Lactococcin Q, a novel two-peptide bacteriocin produced by Lactococcus lactis QU 4

A bacteriocin-producing strain, Lactococcus lactis QU 4, was isolated from corn. The bacteriocin, termed lactococcin Q, showed antibacterial activity only against L. lactis strains among a wide range of gram-positive indicator strains tested. Lactococcin Q was purified by acetone precipitation, cation exchange chromatography, and reverse-phase chromatography. Lactococcin Q consisted of two peptides, alpha and beta, whose molecular masses were determined to be 4,260.43 Da and 4,018.36 Da, respectively. Amino acid and DNA sequencing analyses revealed that lactococcin Q was a novel two-peptide bacteriocin, homologous to lactococcin G. Comparative study using chemically synthesized lactococcin Q (Qalpha plus Qbeta) and lactococcin G (Galpha plus Gbeta) clarified that hybrid combinations (Qalpha plus Gbeta and Galpha plus Qbeta) as well as original combinations showed antibacterial activity, although each single peptide showed no significant activity. These four pairs of lactococcin peptides acted synergistically at a 1:1 molar ratio and exhibited identical antibacterial spectra but differed in MIC. The MIC of Qalpha plus Gbeta was 32 times higher than that of Qalpha plus Qbeta, suggesting that the difference in beta peptides was important for the intensity of antibacterial activity.     

Mechanistic Properties of the Two-Component Bacteriocin Lactococcin G

Lactococcin G is a bacteriocin whose activity depends on the complementary action of two peptides, termed α and β. Biologically active, synthetic lactococcin G was used to study the mode of action on sensitive cells of Lactococcus lactis. The α and β peptides can bind independently to the target cell surface, but activity requires the complementary peptide. Once bound to the cell surface, the peptides cannot be displaced to the surfaces of other cells. A complex of α and β peptides forms a transmembrane pore that conducts monovalent cations but not protons. Efflux of potassium ions is observed only above pH 5.0, and the rate of efflux increases steeply with the pH. The consequences of cation fluxes for the viability of the target cells are discussed.     

The Lactococcin G Immunity Protein Recognizes Specific Regions in Both Peptides Constituting the Two-Peptide Bacteriocin Lactococcin G

