Growth kinetics and fucoxanthin production of <Emphasis Type="Italic">Phaeodactylum tricornutum</Emphasis> and <Emphasis Type="Italic">Isochrysis galbana</Emphasis> cultures at different light and agitation conditions

Fucoxanthin is a carotenoid that exerts multiple beneficial effects on human health. However, reports comparing microalgae culture conditions and their effect on growth and fucoxanthin production are still limited. Isochrysis galbana and Phaeodactylum tricornutum cultures in different light (62.0, 25.9, 13.5, or 9.1 μmol photons m^-2 s^-1), mixing conditions (1 vvm aeration or 130 rpm agitation), and media compositions (F/2 and Conway medium) were studied for comparison of cellular growth and fucoxanthin production on F/2 medium. I. galbana showed a better adaptation to tested culture conditions in comparison with P. tricornutum, reaching 2.15?×?10⁷?±?4.07?×?10⁶ cells mL^-1 and a specific growth rate (μ) of 1.12?±?0.05 day^-1 under aerated conditions and 62.0 μmol photons m^-2 s^-1 light intensity. Fucoxanthin concentration was about 25 % higher in P. tricornutum cultures under 13.5 μmol photons m^-2 s^-1 light intensity and aerated conditions, but the highest fucoxanthin total production was higher in I. galbana, where 3.32 mg can be obtained from 1 L batch cultures at the 16th day under these conditions. Moreover, higher cell densities (~32.41 %), fucoxanthin concentration (~42.46 %), and total production (~50.68 %) were observed in I. galbana cultures grown in Conway medium, if compared with cultures grown in F/2 medium. The results show that the best growth conditions did not result in the best fucoxanthin production for either microalgae, implying that there is not a direct relationship between cellular growth and fucoxanthin production. Moreover, the results suggest that I. galbana cultures on Conway medium are strong candidates for fucoxanthin production, where 1.2 to 15 times higher fucoxanthin concentration are observed in comparison to macroalgal sources.     

Inducing flocculation of non-floc-forming <Emphasis Type="Italic">Escherichia coli</Emphasis> cells

The present article reviews several approaches for inducing flocculation of Escherichia coli cells. The common industrially used bacterium E. coli does not naturally have floc-forming ability. However, there are several approaches to induce flocculation of E. coli cells. One is induction by flocculants—polyvalent inorganic salts, synthetic polymeric flocculants, or bio-based polymeric materials, including polysaccharide derivatives. Another method is the induction of spontaneous flocculation by changing the phenotypes of E. coli cells; several studies have shown that physical treatment or gene modification can endow E. coli cells with floc-forming ability. Coculturing E. coli with other microbes is another approach to induce E. coli flocculation. These approaches have particular advantages and disadvantages, and remain open to clarification of the flocculation mechanisms and improvement of the induction processes. In this review, several approaches to the induction of E. coli flocculation are summarized and discussed. This review will be a useful guide for the future development of methods for the flocculation of non-floc-forming microorganisms.     

Oil production by six microalgae: impact of flocculants and drying on oil recovery from the biomass

Oil production in batch photoautotrophic cultures of the following microalgae is reported: the freshwater microalgae Chlorella vulgaris, Choricystis minor, and Neochloris sp.; the marine microalgae Nannochloropsis salina and Cylindrotheca fusiformis; and C. vulgaris grown in a full-strength seawater medium. In all cases, the solvent extraction of lipids from freeze-dried biomass is compared with extraction from the fresh biomass paste. For all algae, the oils could be extracted equally effectively from freeze-dried samples and the paste samples (67–88 % moisture by weight). Moisture content determinations of the biomass using the freeze-drying method and the high-temperature oven drying were found to be equivalent for all algae. The biomass recovered by flocculation with metal salts (aluminum sulfate, ferric chloride) followed by centrifugation had a certain amount of the flocculant irreversibly bound to it. Washing failed to remove the adsorbed flocculants. For all algae, the adsorbed flocculants did not interfere with oil recovery by solvent extraction. The solvent system of chloroform–methanol–water proved highly effective for quantitative extraction of the lipids from all algae.     

