Copper nanoclusters as fluorescence‐quenching probes for the quantitative analysis of total iodine

Tannic acid‐coated copper nanoclusters (CuNCs@TA) were synthesized and used quantitatively to analyze iodine in kelp. Compared with other methods for iodine detection, the proposed method showed excellent performance. The iodine‐induced linear decrease in the fluorescence intensity of CuNCs@TA allowed the quantitative detection of iodine in the range 20–100 μM, and the limit of detection for iodine was 18 nM. The probe can be used for the determination of iodine in real samples with reliable and accurate results. Modified Stern–Volmer equation and thermodynamic calculation studies were used to discuss the quenching mechanism.     

Effects of chromium toxicity on leaf photosynthetic characteristics and oxidative changes in wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

Cr(VI) significantly reduced rates of net photosynthesis and transpiration and of stomatal conductance. Cr(VI) did not affect the F_v/F_m ratio of chlorophyll fluorescence implying that the primary photochemical processes in photosystem 2 were not affected. However, the efficiency of excitation capture by open PS2 centres, in vivo quantum yield of PS2 photochemistry, and electron transport rate were significantly reduced by Cr(VI). The coefficient of photochemical quenching was reduced with a concomitant increase in coefficient of non-photochemical quenching, suggesting reduced demand for ATP and NADPH due to inhibition of CO₂ assimilation. Lipid peroxidation was increased by Cr(VI) and the activities of superoxide dismutase and catalase (CAT) were increased. However, the CAT activity was reduced by high Cr(VI) concentration. The activities of ascorbate peroxidase and glutathione reductase were significantly reduced by Cr(VI) treatment.     

Spectroscopic investigation on the interaction of Cr(VI) with bovine serum albumin

The interaction of potassium dichromate (Cr(VI)) with bovine serum albumin (BSA) was investigated by fluorescence, synchronous fluorescence, resonance light scattering (RLS), ultraviolet-visible absorption, and circular dichroism (CD) spectroscopies under simulated physiological conditions. The experimental results showed that Cr(VI) could quench the intrinsic fluorescence of BSA following a static quenching process, which indicates the formation of a Cr(VI)-BSA complex. The binding constant (KA) and binding site (n) were measured at different temperatures. The spectroscopic results also revealed that the binding of Cr(VI) to BSA can lead to the loosening of the protein conformation and can change the microenvironment and skeleton of BSA.     

Selective fluorescence quenching of papain–Au nanoclusters by self‐polymerization of dopamine

In this paper, we synthesized a papain‐stabilized fluorescent Au nanocluster (NC) probe and studied its interaction with dopamine. As fluorescence of papain–Au NCs is quenched in the presence of dopamine under alkaline conditions, we were able to establish a simple, selective analytical method for dopamine determination. By studying the fluorescence lifetime and dynamic light scattering of the NCs before and after interaction with dopamine, we found that this fluorescence quenching mechanism was possibly due to dopamine self‐polymerization that produced polydopamine that cross‐linked papain–Au NCs. Based on this new phenomenon, we proposed a highly selective analytical method for dopamine detection. Other small organic molecules, such as amino acids, ascorbic acid and uric acid did not interfere with dopamine detection. Dopamine in the range 20–100 μM can be linearly detected by the fluorescence quenching ratio of gold nanoclusters. Dopamine detection could be visually realized by watching color changes of papain–Au NCs under UV light or daylight, as both fluorescence and absorption of the papain–Au NCs changed during dopamine polymerization.     