Lactococcin G and enterocin 1071 are two homologous two-peptide bacteriocins. Expression vectors containing the gene encoding the putative lactococcin G immunity protein (lagC) or the gene encoding the enterocin 1071 immunity protein (entI) were constructed and introduced into strains sensitive to one or both of the bacteriocins. Strains that were sensitive to lactococcin G became immune to lactococcin G when expressing the putative lactococcin G immunity protein, indicating that the lagC gene in fact encodes a protein involved in lactococcin G immunity. To determine which peptide or parts of the peptide(s) of each bacteriocin that are recognized by the cognate immunity protein, combinations of wild-type peptides and hybrid peptides from the two bacteriocins were assayed against strains expressing either of the two immunity proteins. The lactococcin G immunity protein rendered the enterococcus strain but not the lactococcus strains resistant to enterocin 1071, indicating that the functionality of the immunity protein depends on a cellular component. Moreover, regions important for recognition by the immunity protein were identified in both peptides (Lcn-α and Lcn-β) constituting lactococcin G. These regions include the N-terminal end of Lcn-α (residues 1 to 13) and the C-terminal part of Lcn-β (residues 14 to 24). According to a previously proposed structural model of lactococcin G, these regions will be positioned adjacent to each other in the transmembrane helix-helix structure, and the model thus accommodates the present results.Lactic acid bacteria (LAB) produce ribosomally synthesized antimicrobial peptides, generally referred to as bacteriocins. There are two main classes of these bacteriocins (8, 22): the class I bacteriocins (often referred to as lantibiotics) that contain the modified amino acid residues lanthionine and/or β-methyllanthionine and the class II bacteriocins that lack modified residues (8). The class II bacteriocins are further divided into four subclasses, IIa, IIb, IIc, and IId (8). Class IIa contains the pediocin-like bacteriocins, which have very similar amino acid sequences, class IIc consists of the cyclic bacteriocins, and the one-peptide, noncyclic bacteriocins that show no sequence similarity to the pediocin-like bacteriocins are placed in class IId (8). The unmodified two-peptide bacteriocins are placed in class IIb. They are unique in that they consist of two different peptides, both of which must be present, in about equal amounts, to obtain optimal antimicrobial activity (25). More than 10 two-peptide bacteriocins have been isolated and characterized (see reference 25 for original references) since the first isolation of such a bacteriocin (lactococcin G) in 1992 (21). For the two-peptide bacteriocins that have been genetically characterized, the genes encoding the two bacteriocin peptides are always found next to each other in the same operon, along with the gene encoding the immunity protein that protects the bacteriocin producer from being killed by its own bacteriocin.Lactococcin G is perhaps the best-characterized two-peptide bacteriocin (12, 18, 19, 21, 24, 26, 27). It consists of the 39-residue α peptide (termed Lcn-α) and the 35-residue β peptide (termed Lcn-β) (Fig. ​(Fig.1A).1A). Like all two-peptide bacteriocins whose mode of action has been studied, lactococcin G causes cell death by rendering the membranes of target cells permeable to various ions (18, 19). Nuclear magnetic resonance (NMR) and circular dichroism (CD) spectroscopy have revealed that the two lactococcin G peptides adopt mainly α-helical structures when they are individually exposed to membrane-like entities (12, 27). Based on the NMR structures and findings from site-directed mutagenesis studies, a structural model of lactococcin G has recently been proposed (23, 26, 27). In this model, the two complementary peptides form parallel helices that span the target cell membrane. The helix-helix segment consists of the N-terminal region of Lcn-α (from about Trp-3 to Gly-22) and the C-terminal region of Lcn-β (from about Tyr-13 to Trp-32). The model also proposes that the cationic C-terminal end (residues 35 to 39, R-K-K-K-H) of Lcn-α is unstructured and forced through the target cell membrane by the membrane potential, thereby positioning the C termini of the two peptides inside the target-cell (Fig. ​(Fig.2).2). The tryptophan-rich N-terminal end of Lcn-β is also proposed to be relatively unstructured and to position itself in the outer membrane interface, thus forcing the N termini of the two peptides to remain on the outer side of the target cell membrane and the helix-helix segment to transverse the membrane (Fig. ​(Fig.2).2). This proposed structure is presumably also valid for the two-peptide bacteriocins enterocin 1071 (4, 5, 11), enterocin C (17), and lactococcin Q (32), since their sequence similarities to lactococcin G (lactococcin G has about 88 and 57% sequence identity to lactococcin Q and enterocin 1071, respectively; enterocin 1071 and enterocin C are identical except for one residue) indicate that these four bacteriocins have similar three-dimensional structures.Open in a separate windowFIG. 1.(A) Amino acid sequence alignment of enterocin 1071 (peptides Ent1071A and Ent1071B) and lactococcin G (peptides Lcn-α and Lcn-β) and the cognate immunity proteins (Ent1071im and LcnGim, respectively). Ent1071A and Lcn-α show 59% sequence identity, whereas Ent1071B and Lcn-β show 54% sequence identity. The immunity proteins consist of 110 amino acid residues each and show 38% sequence identity. Identical amino acid residues are colored in red. (B) Amino acid sequences of the two hybrid peptides. The Lcn-α-Ent1071A hybrid peptide (α-hybrid) is termed α[1-16]/A[14-39] in this study (it is designated α2-4 in reference 24). Residues are numbered according to the corresponding amino acid positions in Lcn-α (Fig. 1A). Residues in orange are derived from Lcn-α, and residues in blue are derived from Ent1071A. The overlapping region (i.e., residues 14 to 16) is marked in red, and this region consists of residues that are identical in Lcn-α and Ent1071A. The α-hybrid peptide contains an additional lysine residue in the C-terminal end derived from Lcn-α (see reference 24 for the construction of the hybrid peptide). The Lcn-β-Ent1071B hybrid peptide (β-hybrid) is termed β[1-13]/B[11-35] in this study (it is designated β1-6 in reference 24). Residues in orange are derived from Lcn-β, and residues in blue are derived from Ent1071B. The overlapping region (i.e., residues 11 to 13) is marked in red, and residues in this region are identical in Lcn-β and Ent1071B.Open in a separate windowFIG. 2.Proposed structural model of lactococcin G. The two peptides (Lcn-α and Lcn-β) form a transmembrane helix-helix structure, with the flexible tryptophan-rich N-terminal end of Lcn-β positioned in the outer membrane interface and the unstructured, highly cationic C-terminal end of Lcn-α inside the target cell membrane. The transmembrane helix-helix segment consists of the N-terminal region of Lcn-α (from about Trp-3 to Gly-22) and the C-terminal region of Lcn-β (from about Tyr-13 to Trp-32). (Adapted from reference 26 with permission of the publisher. Copyright 2008 American Chemical Society.)The sequence of the lactococcin G operon (GenBank accession no. {"type":"entrez-nucleotide","attrs":{"text":"FJ938036","term_id":"238480353","term_text":"FJ938036"}}FJ938036) has been determined, and a gene (lagC) encoding the putative lactococcin G immunity protein has been identified downstream of the two genes encoding the two lactococcin G peptides. Downstream of the two genes encoding the two enterocin 1071 peptides, a gene (entI) encoding the enterocin 1071 immunity protein has been identified (4, 11). The putative lactococcin G immunity protein shows 38% amino acid sequence identity to the enterocin 1071 immunity protein (the sequence of which was obtained from Franz et al. [11]), and both proteins consist of 110 amino acid residues (Fig. ​(Fig.1A).1A). The aim of this study was to identify which peptides or which parts of the peptides of the two-peptide bacteriocins lactococcin G and enterocin 1071 are recognized by these immunity proteins. To achieve this, combinations of wild-type lactococcin G peptides, wild-type enterocin 1071 peptides, and hybrid lactococcin-enterocin peptides were assayed against sensitive strains that were transformed with an expression plasmid carrying either the lactococcin G or the enterocin 1071 immunity gene.     

