Improvement and characterization of a hyperthermophilic glucose isomerase from <Emphasis Type="Italic">Thermoanaerobacter</Emphasis><Emphasis Type="Italic">ethanolicus</Emphasis> and its application in production of high fructose corn syrup

High fructose corn syrup (HFCS) is an alternative of liquid sweetener to sucrose that is isomerized by commercial glucose isomerase (GI). One-step production of 55 % HFCS by thermostable GI has been drawn more and more attentions. In this study, a new hyperthermophilic GI from Thermoanaerobacter ethanolicus CCSD1 (TEGI) was identified by genome mining, and then a 1317 bp fragment encoding the TEGI was synthesized and expressed in Escherichia coli BL21(DE3). To improve the activity of TEGI, two amino acid residues, Trp139 and Val186, around the active site and substrate-binding pocket based on the structural analysis and molecular docking were selected for site-directed mutagenesis. The specific activity of mutant TEGI-W139F/V186T was 2.3-fold and the value of k _cat/K _m was 1.86-fold as compared to the wild type TEGI, respectively. Thermostability of mutant TEGI-W139F/V186T at 90 °C for 24 h showed 1.21-fold extension than that of wild type TEGI. During the isomerization of glucose to fructose, the yield of fructose could maintain above 55.4 % by mutant TEGI-W139F/V186T as compared to 53.8 % by wild type TEGI at 90 °C. This study paved foundation for the production of 55 % HFCS using the thermostable TEGI.     

Cloning of <Emphasis Type="Italic">Escherichia coli</Emphasis> K12 xylose isomerase (glucose isomerase) gene and studying the enzymatic properties of its expression product

The coding region of Escherichia coli K12 xylose (glucose) isomerase gene was inserted into the pRAC expression vector and cloned in E. coli BL21(DE3) cells. After induction of expression of the cloned gene, the proportion of recombinant xylose isomerase accounted for 40% of the total protein content. As a result of one-stage purification by affinity chromatography, a protein preparation of 90% purity was obtained. The recombinant enzyme catalyzed the isomerization of glucose to fructose and exhibited maximum activity (0.8 U/mg) at 45°C and pH 6.8. The enzyme required Mg²⁺ ions as a cofactor. When Mg²⁺ and Co²⁺ ions were simultaneously present in the reaction medium, the enzyme activity increased by 15–20%. Complete replacement of Mg²⁺ with Co²⁺ decreased the enzyme activity. In the presence of Ca²⁺ at concentrations comparable to the concentration of Mg²⁺, the enzyme was not inhibited, although published data reported inhibition of similar enzymes by Ca²⁺. The recombinant enzyme exhibited a very low thermostability: it underwent a slow inactivation when incubated at 45°C and was completely inactivated after incubation at 65°C for 1 h.     

Hyperthermostable <Emphasis Type="Italic">Thermotoga maritima</Emphasis> xylanase XYN10B shows high activity at high temperatures in the presence of biomass-dissolving hydrophilic ionic liquids

The gene of Thermotoga maritima GH10 xylanase (TmXYN10B) was synthesised to study the extreme limits of this hyperthermostable enzyme at high temperatures in the presence of biomass-dissolving hydrophilic ionic liquids (ILs). TmXYN10B expressed from Pichia pastoris showed maximal activity at 100 °C and retained 92 % of maximal activity at 105 °C in a 30-min assay. Although the temperature optimum of activity was lowered by 1-ethyl-3-methylimidazolium acetate ([EMIM]OAc), TmXYN10B retained partial activity in 15–35 % hydrophilic ILs, even at 75–90 °C. TmXYN10B retained over 80 % of its activity at 90 °C in 15 % [EMIM]OAc and 15–25 % 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM]DMP) during 22-h reactions. [EMIM]OAc may rigidify the enzyme and lower V _max. However, only minor changes in kinetic parameter K _m showed that competitive inhibition by [EMIM]OAc of TmXYN10B is minimal. In conclusion, when extended enzymatic reactions under extreme conditions are required, TmXYN10B shows extraordinary potential.     