Arginine‐derived carbon nanoparticles for determination of Cr(VI) in water samples

Hexavalent chromium, Cr(VI), is a toxic and carcinogenic ion that poses significant risks toward human health and the environment. Due to its extensive industrial use and high water solubility, Cr(VI) can easily contaminate drinking water sources. Therefore, it is essential to develop methods to detect Cr(VI) in water samples. Recently, carbon quantum dots – being biocompatible, easy to synthesize, and cost‐effective fluorophores – have been successfully applied for the determination of different heavy metal ions. In this study, arginine‐derived carbon nanoparticles were synthesized using a solvent‐free one‐pot thermal method. These carbon nanoparticles were characterized using transmission electron microscopy, dynamic light scattering analysis, infrared spectroscopy, ultraviolet–visible (UV–vis) light spectroscopy, fluorescence spectroscopy, and CHNO elemental analysis before being used to design a sensor for Cr(VI). The sensor's signal was optimized and the arginine‐derived carbon nanoparticle‐based Cr(VI) determination method was shown to have a limit of detection of 18 nM, a limit of quantification of 60 nM, and a linear response range of 0.06–100 μM. The sensor's selectivity toward Cr(VI) was studied and a potential interfering ion was identified and dealt with. Finally, the sensor was successfully applied for the determination of Cr(VI) in tap water and mineral water samples.     

Short-term chromium(VI) stress induces different photosynthetic responses in two duckweed species, <Emphasis Type="Italic">Lemna gibba</Emphasis> L. and <Emphasis Type="Italic">Lemna mino</Emphasis>r L.

Physiological responses of two duckweed species, Lemna gibba and Lemna minor, to hexavalent chromium [Cr(VI)] were studied in axenic cultures using short-term (48 h) treatments by K₂Cr₂O₇ (0–200 μM). Chlorophyll (Chl) fluorescence parameters and photosynthetic pigment composition of plants were screened to determine the effects of Cr(VI) exposures. The two duckweed species exhibited different sensitivity in the applied Cr(VI) concentration range. Chl fluorescence parameters of dark-adapted and light-adapted plants and electron transport inducibility were more sensitive to Cr(VI) in L. minor than in L. gibba. We also found fundamental differences in quantum yield of regulated, Y(NPQ), and nonregulated, Y(NO), non-photochemical quenching between the two species. As Cr(VI) concentration increased in the growth medium, L. minor responded with considerable increase of Y(NPQ) with a parallel significant increase of Y(NO). By contrast, in L. gibba only 200 μM Cr(VI) in the growth medium resulted in elevation of Y(NPQ) while Y(NO) remained more or less constant within the regarding Cr(VI) concentration range during 48 h. Photosynthetic pigment content did not change considerably during the short-term Cr(VI) treatment but decrease of Chl a/b and increase of Car/Chl ratios were observed in good accordance with the changes in Chl fluorescence parameters. The data suggest that various duckweed species respond with different sensitivity to the same ambient concentrations of Cr(VI) in the growth medium, and presumably to other environmental stresses too, which may have an influence on their competitive relations when heavy metal pollution occurs in aquatic ecosystem.     

荧光银纳米团簇的生物合成及其在痕量六价铬检测中的应用

[目的]利用季也蒙毕赤酵母ZJC-1合成银纳米团簇并用于痕量Cr(Ⅵ)的检测.[方法]使用经耐银驯化的季也蒙毕赤酵母ZJC-1生物合成荧光银纳米团簇,并对其结构和荧光性能进行了表征,探究Cr(Ⅵ)对银纳米团簇荧光的选择性猝灭作用,建立了银纳米团簇荧光强度与Cr(Ⅵ)浓度的线性关系.同时还考察了体系pH和其他金属离子对C...     

Superquenching as a detector for microsphere-based flow cytometric assays.

