Detection of Clostridium tyrobutyricum spores using polyclonal antibodies and flow cytometry

Aims: The present work investigates the feasibility of using flow cytometry (FCM) combined with fluorescent‐labelled specific polyclonal antibodies for the detection and presumptive identification of Clostridium tyrobutyricum spores in bovine milk. Methods and Results: Two fluorescent molecules (fluorescein isothiocyanate and Alexa Fluor 488) were conjugated to antispores polyclonal antibodies. Side scatter and forward scatter profiles of the Cl. tyrobutyricum spores marked with fluorescent antibodies permitted the detection of spores and differentiated them from other related microbial species. The detection limit of this method was 10³ spores per 100 ml of milk, and results could be achieved in 2 h. Conclusions: FCM combined with fluorochrome‐conjugated antibodies, especially Alexa Fluor, could be an efficacious means to detect and provide presumptive identification of Cl. tyrobutyricum spores, as well as differentiation from other Clostridium species that can also cause late blowing in cheese. Significance and Impact of the Study: This study describes the basis for the development of a method suitable for analysis of milk destined for cheese manufacture that would permit the detection of Cl. tyrobutyricum spores in a short period. This would enable the industry to use contaminated milk for dairy products other than cheese where Cl. tyrobutyricum does not cause a problem.     

Domain shuffling and module engineering of Listeria phage endolysins for enhanced lytic activity and binding affinity

Bacteriophage endolysins are peptidoglycan hydrolases employed by the virus to lyse the host at the end of its multiplication phase. They have found many uses in biotechnology; not only as antimicrobials, but also for the development of novel diagnostic tools for rapid detection of pathogenic bacteria. These enzymes generally show a modular organization, consisting of N‐terminal enzymatically active domains (EADs) and C‐terminal cell wall‐binding domains (CBDs) which specifically target the enzymes to their substrate in the bacterial cell envelope. In this work, we used individual functional modules of Listeria phage endolysins to create fusion proteins with novel and optimized properties for labelling and lysis of Listeria cells. Chimaeras consisting of individual EAD and CBD modules from PlyPSA and Ply118 endolysins with different binding specificity and catalytic activity showed swapped properties. EAD118–CBDPSA fusion proteins exhibited up to threefold higher lytic activity than the parental endolysins. Recombineering different CBD domains targeting various Listeria cell surfaces into novel heterologous tandem proteins provided them with extended recognition and binding properties, as demonstrated by fluorescent GFP‐tagged CBD fusions. It was also possible to combine the binding specificities of different single CBDs in heterologous tandem CBD constructs such as CBD500‐P35 and CBDP35‐500, which were then able to recognize the majority of Listeria strains. Duplication of CBD500 increased the equilibrium cell wall binding affinity by approximately 50‐fold, and the enzyme featuring tandem CBD modules showed increased activity at higher ionic strength. Our results demonstrate that modular engineering of endolysins is a powerful approach for the rational design and optimization of desired functional properties of these proteins.     

Selection of high affine peptide ligands for detection of Clostridium Tyrobutyricum spores

Clostridium tyrobutyricum is the main agent responsible for “late blowing” in cheese, which causes severe economic losses. Nowadays, the reference method for its detection is the Most-Probable-Number (MPN), however, is time consuming and non-specific. Thus, in order to check milk contamination with spores of C. tyrobutyricum, a more specific and rapid method would be required. The objective of this work was to obtain a ligand to establish the basis to develop a biomagnetic separation method for detection of C. tyrobutyricum spores. This study describes the selection of thirteen highly affine peptides to C. tyrobutyricum spores from a phage-display peptide library. In order to test the ability of the peptides attached to a solid support to bind the spores, the most frequent peptide was synthesised and used to coat paramagnetic beads.     