Optimized expression of prolyl aminopeptidase in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and its characteristics after glycosylation

Prolyl aminopeptidases are specific exopeptidases that catalyze the hydrolysis of the N-terminus proline residue of peptides and proteins. In the present study, the prolyl aminopeptidase gene (pap) from Aspergillus oryzae JN-412 was optimized through the codon usage of Pichia pastoris. Both the native and optimized pap genes were inserted into the expression vector pPIC9 K and were successfully expressed in P. pastoris. Additionally, the activity of the intracellular enzyme expressed by the recombinant optimized pap gene reached 61.26 U mL^?1, an activity that is 2.1-fold higher than that of the native gene. The recombinant enzyme was purified by one-step elution through Ni-affinity chromatography. The optimal temperature and pH of the purified PAP were 60 °C and 7.5, respectively. Additionally, the recombinant PAP was recovered at a yield greater than 65 % at an extremely broad range of pH values from 6 to 10 after treatment at 50 °C for 6 h. The molecular weight of the recombinant PAP decreased from 50 kDa to 48 kDa after treatment with a deglycosylation enzyme, indicating that the recombinant PAP was completely glycosylated. The glycosylated PAP exhibited high thermo-stability. Half of the activity remained after incubation at 50 °C for 50 h, whereas the remaining activity of PAP expressed in E. coli was only 10 % after incubation at 50 °C for 1 h. PAP could be activated by the appropriate salt concentration and exhibited salt tolerance against NaCl at a concentration up to 5 mol L^?1.     

Single point mutations enhance activity of <Emphasis Type="Italic">cis</Emphasis>-epoxysuccinate hydrolase

Objectives

To enhance activity of cis-epoxysuccinate hydrolase from Klebsiella sp. BK-58 for converting cis-epoxysuccinate to tartrate.

Results

By semi-saturation mutagenesis, all the mutants of the six important conserved residues almost completely lost activity. Then random mutation by error-prone PCR and high throughput screening were further performed to screen higher activity enzyme. We obtained a positive mutant F10D after screening 6000 mutations. Saturation mutagenesis on residues Phe10 showed that most of mutants exhibited higher activity than the wild-type, and the highest mutant was F10Q with activity of 812 U mg^?1 (k _cat /K _m , 9.8 ± 0.1 mM^?1 s^?1), which was 230 % higher than that of wild-type enzyme 355 U mg^?1 (k _cat /K _m , 5.3 ± 0.1 mM^?1 s^?1). However, the thermostability of the mutant F10Q slightly decreased.

Conclusions

The catalytic activity of a cis-epoxysuccinate hydrolase was efficient improved by a single mutation F10Q and Phe10 might play an important role in the catalysis.

     

Purification and characterization of polygalacturonase produced by thermophilic <Emphasis Type="Italic">Thermoascus aurantiacus</Emphasis> CBMAI-756 in submerged fermentation

An extracellular polygalacturonase was isolated from 5-day culture filtrates of Thermoascus aurantiacus CBMAI-756 and purified by gel filtration and ion-exchange chromatography. The enzyme was maximally active at pH 5.5 and 60–65°C. The apparent K _m with citrus pectin was 1.46 mg/ml and the V _max was 2433.3 μmol/min/mg. The apparent molecular weight of the enzyme was 30 kDa. The enzyme was 100% stable at 50°C for 1 h and showed a half-life of 10 min at 60°C. Polygalacturonase was stable at pH 5.0–5.5 and maintained 33% of initial activity at pH 9.0. Metal ions, such as Zn⁺², Mn⁺², and Hg⁺², inhibited 50, 75 and 100% of enzyme activity. The purified polygalacturonase was shown to be an endo/exo-enzyme, releasing mono, di and tri-galacturonic acids within 10 min of hydrolysis.     

