity showed C. beijerinckii IB4 had a higher level of tolerance than parent strain C. beijerinckii NCIMB 8052 for five out of six phenolic compounds tested (the exception was vanillin). Using glucose as carbon source, C. beijerinckii IB4 produced 9.1 g l⁻¹ of butanol with an acetone/butanol/ethanol (ABE) yield of 0.41 g g⁻¹. When non-detoxified SAHHC was used as carbon source, C. beijerinckii NCIMB 8052 grew well but ABE production was inhibited. By contrast, C. beijerinckii IB4 produced 9.5 g l⁻¹ of ABE with a yield of 0.34 g g⁻¹, including 2.2 g l⁻¹ acetone, 6.8 g l⁻¹ butanol, and 0.5 g l⁻¹ ethanol. The remarkable fermentation and inhibitor tolerance of C. beijerinckii IB4 appears promising for ABE production from lignocellulosic materials.     

Continuous butanol production with reduced byproducts formation from glycerol by a hyper producing mutant of <Emphasis Type="Italic">Clostridium pasteurianum</Emphasis>

Butanol, a four-carbon primary alcohol (C₄H₁₀O), is an important industrial chemical and has a good potential to be used as a superior biofuel. Bio-based production of butanol from renewable feedstock is a promising and sustainable alternative to substitute petroleum-based fuels. Here, we report the development of a process for butanol production from glycerol, which is abundantly available as a byproduct of biodiesel production. First, a hyper butanol producing strain of Clostridium pasteurianum was isolated by chemical mutagenesis. The best mutant strain, C. pasteurianum MBEL_GLY2, was able to produce 10.8 g l⁻¹ butanol from 80 g l⁻¹ glycerol as compared to 7.6 g l⁻¹ butanol produced by the parent strain. Next, the process parameters were optimized to maximize butanol production from glycerol. Under the optimized batch condition, the butanol concentration, yield, and productivity of 17.8 g l⁻¹, 0.30 g g⁻¹, and 0.43 g l⁻¹ h⁻¹ could be achieved. Finally, continuous fermentation of C. pasteurianum MBEL_GLY2 with cell recycling was carried out using glycerol as a major carbon source at several different dilution rates. The continuous fermentation was run for 710 h without strain degeneration. The acetone–butanol–ethanol productivity and the butanol productivity of 8.3 and 7.8 g l⁻¹ h⁻¹, respectively, could be achieved at the dilution rate of 0.9 h⁻¹. This study reports continuous production of butanol with reduced byproducts formation from glycerol using C. pasteurianum, and thus could help design a bioprocess for the improved production of butanol.     

Glycerol/Glucose Co-Fermentation: One More Proficient Process to Produce Propionic Acid by <Emphasis Type="Italic">Propionibacterium acidipropionici</Emphasis>

Cosubstrates fermentation is such an effective strategy for increasing subject metabolic products that it could be available and studied in propionic acid production, using glycerol and glucose as carbon resources. The effects of glycerol, glucose, and their mixtures on the propionic acid production by Propionibacterium acidipropionici CGMCC1.2225 (ATCC4965) were studied, with the aim of improving the efficiency of propionic acid production. The propionic acid yield from substrate was improved from 0.475 and 0.303 g g⁻¹ with glycerol and glucose alone, respectively, to 0.572 g g⁻¹ with co-fermentation of a glycerol/glucose mixture of 4/1 (mol/mol). The maximal propionic acid and substrate conversion rate were 21.9 g l⁻¹ and 57.2% (w/w), respectively, both significantly higher than for a sole carbon source. Under optimized conditions of fed-batch fermentation, the maximal propionic acid yield and substrate conversion efficiency were 29.2 g l⁻¹ and 54.4% (w/w), respectively. These results showed that glycerol/glucose co-fermentation could serve as an excellent alternative to conventional propionic acid fermentation.     

