On the freezing and identification of lipid monolayer 2-D arrays for cryoelectron microscopy

Lipid monolayers provide a convenient vehicle for the crystallization of biological macromolecules for 3-D electron microscopy. Although numerous examples of 3-D images from 2-D protein arrays have been described from negatively stained specimens, only six structures have been done from frozen-hydrated specimens. We describe here a method that makes high quality frozen-hydrated specimens of lipid monolayer arrays for cryoelectron microscopy. The method uses holey carbon films with patterned holes for monolayer recovery, blotting and plunge freezing to produce thin aqueous films which cover >90% of the available grid area. With this method, even specimens with relatively infrequent crystals can be screened using automated data collection techniques. Though developed for microscopic examination of 2-D arrays, the method may have wider application to the preparation of single particle specimens for 3-D image reconstruction.     

Functional assay of Salmonella typhi OmpC using reconstituted large unilamellar vesicles: a general method for characterization of outer membrane proteins

The immunodominant trimeric beta-barrel outer membrane protein OmpC from Salmonella typhi, the causative agent of typhoid, has been functionally characterized here. The activity in the vesicle environment was studied in vitro using OmpC reconstituted into proteoliposomes. Passage of polysaccharides and polyethyleneglycols through OmpC has been examined to determine the permeability properties. The relative rate of neutral solute flux yields a radius of 1.1 nm for the S. typhi OmpC pore. This is almost double the pore size of Escherichia coli. This provides an example of large pore size present in the porins that form trimers as in the general bacterial porin family. The method used in this study provides a good membrane model for functional studies of porins.     

A Versatile High-Vacuum Cryo-transfer System for Cryo-microscopy and Analytics

Cryogenic microscopy methods have gained increasing popularity, as they offer an unaltered view on the architecture of biological specimens. As a prerequisite, samples must be handled under cryogenic conditions below their recrystallization temperature, and contamination during sample transfer and handling must be prevented. We present a high-vacuum cryo-transfer system that streamlines the entire handling of frozen-hydrated samples from the vitrification process to low temperature imaging for scanning transmission electron microscopy and transmission electron microscopy. A template for cryo-electron microscopy and multimodal cryo-imaging approaches with numerous sample transfer steps is presented.     

Complementation analysis of the wild-type and mutant ompR genes exhibiting different phenotypes of osmoregulation of the ompF and ompC genes of Escherichia coli

Expression of the ompF and ompC genes, which encode the major outer membrane proteins, OmpF and OmpC, respectively, is affected in a reciprocal manner by the osmolarity of the growth medium. This osmoregulation is mediated by the OmpR protein, a positive regulator of both genes, which is encoded by the ompR gene. Structural and functional properties of this regulatory protein were studied through complementation analysis of the wild-type and five mutant ompR genes that exhibited differences in osmoregulation of the expression of the OmpF and OmpC proteins. Complementation was carried out with combinations of a host strain and a plasmid, each of which carried either the wild-type or a mutant ompR gene. In some combinations, negative complementation was observed. For example, ompR1, a deletion mutation with an OmpF- OmpC- phenotype, was dominant to OmpF+ or OmpC+ phenotypes conferred by other ompR genes. Positive complementation of two mutant ompR genes was also observed in other combinations, when the two mutations were distantly located from each other on the OmpR protein. These results, together with other observations, support the view that the OmpR protein has a two-domain structure, each domain exhibiting a different role in the expression of the OmpF and OmpC proteins, and that this protein takes a multimeric structure as a functional unit.     

Characterization of monoclonal antibodies to the outer membrane protein (OmpD) of Salmonella typhimurium.

A panel of monoclonal antibodies, seven against the trimeric and seven against the monomeric forms to outer membrane protein D (OmpD) of Salmonella typhimurium were produced. The specificities of these monoclonal antibodies for the porin proteins of S. typhimurium and their cross-reactions with Salmonella porins OmpC and OmpF were determined by Western immunoblotting and enzyme-linked immunosorbent assay. We observed that OmpD shared more epitopes and had greater structural similarity with OmpC than with OmpF.     

