高产油小球藻的筛选及其油脂分析

小球藻广泛分布于各种生境,特别是淡水环境中,适应性强。其同化产物主要是淀粉,但在环境胁迫条件下可显著积累中性脂,其脂肪酸类型主要为C16和C18,适合作为生物柴油的原料。我们从中国部分地区水体中分离纯化到若干株小球藻,通过薄层层析比较分析了21株产油小球藻的油脂含量,筛选到一株三酰基甘油含量较高的藻株Chlorella sp.NMX37N。其适宜生长温区为15—35℃,在25℃时生长速率最快,比生长速率为0.53/d,生长的最适光强为250μmol photons/(m2.s)。批量培养实验显示,藻细胞的三酰基甘油含量随培养时间延长而增加,并在培养的稳定期达到最大值,此时培养液中氮基本被耗尽。在批量培养条件下培养Chlorella sp.NMX37N约40d,藻细胞中总脂含量可达到33%左右,与此相比通过两步培养方式,将培养至对数后期(约20d)的藻细胞缺氮处理48h后,得到的总脂产率相当。通过两步培养方式可以大大缩短培养时间,使得该藻细胞快速有效积累油脂。另外,气相色谱分析显示,该藻的总脂和三酰基甘油的脂肪酸均以C16∶0和C18∶2为主,占总脂肪酸的70%以上,且不含C20以上的长链脂肪酸,可以作为优质的生物柴油原料。     

Composition of sugarcane waxes in rum factory wastes

Wastes produced during fermentation and distillation of crude sugarcane juice in rum factories were evaluated as a new source of waxes. The chemical composition of the crude wax extracted from adsorbat of the wastes on fuller's earth was studied by GC-mass spectrometry. Series of linear alkanes (C19-C33), and wax esters constitute the main components. In addition, phytosterols, triterpene methyl ethers, ethyl and methyl esters of fatty acids, and free fatty acids were found as minor components. Acid (predominance of C16 and C18) and alcohol portions (C26-C32) of the wax esters were analysed after saponification.     

Effect of age on the fatty acid content of Blumeria graminis conidia

Blumeria (=Erysiphe) graminis f.sp. tritici (Bgt), the causal agent of wheat powdery mildew, is responsible for an important disease leading to considerable yield reductions in wheat worldwide. Conidia of the obligate plant pathogen Bgt were analysed for their total fatty acid (FA) composition as a function of their ontogeny. A total of 17 FAs were detected (C(12)-C(24) saturated and unsaturated ones), including the presence of unusual long-chain monoenoic FAs. In young conidia, the major FAs were C(18:2) (23%), C(16:0) (16%), C(18:0) (15.2%) and C(18:1) (14.3%). In old conidia, the main FAs were C(24:1) (20.7%), C(22:0) (15%), C(22:1) (13.5%) and C(24:0) (9.7%). The amount of total FA was about 39 microg.mg of dry weight(-1) in young conidia and decreased clearly to 18 microg.mg of dry weight(-1) in older conidia. For the first time, we have demonstrated that the FA composition of conidia changes greatly with age. Medium-chain FAs (C(12)-C(18)) are predominant in very young conidia (75%), whereas long-chain FAs (C(22)-C(24)) are the major compounds in old conidia (74%). This study showed a significant elongation of FAs and a drastic decrease in the total FA amount during the ontogeny of conidia.     