BACKGROUND: Fluorescent conjugated polymers display high fluorescence quantum yields and enhanced sensitivity to quenching (superquenching) by oppositely charged quenchers through energy or electron transfer. Fluorescent polymers and their quenchers are used in bead-based biosensor applications where the polymers are coated on particles. In this work, we investigate a detection method that utilizes superquenching on microspheres, which can be used for flow cytometric assays. METHODS: Microspheres were coated with the fluorescent cationic polyelectrolyte poly(p-phenylene-ethynylene) (PPE), and its superquenching by 9,10-anthraquinone-2,6-disulfonic acid (AQS) was examined by fluorometric methods in presence and in absence of a barrier to superquenching in the form of an anionic lipid bilayer. RESULTS: Flow cytometry detected superquenching of PPE on microspheres (MS-PPE) by AQS where high levels of reduction in fluorescence were observed. Adding different concentrations of AQS to MS-PPE yielded a Stern-Volmer quenching constant of 0.8x10(6) M-1. While forming an anionic lipid bilayer around the MS-PPE acted as a barrier to superquenching by AQS, disrupting the lipid bilayer allowed superquenching to take place. CONCLUSIONS: The sensitivity of flow cytometry in detecting fluorescence of microspheres and the amplified quenching sensitivity of fluorescent conjugated polymers both offer advantages over other fluorometric methods and conventional quenching detection. This study used superquenching of fluorescent polymers as a new tool in flow cytometry, thus combining the advantages offered by both method and detector. In addition, we employed the formation and the disruption of a supported lipid bilayer in mediating superquenching to offer new biosensing applications.     

A new anti-counterfeiting method: fluorescent labeling by safranine T in tobacco seed

Counterfeit seeds cause a large loss in seed industry and crop production. Present study was undertaken to find a new anti-counterfeiting technology by labeling seeds with a fluorescent compound, safranine T (ST). Response surface analysis (RSA) experiment with two factors (ST concentration and seed soaking time) of 14 combinations was performed to investigate the ST effects on seed vigor and fluorescence showing in seedlings of two tobacco varieties, MS Yunyan 85 and Honghua Dajinyuan. After soaking in ST solutions, tobacco seeds were germinated for 16 days, then the germination index (GI), vigor index (VI), length of roots and shoots were determined. The optimum combinations of ST concentration and soaking time on GI, VI and length of shoots and roots were 0.57–0.69 mg/ml and 6.77–9.34 h for MS Yunyan 85 and 0.51–0.80 mg/ml and 5.81–7.39 h for Honghua Dajinyuan, respectively. Meanwhile, tobacco seedlings, treated with ST solutions from 0.3 to 1.5 mg/ml showed obviously fluorescence under illumination of green light. It suggests that soaking tobacco seeds in safranine T solution of suitable concentration can be used as a labeling technique for anti-counterfeiting in tobacco seeds.     

One‐step synthesis of nitrogen,boron co‐doped fluorescent carbon nanoparticles for glucose detection

Heteroatom‐doped carbon nanoparticles (CNPs) have attracted considerable attention due to an effective improvement in their intrinsic properties. Here, a facile and simple synthesis of nitrogen, boron co‐doped carbon nanoparticles (NB‐CNPs) from a sole precursor, 3‐aminophenylboronic acid, was performed via a one‐step solid‐phase approach. Because of the presence of boronic acid, NB‐CNPs can be used directly as a fluorescent probe for glucose. Based on a boronic acid‐triggered specific reaction, we developed a simple NB‐CNP probe without surface modification for the detection of glucose. When glucose was introduced, the fluorescence of NB‐CNPs was suppressed through a surface‐quenching states mechanism. Obvious fluorescence quenching allowed the highly sensitive determination of glucose with a limit of detection of 1.8 μM. Moreover, the proposed method has been successfully used to detect glucose in urine from people with diabetes, suggesting potential application in sensing glucose.     

