Bisource carbon dioxide feeding of the photosynthetic process of microalgae autotrophic cultivation

The mechanism of carbon dioxide saturation of alkaline nutrient medium for the purpose of autotrophic cultivation of microalgae is studied. Carbon dioxide desorption from aqueous solutions of sodium hydrocarbonate is investigated and the influence of chemical equilibria in the solutions on the cultivation of carbon dioxide supply is discussed. It is pointed out that these solutions can be considered to be carriers of the assimilable carbon source for the microalgae cultivation, most efficient at pH 8.5. A comparative estimation of the carbon dioxide and the hydrocarbonic ion as assimilable components of the chemical equilibria under study was done, leading to the conclusion that the more probable component in an alkaline medium autotrophic microalgae cultivation is carbon dioxide. A scheme of bisource feeding of the photosynthetic process, with carbon dioxide for the autotrophic microalgae cultivation in a alkaline nutrient medium, providing a stable and economical cultivation process, is proposed.     

Development of thin-film photo-bioreactor and its application to outdoor culture of microalgae

Photosynthetic microalgae have received much attention as a microbial source of diverse useful biomaterials through CO₂ fixation and various types of photo-bioreactors have been developed for efficient microalgal cultivation. Herein, we developed a novel thin-film photo-bioreactor, which was made of cast polypropylene film, considering outdoor mass cultivation. To develop optimal design of photo-bioreactor, we tested performance of three shapes of thin-film photo-bioreactors (flat, horizontal and vertical tubular shapes) and various parts in the bioreactor. Collectively, vertical tubular bioreactor with H/D ratio 6:1 and cylindrical stainless steel spargers showed the most outstanding performance. Furthermore, the photo-bioreactor was successfully applied to the cultivation of other microalgae such as Chlamydomonas reinhardtii and Chlorella vulgaris. The scalability of photo-bioreactor was confirmed by gradually increasing culture volume from 4 to 25 L and the biomass productivity of each reactor was quite consistent (0.05–0.07 g/L/day) during the cultivation of H. pluvialis under indoor and outdoor conditions. Especially, we also achieved dry cell weight of 4.64 g/L and astaxanthin yield of 218.16 mg/L through long-term cultivation (100 days) under outdoor condition in 15 L photo-bioreactor using Haematococcus pluvialis, which means that the astaxanthin yield from outdoor cultivation is equal or superior to that obtained from controlled indoor condition. Therefore, these results indicate that we can apply this approach to development of optimal photo-bioreactor for the large-scale culture of microalgae and production of useful biomaterials under outdoor condition.     

Ultrahigh-cell-density heterotrophic cultivation of the unicellular green microalga Scenedesmus acuminatus and application of the cells to photoautotrophic culture enhance biomass and lipid production

Although production of biodiesels from microalgae is proved to be technically feasible, a commercially viable system has yet to emerge. High-cell-density fermentation of microalgae can be coupled with photoautotrophic cultivation to produce oils. In this study, by optimizing culturing conditions and employing a sophisticated substrate feed control strategy, ultrahigh-cell-density of 286 and 283.5 g/L was achieved for the unicellular alga Scenedesmus acuminatus grown in 7.5-L bench-scale and 1,000-L pilot-scale fermenters, respectively. The outdoor scale-up experiments indicated that heterotrophically grown S. acuminatus cells are more productive in terms of both biomass and lipid accumulation when they are inoculated in photobioreactors for lipid production as compared to the cells originally grown under photoautotrophic conditions. Technoeconomic analysis based on the pilot-scale data indicated that the cost of heterotrophic cultivation of microalgae for biomass production is comparable with that of the open-pond system and much lower than that of tubular PBR, if the biomass yield was higher than 200 g/L. This study demonstrated the economic viability of heterotrophic cultivation on large-scale microalgal inocula production, but ultrahigh-productivity fermentation is a prerequisite. Moreover, the advantages of the combined heterotrophic and photoautotrophic cultivation of microalgae for biofuels production were also verified in the pilot-scale.     