Harvesting <Emphasis Type="Italic">Neochloris oleoabundans</Emphasis> using commercial organic flocculants

Microalgal cultures are inherently dilute, and increasing their concentration is essential for volume reduction and further processing. Flocculation is a classical operation in water treatment that is also used as a concentration step in microalgal biotechnology. However, flocculation is highly dependent on the physicochemical characteristics of the system, such as cell charge and concentration, pH, and solutes in the system, and the coagulant or flocculant to be used. This paper describes the efficiency of nine flocculating agents applied to Neochloris oleoabundans flocculation: low molecular weight chitosan; Zetag® 8165, 8185, 7652, and 4120; Magnafloc® LT22 and 351; and Tanfloc® SG and SH. The influence of flocculant concentration (from 3 to 16 mg L^?1) and pH (from 6 to 10) was evaluated, showing a small influence of pH and a large influence of the type and concentration of flocculating agent. These effects are discussed regarding the flocculant charge and the zeta potential of the cells. The best flocculants were Zetag® 8185, Zetag® 8165, and chitosan, with floc sedimentation efficiencies higher than 95%. These flocculants were further evaluated for their efficiency in various concentrations at the native pH of N. oleoabundans cultures, with good efficiency.

Open image in new window

Graphical abstract ?

     

Magnetophoretic harvesting of freshwater microalgae using polypyrrole/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocomposite and its reusability

A magnetophoretic harvesting agent, a polypyrrole/Fe₃O₄ magnetic nanocomposite, is proposed as a cost and energy efficient alternative to recover biomass of the microalgae Botryococcus braunii, Chlorella protothecoides, and Chlorella vulgaris from their culture media. The maximal recovery efficiency reached almost 99 % for B. braunii, 92.4 % for C. protothecoides, and 90.8 % for C. vulgaris. The maximum adsorption capacity (Q ₀) of the magnetic nanocomposite for B. braunii (63.49 mg dry biomass mg^?1 PPy/Fe₃O₄) was higher than that for C. protothecoides (43.91 mg dry biomass mg^?1 PPy/Fe₃O₄) and C. vulgaris (39.98 mg dry biomass mg^?1 PPy/Fe₃O₄). The highest harvesting efficiency for all the studied microalgae were at pH 10.0, and measurement of zeta-potential confirmed that the flocculation was induced by charge neutralization. This study showed that polypyrrole/Fe₃O₄ can be a promising flocculant due to its high efficacy, low dose requirements, short settling time, its integrity with cells, and with great potential for saving energy because of its recyclability.     

Low temperature and <Emphasis Type="Italic">Daphnia</Emphasis>-associated infochemicals promote colony formation of <Emphasis Type="Italic">Scenedesmus obliquus</Emphasis> and its harvesting

Objective

To explore the combined effects of temperature and Daphnia-associated infochemicals on colony formation of Scenedesmus obliquus to faciliate harvesting the algal biomass.

Results

A three-parameter modified Gaussian model fitted the changes of the number of cells per particle in S. obliquus induced by Daphnia culture filtrate well under any temperature. Decreases in temperature enhanced the induced–colony formation of Scenedesmus. The maximum colony size at 15–25 °C was significantly larger than those at 30–35 °C. An additional 1 or 2 days at low temperature was needed to reach the maximum colony size, which indicates the best harvest time for algal biomass.

Conclusion

Induced-colony formation of Scenedesmus by Daphnia culture filtrate at 15–25 °C is recommended to settle algal cells. This condition facilitates harvesting the biomass.

     

Flocculation of microalgae in brackish and sea waters

Flocculation is an essential step in the concentration and harvesting of microalgae from aquatic media. Salinity of brackish water and sea water requires high flocculant dosages and renders flocculation less effective than in freshwater algal media. Experiments with the marine microalgae Isochrysis galbana and Chlorella stigmatophora showed that effective alum or ferric chloride flocculation was obtained only with dosages which are 5 to 10 times higher than the dosages required for the flocculation of freshwater microalgae. The flocculant dosages required for removing over 90% of the algae from suspensions were found to increase linearly with salinity as expressed in ionic strength. High salinity was found to inhibit flocculation with polyelectrolytes which are quite effective in freshwater algae flocculation. This inhibition was diminished at reduced salinity levels and effective flocculation was attained at salinity levels of 5 g/liter and below, which is typical of desert brackish water. Two methods were found to induce flocculation in sea water: (a) combining polyelectrolytes with inorganic flocculants such as ferric chloride or alum, and (b) ozone oxidation pretreatment followed by flocculation with inorganic flocculants.     