Electron microscopy and computer image averaging of ice-embedded large ribosomal subunits from Escherichia coli

Electron micrographs of frozen-hydrated, large ribosomal subunits from Escherichia coli have been analyzed by computer image processing. Images of subunits in the so-called "crown" orientation were analyzed by correlation alignment procedures developed for negatively stained specimens. Averages of the aligned images showed both similarities and differences to averages determined for negatively stained specimens. The L1 ridge is more dense and stalk-like in frozen-hydrated as compared with negatively stained subunits, possibly because it is associated with ribosomal RNA. The results show that it should be feasible to determine the three-dimensional structure of the large ribosomal subunit from micrographs of individual, frozen-hydrated subunits that have been tilted in the electron microscope.     

OmpC-like porin from Yersinia pseudotuberculosis: Molecular characteristics, physico-chemical and functional properties

Pore-forming protein from the outer membrane of Yersinia pseudotuberculosis cultured at 37°C has been isolated and characterized. Comparative analysis of the primary and three-dimensional structures of this protein and of OmpC porin from E. coli was carried out, functional properties of these proteins have been studied using bilayer lipid membranes (BLM) technique. The degree of homology, molecular mass and pore-forming properties of the isolated porin was found to be closer to those of OmpC porin from E. coli than OmpF porin from Y. pseudotuberculosis. The value of the most probable conductivity of OmpC porin from Y. pseudotuberculosis (0.18 pS) in BLM corresponded to the conductivity of the native trimer of this protein. Using CD spectroscopy, the porins investigated were shown to belong to the β-structured proteins. Data of the primary structure and intrinsic protein fluorescence revealed essential differences in localization and microenvironment of tryptophan residues in the porins investigated. Participation of external loops L2 and L6 in the formation of the antigenic structure of OmpC porin from Y. pseudotuberculosis was demonstrated. On the basis of crystal structure of osmoporin from Klebsiella pneumoniae, three-dimensional models of the monomer and trimer of the Y. pseudotuberculosis porin were obtained. Using Web server AGGRESCAN, the localization of protein structure sites with the increased aggregation capability (hot spots) has been deter-mined. It turned out that some of these zones localize in the region of intramonomeric contacts in the porin trimer; however, a large part of them is located on the external surface of the β-barrel. The process of thermal denaturation has been studied and the melting points of the porins were determined. It was found that significant changes in the microenvironment of the indole fluorophores (especially tryptophan residues of spectral class I) took place in the process of the thermodenaturation of the proteins. These changes preceded the irreversible conformational transition observed for the E. coli porin at 77°C and for the Y. pseudotuberculosis porin at 70°C.     

Low temperature FESEM of the calcifying interface of a scleractinian coral

The ultrastructural nature of the calcifying interface in the scleractinian coral Galaxea fascicularis has been investigated using high-resolution, low temperature field emission scanning electron microscopy (FESEM). This technique permitted structural analyses of soft tissue and skeleton in G. fascicularis in a frozen-hydrated state, without the need for chemical fixation or decalcification. Structural comparisons are made between frozen-hydrated polyps and polyps that have undergone conventional fixation and decalcification. Vesicles expelled by the calicoblastic ectodermal cells into sub-skeletal spaces and previously suggested to play a role in calcification were commonly observed in fixed samples but were distinctly absent in frozen-hydrated preparations. We propose that these vesicles are fixation artefacts. Two distinct types of vesicles (380 and 70 nm in diameter, respectively), were predominant throughout the calicoblastic ectodermal cells of frozen-hydrated preparations, but these were never seen to be entering, or to be contained within, sub-skeletal spaces, nor did they contain any crystalline material. In frozen-hydrated preparations, membranous sheets were seen to surround and isolate portions of aboral mesogloea and to form junctional complexes with calicoblastic cells. The calicoblastic ectoderm was closely associated with the underlying skeleton, with sub-skeletal spaces significantly smaller (P<0.0001) in frozen-hydrated polyps compared to fixed polyps. A network of organic filaments (26 nm in diameter) extended from the apical membranes of calicoblastic cells into these small sub-skeletal cavities. A thin sheath was also frequently observed adjacent to the apical membrane of calicoblastic cells.     