Rectangular coordination polymer nanoplates: large-scale, rapid synthesis and their application as a fluorescent sensing platform for DNA detection

In this paper, we report on the large-scale, rapid synthesis of uniform rectangular coordination polymer nanoplates (RCPNs) assembled from Cu(II) and 4,4'-bipyridine for the first time. We further demonstrate that such RCPNs can be used as a very effective fluorescent sensing platform for multiple DNA detection with a detection limit as low as 30 pM and a high selectivity down to single-base mismatch. The DNA detection is accomplished by the following two steps: (1) RCPN binds dye-labeled single-stranded DNA (ssDNA) probe, which brings dye and RCPN into close proximity, leading to fluorescence quenching; (2) Specific hybridization of the probe with its target generates a double-stranded DNA (dsDNA) which detaches from RCPN, leading to fluorescence recovery. It suggests that this sensing system can well discriminate complementary and mismatched DNA sequences. The exact mechanism of fluorescence quenching involved is elucidated experimentally and its use in a human blood serum system is also demonstrated successfully.     

Multifunctional organic–inorganic composite luminescent nanospheres

A simple general strategy was successfully developed for the preparation of magnetic–luminescent multifunctional nanocomposites by incorporating fluorescent (pyrene) and magnetic (Fe₃O₄) components simultaneously into a poly(styrene‐co‐methacrylic acid) [poly(St‐co‐MAA)] copolymer matrix. The nanospheres so prepared were characterized using scanning electron microscopy (SEM), powder X‐ray diffraction (XRD) and Fourier transform infrared (FTIR) analysis. The prepared magnetic–fluorescent inorganic–organic nanocomposites have excellent magnetic and photoluminescent properties. They can be used in magnetic separation of trace amounts of sample, fluorescence detection and imaging applications, including magnetic resonance imaging (MRI) and fluorescence imaging. The fluorescence quenching of the nanospheres in the presence of different amounts of Cu²⁺ ions was also investigated. Under optimal experimental conditions, the relative fluorescence intensity of the composite nanosphere colloidal solution is proportional to the concentration of Cu²⁺ ions, which indicates that these multifunctional nanocomposites can be used for the magnetic separation and fluorescence detection of Cu²⁺ ions. Copyright © 2011 John Wiley & Sons, Ltd.     

One-step hydrothermal preparation of chiral carbon quantum dots and enantioselective sensing of glutamine enantiomeric isomers

A novel method for chiral identification of glutamine enantiomers based on chiral carbon quantum dots (cCQDs) fluorescent probes. cCQDs were prepared using a one-step hydrothermal method with L-tryptophan as the carbon source and chiral source, producing spherical nanoparticles exhibiting a blue colour luminescence. The fluorescence intensity (F) of cCQDs was enhanced or quenched following the addition of chiral enantiomeric glutamine (L/D-Gln), and therefore cCQDs, as a fluorescence probe, could be used for enantioselective sensing of the L/D-Gln. The fluorescence enhancement value (∆F_E) exhibited good linearity with L-Gln concentration in the range 0.23–10.00 mM, and the limit of detection was 0.14 mM. The fluorescence quenching value (∆F_Q) showed a good linear relationship with D-Gln concentration in the range 0.29–10.00 mM, and the detection limit was 0.18 mM. The mechanism of fluorescence enhancement/quenching was explored by molecular modelling and the type of quenching. The method was applied to the determination of L-Gln content in real samples, and the recovery rate was satisfactory. This study provided a novel approach for the synthesis of cCQDs and the recognition of amino acid enantiomers.     

Bioreduction of hexavalent chromium by <Emphasis Type="Italic">Pseudomonas stutzeri</Emphasis> L1 and <Emphasis Type="Italic">Acinetobacter baumannii</Emphasis> L2

Bioreduction of the very toxic hexavalent chromium ion [Cr(VI)] to the non-toxic trivalent chromium ion [Cr(III)] is a key remediation process in chromium-contaminated sites. In this study, we investigated the bioreduction of Cr(VI) by Pseudomonas stutzeri L1 and Acinetobacter baumannii L2. The optimum pH (5–10), temperature (27, 37 and 60 °C) and initial chromium Cr(VI) concentration (100–1000 mg L^?1) for Cr(VI) reduction by strains L1 and L2 were determined using the diphenylcarbazide method. In the presence of L1 and L2, the bioreduction rate of Cr(VI) was 40–97 and 84–99%, respectively. The bioreduction of Cr(VI) by L2 was higher, reaching up to 84%—than that by L1. The results showed that strain L2 was able to survive even if exposed to 1000 mg L^?1 of Cr(VI) and that this tolerance to the effects of Cr(VI) was linked to the activity of soluble enzyme fractions. Overall, A. baumannii L2 would appear to be a potent Cr(VI)-tolerant candidate for the bioremediation of chromium (VI)-contaminated wastewater effluent.     