Effects of pH,Salinity, Biomass Concentration,and Algal Organic Matter on Flocculant Efficiency of Synthetic Versus Natural Polymers for Harvesting Microalgae Biomass

This study investigated the effects of pH, salinity, biomass concentration, and algal organic matter (AOM) on the efficiency of four commercial cationic flocculants. The tannin-based biopolymers Tanfloc SG and SL and the polyacrylamide polymers Flopam FO 4800 SH and FO 4990 SH were tested for flocculation of two microalgae models, the freshwater Chlorella vulgaris and the marine Nannochloropsis oculata. Both biomass concentration and AOM presence affected all polymers evaluated, whereas salinity and pH affected only Flopam and Tanfloc, respectively. A restabilization effect due to overdosing was only observed for Flopam polymers and increasing Tanfloc dose resulted in improved efficiency. Flopam polymers showed a significant decrease in the maximum quantum yield of photosystem II as function of polymer dose for Chlorella, which supported the need for toxicological studies to assess the potential toxicity of Flopam. In overall, Tanfloc was not affected by salinity nor presented potential toxicity therefore being recommended for the flocculation of both freshwater and marine species.     

Construction of flavocytochrome <Emphasis Type="Italic">b</Emphasis><Subscript>2</Subscript>-overproducing strains of the thermotolerant methylotrophic yeast <Emphasis Type="Italic">Hansenula polymorpha</Emphasis> (<Emphasis Type="Italic">Pichia angusta</Emphasis>)

L-Lactate cytochrome c oxidoreductase (flavocytochrome b ₂, FC b ₂) from the thermotolerant methylotrophic yeast Hansenula polymorpha (Pichia angusta) is, unlike the enzyme form baker’s yeast, a thermostable enzyme potentially important for bioanalytical technologies for highly selective assays of L-lactate in biological fluids and foods. This paper describes the construction of flavocytochrome b ₂ producers with over-expression of the H. polymorpha CYB2 gene, encoding FC b ₂. The HpCYB2 gene under the control of the strong H. polymorpha alcohol oxidase promoter in a plasmid for multicopy integration was transformed into the recipient strain H. polymorpha C-105 (grc1 catX), impaired in glucose repression and devoid of catalase activity. A method was developed for preliminary screening of the transformants with increased FC b ₂ activity in permeabilized yeast cells. The optimal cultivation conditions providing for the maximal yield of the target enzyme were found. The constructed strain is a promising FC b ₂ producer characterized by a sixfold increased (to 3 μmol min^?1 mg^?1 protein in cell-free extract) activity of the enzyme.     

Interactions of Algae within the Community of <Emphasis Type="Italic">Gracilaria gracilis</Emphasis> (Rhodophyta)

Interactions among the unattached red alga Gracilaria gracilis, the dominant species of an algal community, and associated algal species Chaetomorpha linum, Enteromorpha prolifera f. prolifera, and Polysiphonia sp. were studied during and after an algal bloom. It was shown that during their bloom the associated algae Enteromorpha and Polysiphonia sp. significantly decreased the photosynthetic rate of G. gracilis but did not affect its growth rate. It is suggested that the inhibition of Gracilaria gracilis photosynthesis is connected to the impact of extracellular metabolites excreted by Chaetomorpha linum, Enteromorpha prolifera f. prolifera, and Polysiphonia sp. In laboratory experiments, the photosynthetic rate of the associated species was enhanced in the presence of Gracilaria. However, no significant alterations were observed in the content of chlorophyll a, growth, and the dark respiration rates of associated algae when they were kept together with Gracilaria. It was suggested that allelopathic interactions observed among algal species during the formation of the monospecific Gracilaria community, as well as during algal blooms, are not determinative.     

Evidence of the supercomplex organization of photosystem II and light-harvesting complexes in <Emphasis Type="Italic">Nannochloropsis granulata</Emphasis>