Microalgae biotechnology in Nordic countries – the potential of local strains

Climate change, energy use and food security are the main challenges that our society is facing nowadays. Biofuels and feedstock from microalgae can be part of the solution if high and continuous production is to be ensured. This could be attained in year‐round, low cost, outdoor cultivation systems using strains that are not only champion producers of desired compounds but also have robust growth in a dynamic climate. Using microalgae strains adapted to the local conditions may be advantageous particularly in Nordic countries. Here, we review the current status of laboratory and outdoor‐scale cultivation in Nordic conditions of local strains for biofuel, high‐value compounds and water remediation. Strains suitable for biotechnological purposes were identified from the large and diverse pool represented by saline (NE Atlantic Ocean), brackish (Baltic Sea) and fresh water (lakes and rivers) sources. Energy‐efficient annual rotation for cultivation of strains well adapted to Nordic climate has the potential to provide high biomass yields for biotechnological purposes.     

Biological constraints in algal biotechnology

In the past decade, considerable progress has been made in developing the appropriate biotechnology for microalgal mass cultivation aimed at establishing a new agro-industry. This review points out the main biological constraints affecting algal biotechnology outdoors and the requirements for making this biotechnology economically viable. One of them is the availability of a wide variety of algal species and improved strains that favorably respond to varying environmental conditions existing outdoors. It is thus just a matter of time and effort before a new methodology like genetic engineering can and will be applied in this field as well. The study of stress physiology and adaptation of microalgae has also an important application in further development of the biotechnology for mass culturing of microalgae. In outdoor cultures, cells are exposed to severe changes in light and temperature much faster than the time scale required for the cells to acclimate. A better understanding of those parameters and the ability to rapidly monitor those conditions will provide the growers with a better knowledge on how to optimize growth and productivity. Induction of accumulation of high value products is associated with stress conditions. Understanding the physiological response may help in providing a better production system for the desired product and, at a later stage, give an insight of the potential for genetic modification of desired strains. The potential use of microalgae as part of a biological system for bioremediation/detoxification and wastewater treatment is also associated with growing the cells under stress conditions. Important developments in monitoring and feedback control of the culture behavior through application of on-line chlorophyll fluorescence technique are in progress. Understanding the process associated with those unique environmental conditions may help in choosing the right culture conditions as well as selecting strains in order to improve the efficiency of the biological process.     

Developments and perspectives of photobioreactors for biofuel production

The production of biofuels from microalgae requires efficient photobioreactors in order to meet the tight constraints of energy efficiency and economic profitability. Current cultivation systems are designed for high-value products rather than for mass production of cheap energy carriers. Future bioreactors will imply innovative solutions in terms of energy efficiency, light and gas transfer or attainable biomass concentration to lower the energy demand and cut down production costs. A new generation of highly developed reactor designs demonstrates the enormous potential of photobioreactors. However, a net energy production with microalgae remains challenging. Therefore, it is essential to review all aspects and production steps for optimization potential. This includes a custom process design according to production organism, desired product and production site. Moreover, the potential of microalgae to synthesize valuable products additionally to the energetic use can be integrated into a production concept as well as waste streams for carbon supply or temperature control.     

利用微藻固定CO2实现碳减排的研究进展

CO2减排是目前社会经济发展所面临的重大环境问题之一,如何高效、绿色地进行减排已成为各国科研工作者关注与研究的热点。利用微藻技术进行减排符合碳循环规律,显示出很好的应用前景。本文结合笔者近年在利用微藻技术进行碳减排方面的研究工作,从固定CO2的微藻选育、微藻的培养、微藻减排在光生物反应器方面的开发以及CO2减排与污水深度处理及高价值生物质生产的耦合等4个方面对近些年来国内外在利用微藻技术实现CO2减排方面的研究情况进行了归纳与评述,并对前景进行了展望。     

废水培养微藻藻种遴选及其组分积累的研究进展

利用废水培养微藻能够降低微藻的培养成本,同时削减污染.微藻的蛋白质、多糖和油脂等组分是影响其后续资源化利用的重要因素.本文重点综述了以废水为基质培养微藻的研究进展,从组分积累的角度,分析了微藻种类的选择依据,探讨了影响微藻生长的因素和提高产量的方法,并对藻体中组分的合成机制进行了讨论,提出未来废水培养微藻技术面临的挑战...     