Development and Validation of PCR Primers To Assess the Diversity of Clostridium spp. in Cheese by Temporal Temperature Gradient Gel Electrophoresis

A nested-PCR temporal temperature gradient gel electrophoresis (TTGE) approach was developed for the detection of bacteria belonging to phylogenetic cluster I of the genus Clostridium (the largest clostridial group, which represents 25% of the currently cultured clostridial species) in cheese suspected of late blowing. Primers were designed based on the 16S rRNA gene sequence, and the specificity was confirmed in PCRs performed with DNAs from cluster I and non-cluster I species as the templates. TTGE profiles of the PCR products, comprising the V5-V6 region of the 16S rRNA gene, allowed us to distinguish the majority of cluster I species. PCR-TTGE was applied to analyze commercial cheeses with defects. All cheeses gave a signal after nested PCR, and on the basis of band comigration with TTGE profiles of reference strains, all the bands could be assigned to a clostridial species. The direct identification of Clostridium spp. was confirmed by sequencing of excised bands. C. tyrobutyricum and C. beijerinckii contaminated 15 and 14 of the 20 cheese samples tested, respectively, and C. butyricum and C. sporogenes were detected in one cheese sample. Most-probable-number counts and volatile fatty acid were determined for comparison purposes. Results obtained were in agreement, but only two species, C. tyrobutyricum and C. sporogenes, could be isolated by the plating method. In all cheeses with a high amount of butyric acid (>100 mg/100 g), the presence of C. tyrobutyricum DNA was confirmed by PCR-TTGE, suggesting the involvement of this species in butyric acid fermentation. These results demonstrated the efficacy of the PCR-TTGE method to identify Clostridium in cheeses. The sensitivity of the method was estimated to be 100 CFU/g.     

Diversity of spore‐forming bacteria in cattle manure,slaughterhouse waste and samples from biogas plants

Aims: As biowaste intended for biogas production can contain pathogenic micro‐organisms, the recommended treatment is pasteurization at 70°C for 60 min. This reduces pathogens such as Salmonella spp., whereas spore‐forming bacteria (Bacillus spp. and Clostridium spp.) survive. Most spore‐forming bacteria are harmless, but some can cause diseases such as blackleg, botulism and anthrax. In this study, the effect of the biogas process on Bacillus spp. and Clostridium spp. was investigated. Methods and Results: We analysed 97 faecal samples, 20 slaughterhouse waste samples and 60 samples collected at different stages in the biogas process. Bacillus spp. and Clostridium spp. were quantified and subcultured. The isolates were identified by biochemical methods and by 16S rRNA gene sequencing. Phylogenetic trees were constructed from the sequences obtained from isolates from the samples. Clostridium botulinum/Clostridium spp. and Clostridium sordellii were found both before and after pasteurization, but not after digestion (AD). Some of the isolated strains probably represented new members of the genera Clostridium and Bacillus. Conclusion: After digestion, the numbers of clostridia decreased, but none of the pathogenic bacteria did, whereas Bacillus spp. remained constant during the process. Significance and Impact of the Study: Biogas is gaining in importance as an energy source and because the residues are used as fertilizers, we needed to study the prevalence of pathogenic bacteria in such material.     

Quantitative Detection of Clostridium tyrobutyricum in Milk by Real-Time PCR

We developed a real-time PCR assay for the quantitative detection of Clostridium tyrobutyricum, which has been identified as the major causal agent of late blowing in cheese. The assay was 100% specific, with an analytical sensitivity of 1 genome equivalent in 40% of the reactions. The quantification was linear (R² > 0.9995) over a 5-log dynamic range, down to 10 genome equivalents, with a PCR efficiency of >0.946. With optimized detergent treatment and enzymatic pretreatment of the sample before centrifugation and nucleic acid extraction, the assay counted down to 300 C. tyrobutyricum spores, with a relative accuracy of 82.98 to 107.68, and detected as few as 25 spores in 25 ml of artificially contaminated raw or ultrahigh-temperature-treated whole milk.     

Immobilization of Lactococcus lactis to cellulosic material by cellulose‐binding domain of Cellvibrio japonicus

