Synthesis of TaqMan probes using bisphosphoramidite of cyanine dye Cy3

A method of the synthesis of TaqMan probes with the use of bisphosphoramidite of cyanine dye Cy3 was proposed. The synthesis results in two variants of the probes consisting of either one or two oligonucleotide residues (bearing a quencher at the 3' end) attached to the dye, with the first variant being predominant. The RT-PCR probe of the classical structure bearing one oligonucleotide residue was shown to be more efficient as compared to the probe containing two oligonucleotides.     

A DNA minor groove binder shows high effectiveness as a quencher for FRET probes

A non-fluorescent quencher based on thiazole orange was incorporated into oligonucleotides. Fluorimetry and fluorogenic real-time polymerase chain reaction experiments demonstrated that the quencher is effective for fluorescein amidite dyes. The thiazole orange quencher also increased the melting temperature of DNA duplexes, which may facilitate the design of shorter and more discriminatory probes. The effectiveness of the quencher in TaqMan probes was also demonstrated.     

Evaluation of new linkers and synthetic methods for internal modified oligonucleotides

Several fluorescence resonance energy transfer (FRET) oligonucleotide probes were made with different internal linkages between the DNA and the quencher dye. In one example, a 5'-fluorescein beta-actin-based 26-mer DNA sequence was synthesized bearing an internal Tamra quencher. Two different versions were prepared using either conventional C5 [N-(6-aminohexyl)-3-acrylamido]pyrimidine-modified uridine and solution-phase Tamra active ester coupling or solid-phase addition of a Tamra amidite to a C5 [N-(6-hydroxyhexyl)-3-acrylamido]pyrimidine-modified uridine. The products were compared in functional assays. They performed very similarly both in a fluorescence-based melting point assay as well as in quantitative PCR. Another set of beta-actin probes were synthesized utilizing N4 [N-2-(ethylene glycol ethyl)-5-methyl]cytidine and solid-phase Tamra amidite addition at positions flanking those of the uridine. These versions gave lower T(m)s than either uridine-labeled probe and did not work as well in quantitative PCR. A control experiment using oligonucleotides with the same modified residues but without fluorophores attached revealed the same trend as the T(m) study of internal Tamra-labeled probes. Experimental details for the synthesis, purification, and testing are presented.     

Efficiencies of fluorescence resonance energy transfer and contact-mediated quenching in oligonucleotide probes

An important consideration in the design of oligonucleotide probes for homogeneous hybridization assays is the efficiency of energy transfer between the fluorophore and quencher used to label the probes. We have determined the efficiency of energy transfer for a large number of combinations of commonly used fluorophores and quenchers. We have also measured the quenching effect of nucleotides on the fluorescence of each fluorophore. Quenching efficiencies were measured for both the resonance energy transfer and the static modes of quenching. We found that, in addition to their photochemical characteristics, the tendency of the fluorophore and the quencher to bind to each other has a strong influence on quenching efficiency. The availability of these measurements should facilitate the design of oligonucleotide probes that contain interactive fluorophores and quenchers, including competitive hybridization probes, adjacent probes, TaqMan probes and molecular beacons.     

Unexpected transformation of black hole quenchers in electrophoretic purification of the fluorescein-containing TaqMan probes

The fluorescence quenchers BHQ1 and BHQ2 can be modified by trace amounts of ammonium persulfate, used for initiating gel polymerization, in electrophoretic purification of TaqMan probes using a denaturing polyacrylamide gel. The case study of BHQ1 quencher has demonstrated that a Boyland–Sims reaction proceeds in the presence of ammonium persulfate to give the corresponding sulfate. The absorption maximum of the resulting quencher shifts to the short-wavelength region relative to the absorption maximum of the initial BHQ1. The TaqMan probe containing such a quencher is less efficient as compared with the probe carrying an unmodified BHQ1. The presence of fluorescein in TaqMan probe plays decisive role in this transformation: the quencher modification proceeds at a considerably lower rate when the fluorescein is absent or replaced with a rhodamine dye (for example, R6G). It is assumed that the observed reaction can take place in two ways—both in darkness and in the reaction of the quencher in an excited state due to energy transfer from the fluorophore irradiated by light.     

Purification of dye-labeled oligonucleotides by ion-pair reversed-phase high-performance liquid chromatography

Singly- and dually-labeled synthetic oligonucleotides were purified by ion-pair reversed-phase high-performance liquid chromatography using a 50x4.6-mm column packed with porous, 2.5 micrometer C(18) sorbent. We studied the mechanism of dye-labeled oligonucleotide retention in order to improve the quality of purification. By-products of oligonucleotide synthesis were characterized by liquid chromatography with mass spectrometry detection (LC-MS). We purified oligonucleotides labeled with 6-carboxyfluorescein (6FAM), hexachlorofluorescein (HEX), tetrachlorofluorescein (TET), carboxytetramethylrhodamine (TAMRA) and indodicarboxycyanine (Cy3) dyes, as well as dually-labeled TaqMan probes. Purification of a 0.1-micromole oligonucleotide synthesis in a single injection was demonstrated.     