Diverse light-harvesting complexes (LHCs) have been found in photosynthetic microalgae that originated from secondary endosymbiosis involving primary red algae. However, the associations between LHCs and photosystem I (PSI) and photosystem II (PSII) in these microalgae are not fully understood. Eustigmatophyta is a red algal lineage that appears to have a unique organization in its photosynthetic machinery, consisting of only chlorophyll a and carotenoids that are atypical compared with other closely related groups. In this study, the supramolecular organization of pigment–protein complexes in the eustigmatophyte alga, Nannochloropsis granulata was investigated using Clear Native (CN) PAGE coupled with two-dimensional (2D) SDS-PAGE. Our results showed two slowly migrating green bands that corresponded to PSII supercomplexes, which consisted of reaction centers and LHCs. These green bands were also characterized as PSII complexes by their low temperature fluorescence emission spectra. The protein subunits of the PSII–LHC resolved by 2D CN/SDS-PAGE were analyzed by mass spectrometry, and four different LHC proteins were identified. Phylogenetic analysis of the identified LHC protein sequences revealed that they belonged to four different Lhc groups; (1) stress-related Lhcx proteins, (2) fucoxanthin chlorophyll a/c-binding Lhcf proteins, (3) red-shifted Chromera light-harvesting proteins (Red-CLH), and (4) Lhcr proteins, which are commonly found in organisms possessing red algal plastids. This is the first report showing evidence of a pigment–protein supercomplex consisting of PSII and LHCs, and to identify PSII-associated LHC proteins in Nannochloropsis.     

Cultivation of shear stress sensitive and tolerant microalgal species in a tubular photobioreactor equipped with a centrifugal pump

The tolerance to shear stress of Tetraselmis suecica, Isochrysis galbana, Skeletonema costatum, and Chaetoceros muelleri was determined in shear cylinders. The shear tolerance of the microalgae species strongly depends on the strain. I. galbana, S. costatum, and C. muelleri exposed to shear stress between 1.2 and 5.4 Pa resulted in severe cell damage. T. suecica is not sensitive to stresses up to 80 Pa. The possibility to grow these algae in a tubular photobioreactor (PBR) using a centrifugal pump for recirculation of the algae suspension was studied. The shear stresses imposed on the algae in the circulation tubes and at the pressure side of the pump were 0.57 and 1.82 Pa, respectively. The shear stress tolerant T. suecica was successfully cultivated in the PBR. Growth of I. galbana, S. costatum, and C. muelleri in the tubular PBR was not observed, not even at the lowest pumping speed. For the latter shear sensitive strains, the encountered shear stress levels were in the order of magnitude of the determined maximum shear tolerance of the algae. An equation was used to simulate the effect of possible damage of microalgae caused by passages through local high shear zones in centrifugal pumps on the total algae culture in the PBR. This simulation shows that a culture of shear stress sensitive species is bound to collapse after only limited number of passages, confirming the importance of considering shear stress as a process parameter in future design of closed PBRs for microalgal cultivation.     

Comparison of the culture and harvesting of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> and <Emphasis Type="Italic">Tetradesmus obliquus</Emphasis> for the removal of pharmaceuticals from water

The objective of this work was to assess and compare the removal efficiency of paracetamol and salicylic acid from aqueous medium by a microalgae-based treatment, using either Chlorella vulgaris or Tetradesmus obliquus. Moreover, considering microalgae application in wastewater treatment, the influence of these pharmaceuticals in the algal nutrient removal capacity was evaluated. The removal of paracetamol by T. obliquus (>40 %) was larger than by C. vulgaris (>21 %) in batch culture, and this was also observed for salicylic acid (>93 % by T. obliquus and >25 % by C. vulgaris). Both strains removed nutrients (phosphate and nitrate) almost completely by the end of the batch culture, but T. obliquus showed the highest efficiency at the steady state conditions of the semicontinuous culture. In spite of this, under the flocculants here tested, the efficiency in the recovery of biomass was much higher for C. vulgaris. These results highlight the importance of strain selection in the application of microalgae for wastewater treatment and, particularly, for the removal of pharmaceuticals.     

Black Sea algal viruses

Monitoring of the Black Sea algal viruses in Sevastopol bays and Crimean water areas has been carried out since 2002. Based on the methods that were developed and patented by the author, more than 200 strains of algal viruses of five species of microalgae that are new to science were isolated: TvV (Tetraselmis viridis virus), DvV (Dunaliella viridis virus), PtV (Phaeodactylum tricornutum virus), PpV (Prorocentrum pusillum virus) and IgV (Isochrysis galbana virus). For the first time in the Black Sea, the Emiliania huxleyi virus (EhV) of microalgae was isolated. Using the method of electron microscopy, the Black Sea algal viruses were identified as icosahedral virions with respective sizes of 56–60, 45–48, 50–53, 88–92, and 128–132 nm, for the TvV, PtV, DvV, PpV and IgV viruses. The EhV size, as determined by the method of filtration, was within the range of 50–200 nm. In the IgV and EhV viruses we revealed a viral envelope. Based on their characters the isolated algal viruses were attributed to the Phycodnaeviridae. The maximum number of algal viruses was observed in the spring and autumn seasons, which is typical for their host phytoplankton species. The Black Sea algal viruses, TvV, PpV, IgV, and EhV, displayed no strict species specificity and have a wide range of available hosts.     