Metal ion-mediated carbon dot nanoprobe for fluorescent turn-on sensing of N-acetyl-l-cysteine

In this work, carbon dots (CDs) was easily synthesized from aspartic acid through a pyrolysis method. Based on their favourable fluorescence properties, CDs were utilized to design a metal ion-mediated fluorescent probe for N-acetyl-l -cysteine (NAC) detection. The fluorescence intensity of CDs was firstly quenched by manganese ions (Mn²⁺) through static quenching effect and subsequently restored by NAC via the combination with Mn²⁺ due to the coordination effect. Therefore, the fluorescent turn-on sensing of NAC was actuated based on the fluorescence quenching stimulated by Mn²⁺ and recovery induced by coordination. The fluorescence recovery efficiencies showed a proportional range to the concentration of NAC in the range 0.04–5 mmol L⁻¹ and the detection limit was 0.03 mmol L⁻¹. Furthermore, this metal ion-mediated fluorescent nanoprobe was applied to human urine sample detection and the standard recovery rates were located in the range 97.62–102.34%. This was the first time that Mn²⁺ was used to construct a fluorescent nanoprobe for NAC. Compared with other heavy metal ions, Mn²⁺ with good biosecurity prevented the risk of application, which made the nanoprobe green and biopractical. The facile synthesis of CDs and novel metal ion-mediated sensing mode made it a promising method for pharmaceutical analysis.     

Silver‐doped graphite carbon nitride nanosheets as fluorescent probe for the detection of curcumin

Green fluorescent silver (Ag)‐doped graphite carbon nitride (Ag‐g‐C₃N₄) nanosheets have been fabricated by an ultrasonic exfoliating method. The fluorescence of the Ag‐g‐C₃N₄ nanosheets is quenched by curcumin. The fluorescence intensity decreases with the increase in the concentration of curcumin, indicating that the Ag‐g‐C₃N₄ nanosheets can function as a non‐toxic and facile fluorescence probe to detect curcumin. The fluorescence intensity of Ag‐g‐C₃N₄ nanosheets shows a linear relationship to curcumin in the concentration range 0.01–2.00 μM with a low detection limit of 38 nM. The fluorescence quenching process between curcumin and Ag‐g‐C₃N₄ nanosheets mainly is based on static quenching. The fluorescent probe has been successfully applied to analyse curcumin in human urine and serum samples with satisfactory results.     

Kinetic assay of fluorescein mono-beta-D-galactoside hydrolysis by beta-galactosidase: a front-face measurement for strongly absorbing fluorogenic substrates

A novel enzymatic assay method was developed for fluorogenic substrates that have significant intrinsic absorbance and fluorescence under the assay conditions. Fluorescein mono-beta-D-galactoside (FMG) was chosen as the substrate for the fluorescence enzymatic assay because of the high fluorescence of its hydrolytic product (fluorescein) and suitability of being hydrolyzed by beta-galactosidase. The fluorescence-concentration relationships for fluorescein and for FMG in both the right-angle detection mode of a fluorometer and the front-face detection mode of a fluorescence plate reader were exactly established and used to determine the kinetics of the enzyme assay. The results show that only front-face detection in the fluorescence plate reader can overcome the fluorescence concentration quenching that inevitably results from high absorbance by the intrinsically absorbing substrate in the conventional fluorometer, which utilizes right-angle detection. Only with front-face detection was the fluorescent assay of FMG hydrolysis under conditions of high optical density possible. The enzymatic measurements on the fluorescence plate reader were particularly efficient for determination of the enzyme kinetics because of the high rate of data collection. In this assay system, Michaelis-Menten constant Km and enzymatic catalysis rate k2 of FMG were determined as 117.6 microM and 22.7 mumol-(min.mg)-1, respectively. The results and methods described in this paper can be generalized for any assay using a fluorogenic substrate whether or not it has a high background absorbance.     