Aims: Immobilization of whole cells can be used to accumulate cells in a bioreactor and thus increase the cell density and potentially productivity, also. Cellulose is an excellent matrix for immobilization purposes because it does not require chemical modifications and is commercially available in many different forms at low price. The aim of this study was to construct a Lactococcus lactis strain capable of immobilizing to a cellulosic matrix. Methods and Results: In this study, the Usp45 signal sequence fused with the cellulose‐binding domain (CBD) (112 amino acids) of XylA enzyme from Cellvibrio japonicus was fused with PrtP or AcmA anchors derived from L. lactis. A successful surface display of L. lactis cells expressing these fusion proteins under the P45 promoter was achieved and detected by whole‐cell ELISA. A rapid filter paper assay was developed to study the cellulose‐binding capability of these recombinant strains. As a result, an efficient immobilization to filter paper was demonstrated for the L. lactis cells expressing the CBD‐fusion protein. The highest immobilization (92%) was measured for the strain expressing the CBD in fusion with the 344 amino acid PrtP anchor. Conclusions: The result from the binding tests indicated that a new phenotype for L. lactis with cellulose‐binding capability was achieved with both PrtP (LPXTG type anchor) and AcmA (LysM type anchor) fusions with CBD. Significance and Impact of the Study: We demonstrated that an efficient immobilization of recombinant L. lactis cells to cellulosic matrix is possible. This is a step forward in developing efficient immobilization systems for lactococcal strains for industrial‐scale fermentations.     

Correlation between signal input and output in PctA and PctB amino acid chemoreceptor of Pseudomonas aeruginosa

The PctA and PctB chemoreceptors of Pseudomonas aeruginosa mediate chemotaxis toward amino acids. A general feature of signal transduction processes is that a signal input is converted into an output. We have generated chimeras combining the Tar signaling domain with either the PctA or PctB ligand binding domain (LBD). Escherichia coli harboring either PctA‐Tar or PctB‐Tar mediated chemotaxis toward amino acids. The responses of both chimeras were determined using fluorescence resonance energy transfer, and the derived EC₅₀ values are a measure of output. PctA‐Tar and PctB‐Tar responded to 19 and 11 L‐amino acids respectively. The EC₅₀ values of PctA‐Tar responses differed by more than three orders of magnitude, whereas PctB‐Tar responded preferentially to L‐Gln. The comparison of amino acid binding constants and the corresponding EC₅₀ values for both receptors revealed statistically significant correlations between inputs and outputs. PctA and PctB possess a double PDC (PhoQ‐DcuS‐CitA) LBD – a family of binding domain found in various other amino acid chemoreceptors. Similarly, various chemoreceptors share the preferential response to certain amino acids (e.g. L‐Cys, L‐Ser and L‐Thr) that we observed for PctA. Defining the specific inputs and outputs of these chemoreceptors is an important step toward better understanding of their physiological role.     

Binding of calcium is sensed structurally and dynamically throughout the second calcium‐binding domain of the sodium/calcium exchanger

We report the effects of Ca²⁺ binding on the backbone relaxation rates and chemical shifts of the AD and BD splice variants of the second Ca²⁺‐binding domain (CBD2) of the sodium–calcium exchanger. Analysis of the Ca²⁺‐induced chemical shifts perturbations yields similar K_D values of 16–24 μM for the two CBD2‐AD Ca²⁺‐binding sites, and significant effects are observed up to 20 Å away. To quantify the Ca²⁺‐induced chemical shift changes, we performed a comparative analysis of eight Ca²⁺‐binding proteins that revealed large differences between different protein folds. The CBD2 ¹⁵N relaxation data show the CBD2‐AD Ca²⁺ coordinating loops to be more rigid in the Ca²⁺‐bound state as well as to affect the FG‐loop located at the opposite site of the domain. The equivalent loops of the CBD2‐BD splice variant do not bind Ca²⁺ and are much more dynamic relative to both the Ca²⁺‐bound and apo forms of CBD2‐AD. A more structured FG‐loop in CBD2‐BD is suggested by increased S² order parameter values relative to both forms of CBD2‐AD. The chemical shift and relaxation data together indicate that, in spite of the small structural changes, the Ca²⁺‐binding event is felt throughout the molecule. The data suggest that the FG‐loop plays an important role in connecting the Ca²⁺‐binding event with the other cytosolic domains of the NCX, in line with in vivo and in vitro biochemical data as well as modeling results that connect the CBD2 FG‐loop with the first Ca²⁺‐binding domain of NCX. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

A high‐throughput screen for ligand binding reveals the specificities of three amino acid chemoreceptors from Pseudomonas syringae pv. actinidiae