Characterization of the biochemical properties of recombinant Xyn10C from a marine bacterium, <Emphasis Type="Italic">Saccharophagus degradans</Emphasis> 2-40

Endo-1,4-β-xylanases are mostly classified into glycoside hydrolase (GH) family 10 or 11. In this study, we examined the catalytic functions of a recombinant endo-1,4-β-xylanase belonging to GH10 (Xyn10C) from a marine bacterium, Saccharophagus degradans 2-40. Optimal activity of this enzyme was evident at 30 °C and pH 7.0, but activity remained even at low temperatures, indicating its adaptation to cold. With respect to other xylanases known to be active in cold temperatures, Xyn10C is unique in that it showed maximal activity in the presence of 2 M of NaCl. The action patterns of recombinant Xyn10C on xylans from hardwood and softwood differed in part, but the enzyme hydrolyzed polysaccharidic substrates primarily to xylobiose and xylotriose through xylo-oligosaccharides, releasing a small amount of xylose. The K _m and V _max values on birchwood xylan were 10.4 mg mL^?1 and 253 µmol mg^?1 min^?1, respectively. The efficient catalytic function of Xyn10C on short-length xylo-oligosaccharide chains was similar to the typical function of other known GH10 xylanases.     

Molecular Cloning,Expression and Characterization of Pectin Methylesterase (<Emphasis Type="Italic">Ct</Emphasis>PME) from <Emphasis Type="Italic">Clostridium thermocellum</Emphasis>

Many phytopathogenic micro-organisms such as bacteria and fungi produce pectin methylesterases (PME) during plant invasion. Plants and insects also produce PME to degrade plant cell wall. In the present study, a thermostable pectin methylesterase (CtPME) from Clostridium thermocellum belonging to family 8 carbohydrate esterase (CE8) was cloned, expressed and purified. The amino acid sequence of CtPME exhibited similarity with pectin methylesterase from Erwinia chrysanthemi with 38% identity. The gene encoding CtPME was cloned into pET28a(+) vector and expressed using Escherichia coli BL21(DE3) cells. The recombinant CtPME expressed as a soluble protein and exhibited a single band of molecular mass approximately 35.2 kDa on SDS-PAGE gels. The molecular mass, 35.5 kDa of the enzyme, was also confirmed by MALDI-TOF MS analysis. Notably, highest protein concentration (11.4 mg/mL) of CtPME was achieved in auto-induction medium, as compared with LB medium (1.5 mg/mL). CtPME showed maximum activity (18.1 U/mg) against citrus pectin with >85% methyl esterification. The optimum pH and temperature for activity of CtPME were 8.5 and 50 °C, respectively. The enzyme was stable in pH range 8.0–9.0 and thermostable between 45 and 70 °C. CtPME activity was increased by 40% by 5 mM Ca²⁺ or Mg²⁺ ions. Protein melting curve of CtPME gave a peak at 80 °C. The peak was shifted to 85 °C in the presence of 5 mM Ca²⁺ ions, and the addition of 5 mM EDTA shifted back the melting peak to 80 °C. CtPME can be potentially used in food and textile industry applications.     

Gene cloning and characterization of recombinant L-Asparaginase from <Emphasis Type="Italic">Bacillus subtilis</Emphasis> strain R5

L-asparaginase gene from Bacillus subtilis strain R5 (Asn-R5), comprising 990 nucleotides corresponding to a polypeptide of 329 amino acids, was cloned and expressed in Escherichia coli. Recombinant Asn-R5 was produced in soluble and active form exhibiting a specific activity of 223 μmol min^?1 mg^?1. The optimal temperature and pH for L-asparaginase activity of Asn-R5 were 35 °C and 9.0, respectively. Asn-R5 displayed a 50% activity with D-asparagine and 2% with L-glutamine compared to 100% with L-asparagine. No activity could be detected when D-glutamine was used as substrate. Half-life of the enzyme was 180 min at 35 °C and 40 min at 50 °C. There was no effect of metal ions and EDTA on the activity indicating that Asn-R5 enzyme activity is not metal ion dependent. The K_m and V_max values were 2.4 mM and 265 μmol min^?1 mg^?1, respectively. Activation energy for reaction catalyzed by Asn-R5 was 28 kJ mol^?1. High L-asparaginase activity and thermostability of recombinant Asn-R5 may be beneficial for industrial production and application.     

