Blue emitting ZnO nanostructures grown through cellulose bio‐templates

This paper presents a green and cost‐effective recipe for the synthesis of blue‐emitting ZnO nanoparticles (NPs) using cellulose bio‐templates. Azadirachta indica (neem) leaf extract prepared in different solvents were used as biological templates to produce nanostructures of wurtzite ZnO with a particle size ~12–36 nm. A cellulose‐driven capping mechanism is used to describe the morphology of ZnO NPs. The scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), Fourier transform infra‐red (FTIR) and photoluminescence (PL) studies showed that solvents affect the growth process and the capping mechanism of bio‐template severely. Structural changes in ZnO NPs were evident with variation in pH, dielectric constants (DC) and boiling points (BP) of solvents. Furthermore, an energy band model is proposed to explain the origin of the blue emission in the as‐obtained ZnO NPs. PL excitation studies and the theoretical enthalpy values of individual defects were used to establish the association between the interstitial‐zinc‐related defect levels and the blue emission. Copyright © 2015 John Wiley & Sons, Ltd.     

Nanorods and nanofilms of ZnO generated at the liquid-liquid interface

Reaction between zinc cupferron and alkali at the organic-aqueous interface has been investigated in detail. In the presence of an organic amine, this reaction yields ZnO nanorods, the morphology depending on the concentration of reactants. In the absence of the amine, ultrathin films of ZnO are produced. Amazingly, both the nanorods and thin films are single crystalline in nature, even though the synthesis is carried out at room-temperature. Single-crystalline, substrate-free ultrathin films of ZnO, is indeed an extraordinary feature of synthesis at the liquid-liquid interface. Photoluminescence spectra show defect-related bands besides that due to band edge emission. The nanostructures exhibit ferromagnetism due to surface defects.     

Nanorods and nanofilms of ZnO generated at the liquid-liquid interface

Reaction between zinc cupferron and alkali at the organic-aqueous interface has been investigated in detail. In the presence of an organic amine, this reaction yields ZnO nanorods, the morphology depending on the concentration of reactants. In the absence of the amine, ultrathin films of ZnO are produced. Amazingly, both the nanorods and thin films are single crystalline in nature, even though the synthesis is carried out at room-temperature. Single-crystalline, substrate-free ultrathin films of ZnO, is indeed an extraordinary feature of synthesis at the liquid-liquid interface. Photoluminescence spectra show defect-related bands besides that due to band edge emission. The nanostructures exhibit ferromagnetism due to surface defects.     

Removal of Micrometer Size Morphological Defects and Enhancement of Ultraviolet Emission by Thermal Treatment of Ga-Doped ZnO Nanostructures

Mixed morphologies of Ga-doped Zinc Oxide (ZnO) nanostructures are synthesized by vapor transport method. Systematic scanning electron microscope (SEM) studies of different morphologies, after periodic heat treatments, gives direct evidence of sublimation. SEM micrographs give direct evidence that morphological defects of nanostructures can be removed by annealing. Ultra Violet (UV) and visible emission depends strongly on the annealing temperatures and luminescent efficiency of UV emission is enhanced significantly with each subsequent heat treatment. X-Ray diffraction (XRD) results suggest that crystal quality improved by annealing and phase separation may occur at high temperatures.     

Enhanced photoluminescence properties of electrospun Dy3+‐doped ZnO nanofibres for white lighting devices

Dy³⁺‐doped ZnO nanofibres with diameters from 200 to 500 nm were made using an electrospinning technique. The as‐fabricated amorphous nanofibres resulted in good crystalline continuous nanofibres through calcination. Dy³⁺‐doped ZnO nanofibres were characterized using scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), X‐ray diffraction (XRD), ultraviolet–visible (UV–vis) light spectroscopy, Fourier transform infrared spectroscopy (FTIR), and photoluminescence (PL). XRD showed the well defined peaks of ZnO. UV–vis spectra showed a good absorption band at 360 nm. FTIR spectra showed a Zn–O stretching vibration confirming the presence of ZnO. Photoluminescence spectra of Dy³⁺‐doped ZnO nanofibres showed an emission peak in the visible region that was free from any ZnO defect emission. Emissions at 480 nm and 575 nm in the Dy³⁺‐doped ZnO nanofibres were the characteristic peaks of dopant Dy³⁺ and implied efficient energy transfer from host to dopant. Luminescence intensity was found to be increased with increasing doping concentration and reduction in nanofibre diameter. Colour coordinates were calculated from photometric characterizations, which resembled the properties for warm white lighting devices.     

