Single-channel water permeabilities of Escherichia coli aquaporins AqpZ and GlpF

From equilibrium molecular dynamics simulations we have determined single-channel water permeabilities for Escherichia coli aquaporin Z (AqpZ) and aquaglyceroporin GlpF with the channels embedded in lipid bilayers. GlpF's osmotic water permeability constant pf exceeds by 2-3 times that of AqpZ and the diffusive permeability constant (pd) of GlpF is found to exceed that of AqpZ 2-9-fold. Achieving complete water selectivity in AqpZ consequently implies lower transport rates overall relative to the less selective, wider channel of GlpF. For AqpZ, the ratio pf/pd congruent with 12 is close to the average number of water molecules in the channel lumen, whereas for GlpF, pf/pd congruent with 4. This implies that single-file structure of the luminal water is more pronounced for AqpZ, the narrower channel of the two. Electrostatics profiles across the pore lumens reveal that AqpZ significantly reinforces water-channel interactions, and weaker water-water interactions in turn suppress water-water correlations relative to GlpF. Consequently, suppressed water-water correlations across the narrow selectivity filter become a key structural determinant for water permeation causing luminal water to permeate slower across AqpZ.     

ADP-binding site of Escherichia coli succinyl-CoA synthetase revealed by x-ray crystallography

Succinyl-CoA synthetase (SCS) catalyzes the following reversible reaction via a phosphorylated histidine intermediate (His 246alpha): succinyl-CoA + P(i) + NDP <--> succinate + CoA + NTP (N denotes adenosine or guanosine). To determine the structure of the enzyme with nucleotide bound, crystals of phosphorylated Escherichia coli SCS were soaked in successive experiments adopting progressive strategies. In the first experiment, 1 mM ADP (>15 x K(d)) was added; Mg(2+) ions were omitted to preclude the formation of an insoluble precipitate with the phosphate and ammonium ions. X-ray crystallography revealed that the enzyme was dephosphorylated, but the nucleotide did not remain bound to the enzyme (R(working) = 17.2%, R(free) = 22.8% for data to 2.9 A resolution). Catalysis requires Mg(2+) ions; hence, the "true" nucleotide substrate is probably an ADP-Mg(2+) complex. In the successful experiment, the phosphate buffer was exchanged with MOPS, the concentration of sulfate ions was lowered, and the concentrations of ADP and Mg(2+) ions were increased to 10.5 and 50 mM, respectively. X-ray diffraction data revealed an ADP-Mg(2+) complex bound in the ATP-grasp fold of the N-terminal domain of each beta-subunit (R(working) = 19.1%, R(free) = 24.7% for data to 3.3 A resolution). We describe the specific interactions of the nucleotide-Mg(2+) complex with SCS, compare these results with those for other proteins containing the ATP-grasp fold, and present a hypothetical model of the histidine-containing loop in the "down" position where it can interact with the nucleotide approximately 35 A from where His 246alpha is seen in both phosphorylated and dephosphorylated SCS.     

Two different conformational states of the KirBac3.1 potassium channel revealed by electron crystallography

Potassium channels allow the selective flow of K(+) ions across membranes. In response to external gating signals, the potassium channel can move reversibly through a series of structural conformations from a closed to an open state. 2D crystals of the inwardly rectifying K(+) channel KirBac3.1 from Magnetospirillum magnetotacticum have been captured in two distinct conformations, providing "snap shots" of the gating process. Analysis by electron cryomicroscopy of these KirBac3.1 crystals has resulted in reconstructed images in projection at 9 A resolution. Kir channels are tetramers of four subunits arranged as dimers of dimers. Each subunit has two transmembrane helices (inner and outer). In one crystal form, the pore is blocked; in the other crystal form, the pore appears open. Modeling based on the KirBac1.1 (closed) crystal structure shows that opening of the ion conduction pathway could be achieved by bending of the inner helices and significant movements of the outer helices.     

Structure of the bacteriorhodopsin mutant F219L N intermediate revealed by electron crystallography

Bacteriorhodopsin is a light-driven proton pump in halobacteria that forms crystalline patches in the cell membrane. Isomerization of the bound retinal initiates a photocycle resulting in the extrusion of a proton. An electron crystallographic analysis of the N intermediate from the mutant F219L gives a three-dimensional view of the large conformational change that occurs on the cytoplasmic side after deprotonation of the retinal Schiff base. Helix F, together with helix E, tilts away from the center of the molecule, causing a shift of approximately 3 A at the EF loop. The top of helix G moves slightly toward the ground state location of helix F. These movements open a water-accessible channel in the protein, enabling the transfer of a proton from an aspartate residue to the Schiff base. The movement of helix F toward neighbors in the crystal lattice is so large that it would not allow all molecules to change conformation simultaneously, limiting the occupancy of this state in the membrane to 33%. This explains photocooperative phenomena in the purple membrane.     