Manganese and cobalt recovery by surface display of metal binding peptide on various loops of OmpC in <Emphasis Type="Italic">Escherichia coli</Emphasis>

In a cell-surface display (CSD) system, successful display of a protein or peptide is highly dependent on the anchoring motif and the position of the display in that anchoring motif. In this study, a recombinant bacterial CSD system for manganese (Mn) and cobalt (Co) recovery was developed by employing OmpC as an anchoring motif on three different external loops. A portion of Cap43 protein (TRSRSHTSEG)₃ was employed as a manganese and cobalt binding peptide (MCBP), which was fused with OmpC at three different external loops. The fusions were made at the loop 2 [fusion protein-2 (FP2)], loop 6 (FP6), and loop 8 (FP8) of OmpC, respectively. The efficacy of the three recombinant strains in the recovery of Mn and Co was evaluated by varying the concentration of the respective metal. Molecular modeling studies showed that the short trimeric repeats of peptide probably form a secondary structure with OmpC, thereby giving rise to a difference in metal recovery among the three recombinant strains. Among the three recombinant strains, FP6 showed increased metal recovery with both Mn and Co, at 1235.14 (1 mM) and 379.68 (0.2 mM) µmol/g dry cell weight (DCW), respectively.     

Discovery of biphasic thermal unfolding of ompc with implications for surface loop stability

Escherichia coli outer membrane protein C (osmoporin) is a close homologue of OmpF or matrix porin, expressed under conditions of high osmolarity or ionic strength. Despite the fact that the proteins display very similar structures (rmsd = 0.78 ?), the channel activities (gating or selectivity) of the two proteins are markedly different, and compared to OmpF, there is much less published information about the stability and folding of OmpC. In this paper, we report a structural study of nine OmpC mutations that affect channel size and voltage gating. The secondary and tertiary structural analysis by circular dichroism (CD) indicated that the single-amino acid substitutions have little impact on the protein fold. However, a thermal denaturation study using CD and differential scanning calorimetry shows that different mutations lead to varied levels of destabilization, with the largest showing a 15 °C lower T(m) than the wild type and a 40% reduction in ΔH(cal). CD thermal denaturation measurements revealed that OmpC unfolds in a biphasic process, in which only the second phase is affected by the known mutations. The first stage of unfolding was shown to be reversible and separate from the main unfolding and loss of trimeric structure occurring in the second phase, leaving the flexible extracellular loops as the likely site of unfolding. The first phase is abolished as OmpC becomes more stable at lower pH.     

Focused-ion-beam thinning of frozen-hydrated biological specimens for cryo-electron microscopy

Cryo-electron microscopy can provide high-resolution structural information about cells and organelles in the nearly native, frozen-hydrated state. Applicability, however, is limited by difficulties encountered in preparing suitably thin, vitreously frozen biological specimens. We demonstrate, by cryo-electron tomography of Escherichia coli cells, that a focused ion beam (FIB) can be used to thin whole frozen-hydrated cells in a convenient and essentially artifact-free way.     

Roles of lipopolysaccharide and outer membrane protein OmpC of Escherichia coli K-12 in the receptor function for bacteriophage T4

The roles of lipopolysaccharide and OmpC, a major outer membrane protein, in the receptor function for bacteriophage T4 were studied by using Escherichia coli K-12 strains having mutations in the ompC gene or in genes controlling different stages of lipopolysaccharide synthesis. The receptor activity for T4 was monitored by (i) T4 sensitivity of intact cells, (ii) phage inactivation activity of cell envelopes, and (iii) phage inactivation activity of specimens reconstituted from purified OmpC and lipopolysaccharide. It was found that (i) in the presence of the OmpC protein, the essential region of the lipopolysaccharide for the receptor activity was the core-lipid A region that includes the heptose region, whereas the glucose region was not necessarily required for the receptor function; (ii) the OmpC protein was not required at all when the distal end of the lipopolysaccharide was removed to expose a glucose residue at the distal end; and (iii) when cells lacked both the OmpC protein and the glucose region, they became extremely resistant to T4. Based on these findings, the roles of the OmpC protein and lipopolysaccharide in T4 infection are discussed.     