A C6/C5 co‐fermenting Saccharomyces cerevisiae strain with the alleviation of antagonism between xylose utilization and robustness

During second‐generation bioethanol production from lignocellulosic biomass, the desired traits for fermenting microorganisms, such as Saccharomyces cerevisiae, are high xylose utilization and high robustness to inhibitors in lignocellulosic hydrolysates. However, as observed previously, these two traits easily showed the antagonism, one rising and the other falling, in the C6/C5 co‐fermenting S. cerevisiae strain. In this study, LF1 obtained in our previous study is an engineered budding yeast strain with a superior co‐fermentation capacity of glucose and xylose, and was then mutated by atmospheric and room temperature plasma (ARTP) mutagenesis to improve its robustness. The ARTP‐treated cells were grown in 50% (v/v) leachate from lignocellulose pretreatment with high inhibitors content for adaptive evolution. After 30 days, the generated mutant LF1‐6 showed significantly enhanced tolerance, with a six‐fold increase in cell density in the above leachate. Unfortunately, its xylose utilization dropped markedly, indicating the recurrence of the negative correlation between xylose utilization and robustness. To alleviate this antagonism, LF1‐6 cells were iteratively mutated with ARTP mutagenesis and then anaerobically grown using xylose as the sole carbon source, and xylose utilization was restored in the resulting strain 6M‐15. 6M‐15 also exhibited increased co‐fermentation performance of xylose and glucose with the highest ethanol productivity reported to date (0.525 g g^?1 h^?1) in high‐level mixed sugars (80 g L^?1 glucose and 40 g L^?1 xylose) with no inhibitors. Meanwhile, its fermentation time was shortened by 8 h compared to that of LF1. During the fermentation of non‐detoxified lignocellulosic hydrolysate with high inhibitor concentrations at pH ~3.5, 6M‐15 can efficiently convert glucose and xylose with an ethanol yield of 0.43 g g^?1. 6M‐15 is also regarded as a potential chassis cell for further design of a customized strain suitable for production of second‐generation bioethanol or other high value‐added products from lignocellulosic biomass.     

Production of <Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine from glycerol by a recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

The production of l-phenylalanine is conventionally carried out by fermentations that use glucose or sucrose as the carbon source. This work reports on the use of glycerol as an inexpensive and abundant sole carbon source for producing l-phenylalanine using the genetically modified bacterium Escherichia coli BL21(DE3). Fermentations were carried out at 37°C, pH 7.4, using a defined medium in a stirred tank bioreactor at various intensities of impeller agitation speeds (300–500 rpm corresponding to 0.97–1.62 m s⁻¹ impeller tip speed) and aeration rates (2–8 L min⁻¹, or 1–4 vvm). This highly aerobic fermentation required a good supply of oxygen, but intense agitation (impeller tip speed ~1.62 m s⁻¹) reduced the biomass and l-phenylalanine productivity, possibly because of shear sensitivity of the recombinant bacterium. Production of l-phenylalanine was apparently strongly associated with growth. Under the best operating conditions (1.30 m s⁻¹ impeller tip speed, 4 vvm aeration rate), the yield of l-phenylalanine on glycerol was 0.58 g g⁻¹, or more than twice the best yield attainable on sucrose (0.25 g g⁻¹). In the best case, the peak concentration of l-phenylalanine was 5.6 g L⁻¹, or comparable to values attained in batch fermentations that use glucose or sucrose. The use of glycerol for the commercial production of l-phenylalanine with E. coli BL21(DE3) has the potential to substantially reduce the cost of production compared to sucrose- and glucose-based fermentations.     

Lactic acid production by Lactobacillus sp. RKY2 in a cell-recycle continuous fermentation using lignocellulosic hydrolyzates as inexpensive raw materials

Continuous lactic acid fermentations were conducted using lignocellulosic hydrolyzates and corn steep liquor as inexpensive raw materials. Lactic acid concentrations decreased with increases in the dilution rate, whereas the residual substrate concentrations increased. However, lactic acid yields were maintained at more than 0.90 g g⁻¹ over all cases experimented. The cell-recycle cultivation system exerted positive effects on fermentation efficiency, including volumetric productivity, which is attributable to the retention of cells in the bioreactor. The cell-recycle continuous fermentation of lignocellulosic hydrolyzates yielded a lactic acid productivity of 6.7 g l⁻¹ h⁻¹ for a dilution rate of 0.16 h⁻¹ using 30 g l⁻¹ of corn steep liquor and 1.5 g l⁻¹ of yeast extract as nutrients. The productivity (6.7 g l⁻¹ h⁻¹) acquired by the cell-recycle continuous fermentation of lignocellulosic hydrolyzates was 1.6 times higher than the lactic acid productivity yielded in the continuous fermentation without cell-recycle system.     