Specific mutation of transglutaminase gene from <Emphasis Type="Italic">Streptomyces hygroscopicus</Emphasis> H197 and characterization of microbial transglutaminase

Microbial transglutaminase (MTG) gene (mtg) from Streptomyces hygroscopicus H197 strain was cloned by PCR and mutated by deleting a specific 84 bp fragment using overlapping extension PCR. The mutant MTG and the wild MTG genes expressed by recombinant plasmid pET32a⁺-mutant mtg and pET32a⁺-mtg, respectively, and were harvested by alternating freeze–thaw steps and purified by Ni column. The purified mutant MTG and the wild MTG exhibited 0.22 U/mg and 0.16 U/mg activity, respectively, and 0.69 U/mg and 0.54 U/mg activity, respectively, after activated by trypsin. The molecular weight of mutant MTG was estimated as 67 kDa by SDS-PAGE. Both MTGs showed optimum activity at pH 6–8 for hydroxamate formation from N-CBZ-Gln-Gly and hydroxylamine, and exhibited higher stability at 40°C and 1–3% salinity. The two types of MTG were not stable in the presence of Zn(II), Cu(II), Hg(II), Pb(II), Fe(III), and Ag(I), suggesting that they could possess a thiol group. In addition, the mutant MTG and the wild MTG were strongly affected by ethanol. Furthermore, the mutant MTG was obviously (P < 0.05 or P < 0.01) more stable than the wild MTG at 50°C and 60°C, at pH 4, 5, and 9, at 7% and 9% salinity, 30% and 35% ethanol concentration, and in the presence of Li(I) and Ag(I). The polyhydroxy compounds as protein stabilizers could elevate MTG stability.     

Purification and Characterization of Exo-Inulinase from <Emphasis Type="Italic">Paenibacillus</Emphasis> sp. d9 Strain

This study intended to purify and characterise exo-inulinase of diesel-degrading Paenibacillus sp. D9. The whole genome sequencing of Paenibacillus sp. D9 revealed to possess the sacC gene that is encoded as exo-inulinase/levanase. This isolate was capable of producing a maximum of 50.9 IU/mL of exo-inulinase activity within 3 days at 30?°C, 200 rpm and pH of 7.0 on minimal salt medium agar supplemented with 1% (w/v) inulin. An exo-inulinase of 58.5 kDa was purified using ammonium sulphate precipitation, HiTrap QFF column and MMC column chromatographies with a specific activity of 4333 IU/mg, 7.1% recovery and a 4.3-fold increase in purity. The purified D9 exo-inulinase had temperature and pH optimum at 40?°C and pH 4.0, respectively, with the Michaelis constant of 5.5 mM and a maximal velocity of 476.2 IU/mg, respectively. Catalytic constant, k _cat was calculated to be 42.6 s^?1 with a catalytic efficiency (k _cat /K _m ) of 7.6 s^?1 mM^?1. The presence of Ca²⁺ enhanced the activity of D9 exo-inulinase while Hg²⁺ completely inhibited the activity, other compounds such as Fe³⁺ and Cu²⁺ had an inhibitory effect. The results of amino acid alignment and the complete degradation of inulin into fructose by the purified enzyme confirmed that inulinase from Paenibacillus sp. D9 is an exo-form. The phylogenetic tree based on the protein sequences indicates that bacterial exo-inulinases possess a common ancestry.     