Morphological and Structural Studies of ZnO Nanotube Films Using Thermal Evaporation Technique

Simple thermal evaporation technique has been used to prepare Pb-doped ZnO nanotube films on Si (100) substrate. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) characterization have been employed to investigate the element’s contents, which indicates the presence of stoichiometry ZnO nanotube film. The XRD pattern has shown the wurtzite phase of ZnO and polycrystalline structure. Thickness and morphology of the films were explored from the cross sectional of the films and the surface using scanning electron microscopy (SEM) images. SEM images have confirmed the ZnO nanotubes and modifications of the morphology when adding Pb; the recorded images have proved that the diameter of the nanotubes is about 50 nm. However, AFM and SEM images have shown dense structure (without nanotubes) for non-doped ZnO film (Pb = 0 wt.%).

     

Investigating the Effect of Ag and Au Nanostructures with Spherical and Rod Shapes on the Emission Wavelength of OLED

Noble metals, especially Ag and Au nanostructures, have unique and adjustable optical attributes in terms of surface plasmon resonance. In this research, the effect of Ag and Au nanoparticles with spherical and rod shapes on the light extraction efficiency and the FWHM of OLED structures was investigated using the finite difference time domain (FDTD) method. The simulation results displayed that by changing the shape and size of Ag and Au nanostructures, the emission wavelength can be adjusted, and the FWHM can be reduced. The presence of Ag and Au nanoparticles in the OLEDs showed a blue and red shift of the emission wavelength, respectively. Also, the Ag and Au nanorods caused a significant reduction in the FWHM and a shift to the longer wavelengths in the structures. The structures containing Ag nanorods showed the narrowest FWHM and longer emission wavelength than the other structures.

     

Surface Plasmon Resonance and Absorption Features Beyond the Bandedge in ZnO Nanorods Array – Au Heterostructures: Prediction and More Accurate Representation

Plasmonics - Well-oriented zinc oxide nanorods arrays (ZnO NRsA) have been grown on seeded substrates. The morphology, chemical, and vibrational characteristics of the nanostructures were...     

Conventional and microwave-assisted synthesis of ZnO nanorods and effects of PEG400 as a surfactant on the morphology

Conventional and microwave-assisted synthesis of ZnO nanorods have been performed with and without using PEG400. ZnO nanorods were synthesized with 50-250 nm of diameter which depends on the used surfactant and methods. Surfactant effects of PEG400 on the size and morphology of ZnO nanorods were investigated. The microwave method was compared to the conventional heating method. Morphologies were investigated by using scanning electron microscopy (SEM).     

A sensitive diagnostic assay of rheumatoid arthritis using three-dimensional ZnO nanorod structure

We synthesized a three-dimensional nanorod structure of zinc oxide (ZnO) using a simple sol-gel process and systematically investigated properties of the ZnO nanorods regarding protein adsorption and effect on fluorescence emission. As compared to conventional polystyrene plate that has been widely used for strong protein adsorption, the ZnO nanorods had a superior protein adsorption capacity and significantly amplified fluorescence emission, suggesting the ZnO nanorods are attractive for fluorescence-based biomolecular detection assays. When applied to diagnostic assay of rheumatoid arthritis (RA) using cyclic citrullinated peptide (CCP) probe with a RCGRS motif that reportedly has a strong affinity for ZnO, the ZnO nanorods gave apparently high positive signals for all the RA-positive standards and patient sera, whereas upon the detection using conventional polystyrene plate, all the detection signals were relatively negligible. Moreover, the streptavidin-mediated immobilization of well oriented CCP further enhanced sensitivity, even for a 5000-times diluted patient serum. A highly sensitive detection of a very small amount of RA autoantibodies is important because individuals at high risk of developing RA can be identified several years before the clinical onset. Consequently, the fluorescence-based sensitive assay of RA was successfully performed using the three-dimensional ZnO nanorods, owing to the fluorescence amplification and protein/peptide adsorption properties and dimensionality of ZnO nanorods that in turn increases probe accessibility to anti-CCP RA autoantibodies. Although RA was assayed here for proof-of-concept, the ZnO nanorods-based assay can be applied in general to sensitive detection of a wide variety of antibody or protein targets.     