Membrane technology in microalgae cultivation and harvesting: A review

Membrane processes have long been applied in different stages of microalgae cultivation and processing. These processes include microfiltration, ultrafiltration, dialysis, forward osmosis, membrane contactors and membrane spargers. They are implemented in many combinations, both as a standalone and as a coupled system (in membrane biomass retention photobioreactors (BR-MPBRs) or membrane carbonation photobioreactors (C-MPBRs). To provide sufficient background on these applications, an overview of membrane materials and membrane processes of interest in microalgae cultivation and processing is provided in this work first. Afterwards, discussion about specific aspects of membrane applications in microbial cultivation and harvesting is provided, including membrane fouling. Many of the membrane processes were shown to be promising options in microalgae cultivation. Yet, significant process optimizations are still required when they are applied to enable microalgae biomass bulk production to become competitive as a raw material for biofuel production. Recent developments of the coupled systems (BR-MPBR and C-MPBR) bring significant promises to improve the volumetric productivity of a cultivation system and the efficiency of inorganic carbon capture, respectively.     

Microalgae bulk growth model with application to industrial scale systems

The scalability of microalgae growth systems is a primary research topic in anticipation of the commercialization of microalgae-based biofuels. To date, there is little published data on the productivity of microalgae in growth systems that are scalable to commercially viable footprints. To inform the development of more detailed assessments of industrial-scale microalgae biofuel processes, this paper presents the construction and validation of a model of microalgae biomass and lipid accumulation in an outdoor, industrial-scale photobioreactor. The model incorporates a time-resolved simulation of microalgae growth and lipid accumulation based on solar irradiation, species specific characteristics, and photobioreactor geometry. The model is validated with 9 weeks of growth data from an industrially-scaled outdoor photobioreactor. Discussion focuses on the sensitivity of the model input parameters, a comparison of predicted microalgae productivity to the literature, and an analysis of the implications of this more detailed growth model on microalgae biofuels lifecycle assessment studies.     

Modeling microalgae cultivation productivities in different geographic locations - estimation method for idealized photobioreactors

Microalgae can be used to produce versatile high-value fuels, such as methane, biodiesel, ethanol, or hydrogen gas. One of the most important factors that influence the economics of microalgae cultivation is the primary production of biomass per unit area. This is determined by productivity rates during cultivation, which are influenced by the local climate conditions (solar irradiation, temperature). To compare locations in different climate regions for microalgae cultivation, a mathematical model for an idealized closed photobioreactor was developed. The applied growth kinetics were based on theoretical maximum photon-conversion efficiencies (for the conversion of solar energy to chemical energy in the form of biomass). Known or estimated temperature effects for different algal strains were incorporated. The model was used to calculate hourly average areal productivity rates as well as annual primary production values under local conditions at seven example locations. Here, hourly weather data (solar irradiance and air temperature) were taken into account. According to these model calculations, maximum annual yields were achieved in regions with high irradiation and temperature patterns in or near the optimum range of the specific algal strain (here, desert and equatorial humid climates). The developed model can be used as a tool to assess and compare individual locations for microalgae cultivation.     

Heterotrophic production of eicosapentaenoic acid by microalgae

Eicosapentaenoic acid (EPA) is an omega-3 polyunsaturated fatty acid that plays an important role in the regulation of biological functions and prevention and treatment of a number of human diseases such as heart and inflammatory diseases. As fish oil fails to meet the increasing demand for purified EPA, alternative sources are being sought. Microalgae contain large quantities of high-quality EPA and they are considered a potential source of this important fatty acid. Some microalgae can be grown heterotrophically on cheap organic substrate without light. This mode of cultivation can be well controlled and provides the possibility to maximize EPA production on a large scale. Numerous strategies have been investigated for commercial production of EPA by microalgae. These include screening of high EPA-yielding microalgal strains, improvement of strains by genetic manipulation, optimization of culture conditions, and development of efficient cultivation systems. This paper reviews recent advances in heterotrophic production of EPA by microalgae with an emphasis on the use of diatoms as producing organisms.     