Chemoreceptors play a central role in chemotaxis, allowing bacteria to detect chemical gradients and bias their swimming behavior in order to navigate toward favorable environments. The genome of the kiwifruit pathogen, Pseudomonas syringae pv. actinidiae (Psa) strain NZ‐V13 encodes 43 predicted chemoreceptors, none of which has been characterized. We developed a high‐throughput fluorescence‐based thermal shift assay for identifying the signal molecules that are recognized by a given chemoreceptor ligand binding domain (LBD). Using this assay, we characterized the ligand binding profiles of three Psa homologs of the P. aeruginosa PAO1 amino acid chemoreceptors PctA, PctB and PctC. Each recombinant LBD was screened against 95 potential ligands. The three Psa homologs, named pscA, pscB and pscC (P s a c hemoreceptors A , B and C ) bound 3, 10 and 3 amino acids respectively. In each case, their binding profiles were distinct from their P. aeruginosa PAO1 homologs. Notably, Psa PscA‐LBD only bound the acidic amino acids l ‐aspartate, d ‐aspartate and l ‐glutamate, whereas P. aeruginosa PctA‐LBD binds all of the l ‐proteinogenic amino acids except for l ‐aspartate and l ‐glutamate. A combination of homology modeling, site‐directed mutagenesis and functional screening identified a single amino acid residue in the Psa PscA‐LBD (Ala146) that is critically important for determining its narrow specificity.     

Model for the allosteric regulation of the Na+/Ca2+ exchanger NCX

The Na⁺/Ca²⁺ exchanger provides a major Ca²⁺ extrusion pathway in excitable cells and plays a key role in the control of intracellular Ca²⁺ concentrations. In Canis familiaris, Na⁺/Ca²⁺ exchanger (NCX) activity is regulated by the binding of Ca²⁺ to two cytosolic Ca²⁺‐binding domains, CBD1 and CBD2, such that Ca²⁺‐binding activates the exchanger. Despite its physiological importance, little is known about the exchanger's global structure, and the mechanism of allosteric Ca²⁺‐regulation remains unclear. It was found previously that for NCX in the absence of Ca²⁺ the two domains CBD1 and CBD2 of the cytosolic loop are flexibly linked, while after Ca²⁺‐binding they adopt a rigid arrangement that is slightly tilted. A realistic model for the mechanism of the exchanger's allosteric regulation should not only address this property, but also it should explain the distinctive behavior of Drosophila melanogaster's sodium/calcium exchanger, CALX, for which Ca²⁺‐binding to CBD1 inhibits Ca²⁺ exchange. Here, NMR spin relaxation and residual dipolar couplings were used to show that Ca²⁺ modulates CBD1 and CBD2 interdomain flexibility of CALX in an analogous way as for NCX. A mechanistic model for the allosteric Ca²⁺ regulation of the Na⁺/Ca²⁺ exchanger is proposed. In this model, the intracellular loop acts as an entropic spring whose strength is modulated by Ca²⁺‐binding to CBD1 controlling ion transport across the plasma membrane. Proteins 2016; 84:580–590. © 2016 Wiley Periodicals, Inc.     

Investigating the disorder–order transition of calmodulin binding domain upon binding calmodulin using molecular dynamics simulation

We have studied the conformational transition of the calmodulin binding domains (CBD) in several calmodulin‐binding kinases, in which CBD changes from the disordered state to the ordered state when binding with calmodulin (CaM). Targeted molecular dynamics simulation was used to investigate the binding process of CaM and CBD of CaM‐dependent kinase I (CaMKI–CBD). The results show that CaMKI–CBD began to form an α‐helix and the interaction free energy between CaM and CaMKI–CBD increased once CaM fully encompassed CaMKI–CBD. Two series of CaM/CBD complex systems, including the complexes of CaM with the initially disordered and the final ordered CBD, were constructed to study the interaction using molecular dynamics simulations. Our analyses suggest that the VDW interaction plays a dominant role in CaM/CBD binding and is a key factor in the disorder–order transition of CBD. Additionally, the entropy effect is not in favor of the formation of the CaM/CBD complex, which is consistent with the experimental evidence. Based on the results, it appears that the CBD conformational change from a non‐compact extended structure to compact α‐helix is critical in gaining a favorable VDW interaction and interaction free energy. Copyright © 2009 John Wiley & Sons, Ltd.     