Structure of a signaling-competent reelin fragment revealed by X-ray crystallography and electron tomography

The large extracellular glycoprotein reelin directs neuronal migration during brain development and plays a fundamental role in layer formation. It is composed of eight tandem repeats of an approximately 380-residue unit, termed the reelin repeat, which has a central epidermal growth factor (EGF) module flanked by two homologous subrepeats with no obvious sequence similarity to proteins of known structure. The 2.05 A crystal structure of the mouse reelin repeat 3 reveals that the subrepeat assumes a beta-jelly-roll fold with unexpected structural similarity to carbohydrate-binding domains. Despite the interruption by the EGF module, the two subdomains make direct contact, resulting in a compact overall structure. Electron micrographs of a four-domain fragment encompassing repeats 3-6, which is capable of inducing Disabled-1 phosphorylation in neurons, show a rod-like shape. Furthermore, a three-dimensional molecular envelope of the fragment obtained by single-particle tomography can be fitted with four concatenated repeat 3 atomic structures, providing the first glimpse of the structural unit for this important signaling molecule.     

Water channel structures analysed by electron crystallography

Background

The mechanisms underlying water transport through aquaporin (AQP) have been debated for two decades. The water permeation phenomenon of AQP seems inexplicable because the Grotthuss mechanism does not allow for simultaneous fast water permeability and inhibition of proton transfer through the hydrogen bonds of water molecules.

Scope of review

The AQP1 structure determined by electron crystallography provided the first insights into the proton exclusion mechanism despite fast water permeation. Although several studies have provided clues about the mechanism based on the AQP structure, each proposed mechanism remains incomplete. The present review is focused on AQP function and structure solved by electron crystallography in an attempt to fill the gaps between the findings in the absence and presence of lipids.

Major conclusions

Many AQP structures can be superimposed regardless of the determination method. The AQP fold is preserved even under conditions lacking lipids, but the water arrangement in the channel pore differs. The differences might be explained by dipole moments formed by the two short helices in the lipid bilayer. In addition, structure analyses of double-layered two-dimensional crystals of AQP suggest an array formation and cell adhesive function.

General significance

Electron crystallography findings not only have contributed to resolve some of the water permeation mechanisms, but have also elucidated the multiple functions of AQPs in the membrane. The roles of AQPs in the brain remain obscure, but their multiple activities might be important in the regulation of brain and other biological functions. This article is part of a Special Issue entitled Aquaporins.     

The Escherichia coli aquaporin-Z water channel

The membrane pathway of the rapid fluxes of water by which microorganisms adapt promptly to abrupt changes in environmental osmolality have begun to be understood since the discovery of the Escherichia coli aquaporin-Z water channel, AqpZ. As in animals and plants, aquaporins are variously represented among microorganisms, in which 31 homologous genes have already been identified in eubacteria, Archaea, fungi and protozoa. The AqpZ channel is selectively permeable to water, although other functions are not excluded. Consistent with a conservation over the course of evolution, AqpZ and AQP1, a human counterpart, share similar structures. The aqpZ gene is growth phase and osmotically regulated. AqpZ has a role in both the short- and the long-term osmoregulatory response and is required by rapidly growing cells. AqpZ-like proteins seem to be necessary for the virulence expressed by some pathogenic bacteria. Microbial aquaporins are also likely to be involved in spore formation and/or germination. Additional roles may still be unknown. The use of AqpZ as a model system will continue to provide insight into the understanding of the importance of aquaporins.     

Adenovirus polypeptide IX revealed as capsid cement by difference images from electron microscopy and crystallography.

Particles of adenovirus type 2 (ad2), when disassembled, consistently yield groups-of-nine (GON) hexons, which are the major virion shell component. The location of a minor component (6%) of the GON has been determined using a novel combination of electron microscopy and X-ray crystallography. The Brookhaven Scanning Transmission Electron Microscope (STEM) was used to estimate the distribution of protein in the GON to a resolution of 15-18 A. The relative hexon positions then were determined to within 1 A using a model of the hexon derived from the X-ray crystal structure to search the STEM image. The difference image between the STEM image and a model hexon group reveals individual monomers of polypeptide IX extending along the hexon--hexon interfaces. The distribution confirms our earlier proposal that four trimers of polypeptide IX are embedded in the large cavities in the upper surface of the GON to cement hexons into a highly-stable assembly.     

Structure of LiCl core particles of 50 S ribosomal subunits from Escherichia coli by electron microscopy.