Effects of bacterial communities on biofuel-producing microalgae: stimulation,inhibition and harvesting

Despite the great interest in microalgae as a potential source of biofuel to substitute for fossil fuels, little information is available on the effects of bacterial symbionts in mass algal cultivation systems. The bacterial communities associated with microalgae are a crucial factor in the process of microalgal biomass and lipid production and may stimulate or inhibit growth of biofuel-producing microalgae. In addition, we discuss here the potential use of bacteria to harvest biofuel-producing microalgae. We propose that aggregation of microalgae by bacteria to achieve >90% reductions in volume followed by centrifugation could be an economic approach for harvesting of biofuel-producing microalgae. Our aims in this review are to promote understanding of the effects of bacterial communities on microalgae and draw attention to the importance of this topic in the microalgal biofuel field.     

Optimization of pH induced flocculation of marine and freshwater microalgae via central composite design

Microalgae harvesting via pH induced flocculation along with utilization of recovered medium after flocculation is one of the most economical methods for separating the microalgal biomass in order to reduce the dewatering cost. In this study, optimization of marine and freshwater microalgae flocculation by pH adjustment was investigated via central composite design methodology. One molar of KOH and NaOH solutions were used to increase the pH level of the microalgal culture. Increasing pH value of the medium provided the highest flocculation efficiency up to 92.63 and 86.18% with pH adjusted to 10.5 with KOH and NaOH solutions for marine microalgae Nannochloropsis oculata and freshwater microalgae Chlorella minutissima, respectively. Also, it was revealed that microalgae cells were still alive after flocculation process and their biochemical composition was not changed, and flocculated medium can be used again for the next microalgal production. According to the results, it can be said that this method is cheap and effective, simple to operate and provides the utilization of flocculated medium again.     

光生物反应器培养微藻研究进展

微藻具有固定CO2和净化有机废水的能力,在环保、食品饲（饵）料、医药和生物能源开发等领域备受关注,但规模化培养及其产业化仍是研究的难点,亟待解决。就常用于大规模培养微藻的光生物反应器的特点和结构进行了综述。其中,封闭式微藻光生物反应器能够较好地调控藻种的培养条件、不易遭受污染,藻种的纯度容易控制,但培养规模小,生产成本较高;而开放式微藻光生物反应器无法精确控制藻种生长环境,但生产规模大、产量高、生产成本低,因此应用广泛。最佳的方法是综合两者优点,即首先利用封闭式微藻光生物反应器进行中试放大,大量繁殖藻种,然后投入开放式微藻光生物反应器内进行大规模商业生产,此方法有望成为微藻光生物反应器的发展方向,以期为微藻大规模培养提供参考借鉴。     

Isolation and evaluation of oil-producing microalgae from subtropical coastal and brackish waters

Microalgae have been widely reported as a promising source of biofuels, mainly based on their high areal productivity of biomass and lipids as triacylglycerides and the possibility for cultivation on non-arable land. The isolation and selection of suitable strains that are robust and display high growth and lipid accumulation rates is an important prerequisite for their successful cultivation as a bioenergy source, a process that can be compared to the initial selection and domestication of agricultural crops. We developed standard protocols for the isolation and cultivation for a range of marine and brackish microalgae. By comparing growth rates and lipid productivity, we assessed the potential of subtropical coastal and brackish microalgae for the production of biodiesel and other oil-based bioproducts. This study identified Nannochloropsis sp., Dunaniella salina and new isolates of Chlorella sp. and Tetraselmis sp. as suitable candidates for a multiple-product algae crop. We conclude that subtropical coastal microalgae display a variety of fatty acid profiles that offer a wide scope for several oil-based bioproducts, including biodiesel and omega-3 fatty acids. A biorefinery approach for microalgae would make economical production more feasible but challenges remain for efficient harvesting and extraction processes for some species.     