Fabrication of chitin-chitosan/nano ZrO(2) composite scaffolds for tissue engineering applications

The urge to repair and regenerate natural tissues can now be satisfactorily fulfilled by various tissue engineering approaches. Chitin and chitosan are the most widely accepted biodegradable and biocompatible materials subsequent to cellulose. The incorporation of nano ZrO₂ onto the chitin-chitosan scaffold is thought to enhance osteogenesis. Hence a nanocomposite scaffold was fabricated by lyophilization technique using chitin-chitosan with nano ZrO₂. The prepared nanocomposite scaffolds were characterized using SEM, FTIR, XRD and TGA. In addition, the swelling, degradation, biomineralization, cell viability and cell attachment of the composite scaffolds were also evaluated. The results demonstrated better swelling and controlled degradation in comparison to the control scaffold. Cell viability studies proved the non toxic nature of the nanocomposite scaffolds. Cells were found to be attached to the pore walls and spread uniformly throughout the scaffolds. All these results suggested that the developed nanocomposite scaffolds possess the prerequisites for tissue engineering scaffolds and could be used for various tissue engineering applications.     

Investigation on the pH‐independent photoluminescence emission from carbon dots impregnated on polymer matrix

Highly luminescent, polymer nanocomposite films based on poly(vinyl alcohol) (PVA), and monodispersed carbon dots (C‐dots) derived from multiwalled carbon nanotubes (MWCNTs), as coatings on substrates as well as free standing ones are obtained via solution‐based techniques. The synthesized films exhibit pH‐independent photoluminescence (PL) emission, which is an advantageous property compared with the pH‐dependent photoluminescence intensity variations, generally observed for the C‐dots dispersed in aqueous solution. The synthesized C‐dots and the nanocomposite films are characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infra‐red spectroscopy ( FTIR), ultraviolet (UV) ? visible spectroscopy and photoluminescence spectroscopy (PL) techniques. The TEM image provides clear evidence for the formation of C‐dots of almost uniform shape and average size of about 8 nm, homogeneously dispersed in aqueous medium. The strong anchoring of C‐dots within the polymer matrix can be confirmed from the XRD results. The FTIR spectral studies conclusively establish the presence of oxygen functional groups on the surfaces of the C‐dots. The photoluminescence (PL) emission spectra of the nanocomposite films are broad, covering most part of the visible region. The PL spectra do not show any luminescence intensity variations, when the pH of the medium is changed from 1 to 11. The pH‐independent luminescence, shown by these films offers ample scope for using them as coatings for designing diagnostic and imaging tools in bio medical applications. The non‐toxic nature of these nanocomposite films has been established on the basis of cytotoxicity studies.     

Studies of Electronic Excitations of Rectangular ZnO Nanorods by Electron Energy-Loss Spectroscopy

Electronic excitations of single ZnO rectangular nanorod have been investigated by electron energy-loss spectroscopy in conjunction with scanning transmission electron microscopy (STEM-EELS). We focus primarily on the surface excitations greatly enhanced at the grazing incidence parallel to the surfaces of ZnO nanorods. An uncommon kind of surface excitation known as surface exciton polaritons occurring near interband transitions is found to dominate in the spectral range between the band gap at 3.4 eV and the surface plasmon peak at 15.8 eV. In addition, the dielectric function of ZnO up to 25 eV has also been derived from the bulk excitation spectra using the Kramers–Kronig analysis on a single nanorod. Theoretical EELS simulations are also compared with the experimental results and good agreements are obtained.     

Toward a Low‐Cost Artificial Leaf: Driving Carbon‐Based and Bifunctional Catalyst Electrodes with Solution‐Processed Perovskite Photovoltaics

Molecular hydrogen can be generated renewably by water splitting with an “artificial‐leaf device”, which essentially comprises two electrocatalyst electrodes immersed in water and powered by photovoltaics. Ideally, this device should operate efficiently and be fabricated with cost‐efficient means using earth‐abundant materials. Here, a lightweight electrocatalyst electrode, comprising large surface‐area NiCo₂O₄ nanorods that are firmly anchored onto a carbon–paper current collector via a dense network of nitrogen‐doped carbon nanotubes is presented. This electrocatalyst electrode is bifunctional in that it can efficiently operate as both anode and cathode in the same alkaline solution, as quantified by a delivered current density of 10 mA cm^?2 at an overpotential of 400 mV for each of the oxygen and hydrogen evolution reactions. By driving two such identical electrodes with a solution‐processed thin‐film perovskite photovoltaic assembly, a wired artificial‐leaf device is obtained that features a Faradaic H₂ evolution efficiency of 100%, and a solar‐to‐hydrogen conversion efficiency of 6.2%. A detailed cost analysis is presented, which implies that the material‐payback time of this device is of the order of 100 days.     