Manipulating fatty-acid profile at unit chain-length resolution in the model industrial oleaginous microalgae Nannochloropsis

The chain length (CL) of fatty acids (FAs) is pivotal to oil property, yet to what extent it can be customized in industrial oleaginous microalgae is unknown. In Nannochloropsis oceanica, to modulate long-chain FAs (LCFAs), we first discovered a fungi/bacteria-originated polyketide synthase (PKS) system which involves a cytoplasmic acyl-ACP thioesterase (NoTE1). NoTE1 hydrolyzes C16:0-, C16:1- and C18:1-ACP in vitro and thus intercepts the specific acyl-ACPs elongated by PKS for polyunsaturated FA biosynthesis, resulting in elevation of C16/C18 monounsaturated FAs when overproduced and increase of C20 when knocked out. For medium-chain FAs (MCFAs; C8-C14), C8:0 and C10:0 FAs are boosted by introducing a Cuphea palustris acyl-ACP TE (CpTE), whereas C12:0 elevated by rationally engineering CpTE enzyme's substrate-binding pocket to shift its CL preference towards C12:0. A mechanistic model exploiting both native and engineered PKS and type II FAS pathways was thus proposed for manipulation of carbon distribution among FAs of various CL. The ability to tailor FA profile at the unit CL resolution from C8 to C20 in Nannochloropsis spp. lays the foundation for scalable production of designer lipids via industrial oleaginous microalgae.     

Variability of Wax Ester Fermentation in Natural and Bleached Euglena gracilis Strains in Response to Oxygen and the Elongase Inhibitor Flufenacet

ABSTRACT. Euglena gracilis is able to synthesize adenosine triphosphate under anaerobic conditions through a malonyl-independent fatty acid synthesis leading to wax ester fermentation. Mitochondrial fatty acid synthesis uses acetyl-CoA and propionyl-CoA as C2- and C3-donors for de novo synthesis of even- and odd-numbered fatty acids, respectively. Euglena' s wax ester fermentation has only been described in the E. gracilis strain 1224-5/25 Z. Here we investigate eight E. gracilis strains isolated in 1932–1958 from different localities in Europe and two bleached substrains of E. gracilis 1224-5/25, obtained by treatment with streptomycin and ofloxacin, and examine their anaerobic growth, wax ester fermentation, and wax ester composition. Under ambient oxygen levels, all strains accumulated wax esters in concentrations between 0.3% and 3.5% of the dry weight, but the strains revealed marked differences in wax ester accumulation with respect to anaerobic growth. Most fermenting strains tested showed increased wax ester synthesis under anaerobic conditions as well as the increased synthesis of odd-numbered fatty acids and alcohols suggesting an activation of the mitochondrial fatty acid biosynthesis pathway. Addition of the elongase inhibitor flufenacet to the growth medium specifically reduced the accumulation of odd-numbered fatty acids and alcohols and tended to increase the overall yield of anaerobic wax esters.     

Very long-chain phenylpropyl and phenylbutyl esters from Taxus baccata needle cuticular waxes

The cuticular wax of Taxus baccata L. needles was found to contain four different classes of long-chain esters that were identified by various chemical transformations with product assignment employing GC-MS. Homologous series of (1) 3-(4'-hydroxyphenyl)-propyl esters of C(20)-C(36) fatty acids, (2) 4-(4'-hydroxyphenyl)-2-butyl esters of C(18)-C(28) fatty acids, (3) 3-(3',4'-dihydroxyphenyl)-propyl esters of C(20)-C(32) fatty acids, and (4) 4-(3',4'-dihydroxyphenyl)-2-butyl esters of C(18)-C(28) fatty acids were identified. The four compound classes amounted to 0.1-3.6 micro g/cm(2) of needle surface area, corresponding to 0.2-7.6% of the wax mixture, respectively. While both phenylpropyl ester series had a maximum for the homolog containing tetracosanoic acid, in the phenylbutyl esters homologs containing eicosanoic and docosanoic acids predominated.     