Evaluation of dual-labeled fluorescent DNA probe purity versus performance in real-time PCR

Real-time PCR technology using dual-labeled fluorescent oligonucleotide probes allows for sensitive, specific, and quantitative determination of mRNA or DNA targets. Historically, dual-labeled probes have been the most expensive reagent in real-time PCR because of the postsynthesis high-performance liquid chromatography (HPLC) and/or gel purification steps required due to limitations in traditional synthesis chemistry. The recent availability of quencher reagents that allow the 3' quencher incorporation as part of the on-machine synthesis has presented the possibility that probes, when carefully synthesized, may be used without extensive postsynthesis purification. This would substantially reduce cost, making the synthesis of dual-labeled fluorescent probes affordable to any DNA synthesis laboratory. The Nucleic Acids Research Group (NARG) of the Association of Biomolecular Resource Facilities (ABRF) (Santa Fe, NM, USA) tested the hypothesis that now any DNA synthesis laboratory is capable of making quality dual-labeled fluorescent probes suitable for real-time PCRs without the need for postsynthesis purification. Members of the DNA synthesis community synthesized dual-labeled human beta-actin probes and submitted them for quality and functional analysis. We found that probes that were at least 20% pure had the same efficiency as those near 100% purity, but the sensitivity of the assay was reduced as the level of purity decreased.     

TaqMan probe array for quantitative detection of DNA targets

To date real-time quantitative PCR and gene expression microarrays are the methods of choice for quantification of nucleic acids. Herein, we described a unique fluorescence resonance energy transfer-based microarray platform for real-time quantification of nucleic acid targets that combines advantages of both and reduces their limitations. A set of 3′ amino-modified TaqMan probes were designed and immobilized on a glass slide composing a regular microarray pattern, and used as probes in the consecutive PCR carried out on the surface. During the extension step of the PCR, 5′ nuclease activity of DNA polymerase will cleave quencher dyes of the immobilized probe in the presence of nucleic acids targets. The increase of fluorescence intensities generated by the change in physical distance between reporter fluorophore and quencher moiety of the probes were collected by a confocal scanner. Using this new approach we successfully monitored five different pathogenic genomic DNAs and analyzed the dynamic characteristics of fluorescence intensity changes on the TaqMan probe array. The results indicate that the TaqMan probe array on a planar glass slide monitors DNA targets with excellent specificity as well as high sensitivity. This set-up offers the great advantage of real-time quantitative detection of DNA targets in a parallel array format.     

Synthesis and fluorescent properties of oligonucleotides, containing a new fluorescent marker--n-(2-benzoxazolyl)tolane]

A functional (dihydroxybutyl) derivative of p-(2-benzoxazolyl)tolane, a fluorescent label novel for biopolymers, was synthesized. The functionalized solid support obtained on its basis was employed in the synthesis of oligodeoxynucleotides 3-terminally labeled with benzoxazolyltolane (these oligonucleotides also contained 1-phenylethynylpyrene residues). This fluorophore within its dihydroxybutyl derivative and the oligonucleotides modified with it displays an intensive fluorescence characterized by a high Stokes shift. The oligonucleotides labeled with this fluorophore are potential probes sensitive to the biopolymer microenvironment.     

Biallelic discrimination assays for the three common Ashkenazi Jewish mutations and a common non-Jewish mutation, in Tay-Sachs disease, using fluorogenic TaqMan probes

We have developed rapid semiautomated fluorogenic TaqMan assays for the three common Jewish mutations that occur in Tay-Sachs disease, the TATC 4-bp insertion in exon 11 (1,278insTATC), the IVS 12 + 1G --> C, splice site mutation in intron 12 (1421 + 1 G --> C), and the G --> A change at the 3' end of exon 7 (G269S), as well as for a non-Jewish mutation, IVS9 + I G --> A, believed to be prevalent in patients of Celtic descent. The TaqMan assays are designed to run on the ABI SDS 7700 sequence detection system, using allele-specific probes that carry a reporter dye at the 5' end and a quencher dye at the 3' end. Using a 96-well format, all four assays can be performed simultaneously on the same plate, with real-time fluorescence detection or just an end-point plate read. DNA samples from 78 patients identified as carriers by biochemical screening and genotyped by conventional techniques were used to assess the accuracy and efficiency of the probes in allelic discrimination assays. There were no discrepancies noted between previously assigned genotypes and the results obtained by application of this methodology.     