Improved β-carotene production of Rhodotorula glutinis in fermented radish brine by continuous cultivation

Fermentation kinetics of growth and β-carotene production by Rhodotorula glutinis DM28 in batch and continuous cultures using fermented radish brine, a waste generated from fermented vegetable industry, as a cultivation medium were investigated. The suitable brine concentration for β-carotene production by R. glutinis DM28 was 30 g l^?1. Its growth and β-carotene production obtained by batch culture in shake flasks were 2.2 g l^?1 and 87 μg l^?1, respectively, while, in a bioreactor were 2.6 g l^?1 and 186 μg l^?1, respectively. Furthermore, its maximum growth rate and β-carotene productivity in continuous culture obtained at the dilution rate of 0.24 h^?1 were 0.3 g l^?1 h^?1 and 19 μg l^?1 h^?1, respectively, which were significantly higher than those in the batch. Therefore, improved growth rate and β-carotene productivity of R. glutinis in fermented radish brine could be accomplished by continuous cultivation.     

Carbon source pulsed feeding to attain high yield and high productivity in poly(3-hydroxybutyrate) (PHB) production from soybean oil using <Emphasis Type="Italic">Cupriavidus necator</Emphasis>

Poly(3-hydroxybutyrate) (PHB) biosynthesis from soybean oil by Cupriavidus necator was studied using a bench scale bioreactor. The highest cell concentration (83 g l⁻¹) was achieved using soybean oil at 40 g l⁻¹ and a pulse of the same concentration. The PHB content was 81% (w/w), PHB productivity was 2.5 g l⁻¹ h⁻¹, and the calculated Y_p/s value was 0.85 g g⁻¹. Growth limitation and the onset of PHB biosynthesis took place due to exhaustion of P, and probably also Cu, Ca, and Fe.     

Factors affecting the production of <Emphasis Type="SmallCaps">l</Emphasis>-xylulose by resting cells of recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

Factors affecting the production of the rare sugar l-xylulose from xylitol using resting cells were investigated. An E. coli BPT228 strain that recombinantly expresses a gene for xylitol dehydrogenase was used in the experiments. The ratio of xylitol to l-xylulose was three times lower in the cytoplasm than in the medium. The effects of pH, temperature, shaking speed, and initial xylitol concentration on l-xylulose production were investigated in shaking flasks using statistical experimental design methods. The highest production rates were found at high shaking speed and at high temperature (over 44°C). The optimal pH for both productivity and conversion was between 7.5 and 8.0, and the optimal xylitol concentration was in the range 250–350 g l⁻¹. A specific productivity of 1.09 ± 0.10 g g⁻¹ h⁻¹ was achieved in a bioreactor. The response surface model based on the data from the shake flask experiments predicted the operation of the process in a bioreactor with reasonable accuracy.     

Production of tetramethylpyrazine by batch culture of <Emphasis Type="Italic">Bacillus subtilis</Emphasis> with optimal pH control strategy

The effects of initial culture pH ranging from 5.0 to 7.5 on biomass content, precursor 3-hydroxy-2-butanone (HB) accumulation, and 2,3,5,6-tetramethylpyrazine (TTMP) formation by Bacillus subtilis CCTCC M 208157 were investigated in shake flask fermentation. Weak acidic conditions were found to favor cell growth and precursor HB accumulation, while TTMP could be synthesized more efficiently in conditions with initial pH towards neutrality. Batch bioprocess of TTMP fermentation by Bacillus subtilis CCTCC M 208157 at various controlled pH values ranging from 5.5 to 7.0 was then examined in 7.5-l fermentor. The results suggested that optimum pH for cell growth and precursor HB accumulation was 5.5 with maximum cell growth rate (Q _x) and precursor HB accumulation rate (Q _HB) of 0.833 g l⁻¹ h⁻¹ and 1.118 g l⁻¹ h⁻¹, respectively, while optimum pH for TTMP formation was 7.0 with maximum TTMP formation rate (Q _TTMP) of 0.095 g l⁻¹ h⁻¹. A pH-shifted strategy was accordingly developed to improve TTMP production in bioreactor fermentation by shifting the culture pH from 5.5 to 7.0 after 48 h of cultivation. By applying the strategy, final TTMP concentration of 7.43 g l⁻¹ was obtained, being 22.2% greater than that of constant-pH fermentation.     