Characterization of fatty acid composition in healthy and bleached corals from Okinawa, Japan

Under bleaching conditions, corals lose their symbiotic zooxanthellae, and thus, the ability to synthesize fatty acids (FAs) from photosynthetically derived carbon. This study investigated the lipid content and FA composition in healthy and bleached corals from the Odo reef flat in Okinawa, southern Japan, following a bleaching event. It was hypothesized that the FA composition and abundance would change as algae are lost or die, and possibly microbial abundance would increase in corals as a consequence of bleaching. The lipid content and FA composition of three healthy coral species (Pavona frondifera, Acropora pulchra, and Goniastrea aspera) and of partially bleached and completely bleached colonies of P. frondifera were examined. The FA composition did not differ among healthy corals, but differed significantly among healthy, partially bleached, and completely bleached specimens of P. frondifera. Completely bleached corals contained significantly lower lipid and total FA content, as well as lower relative amounts of polyunsaturated FAs and higher relative amounts of saturated FAs, than healthy and partially bleached corals. Furthermore, there was a significantly higher relative concentration of monounsaturated FAs and odd-numbered branched FAs in completely bleached corals, indicating an increase in bacterial colonization in the bleached corals.     

Fatty acid derivatives and their use as CFPP additives in biodiesel

One of the main drawbacks of the use of biodiesel is its bad behavior at low temperatures. In this work, we show that it is possible to take profit of the presence of free fatty acids in the starting materials used for biodiesel production (i.e. reused oils) by synthesizing additives able to improve cold flow properties. The synthesis of fatty acid derivatives have been successfully carried out by esterification of stearic, oleic and linoleic acids with bulky linear and cyclic alcohols and by epoxidation of methyl oleate and subsequent ring-opening reaction with the same alcohols. The study of crystallization patterns of pure derivatives by DSC and optical microscopy revealed the improvement of cold properties of biodiesel. Blends of biodiesel with up to 5% of some of these compounds allowed a decrease of CFPP (Cold Filter Pour Point). Both observations reveal the utility of these compounds as cheap and renewable additives.     

Biodiesel production by in situ transesterification of municipal primary and secondary sludges

The potential of using municipal wastewater sludges as a lipid feedstock for biodiesel production was investigated. Primary and secondary sludge samples obtained from a municipal wastewater treatment plant in Tuscaloosa, AL were freeze-dried and subjected to an acid-catalyzed insitu transesterification process. Experiments were conducted to determine the effects of temperature, sulfuric acid concentration, and mass ratio of methanol to sludge on the yield of fatty acid methyl esters (FAMEs). Results indicated a significant interactive effect between temperature, acid concentration, and methanol to sludge mass ratio on the FAME yield for the insitu transesterification of primary sludge, while the FAME yield for secondary sludge was significantly affected by the independent effects of the three factors investigated. The maximum FAME yields were obtained at 75 degrees C, 5% (v/v) H(2)SO(4), and 12:1 methanol to sludge mass ratio and were 14.5% and 2.5% for primary and secondary sludge, respectively. Gas chromatography (GC) analysis of the FAMEs revealed a similar fatty acid composition for both primary and secondary sludge. An economic analysis estimated the cost of $3.23/gallon for a neat biodiesel obtained from this process at an assumed yield of 10% FAMEs/dry weight of sludge.     

Tailoring the composition of novel wax esters in the seeds of transgenic Camelina sativa through systematic metabolic engineering

The functional characterization of wax biosynthetic enzymes in transgenic plants has opened the possibility of producing tailored wax esters (WEs) in the seeds of a suitable host crop. In this study, in addition to systematically evaluating a panel of WE biosynthetic activities, we have also modulated the acyl‐CoA substrate pool, through the co‐expression of acyl‐ACP thioesterases, to direct the accumulation of medium‐chain fatty acids. Using this combinatorial approach, we determined the additive contribution of both the varied acyl‐CoA pool and biosynthetic enzyme substrate specificity to the accumulation of non‐native WEs in the seeds of transgenic Camelina plants. A total of fourteen constructs were prepared containing selected FAR and WS genes in combination with an acyl‐ACP thioesterase. All enzyme combinations led to the successful production of wax esters, of differing compositions. The impact of acyl‐CoA thioesterase expression on wax ester accumulation varied depending on the substrate specificity of the WS. Hence, co‐expression of acyl‐ACP thioesterases with Marinobacter hydrocarbonoclasticus WS and Marinobacter aquaeolei FAR resulted in the production of WEs with reduced chain lengths, whereas the co‐expression of the same acyl‐ACP thioesterases in combination with Mus musculus WS and M. aquaeolei FAR had little impact on the overall final wax composition. This was despite substantial remodelling of the acyl‐CoA pool, suggesting that these substrates were not efficiently incorporated into WEs. These results indicate that modification of the substrate pool requires careful selection of the WS and FAR activities for the successful high accumulation of these novel wax ester species in Camelina seeds.     