Assessment of Phytotoxicity of Chromium in Flooded Soils using Embedded Selective Ion Exchange Resin Method

Chromium present in the forms of Cr(VI) or Cr(III) in soils. Since the toxicity and mobility of Cr(VI) are higher than those of Cr(III), it would be important to estimate soil Cr(VI) accurately in order to assess the phytotoxicity of Cr. Soil redox potential can influence the distribution of Cr between Cr(VI) and Cr(III) forms, and thus an in situ method which is not affected by the soil redox condition is needed for determining Cr(VI) availability in paddy fields. In this study, the Cu-saturated selective ion exchange resin (DOWEX M4159), serving as an infinite sink, was embedded in soils to extract available Cr(VI) from three representative saturated soils with different amounts of Cr(VI). The results suggested that Cr(VI) reduction occurred in the flooded soils, and the acid environment favored the adsorption and reduction of Cr(VI). There was a significant dose-response relationship between the soil resin-extractable Cr(VI) and the plant height of rice seedlings for test soils. The experimental results suggested that the embedded selective ion exchange resin method could be a suitable in situ method for assessing the phytotoxicity of Cr in flooded soils.     

Y-shaped probe for convenient and label-free detection of microRNA-21 in vitro

A simple, highly selective, and label-free microRNA (miRNA) detection method based on l-alanine-reduced graphene oxide fluorescence quenching with a Y-shaped probe is proposed. The Y-shaped probe was synthesized by silver nitrate and a cytosine-rich molecular beacon (MB) in two terminals through sodium borohydride reduction, which generated a stronger fluorescent signal than ordinary DNA-templated silver nanoclusters (AgNCs). Meanwhile, the Y-shaped probe contained a single-stranded loop structure, which could be superbly adsorbed onto the surface of reduced graphene oxide (RGO) via π–π stacking interaction, and this special structure of the probe was designed to improve its sensitivity and selectivity. In addition, the quenching capacities of graphene oxide (GO) and RGO were compared in this research. The strong interaction between nucleobases of the loop structure and RGO nanosheet made the MB-AgNCs-RGO system exhibit minimal background fluorescence. In the presence of miRNA-21, the loop structure of the Y-shaped probe can hybridize with target miRNA-21; the molecular beacon encapsulated probe is far away from RGO surface and produces a detectable signal. The MB-AgNCs based approach provides a label-free avenue to detect miRNA with high selectivity and good reproducibility, which has a promising application in early clinical diagnosis and biomedical research.     

Selective detection of nitrofurantoin by histidine-capped silver nanoclusters with blue luminescence

In view of the significance of nitrofurantoin, there is an urgent need for efficient analytical methods for accurate detection of nitrofurantoin. Considering their superior fluorescence performance and rarity of reports regarding nitrofurantoin detection by fluorescent silver nanoclusters (Ag NCs), Ag NCs with good stability and uniform size were synthesized through a simple method by protection of histidine (His) and reduction of ascorbic acid (AA). Based on the quenching by nitrofurantoin, Ag NCs were applied successfully in the detection of nitrofurantoin with high sensitivity. In the range of 0.5–150 μM, a linear relationship was found between ln(F₀/F) and nitrofurantoin amounts. Static quenching and inner filter effect were proved to be the main quenching mechanisms. Significantly superior selectivity and satisfactory recovery results in bovine serum indicate that Ag NCs provide a better choice for nitrofurantoin detection.