Allelic discrimination using fluorogenic probes and the 5′ nuclease assay

Large-scale screening for known polymorphisms will require techniques with few steps and the ability to automate each of these steps. In this regard, the 5′ nuclease, or TaqMan, PCR assay is especially attractive. A fluorogenic probe, consisting of an oligonucleotide labeled with both a fluorescent reporter dye and a quencher dye, is included in a typical PCR. Amplification of the probe-specific product causes cleavage of the probe, generating an increase in reporter fluorescence. By using different reporter dyes, cleavage of allele-specific probes can be detected in a single PCR. The 5′ nuclease assay has been successfully used to discriminate alleles that differ by a single base substitution. Guidelines have been developed so that an assay for any single nucleotide polymorphism (SNP) can be quickly designed and implemented. All assays are performed using a single reaction buffer and single thermocycling protocol. Furthermore, a standard method of analysis has been developed that enables automated genotype determination. Applications of this assay have included typing a number of polymorphisms in human drug metabolism genes.     

Synthesis and Fluorescent Characteristics of Oligodeoxynucleotides Containing a Novel Fluorescent Label,p-(2-Benzoxazolyl)tolane

A functional (dihydroxybutyl) derivative of p-(2-benzoxazolyl)tolane, a fluorescent label novel for biopolymers, was synthesized. The functionalized solid support obtained on its basis was employed in the synthesis of oligodeoxynucleotides 3-terminally labeled with benzoxazolyltolane (these oligonucleotides also contained 1-phenylethynylpyrene residues). This fluorophore within its dihydroxybutyl derivative and the oligonucleotides modified with it display an intensive fluorescence characterized by a high Stokes shift. The oligonucleotides labeled with this fluorophore are potential probes sensitive to the bioplymer microenvironment.     

Defective interfering particles of poliovirus: mapping of the deletion and evidence that the deletions in the genomes of DI(1), (2) and (3) are located in the same region.

The deletions in RNAs of three defective interfering (DI) particles of poliovirus type 1 have been located and their approximate extent determined by three methods. (1) Digestion with RNase III of DI RNAs yields the same 3′-terminal fragments as digestion with RNase III of standard virus RNA. The longest 3′-terminal fragment has a molecular weight of 1.55 × 10⁶. This suggests that the deletions are located in the 5′-terminal half of the polio genome. (2) Fingerprints of RNase T₁-resistant oligonucleotides of all three DI RNAs are identical and lack four large oligonucleotides as compared to the fingerprints of standard virus, an observation suggesting that the deletions in all three DI RNAs are located in the same region of the viral genome. The deletion-specific oligonucleotides have also been shown to be within the 5′-terminal half of the viral genome by alkali fragmentation of the RNA and fingerprinting poly (A)-linked (3′-terminal) fragments of decreasing size. (3) Virion RNA of DI(2) particles was annealed with denatured double-stranded RNA (RF) of standard virus and the hybrid heteroduplex molecules examined in the electron microscope. A single loop, approximately 900 nucleotides long and 20% from one end of the molecules, was observed. Both the size and extent of individual deletions is somewhat variable in different heteroduplex molecules, an observation suggesting heterogeneity in the size of the deletion in RNA of the DI(2) population. Our data show that the DI RNAs of poliovirus contain an internal deletion in that region of the viral genome known to specify the capsid polypeptides. This result provides an explanation as to why poliovirus DI particles are unable to synthesize viral coat proteins.     

5′-Bispyrene molecular beacons for RNA detection

New fluorescent excimer-forming 5′-bispyrene molecular beacons for the detection of RNA were designed. The probes are 2′-O-methyl RNAs containing 5′-bispyrenylmethylphosphorodiamidate group (bispyrene group) at the 5′-end and a fluorescence quencher (BHQ1) at the 3′-end. A comparative study of the fluorescent properties of the probes having different distance between 5′-bispyrene group and target RNA upon the formation of hybridization complex was performed. The probes with bispyrene group located in the close proximity to the duplex exhibit the greatest excimer fluorescence upon binding to a complementary the 43-nt target RNA, in contrast to the probes with 5′-bispyrene group at dangling end. The feasibility of the new probes for visualization of intracellular RNA was demonstrated using 28S rRNA as a target. The results obtained confirm that the probes proposed in the study can be used as selective tools for RNA detection.     

Oligothiophene molecular beacons

Oligomers of thiophene are widely studied compounds for their electronic and optoelectronic properties. Despite their strong fluorescence, their use as markers for biomolecules, especially for oligonucleotides (ONs), is still largely unexplored. Here, we describe the synthesis of a series of ON molecular beacons employing different oligothiophenes as fluorescent probes and discuss their fluorescence emissions in comparative experiments with and without dabcyl as a quencher, in their hairpin and linear conformations, and as duplexes after hybridization with a complementary target.     