微藻异养高密度培养研究进展与发展趋势*

微藻细胞可以积累大量油脂、蛋白质、多糖、色素、不饱和脂肪酸等物质,在能源、食品、饵料、保健品及药品等行业有巨大的应用价值。然而,微藻在传统光自养模式下很难实现高密度培养来大量生产这些重要的物质,进而限制了微藻的实际应用。相反,微藻在异养模式下生长速度快、生物质浓度高,可以短时间内获得大量微藻生物质。因此,异养高密度培养微藻具备大规模、高效率培养微藻生产目标产物的巨大潜力。阐述微藻异养培养的优缺点及相应技术难点的解决思路、影响微藻异养生长及目标产物积累的主要营养因子和环境因子、微藻异养高密度培养的方式及微藻异养高密度培养的当前发展水平。结合文献报道分析微藻异养高密度培养的四个具有极大发展潜力的发展方向,以期更好地利用异养模式来高效率、低成本培养微藻生产大量目标产物,满足上述多个行业对微藻原材料的巨大需求,从而加速微藻产业的发展。     

The extracellular polysaccharides of the red microalgae: Chemistry and rheology

Cells of red microalgae encapsulated within sulphated polysaccharides, are thought to have a wide range of potential industrial applications. Our group is thus carrying out a comprehensive research program aimed at bringing these biopolymers into industrial use. The program includes physiological studies on polysaccharide production, outdoor cultivation of the microalgae, and characterisation of the polysaccharides. Chemical composition and structure and physicochemical properties were investigated for the polysaccharides of three red microalgae, Porphyridium sp., P. aerugineum and Rhodella reticulata. Differences were found among the three species in the composition of the monosugars, half ester sulphate groups and glucuronic acid content, but a disaccharide isolated was identical in all the species examined. This disaccharide is thought to be the basic building block of these polysaccharides. In addition, monosugar sulphates were isolated and characterised. Fractionation by charge showed the polysaccharides to be heterogenous and composed of at least two fractions that differed in their composition. Although the polysaccharides differed in composition, their rheological characteristics were found to be similar. Aqueous solutions of the biopolymers were stable over a wide range of pH values and temperatures and were compatible with monovalent cations. Mixtures of the algal polysaccharides with locust bean gum exhibited synergism and syneresis. When the gel strength was compared with that of agar gel at the same concentration the polysaccharide gels were found to be weaker.     

Current Large-Scale US Biofuel Potential from Microalgae Cultivated in Photobioreactors

Current assessments of the commercial viability and productivity potential of microalgae biofuels have been forced to extrapolate small-scale research data. The resulting analyses are not representative of microalgae cultivation and processing at industrial scale. To more accurately assess the current near-term realizable, large-scale microalgae productivity potential in the USA, this paper presents a model of microalgae growth derived from industrial-scale outdoor photobioreactor growth data. This model is combined with thermal models of the photobioreactor system and 15?years of hourly historical weather data from 864 locations in the USA to more accurately assess the current productivity potential of microalgae. The resulting lipid productivity potential of Nannochloropsis is presented in the form of a map that incorporates various land availability models to illustrate the near-term feasible cultivation locations and corresponding productivity potentials for the USA. The discussion focuses on a comparison of model results with productivity potentials currently reported in literature, an assessment demonstrating the scale of Department of Energy 2030 alternative fuel goals, and a critical comparison of productivity potential in several key regions of the USA.     

Heterotrophic cultivation of microalgae for pigment production: A review

Pigments (mainly carotenoids) are important nutraceuticals known for their potent anti-oxidant activities and have been used extensively as high end health supplements. Microalgae are the most promising sources of natural carotenoids and are devoid of the toxic effects associated with synthetic derivatives. Compared to photoautotrophic cultivation, heterotrophic cultivation of microalgae in well-controlled bioreactors for pigments production has attracted much attention for commercial applications due to overcoming the difficulties associated with the supply of CO₂ and light, as well as avoiding the contamination problems and land requirements in open autotrophic culture systems. In this review, the heterotrophic metabolic potential of microalgae and their uses in pigment production are comprehensively described. Strategies to enhance pigment production under heterotrophic conditions are critically discussed and the challenges faced in heterotrophic pigment production with possible alternative solutions are presented.