Towards high-resolution three-dimensional imaging of native mammalian tissue: electron tomography of frozen-hydrated rat liver sections

Cryo-electron tomography of frozen-hydrated specimens holds considerable promise for high-resolution three-dimensional imaging of organelles and macromolecular complexes in their native cellular environment. While the technique has been successfully used with small, plunge-frozen cells and organelles, application to bulk mammalian tissue has proven to be difficult. We report progress with cryo-electron tomography of frozen-hydrated sections of rat liver prepared by high-pressure freezing and cryo-ultramicrotomy. Improvements include identification of suitable grids for mounting sections for tomography, reduction of surface artifacts on the sections, improved image quality by the use of energy filtering, and more rapid tissue excision using a biopsy needle. Tomographic reconstructions of frozen-hydrated liver sections reveal the native structure of such cellular components as mitochondria, endoplasmic reticulum, and ribosomes, without the selective attenuation or enhancement of ultrastructural details associated with the osmication and post-staining used with freeze-substitution.     

Conformational analysis of the Campylobacter jejuni porin.

The major outer membrane protein (MOMP) of Campylobacter jejuni was purified to homogeneity by selective solubilization and fast protein liquid chromatography. The amino acid composition of the MOMP indicates the presence of cysteine residues. The amino-terminal sequence, determined over 31 residues, shows no significant homology with any other porin from gram-negative bacteria except in a discrete region. Immunocross-reactivity between Escherichia coli OmpC and the MOMP was analyzed, and a common antigenic site between these two porins was identified with an anti-peptide antibody. From circular dichroism and immunological investigations, the existence of a stable folded monomer, containing a high level of beta-sheet secondary structure, is evident. Conformational analyses show the presence of a native trimeric state generated by association of the three folded monomers; the stability of this trimer is reduced compared with that of E. coli porins. This study clearly reveals that the C. jejuni MOMP is related to the family of trimeric bacterial porins.     

Three-dimensional structure of unstained, frozen-hydrated extended tails of bacteriophage T4

Unsupported, unstained frozen-hydrated extended tails of bacteriophage T4 have been studied by cryo-electron microscopy. Their three-dimensional structure has been reconstructed after correlation and averaging of the information from different particles. While the reconstructions of hydrated tails show all the features found by conventional electron microscopy, they are characterized by an open structure. Individual subunits constituting the axial repeat cannot be outlined unambiguously, as the density connectivity is sensitive to the phase-contrast transfer function effects. In order to minimize these effects, we found that the best data set for three-dimensional reconstruction is composed of layer-lines corrected for the phase-contrast transfer function and an uncorrected equator.     

Associations between light-harvesting complexes and Photosystem II from Marchantia polymorpha L. determined by two- and three-dimensional electron microscopy

Assemblies of Photosystem II and light-harvesting proteins were purified from the liverwort Marchantia polymorpha and investigated by two- and three-dimensional transmission electron microscopy of negatively stained specimens. By single-particle analysis, it was determined that about 25% of the particles are rectangular or slightly S-shaped with dimensions of 285 A in length, 144 A in width, 84 A in height, while the membrane part is about 52 A thick. This structure reveals the same architecture as that of a Photosystem II-light-harvesting assembly from seed plants. An overlay of the projection structure of the liverwort's complex with a projection structure deduced from stained trimeric LHC II crystals from pea confirmed the locations of trimeric LHC II within the liverwort's complex. Remarkably tight associations of LHC II and other chlorophyll a/b binding proteins with the PS II core complex are observed. More than 50% of the Photosystem II particles from the liverwort carry one or two additional masses. These extra masses are found to consist of an additional LHC II trimer and probably a chlorophyll a/b binding protein. For the first time, a three-dimensional structure of such a large assembly is defined.     