Oxygen transfer as a tool for fine-tuning recombinant protein production by <Emphasis Type="Italic">Pichia pastoris</Emphasis> under glyceraldehyde-3-phosphate dehydrogenase promoter

Effects of oxygen transfer on recombinant protein production by Pichia pastoris under glyceraldehyde-3-phosphate dehydrogenase promoter were investigated. Recombinant glucose isomerase was chosen as the model protein. Two groups of oxygen transfer strategies were applied, one of which was based on constant oxygen transfer rate where aeration rate was Q _O/V = 3 and 10 vvm, and agitation rate was N = 900 min^?1; while the other one was based on constant dissolved oxygen concentrations, C _DO = 5, 10, 15, 20 and 40 % in the fermentation broth, by using predetermined exponential glucose feeding with μ _o = 0.15 h^?1. The highest cell concentration was obtained as 44 g L^?1 at t = 9 h of the glucose fed-batch phase at C _DO = 20 % operation while the highest volumetric and specific enzyme activities were obtained as 4440 U L^?1 and 126 U g^?1 cell, respectively at C _DO = 15 % operation. Investigation of specific enzyme activities revealed that keeping C _DO at 15 % was more advantageous with an expense of relatively higher by-product formation and lower specific cell growth rate. For this strategy, the highest oxygen transfer coefficient and oxygen uptake rate were K _L a = 0.045 s^?1 and OUR = 8.91 mmol m^?3 s^?1, respectively.     

Deciphering the mode of action,structural and biochemical analysis of heparinase II/III (<Emphasis Type="Italic">Ps</Emphasis>PL12a) a new member of family 12 polysaccharide lyase from <Emphasis Type="Italic">Pseudopedobacter saltans</Emphasis>

Heparinases are widely used for production of clinically and therapeutically important bioactive oligosaccharides and in analyzing the polydisperse, heterogeneous, and complex structures of heparin/heparan sulfate. In the present study, the gene (1911 bp) encoding heparinase II/III of family 12 polysaccharide lyase (PsPL12a) from Pseudopedobacter saltans was cloned, expressed, and biochemically and functionally characterized. The purified enzyme PsPL12a of molecular size approximately 76 kDa exhibited maximum activity in the temperature range 45–50 °C and at pH 6.0. PsPL12a gave maximum activity at 1% (w/v) heparin under optimum conditions. The kinetic parameters, K _m and V_max, for PsPL12a were 4.6?±?0.5 mg/ml and 70?±?2 U/mg, respectively. Ten millimolars of each Mg²⁺ and Mn²⁺ ions enhanced PsPL12a activity by 80%, whereas Ni²⁺ inhibited by 75% and Co²⁺ by 10%, and EDTA completely inactivated the enzyme. Protein melting curve of PsPL12a gave a single peak at 55 °C and 10 mM Mg²⁺ ions and shifted the peak to 60 °C. The secondary structure analysis of PsPL12a by CD showed 65.12% α-helix, 11.84% β-strand, and 23.04% random coil. The degradation products of heparin by PsPL12a analyzed by ESI-MS spectra displayed peaks corresponding to heparin di-, tetra-, penta-, and hexa-saccharides revealing the endolytic mode of enzyme action. Heparinase II/III (PsPL12a) from P. saltans can be used for production of low molecular weight heparin oligosaccharides for their utilization as anticoagulants. This is the first report on heparinase cloned from P. saltans.     