The structure of 50 S E. coli ribosomal subunits was studied by electron microscopy as these particles were gradually depleted of proteins by incubation with 0.5 to 6.0 m LiCl. Changes observed in the structure of the depleted subunits were correlated with the location of the deleted ribosomal proteins on the control 50 S particle. These changes were particularly striking in the "crown" region, the site of a considerable number of the proteins necessary for the biological activity of the 50 S subunit. Protein L 16, the first to be removed by the LiCl treatment, was found to be essential for the structural integrity of the large subunit through interactions with ribosomal proteins residing in the left-hand side crest and the interface. Based on electron microscopic evidence, a scheme was proposed for the structural changes accompanying the stepwise unfolding of the 50 S E. coli subunit by LiCl.     

Domain structure of the Acetogenium kivui surface layer revealed by electron crystallography and sequence analysis.

The three-dimensional structure of the Acetogenium kivui surface layer (S-layer) has been determined to a resolution of 1.7 nm by electron crystallographic techniques. Two independent reconstructions were made from layers negatively stained with uranyl acetate and Na-phosphotungstate. The S-layer has p6 symmetry with a center-to-center spacing of approximately 19 nm. Within the layer, six monomers combine to form a ring-shaped core surrounded by a fenestrated rim and six spokes that point towards the axis of threefold symmetry and provide lateral connectivity to other hexamers in the layer. The structure of the A. kivui S-layer protein is very similar to that of the Bacillus brevis middle wall protein, with which it shares an N-terminal domain of homology. This domain is found in several other extracellular proteins, including the S-layer proteins from Bacillus sphaericus and Thermus thermophilus, Omp alpha from Thermotoga maritima, an alkaline cellulase from Bacillus strain KSM-635, and xylanases from Clostridium thermocellum and Thermoanaerobacter saccharolyticum, and may serve to anchor these proteins to the peptidoglycan. To our knowledge, this is the first example of a domain conserved in several S-layer proteins.     

High resolution AFM topographs of the Escherichia coli water channel aquaporin Z.

Aquaporins form a large family of membrane channels involved in osmoregulation. Electron crystallography has shown monomers to consist of six membrane spanning alpha-helices confirming sequence based predictions. Surface exposed loops are the least conserved regions, allowing differentiation of aquaporins. Atomic force microscopy was used to image the surface of aquaporin Z, the water channel of Escherichia coli. Recombinant protein with an N-terminal fragment including 10 histidines was isolated as a tetramer by Ni-affinity chromatography, and reconstituted into two-dimensional crystals with p42(1)2 symmetry. Small crystalline areas with p4 symmetry were found as well. Imaging both crystal types before and after cleavage of the N-termini allowed the cytoplasmic surface to be identified; a drastic change of the cytoplasmic surface accompanied proteolytic cleavage, while the extracellular surface morphology did not change. Flexibility mapping and volume calculations identified the longest loop at the extracellular surface. This loop exhibited a reversible force-induced conformational change.     

The structure of Escherichia coli signal recognition particle revealed by scanning transmission electron microscopy

Structural studies on various domains of the ribonucleoprotein signal recognition particle (SRP) have not converged on a single complete structure of bacterial SRP consistent with the biochemistry of the particle. We obtained a three-dimensional structure for Escherichia coli SRP by cryoscanning transmission electron microscopy and mapped the internal RNA by electron spectroscopic imaging. Crystallographic data were fit into the SRP reconstruction, and although the resulting model differed from previous models, they could be rationalized by movement through an interdomain linker of Ffh, the protein component of SRP. Fluorescence resonance energy transfer experiments determined interdomain distances that were consistent with our model of SRP. Docking our model onto the bacterial ribosome suggests a mechanism for signal recognition involving interdomain movement of Ffh into and out of the nascent chain exit site and suggests how SRP could interact and/or compete with the ribosome-bound chaperone, trigger factor, for a nascent chain during translation.     

Structure of common pili from Escherichia coli.

Several important properties of the common pili from Escherichia coli are discussed. These pili were resistant to the gentle Folin-Ciocalteau reagent methods for protein detection and were not readily solubilized by sodium dodecyl sulfate. They were found to contain a reducing sugar but not peptidoglycan. The pilin had multiple conformations in sodium dodecyl sulfate solution, and the appearance of multiple bands on sodium dodecyl sulfate gels did not necessarily indicate heterogeneity of the preparation. The ilus subunit was found to be a different protein than outer membrane III, which has the same apparent molecular weight. In addition, we conformed the results of Brinton (Trans. N.Y. Acad. Sci 27:1003-1054, 1965): that there is a dramatic change in the properties of pili after they are heated at pH values below 2.