Nisin production of Lactococcus lactis N8 with hemin‐stimulated cell respiration in fed‐batch fermentation system

In this study, nisin production of Lactococcus lactis N8 was optimized by independent variables of glucose, hemin and oxygen concentrations in fed‐batch fermentation in which respiration of cells was stimulated with hemin. Response surface model was able to explain the changes of the nisin production of L. lactis N8 in fed‐batch fermentation system with high fidelity (R² 98%) and insignificant lack of fit. Accordingly, the equation developed indicated the optimum parameters for glucose, hemin, and dissolved oxygen were 8 g L^?1 h^?1, 3 μg mL^?1 and 40%, respectively. While 1711 IU mL^?1 nisin was produced by L. lactis N8 in control fed‐batch fermentation, 5410 IU mL^?1 nisin production was achieved within the relevant optimum parameters where the respiration of cell was stimulated with hemin. Accordingly, nisin production was enhanced 3.1 fold in fed‐batch fermentation using hemin. In conclusion the nisin production of L. lactis N8 was enhanced extensively as a result of increasing the biomass by stimulating the cell respiration with adding the hemin in the fed‐batch fermentation. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:678–685, 2015     

Homo-fermentative production of d-lactic acid by Lactobacillus sp. employing casein whey permeate as a raw feed-stock

Casein whey permeate (CWP), a lactose-enriched dairy waste effluent, is a viable feed stock for the production of value-added products. Two lactic acid bacteria were cultivated in a synthetic casein whey permeate medium with or without pH control. Lactobacillus lactis ATCC 4797 produced d-lactic acid (DLA) at 12.5 g l^?1 in a bioreactor. The values of Leudking–Piret model parameters suggested that lactate was a growth-associated product. Batch fermentation was also performed employing CWP (35 g lactose l^?1) with casein hydrolysate as a nitrogen supplement in a bioreactor. After 40 h, L. lactis produced 24.3 g lactic acid l^?1 with an optical purity >98 %. Thus CWP may be regarded as a potential feed-stock for DLA production.     

Ethanol and xylitol production from glucose and xylose at high temperature by <Emphasis Type="Italic">Kluyveromyces</Emphasis> sp. IIPE453

A yeast strain Kluyveromyces sp. IIPE453 (MTCC 5314), isolated from soil samples collected from dumping sites of crushed sugarcane bagasse in Sugar Mill, showed growth and fermentation efficiency at high temperatures ranging from 45°C to 50°C. The yeast strain was able to use a wide range of substrates, such as glucose, xylose, mannose, galactose, arabinose, sucrose, and cellobiose, either for growth or fermentation to ethanol. The strain also showed xylitol production from xylose. In batch fermentation, the strain showed maximum ethanol concentration of 82 ± 0.5 g l⁻¹ (10.4% v/v) on initial glucose concentration of 200 g l⁻¹, and ethanol concentration of 1.75 ± 0.05 g l⁻¹ as well as xylitol concentration of 11.5 ± 0.4 g l⁻¹ on initial xylose concentration of 20 g l⁻¹ at 50°C. The strain was capable of simultaneously using glucose and xylose in a mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹, achieving maximum ethanol concentration of 38 ± 0.5 g l⁻¹ and xylitol concentration of 14.5 ± 0.2 g l⁻¹ in batch fermentation. High stability of the strain was observed in a continuous fermentation by feeding the mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹ by recycling the cells, achieving maximum ethanol concentration of 30.8 ± 6.2 g l⁻¹ and xylitol concentration of 7.35 ± 3.3 g l⁻¹ with ethanol productivity of 3.1 ± 0.6 g l⁻¹ h⁻¹ and xylitol productivity of 0.75 ± 0.35 g l⁻¹ h⁻¹, respectively.     

Fungal autolysate as a nutrient supplement for ethanol and chitosan production by <Emphasis Type="Italic">Mucor indicus</Emphasis>

Mucor indicus can be used to produce ethanol from a variety of sugars, including pentose’s. An extract of it, produced by autolysis, could replace yeast extract in culture medium with improved production of ethanol. At 10 g l⁻¹, the extract gave a higher ethanol yield (0.47 g g⁻¹) and productivity (0.71 g l⁻¹ h⁻¹) compared to medium containing yeast extract (yield 0.45 g g⁻¹; productivity 0.67 g l⁻¹ h⁻¹).