Characterization of aspartate kinase and homoserine dehydrogenase from <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> IWJ001 and systematic investigation of <Emphasis Type="SmallCaps">l</Emphasis>-isoleucine biosynthesis

Previously we have characterized a threonine dehydratase mutant TD^F383V (encoded by ilvA1) and an acetohydroxy acid synthase mutant AHAS^{P176S, D426E, L575W} (encoded by ilvBN1) in Corynebacterium glutamicum IWJ001, one of the best l-isoleucine producing strains. Here, we further characterized an aspartate kinase mutant AK^A279T (encoded by lysC1) and a homoserine dehydrogenase mutant HD^G378S (encoded by hom1) in IWJ001, and analyzed the consequences of all these mutant enzymes on amino acids production in the wild type background. In vitro enzyme tests confirmed that AK^A279T is completely resistant to feed-back inhibition by l-threonine and l-lysine, and that HD^G378S is partially resistant to l-threonine with the half maximal inhibitory concentration between 12 and 14 mM. In C. glutamicum ATCC13869, expressing lysC1 alone led to exclusive l-lysine accumulation, co-expressing hom1 and thrB1 with lysC1 shifted partial carbon flux from l-lysine (decreased by 50.1 %) to l-threonine (4.85 g/L) with minor l-isoleucine and no l-homoserine accumulation, further co-expressing ilvA1 completely depleted l-threonine and strongly shifted carbon flux from l-lysine (decreased by 83.0 %) to l-isoleucine (3.53 g/L). The results demonstrated the strongly feed-back resistant TD^F383V might be the main driving force for l-isoleucine over-synthesis in this case, and the partially feed-back resistant HD^G378S might prevent the accumulation of toxic intermediates. Information exploited from such mutation-bred production strain would be useful for metabolic engineering.     

<Emphasis Type="Italic">Deinococcus knuensis</Emphasis> sp. nov., a bacterium isolated from river water

Strain 16F3H^T, a Gram-negative, aerobic, non-motile, and oval-shaped bacterium, was isolated from river water collected from the Han River in South Korea. Growth of strain 16F3H^T was observed at 10–42 °C (optimum at 25–30 °C), but no growth occurred at 4 °C. The strain is able to grow at pH 4–10 (optimum at pH 7–8) and tolerates up to 4% NaCl (w/v), with optimum growth at 0.5% NaCl. The isolate was found to be resistant to UV irradiation. Based on 16S rRNA gene sequence analysis, it is closely related to ‘Deinococcus seoulensis’ 16F1E (98.8%), Deinococcus aquaticus PB314^T (98.1%) and Deinococcus caeni Ho-08^T (98.0%). The level of DNA–DNA homology between the novel strain and the three related strains was 57.4, 41.2, and 35.8%, respectively. Chemotaxonomic data revealed that strain 16F3H^T possesses MK-8 as the predominant respiratory quinone, an unidentified phosphoglycolipid as the major polar lipid, and C_15:1 ω6c and C_16:1 ω7c as the major fatty acids. The DNA G + C content was determined to be 65.7 mol%. Based on polyphasic evidence, strain 16F3H^T (=KCTC 33794^T = JCM 31406^T) should be classified as the type strain of a novel Deinococcus species, for which the name Deinococcus knuensis sp. nov. is proposed.     

Cloning,expression and characterization of a novel cold-active and organic solvent-tolerant esterase from <Emphasis Type="Italic">Monascus ruber</Emphasis> M7

Cold active esterases are a class of important biocatalysts that exhibit high activity at low temperatures. In this study, a search for putative cold-active esterase encoding genes from Monascus ruber M7 was performed. A cold-active esterase, named Lip10, was isolated, cloned, purified, and characterized. Amino acid sequence analysis reveals that Lip10 contained a conserved sequence motif Gly¹⁷³-Xaa-Ser¹⁷⁵-Xaa-Gly¹⁷⁷ that is also present in the majority of esterases and lipases. Phylogenetic analysis indicated that Lip10 was a novel microbial esterase. The lip10 gene was cloned and heterologously expressed in Escherichia coli BL21(DE3), resulting in the expression of an active and soluble protein that constituted 40 % of the total cell protein content. Lip10 maintained almost 50 % of its maximal activity at 4–10 °C, with optimal activity at 40 °C. Furthermore, Lip10 retained 184–216 % of its original activity, after incubation in 50 % (v/v) hydrophobic organic solvents for 24 h. The enzyme also exhibited high activity under alkaline conditions and good tolerance to metal ions in the reaction mixture. These results indicate that Lip10 may have potential uses in chemical synthesis and food processing industrial applications as an esterase.     