A review on biological synthesis of ZnO nanostructures and its application in photocatalysis mediated dye degradation: An overview

Zinc oxide (ZnO) has several industrial applications due to its versatile properties, which lead to its continuously increasing demand in different industrial sectors. Additionally, ZnO nanostructures possess unique photocatalytic activity, and because of this, they are being applied to degrade organic dyes through photocatalysis for wastewater treatment. Nevertheless, chemical synthesis methods to develop ZnO nanostructures have raised concerns related to environmental issues, furthermore, these methods are found to be costly and tedious. As a result, the synthesis of ZnO nanostructures using green methods is gaining popularity due to its low cost and eco-friendly mode, while avoiding the use of toxic chemicals. Green synthesis of ZnO nanostructures using different biological approaches involving plants, algae, and different microorganism-derived bioactive compounds has been well reported for diverse applications. Among different applications, ZnO nanostructures that enable photocatalysis to degrade dye have been found to be imperative for wastewater treatments. Therefore, the current review explores recent studies on green synthesis approaches to prepare ZnO nanostructures via adopting different biological methods that rely on plants, algae, and bacterial microorganisms. The properties of ZnO nanostructures, along with their green synthesis routes and feasible mechanisms, have also been discussed in this review. This review focuses on the use and efficiency of green route synthesized ZnO nanostructures as nanophotocatalysts for the degradation of organic dyes in wastewater treatment. Additionally, existing challenges in green synthesis methods and the efficiency of ZnO nanostructures to degrade organic dyes following photocatalysis has been discussed.     

Second harmonic imaging of plants tissues and cell implosion using two‐photon process in ZnO nanoparticles

The optical properties of colloidal ZnO nanoparticle (NP) solutions, with size ranging from several nm to around 200 nm, have been tailored to have high optical nonlinearity for bioimaging with no auto‐fluorescence above 750 nm and minimal auto‐fluorescence below 750 nm. The high second harmonic conversion efficiency enables selective tissue imaging and cell tracking using tunable near‐infrared femtosecond laser source ranging from 750‐980 nm. For laser energies exceeding the two‐photon energy of the bandgap of ZnO (half of 3.34 eV), the SHG signal greatly decreases and the two‐photon emission becomes the dominant signal. The heat generated due to two‐photon absorption within the ZnO NPs enable selective cell or localized tissue destruction using excitation wavelength ranging from 710–750 nm. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Tuneable luminescence properties of EDTA‐assisted ZnS:Mn nanocrystals from a yellow‐orange to a red emission band

Luminescence technology has been improved with the help of semiconductor nanoparticles that possess novel optical and electrical properties compared with their bulk counterpart. The aim of this study was to design semiconductor nanocrystals in their pure (ZnS) or doped form (ZnS:Mn) with different concentrations of Mn²⁺ ions by a wet chemical route stabilized by ethylenediamine tetra‐acetic acid (EDTA) and to evaluate their luminescence properties. The nanocrystals were characterized by physicochemical techniques such as X‐ray diffraction (XRD), High‐resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SEAD), EDS, and ultraviolet (UV)–visible light and photoluminescence (PL) studies. These results showed the presence of cubic phase and spherically shaped nanocrystals. A blue shift with respect to their bulk counterpart was observed. PL emission spectra were observed with a fixed blue peak and the yellow‐orange bands were red shifted towards the red region under the same excitation wavelength. The orange‐red bands were attributed to the radiation transition of electrons in 3d5 unfilled shells of Mn²⁺ ions [⁴T₁(⁴G)‐⁶A₁(⁶S)]; the ZnS matrix varied with Mn²⁺ concentration. Shift and increase in the intensity of the PL and absorption bands were observed with increase in Mn content. The study showed that Mn²⁺‐doped ZnS nanocrystal emission bands can be tuned from the yellow‐orange to the red regions under a controlled synthesis process and could be used as promising luminescent emitters in the biology field upon functionalization with suitable materials. Further studies on construction with various other materials will be useful for practical applications.     