Scanning X-Ray Nanodiffraction on Dictyostelium discoideum

We have performed scanning x-ray nanobeam diffraction experiments on single cells of the amoeba Dictyostelium discoideum. Cells have been investigated in 1), freeze-dried, 2), frozen-hydrated (vitrified), and 3), initially alive states. The spatially resolved small-angle x-ray scattering signal shows characteristic streaklike patterns in reciprocal space, which we attribute to fiber bundles of the actomyosin network. From the intensity distributions, an anisotropy parameter can be derived that indicates pronounced local variations within the cell. In addition to nanobeam small-angle x-ray scattering, we have evaluated the x-ray differential phase contrast in view of the projected electron density. Different experimental aspects of the x-ray experiment, sample preparation, and data analysis are discussed. Finally, the x-ray results are correlated with optical microscopy (differential phase contrast and confocal microscopy of mutant strains with fluorescently labeled actin and myosin II), which have been carried out in live and fixed states, including optical microscopy under cryogenic conditions.     

Structure of PhoE porin in projection at 3.5 A resolution.

The structure of PhoE porin in projection normal to the membrane plane has been determined to a resolution of about 3.5 A by electron crystallographic techniques. The purified protein was reconstituted with lipid to form two-dimensional crystals. High resolution images and electron diffraction patterns of these specimens embedded in trehalose were recorded to obtain respectively the structure factor phase information and the more accurate values of the amplitude. The projection map shows interesting features that are not seen in the earlier map at 6.5 A. Details of the trimeric ring-like structures in our earlier map are now resolved. Each ring-like structure consists of "beads" with interbead spacings of about 4-6 A. These beads are interpreted as the projections of beta-strands along the strands' axes. At the center of the trimeric structure, there is a low density region that we proposed previously to be the location of lipopolysaccharide. Within each ring-like structure, there are complicated features which may play an important role in the size, selectivity, and stability of the channel.     

Scale-down effect on the extracellular proteome of Escherichia coli: correlation with membrane permeability and modulation according to substrate heterogeneities

Protein leakage is induced in well-mixed fed-batch bioreactor by comparison with cultures carried out in scale-down conditions. This effect is attributed to a progressive increase of cell membrane permeability and the synthesis of several outer-membrane components allowing to cope with substrate limitation commonly found in high cell density culture. A comparative analysis of protein leakage has thus been performed in well-mixed bioreactors and in scale-down devices. The extracellular proteome of E.coli has been investigated by 2D-gel electrophoresis and identified by subsequent MALDI-TOF analysis. On 110 picked spots, 67 proteins have been identified and the sub-localisation and the molecular function of these proteins have been determined. A majority of the extracellular proteome was composed of outer-membrane and periplasmic proteins (64 %) confirming the fact that leakage is involved in high cell density cultures. About 50 % of this extracellular proteome was composed of transport and binding proteins. Furthermore, the more abundant spots on the gel corresponded to porin proteins and periplasmic transporters. In particular, the OmpC porin was found to be very abundant. Moreover, the scale-down effect on this extracellular proteome has been investigated by two-dimensional differential in-gel electrophoresis analysis (2D-DIGE), and significant differences have been observed by comparison with culture carried out in well-mixed systems. Indeed, since substrate limitation signal is alleviated in this kind of apparatus, cell permeability was lowered as shown by flow cytometry. In scale-down conditions, protein leakage was thus less abundant.     

Structure of CaATPase: electron microscopy of frozen-hydrated crystals at 6 A resolution in projection

Thin, three-dimensional crystals of CaATPase have been studied at high resolution by electron crystallography. These crystals were grown by adding purified CaATPase to appropriate concentrations of lipid, detergent and calcium. A thin film of crystals was then rapidly frozen and maintained in the frozen-hydrated state during electron microscopy. The resulting electron diffraction patterns extend to 4.1 A resolution and images contain phase data to 6 A resolution. By combining Fourier amplitudes from electron diffraction patterns with phases from images, a density map has been calculated in projection. Comparison of this map from unstained crystals with a previously determined map from negatively stained crystals reveals distinct contributions from intramembranous and extramembranous protein domains. On the basis of this distinction and of the packing of molecules in the crystal, we have proposed a specific arrangement for the ten alpha-helices that have been suggested as spanning the bilayer.