Selection and structural analysis of de novo proteins from an α3β3 genetic library

The construction of novel functional proteins has been a key area of protein engineering. However, there are few reports of functional proteins constructed from artificial scaffolds. Here, we have constructed a genetic library encoding α3β3 de novo proteins to generate novel scaffolds in smaller size using a binary combination of simplified hydrophobic and hydrophilic amino acid sets. To screen for folded de novo proteins, we used a GFP‐based screening system and successfully obtained the proteins from the colonies emitting the very bright fluorescence as a similar intensity of GFP. Proteins isolated from the very bright colonies (vTAJ) and bright colonies (wTAJ) were analyzed by circular dichroism (CD), 8‐anilino‐1‐naphthalenesulfonate (ANS) binding assay, and analytical size‐exclusion chromatography (SEC). CD studies revealed that vTAJ and wTAJ proteins had both α‐helix and β‐sheet structures with thermal stabilities. Moreover, the selected proteins demonstrated a variety of association states existing as monomer, dimer, and oligomer formation. The SEC and ANS binding assays revealed that vTAJ proteins tend to be a characteristic of the folded protein, but not in a molten‐globule state. A vTAJ protein, vTAJ13, which has a packed globular structure and exists as a monomer, was further analyzed by nuclear magnetic resonance. NOE connectivities between backbone signals of vTAJ13 suggested that the protein contains three α‐helices and three β‐strands as intended by its design. Thus, it would appear that artificially generated α3β3 de novo proteins isolated from very bright colonies using the GFP fusion system exhibit excellent properties similar to folded proteins and would be available as artificial scaffolds to generate functional proteins with catalytic and ligand binding properties.     

泸型酒窖泥中梭菌的分离及代谢产物分析

[目的] 分离窖泥中的梭菌微生物并对其代谢产物进行评估。[方法] 对窖泥中梭菌群落的16S rRNA基因进行高通量测序;利用高丰度的梭菌OTU序列在KOMODO数据库进行培养基的预测,定向分离窖泥中梭菌菌株;采用顶空固相微萃取结合气相色谱质谱联用仪对窖泥和代表性梭菌菌株的挥发性代谢产物进行检测。[结果] 利用KOMODO数据库预测的梭菌培养基共计筛选到31株梭菌微生物,分属于梭菌属的14个种;根据风味代谢特性,这些菌株主要分为两大类,一是C.carboxidivorans、C.sporogenes和C.tyrobutyricum等产酸为主的梭菌,二是C.beijerinckii、C.butyricum和C.sphenoides等产醇为主的梭菌。[结论] 利用测序序列预测培养基有助于从窖泥中分离获得丰富的梭菌菌株,其物种和代谢能力的多样性对解析白酒复杂风味形成机理奠定了一定的基础。     

Identification of residues within ligand‐binding domain 1 (LBD1) of the Borrelia burgdorferi OspC protein required for function in the mammalian environment

Borrelia burgdorferi outer surface protein C (ospC) is required for the establishment of infection in mammals. However, its precise function remains controversial. The biologically active form of OspC appears to be a homodimer. Alpha helix 1 and 1′ of the apposing monomers form a solvent‐accessible pocket at the dimeric interface that presents a putative ligand‐binding domain (LBD1). Here we employ site‐directed and allelic‐exchange mutagenesis to test the hypothesis that LBD1 is a determinant of OspC function in the mammalian environment. Substitution of residues K60, E61 and E63 which line LBD1 resulted in the loss of infectivity or influenced dissemination. Analyses of the corresponding recombinant proteins demonstrated that the loss of function was not due to structural perturbation, impaired dimer formation or the loss of plasminogen binding. This study is the first to assess the involvement of individual residues and domains of OspC in its in vivo function. The data support the hypothesis that OspC interacts with a mammalian derived ligand that is critical for survival during early infection. These results shed new light on the structure–functions relationships of OspC and challenge existing hypotheses regarding OspC function in mammals.     