Tungsten–Carbon Nanotube Composite Photonic Crystals as Thermally Stable Spectral‐Selective Absorbers and Emitters for Thermophotovoltaics

Thermophotovoltaics (TPVs) is a promising energy conversion technology which can harvest wide‐spectrum thermal radiation. However, the manufacturing complexity and thermal instability of the nanophotonic absorber and emitter, which are key components of TPV devices, significantly limit their scalability and practical deployment. Here, tungsten–carbon nanotube (W‐CNT) composite photonic crystals (PhCs) exhibiting outstanding spectral and angular selectivity of photon absorbance and thermal emission are presented. The W‐CNT PhCs are fabricated by nanoscale holographic interferometry‐based patterning of a thin‐film catalyst, modulated chemical vapor deposition synthesis of high‐density CNT forest nanostructures, and infiltration of the CNT forests with tungsten via atomic layer deposition. Owing to their highly stable structure and composition, the W‐CNT PhCs exhibit negligible degradation of optical properties after annealing for 168 hours at 1273 K, which exceeds all previously reported high‐temperature PhCs. Using the measured spectral properties of the W‐CNT PhCs, the system efficiency of a GaSb‐based solar TPV (STPV) that surpasses the Shockley–Queisser efficiency limit at modest operating temperatures and input powers is numerically predicted. These findings encourage further practical development of STPVs, and this scalable fabrication method for composite nanostructures could find other applications in electromagnetic metamaterials.     

Fabrication and growth mechanism of ZnO nanostructures and their cytotoxic effect on human brain tumor U87, cervical cancer HeLa,and normal HEK cells

ZnO nanostructures of diverse shape were grown via a solution process with different precursors and conditions. Morphological investigation of the nanostructures was carried out using field emission scanning electron microscopy and transmission microscopy observations and revealed that the nanostructures exhibit a wurtzite phase with an ideal lattice fringe distance of approximately 0.52 nm. The powder crystallinity was examined via X-ray diffraction spectroscopy. Screening results from anticancer studies of the effects on human brain tumor U87, cervical cancer HeLa, and normal HEK cells of ZnO nanostructures of diverse shape were obtained and indicate promising activity that varies with changes in the structure and the size of the particles. Treatment-induced cell death [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide and survival assay], growth inhibition, cytogenetic damage (formation of micronuclei), and apoptosis were studied as parameters for the cellular response. Treatment with nanostructures enhanced growth inhibition and cell death in a concentration-dependent manner in both U87 and HeLa cell lines. At higher concentrations (above 15.6 μg/ml) the cytotoxic effects of the nanoparticles were highly synergistic and mainly mediated through apoptosis, implying the possible interactions of lesions caused by the agents. The enhanced cell death due to nanoparticles was accompanied by a significant increase (2–3 fold at 31.25 μg/ml) in the formation of micronuclei in U87 cells. The increase in the formation of micronuclei observed after treatment indicates that these structures may interfere with the rejoining of DNA strand breaks. Among all the nanostructures, nanoparticles and sheets exhibited potent activity against both HeLa and U87 cells. However, despite potent in vitro activity, all nanostructures exhibited diminished cytotoxicity against normal human HEK cells at all effective concentrations.     

Gamma–Radiation-Assisted Synthesis of Luminescent ZnO/Ag Heterostructure Core–Shell Nanocomposites

There is increasing interest in tuning the physical properties of semiconductor nanostructures using metal nanoparticles. In this work, ZnO nanosphere covered with Ag nanoparticles were synthesized using gamma–radiation-assisted method. The amount of deposited Ag nanoparticles is controlled by changing irradiation dose in the range of 30–100 kGy in order to tune the semiconductor–metal interaction. The successful deposition of Ag on the ZnO nanoparticles is examined by analyzing the morphology, microstructure, optical, and magnetic properties of ZnO/Ag nanoparticles through field emission scanning electron (FESEM), microscopy X-ray diffraction spectra, UV-visible absorption, photoluminescence measurement, and vibrating sample magnetometer. FESEM and elemental mapping results confirmed that Ag nanoparticles have been concentrated at the surface of spherical ZnO particles. Moreover, formation of pure metallic Ag nanoparticles has been confirmed by XRD analysis. UV-visible absorption spectra of obtained ZnO/Ag showed two combined peaks, a weak peak at the shoulder around 360 nm corresponds to ZnO and a sharp absorption at 420 nm refers to spherical Ag nanoparticles. Obtained results from photoluminescence revealed that the near-band-edge emission and defect-related visible emission bands of ZnO could be enhanced dramatically at the same time by deposition of Ag nanoparticles, which was ascribed to localized surface plasmon–exciton coupling and surface plasmon scattering. Controlling the semiconductor and metal coupling effect is interesting because of its application in highly efficient optoelectronic devices and biosensor.