Wax esters of different compositions produced via engineering of leaf chloroplast metabolism in Nicotiana benthamiana

In a future bio-based economy, renewable sources for lipid compounds at attractive cost are needed for applications where today petrochemical derivatives are dominating. Wax esters and fatty alcohols provide diverse industrial uses, such as in lubricant and surfactant production. In this study, chloroplast metabolism was engineered to divert intermediates from de novo fatty acid biosynthesis to wax ester synthesis. To accomplish this, chloroplast targeted fatty acyl reductases (FAR) and wax ester synthases (WS) were transiently expressed in Nicotiana benthamiana leaves. Wax esters of different qualities and quantities were produced providing insights to the properties and interaction of the individual enzymes used. In particular, a phytyl ester synthase was found to be a premium candidate for medium chain wax ester synthesis. Catalytic activities of FAR and WS were also expressed as a fusion protein and determined functionally equivalent to the expression of individual enzymes for wax ester synthesis in chloroplasts.     

Acid-catalyzed esterification of Zanthoxylum bungeanum seed oil with high free fatty acids for biodiesel production

A technique to produce biodiesel from crude Zanthoxylum bungeanum seed oil (ZSO) with high free fatty acids (FFA) was developed. The acid value of ZSO was reduced to 1.16mg KOH/g from 45.51mg KOH/g by only one-step acid-catalyzed esterification with methanol-to-oil molar ratio 24:1, H(2)SO(4) 2%, temperature 60 degrees C and reaction time 80min, which was selected as optimum for the acid-catalyzed esterification. During the acid-catalyzed esterification, FFA was converted into fatty acid methyl esters, which was confirmed by (1)H NMR spectrum. Compared with the other two-step pretreatment procedure, this one-step pretreatment can reduce the production cost of ZSO biodiesel. Alkaline-catalyzed transesterification converted the pretreated ZSO into ZSO biodiesel. The yield of ZSO biodiesel was above 98% determined by (1)H NMR spectrum. This study supports the use of crude ZSO as a viable and valuable raw feedstock for biodiesel production.     

Metabolic engineering of Escherichia coli for efficient free fatty acid production from glycerol

Crude glycerol, generated as waste by-product in biodiesel production process, has been considered as an important carbon source for converting to value-added bioproducts recently. Free fatty acids (FFAs) can be used as precursors for the production of biofuels or biochemicals. Microbial biosynthesis of FFAs can be achieved by introducing an acyl–acyl carrier protein thioesterase into Escherichia coli. In this study, the effect of metabolic manipulation of FFAs synthesis cycle, host genetic background and cofactor engineering on FFAs production using glycerol as feed stocks was investigated. The highest concentration of FFAs produced by the engineered stain reached 4.82 g/L with the yield of 29.55% (g FFAs/g glycerol), about 83% of the maximum theoretical pathway value by the type II fatty acid synthesis pathway. In addition, crude glycerol from biodiesel plant was also used as feedstock in this study. The FFA production was 3.53 g/L with a yield of 24.13%. The yield dropped slightly when crude glycerol was used as a carbon source instead of pure glycerol, while it still can reach about 68% of the maximum theoretical pathway yield.     