Production,characteristics and applications of phytase from a rhizosphere isolated <Emphasis Type="Italic">Enterobacter</Emphasis> sp. ACSS

Optimization of process parameters for phytase production by Enterobacter sp. ACSS led to a 4.6-fold improvement in submerged fermentation, which was enhanced further in fed-batch fermentation. The purified 62 kDa monomeric phytase was optimally active at pH 2.5 and 60 °C and retained activity over a wide range of temperature (40–80 °C) and pH (2.0–6.0) with a half-life of 11.3 min at 80 °C. The kinetic parameters K _m, V _max, K _cat, and K _cat/K _m of the pure phytase were 0.21 mM, 131.58 nmol mg^?1 s^?1, 1.64 × 10³ s^?1, and 7.81 × 10⁶ M^?1 s^?1, respectively. The enzyme was fairly stable in the presence of pepsin under physiological conditions. It was stimulated by Ca⁺², Mg⁺² and Mn⁺², but inhibited by Zn⁺², Cu⁺², Fe⁺², Pb⁺², Ba⁺² and surfactants. The enzyme can be applied in dephytinizing animal feeds, and the baking industry.     

<Emphasis Type="Italic">Plectosphaerella cucumerina</Emphasis> as a bioherbicide for <Emphasis Type="Italic">Cirsium arvense</Emphasis>: proof of concept

Plectosphaerella cucumerina (Lindf.) W. Gams was evaluated as a bioherbicide for Cirsium arvense L. (Scop.) using a Canadian and a New Zealand isolate. Both isolates defoliated C. arvense when applied at 10¹³ conidia ha^?1 in water volumes ranging from 250 to 6400 l ha^?1 with a rapid decline in effect with declining conidial dose. Repeat application and the addition of the adjuvant Pulse^® penetrant to the conidial suspension increased the disease severity in C. arvense. Maximum disease occurred at 20 °C with a 48 h post-application dew period. The experiments demonstrate that P. cucumerina can defoliate C. arvense under the environmental conditions of temperate pastures where the weed is problematic. The results also show that modifications to formulation and strategic application may reduce the 48 h dew period requirement and risk to non-target species respectively, supporting the conclusion that the fungus has potential as a bioherbicide for C. arvense.     

Biochemical characterization and structural analysis of a new cold-active and salt-tolerant esterase from the marine bacterium <Emphasis Type="Italic">Thalassospira</Emphasis> sp.

A gene encoding an esterase, ThaEst2349, was identified in the marine psychrophilic bacterium Thalassospira sp. GB04J01. The gene was cloned and overexpressed in E. coli as a His-tagged fusion protein. The recombinant enzyme showed optimal activity at 45 °C and the thermal stability displayed a retention of 75 % relative activity at 40 °C after 2 h. The optimal pH was 8.5 but the enzyme kept more than 75 % of its maximal activity between pH 8.0 and 9.5. ThaEst2349 also showed remarkable tolerance towards high concentrations of salt and it was active against short-chain p-nitrophenyl esters, displaying optimal activity with the acetate. The enzyme was tested for tolerance of organic solvents and the results are suggesting that it could function as an interesting candidate for biotechnological applications. The crystal structure of ThaEst2349 was determined to 1.69 Å revealing an asymmetric unit containing two chains, which also is the biological unit. The structure has a characteristic cap domain and a catalytic triad comprising Ser158, His285 and Asp255. To explain the cold-active nature of the enzyme, we compared it against thermophilic counterparts. Our hypothesis is that a high methionine content, less hydrogen bonds and less ion pairs render the enzyme more flexible at low temperatures.