The influence of different flocculants on the physiological activity and fucoxanthin production of Phaeodactylum tricornutum

Phaeodactylum tricornutum is an economically important species of microalgae that is widely used in aquaculture, and it is rich in bioactive substances including eicosapentaenoic acid and fucoxanthin. The major bottleneck for industrialization of this species is harvesting. Flocculation is used to harvest microalgae, thus the selection of flocculants is of great importance. In this study, we compared the flocculation effect of four different chemicals (ferric chloride, aluminum sulphate, polyaluminum chloride, and aluminum potassium sulphate) on P. tricornutum. Microexamination showed that ferric and aluminum salts had similar flocculation effects on the algae. Growth and chlorophyll fluorescence measurements showed that P. tricornutum can be re-cultured after flocculation. Pigment analysis showed that flocculation did not result in degradation of fucoxanthin, which suggests that the four flocculants tested may be useful for industrial applications. The results also showed that ferric chloride was the best flocculant for harvesting P. tricornutum when the target product was fucoxanthin, as it had the least influence on the physiological activity of P. tricornutum and it did not lead to degradation of cell components. In contrast, aluminum is poisonous to the nervous system of animals and humans. In addition, the culture medium can be recycled after flocculation by ferric chloride.     

Metatrancriptomic analysis from the Hepatopancreas of adult white leg shrimp (<Emphasis Type="Italic">Litopenaeus vannamei)</Emphasis>

The amoeba, Mayorella viridis contains several hundred symbiotic green algae in its cytoplasm. Transmission electron microscopy revealed strong resemblance between symbiotic algae from M. viridis the symbiotic Chlorella sp. in the perialgal vacuoles of Paramecium bursaria and other ciliates. Although it is thought that the M. viridis and symbiotic algae could be model organisms for studying endosymbiosis between protists and green algae, few cell biological observations of the endosymbiosis between M. viridis and their symbiotic algae have been published. In this study, we characterized the specificity of endosymbiotic relationships between green algae and their hosts. Initially, we established stable cultures of M. viridis in KCM medium by feeding with Chlorogonium capillatum. Microscopic analyses showed that chloroplasts of symbiotic algae in M. viridis occupy approximately half of the algal cells, whereas those in P. bursaria occupy entire algal cells. The symbiotic algae in P. bursaria contain several small spherical vacuoles. The labeling of actin filaments using Acti-stain? 488 Fluorescent Phalloidin revealed no relationship between host actin filaments and symbiotic algal localization, although the host mitochondria were localized around symbiotic algae. Symbiotic algae from M. viridis could infect algae-free P. bursaria but could not support P. bursaria growth without feeding, whereas the original symbiotic algae of P. bursaria supported its growth without feeding. These data indicated the specificity of endosymbiotic algae relationships in M. viridis and P. bursaria.     

Adsorptive removal of harmful algal species <Emphasis Type="Italic">Microcystis aeruginosa</Emphasis> directly from aqueous solution using polyethylenimine coated polysulfone-biomass composite fiber

In recent times, the treatment of harmful algal blooms (HABs) became an important environmental issue to preserve and remediate water resources globally. In the present study, the adsorptive removal of harmful algal species Microcystis aeruginosa directly from an aqueous medium was attempted. Waste biomass (Escherichia coli) was immobilized using polysulfone and coated using the cationic polymer polyethylenimine (PEI) to generate PEI-coated polysulfone-biomass composite fiber (PEI-PSBF). The density of M. aeruginosa in an aqueous medium (BG11) was significantly decreased by treatment with PEI-PSBF. additionally, analysis using FE-SEM, confirmed that the removal of M. aeruginosa algal cells by PEI-PSBF was caused by the adsorption mechanism. According to the profiles of phosphorus for the algal cell growth in M. aeruginosa cultivating samples, we found that the adsorbed M. aeruginosa onto the PEI-PSBF lost their biological activity compared to the non-treated M. aeruginosa cells.