Microwave-Assisted Extraction of Wax from Oily Sludge: An Experimental Study and its Process Variables Optimization Using Response Surface Methodology

The wax present in petroleum sludge, generated by refineries and at crude production sites, consists of paraffin hydrocarbons (C18–C36) known as paraffin wax and naphthenic hydrocarbons (C30–C60). The present study is aimed at the recovery of wax from petroleum oily sludge by microwave-assisted solvent extraction using a Toluene/MEK mixture and subsequently de-crystallizing the wax. The process variables affecting the microwave-assisted solvent extraction are optimized for recovery of wax. The simultaneous effects of process variables such as irradiation time (2–10 minutes), solvent to sludge ratio (40–80 wt%), reactant volume (100–300 ml), and microwave power (80–400 W) on the recovery of wax were evaluated. A central composite design and response surface methodology were used for the optimization of the extraction process. Based on the central composite design, quadratic models were developed to correlate the extraction process variables with the responses and the models were analyzed using appropriate statistical methods for analysis of variance. Optimization of process variables shows the maximum recovery of wax was about 79.57% at 300 ml of reactant volume with microwave power output of 400 W at 7.6 minutes of retention time with 56.56% of Toluene/MEK to sludge ratio.     

Occurrence, production, and export of lipophilic compounds by hydrocarbonoclastic marine bacteria and their potential use to produce bulk chemicals from hydrocarbons

Petroleum (or crude oil) is a complex mixture of hydrocarbons. Annually, millions of tons of crude petroleum oil enter the marine environment from either natural or anthropogenic sources. Hydrocarbon-degrading bacteria (HDB) are able to assimilate and metabolize hydrocarbons present in petroleum. Crude oil pollution constitutes a temporary condition of carbon excess coupled to a limited availability of nitrogen that prompts marine oil-degrading bacteria to accumulate storage compounds. Storage lipid compounds such as polyhydroxyalkanoates (PHAs), triacylglycerols (TAGs), or wax esters (WEs) constitute the main accumulated lipophilic substances by bacteria under such unbalanced growth conditions. The importance of these compounds as end-products or precursors to produce interesting biotechnologically relevant chemicals has already been recognized. In this review, we analyze the occurrence and accumulation of lipid storage in marine hydrocarbonoclastic bacteria. We further discuss briefly the production and export of lipophilic compounds by bacteria belonging to the Alcanivorax genus, which became a model strain of an unusual group of obligate hydrocarbonoclastic bacteria (OHCB) and discuss the possibility to produce neutral lipids using A. borkumensis SK2.     

Use of reversed phase HP liquid chromatography to assay conversion of N-acylglycines to primary fatty acid amides by peptidylglycine-alpha-amidating monooxygenase

Primary fatty acid amides (R-CO-NH2) and N-acylglycines (R-CO-NH-CH2-COOH) are classes of compounds that have only recently been isolated and characterized from biological sources. Key questions remain regarding how these lipid amides are produced and degraded in biological systems. Relative to the fatty acids, little has been done to develop methods to separate and quantify the fatty acid amides and N-acylglycines. We describe reversed phase HPLC methods for the separation of C2-C12 primary fatty acid amides and N-acylglycines and also C12-C22 fatty acid amides. Separation within each class occurs primarily on the basis of simple interactions between the acyl chain and the chromatographic stationary phase, but the polar headgroups on these and related fatty acids and N-acylethanolamides modulate the absolute retention in reversed phase mode. We use these methods to measure the enzyme-mediated, two-step conversion of N-octanoylglycine to octanoamide.     