New photodynamic molecular beacons (PMB) as potential cancer-targeted agents in PDT

Further improvements in Photodynamic therapy (PDT) necessitate that the dye targets more selectively tumour tissues or neovascularization than healthy cells. Different enzymes such as matrix metalloproteinases (MMPs) are overexpressed in tumour areas. Among these MMPs, gelatinases (MMP-2 and MMP-9) and its activator MMP-14 are known to play a key role in tumour angiogenesis and the growth of many cancers such as glioblastoma multiforme (GBM), an aggressive malignant tumour of the brain. These last years, the concept of photodynamic molecular beacons (PMB) became interesting for controlling the photosensitizer’s ability to generate singlet oxygen (¹O₂) close to target biomolecules as MMPs. We report herein novel PMBs triggered by MMP-2 and/or MMP-9 and/or MMP-14, comprising a photosensitizer and a singlet oxygen quencher linked by MMP cleavable peptide linker (H-GRIGFLRTAKGG-OH). First of all, we focused on the synthesis and the photophysical study of different derivatives photosensitizer-peptide. This preliminary work concluded on an influence of the nature and the distance from the peptide, but not of the position of the photosensitizer in these derivatives on the proteolytic enzymatic action. The nature of the quencher used (a blackberry quencher (BBQ-650) or a black hole quencher (BHQ3)) does not influence the enzymatic action. We also studied the influence of an additional PEG spacer. Finally, the synthesis, the singlet oxygen quenching efficiency and the enzymatic activation of these new MMP- cleavable-PMBs were compared.     

Factors affecting the performance of 5' nuclease PCR assays for Listeria monocytogenes detection

The design and operating parameters affecting the performance of 5' nuclease PCR (TaqMan) assays for the detection of Listeria monocytogenes was investigated. A system previously developed and based on the hlyA gene was used as a model [Appl. Environ. Microbiol. 61 (1995) 3724]. A series of fluorogenic probes labeled with a reporter and a quencher dye was synthesized to explore the effect of probe position and sequence content on the efficiency of probe hydrolysis. In addition, a series of PCR primer pairs that altered the distance between the upstream primer and the interceding probe was examined. The effects of various assay parameters were evaluated by measuring the ratio of the fluorescence intensity of the reporter dye over the quencher dye (deltaRQ). For a given probe sequence, the deltaRQ was typically lower if the 5' terminus was a G residue. Decreasing the probe concentration increased the deltaRQ, although this was at the expense of reproducibility in the assay readout. The distance between the upstream primer and the interceding probe has a significant effect on probe hydrolysis. Reducing the primer-probe distance from, for example, 127 to 4 nt increased the deltaRQ from 2.87 to 5.00. These general rules were used to develop a 5' nuclease PCR (TaqMan) assay with enhanced signal output, providing higher and more reproducible deltaRQ values for L. monocytogenes detection.     

2′-BIS-PYRENE MODIFIED OLIGONUCLEOTIDES: SENSITIVE FLUORESCENT PROBES OF NUCLEIC ACIDS STRUCTURE

A new type of fluorescent nucleic acid probes, 2′-bis-pyrene-modified oligonucleotides, is described. Preparation of these conjugates involves attachment of two pyrene moieties to the 2′-phosphate group introduced into any position within a sequence by solid-phase phosphoramidite synthesis. Good hybridization properties of the 2′-bis-pyrene probes, their nuclease resistance and sensitivity of fluorescence to the type of complementary nucleic acid have been demonstrated.     

Edesign: Primer and Enhanced Internal Probe Design Tool for Quantitative PCR Experiments and Genotyping Assays

Analytical PCR experiments preferably use internal probes for monitoring the amplification reaction and specific detection of the amplicon. Such internal probes have to be designed in close context with the amplification primers, and may require additional considerations for the detection of genetic variations. Here we describe Edesign, a new online and stand-alone tool for designing sets of PCR primers together with an internal probe for conducting quantitative real-time PCR (qPCR) and genotypic experiments. Edesign can be used for selecting standard DNA oligonucleotides like for instance TaqMan probes, but has been further extended with new functions and enhanced design features for Eprobes. Eprobes, with their single thiazole orange-labelled nucleotide, allow for highly sensitive genotypic assays because of their higher DNA binding affinity as compared to standard DNA oligonucleotides. Using new thermodynamic parameters, Edesign considers unique features of Eprobes during primer and probe design for establishing qPCR experiments and genotyping by melting curve analysis. Additional functions in Edesign allow probe design for effective discrimination between wild-type sequences and genetic variations either using standard DNA oligonucleotides or Eprobes. Edesign can be freely accessed online at http://www.dnaform.com/edesign2/, and the source code is available for download.