Analysis of expression and chitin‐binding activity of the wing disc cuticle protein BmWCP4 in the silkworm,Bombyx mori

The insect exoskeleton is mainly composed of chitin filaments linked by cuticle proteins. When insects molt, the cuticle of the exoskeleton is renewed by degrading the old chitin and cuticle proteins and synthesizing new ones. In this study, chitin‐binding activity of the wing disc cuticle protein BmWCP4 in Bombyx mori was studied. Sequence analysis showed that the protein had a conservative hydrophilic “R&R” chitin‐binding domain (CBD). Western blotting showed that BmWCP4 was predominately expressed in the wing disc‐containing epidermis during the late wandering and early pupal stages. The immunohistochemistry result showed that the BmWCP4 was mainly present in the wing disc tissues containing wing bud and trachea blast during day 2 of wandering stage. Recombinant full‐length BmWCP4 protein, “R&R” CBD peptide (CBD), non‐CBD peptide (BmWCP4‐CBD^?), four single site‐directed mutated peptides (M₁, M₂, M₃ and M₄) and four‐sites‐mutated peptide (M_F) were generated and purified, respectively, for in vitro chitin‐binding assay. The results indicated that both the full‐length protein and the “R&R” CBD peptide could bind with chitin, whereas the BmWCP4‐CBD^? could not bind with chitin. The single residue mutants M₁, M₂, M₃ and M₄ reduced but did not completely abolish the chitin‐binding activity, while four‐sites‐mutated protein M_F completely lost the chitin‐binding activity. These data indicate that BmWCP4 protein plays a critical role by binding to the chitin filaments in the wing during larva‐to‐pupa transformation. The conserved aromatic amino acids are critical in the interaction between chitin and the cuticle protein.     

Structural insights into the binding and catalytic mechanisms of the Listeria monocytogenes bacteriophage glycosyl hydrolase PlyP40

Endolysins are bacteriophage‐encoded peptidoglycan hydrolases that specifically degrade the bacterial cell wall at the end of the phage lytic cycle. They feature a distinct modular architecture, consisting of enzymatically active domains (EADs) and cell wall‐binding domains (CBDs). Structural analysis of the complete enzymes or individual domains is required for better understanding the mechanisms of peptidoglycan degradation and provides guidelines for the rational design of chimeric enzymes. We here report the crystal structure of the EAD of PlyP40, a member of the GH‐25 family of glycosyl hydrolases, and the first muramidase reported for Listeria phages. Site‐directed mutagenesis confirmed key amino acids (Glu98 and Trp10) involved in catalysis and substrate stabilization. In addition, we found that PlyP40 contains two heterogeneous CBD modules with homology to SH3 and LysM domains. Truncation analysis revealed that both domains are required for full activity but contribute to cell wall recognition and lysis differently. Replacement of CBDP40 with a corresponding domain from a different Listeria phage endolysin yielded an enzyme with a significant shift in pH optimum. Finally, domain swapping between PlyP40 and the streptococcal endolysin Cpl‐1 produced an intergeneric chimera with activity against Listeria cells, indicating that structural similarity of individual domains determines enzyme function.     

Novel surface display system for heterogonous proteins on Lactobacillus plantarum

Aims: To establish a novel cell surface display system that would enable the display of target proteins on Lactobacillus plantarum. Methods and Results: Blast P analysis of the amino acids sequence data revealed that the N‐terminus of the putative muropeptidase MurO from L. plantarum contained two putative lysin motif (LysM) repeat regions, implying that the MurO was involved in bacterial cell wall binding. To investigate the potential of MurO for surface display, green fluorescent protein (GFP) was fused to MurO at its C‐terminus and the resulting fusion protein was expressed in Escherichia coli. After being mixed with L. plantarum cells in vitro, GFP was successfully displayed on the surfaces of L. plantarum cells. Increases in the fluorescence intensities of chemically pretreated L. plantarum cells compared to those of nonpretreated cells suggested that the peptidoglycan was the binding ligand for MurO. SDS sensitivity assay showed that the GFP fluorescence intensity was reduced after being treated with SDS. To demonstrate the applicability of the MurO‐mediated surface display system, β‐galactosidase from Bifidobacterium bifidium, in place of GFP, was functionally displayed on the surface of L. plantarum cells via MurO. Conclusions: The MurO was a novel anchor protein for constructing a surface display system for L. plantarum. Significance and Impact of Study: The success in surface display of GFP and β‐galactosidase opened up the feasibility of employing the cell wall anchor of MurO for surface display in L. plantarum.