Identification of long chain specific aldehyde reductase and its use in enhanced fatty alcohol production in E. coli

Long chain fatty alcohols have wide application in chemical industries and transportation sector. There is no direct natural reservoir for long chain fatty alcohol production, thus many groups explored metabolic engineering approaches for its microbial production. Escherichia coli has been the major microbial platform for this effort, however, terminal endogenous enzyme responsible for converting fatty aldehydes of chain length C14-C18 to corresponding fatty alcohols is still been elusive. Through our in silico analysis we selected 35 endogenous enzymes of E. coli having potential of converting long chain fatty aldehydes to fatty alcohols and studied their role under in vivo condition. We found that deletion of ybbO gene, which encodes NADP⁺ dependent aldehyde reductase, led to >90% reduction in long chain fatty alcohol production. This feature was found to be strain transcending and reinstalling ybbO gene via plasmid retained the ability of mutant to produce long chain fatty alcohols. Enzyme kinetic study revealed that YbbO has wide substrate specificity ranging from C6 to C18 aldehyde, with maximum affinity and efficiency for C18 and C16 chain length aldehyde, respectively. Along with endogenous production of fatty aldehyde via optimized heterologous expression of cyanobaterial acyl-ACP reductase (AAR), YbbO overexpression resulted in 169 mg/L of long chain fatty alcohols. Further engineering involving modulation of fatty acid as well as of phospholipid biosynthesis pathway improved fatty alcohol production by 60%. Finally, the engineered strain produced 1989 mg/L of long chain fatty alcohol in bioreactor under fed-batch cultivation condition. Our study shows for the first time a predominant role of a single enzyme in production of long chain fatty alcohols from fatty aldehydes as well as of modulation of phospholipid pathway in increasing the fatty alcohol production.     

Factors affecting the growth and the oil accumulation of marine microalgae, Tetraselmis suecica

Biomass production and oil productivity in microalgae culture are the most important key factors for algal biodiesel production. However, proper culture condition for the biomass production of microalgae is different from that for the oil production of microalgae. A study on the biomass production of Tetraselmis suecica using various light intensities and nitrate concentrations as growth factors was carried out to evaluate proper culture conditions in 20-L batch culture. The effect of nitrate depletion on the oil accumulation was also evaluated with two-stage culture. It took 5 days to reach the stationary phase for the cultures of T. suecica on the light intensities of 108.9 and 133.1 μmol m(-2 )s(-1) with biomass of 0.89 and 0.88 g dcw L(-1), respectively. Biomass productions of 1.07 and 1.00 g dcw L(-1) were obtained with the nitrate concentrations of 18.6 and 24.7 mg L(-1), respectively. The two-stage culture increased oil contents from 7.6 to 17.3% (w/w) and contents of C(16)-C(18) fatty acids from 540.2 to 720.5 mg g(-1) oil. The predominant fatty acid was palmitic acid (C(16:0)) in nitrate depletion group, however, oleic acid (C(18:1)) was predominated in nitrate added groups. The two-stage culture enhanced overall oil productivity of 18.7 mg g(-1) day(-1) which is higher than that of 12.2 mg g(-1) day(-1) in single-stage culture.     

Quantitative evaluation of sebum lipid components with nuclear magnetic resonance

A NMR spectroscopic method is described that enables the quantitation of specific lipid classes and components, independent of fatty acid composition. We demonstrate this method for measuring cholesterol, squalene, and pools of sterol esters, wax esters (WEs), and triglyceride (TG) components in sebum and meibum. When 600 MHz NMR equipment is used in conjunction with highly sensitive cryogenically cooled probes, this method has adequate sensitivity, and for some applications, advantages over commonly used HPLC-evaporative light-scattering detection and mass spectrometry-based approaches. This method is shown to be useful for preclinical and clinical monitoring of the efficacy of sebum-reducing agents in animals and humans. In Syrian hamsters, 3% topical flutamide and 20 mg/kg oral isotretinoin reduced sterol esters by 18.7% and 30.0%, respectively, and reduced WEs by 32.9% and 31.8%, respectively, as measured in a punch biopsy of the ear. In a 72 patient clinical methodology study, the assay delivered reproducible and noninvasive measurements of WEs, cholesteryl esters, TGs, and squalene from Sebutape skin blots. The quantitative results of sebum analysis obtained by the NMR method correlate well with those obtained with HPLC-based approaches. This approach may be broadly applicable to cases in which fatty acid-independent quantification of lipid classes is desired.