Characterization and Cloning of the Genes Encoding Enterocin 1071A and Enterocin 1071B, Two Antimicrobial Peptides Produced by Enterococcus faecalis BFE 1071

The pH-neutral cell supernatant of Enterococcus faecalis BFE 1071, isolated from the feces of minipigs in Göttingen, inhibited the growth of Enterococcus spp. and a few other gram-positive bacteria. Ammonium sulfate precipitation and cation-exchange chromatography of the cell supernatant, followed by mass spectrometry analysis, yielded two bacteriocin-like peptides of similar molecular mass: enterocin 1071A (4.285 kDa) and enterocin 1071B (3.899 kDa). Both peptides are always isolated together. The peptides are heat resistant (100°C, 60 min; 50% of activity remained after 15 min at 121°C), remain active after 30 min of incubation at pH 3 to 12, and are sensitive to treatment with proteolytic enzymes. Curing experiments indicated that the genes encoding enterocins 1071A and 1071B are located on a 50-kbp plasmid (pEF1071). Conjugation of plasmid pEF1071 to E. faecalis strains FA2-2 and OGX1 resulted in the expression of two active peptides with sizes identical to those of enterocins 1071A and 1071B. Sequencing of a DNA insert of 9 to 10 kbp revealed two open reading frames, ent1071A and ent1071B, which coded for 39- and 34-amino-acid peptides, respectively. The deduced amino acid sequence of the mature Ent1071A and Ent1071B peptides showed 64 and 61% homology with the α and β peptides of lactococcin G, respectively. This is the first report of two new antimicrobial peptides representative of a fourth type of E. faecalis bacteriocin.     

Lactococcin G is a potassium ion-conducting, two-component bacteriocin.

Lactococcin G is a novel lactococcal bacteriocin whose activity depends on the complementary action of two peptides, termed alpha and beta. Peptide synthesis of the alpha and beta peptides yielded biologically active lactococcin G, which was used in mode-of-action studies on sensitive cells of Lactococcus lactis. Approximately equivalent amounts of both peptides were required for optimal bactericidal effect. No effect was observed with either the alpha or beta peptide in the absence of the complementary peptide. The combination of alpha and beta peptides (lactococcin G) dissipates the membrane potential (delta omega), and as a consequence cells release alpha-aminoisobutyrate, a non-metabolizable alanine analog that is accumulated through a proton motive-force dependent mechanism. In addition, the cellular ATP level is dramatically reduced, which results in a drastic decrease of the ATP-driven glutamate uptake. Lactococcin G does not form a proton-conducting pore, as it has no effect on the transmembrane pH gradient. Dissipation of the membrane potential by uncouplers causes a slow release of potassium (rubidium) ions. However, rapid release of potassium was observed in the presence of lactococcin G. These data suggest that the bactericidal effect of lactococcin G is due to the formation of potassium-selective channels by the alpha and beta peptides in the target bacterial membrane.     

In Vitro Evolution and Affinity-Maturation with Coliphage Qβ Display

The Escherichia coli bacteriophage, Qβ (Coliphage Qβ), offers a favorable alternative to M13 for in vitro evolution of displayed peptides and proteins due to high mutagenesis rates in Qβ RNA replication that better simulate the affinity maturation processes of the immune response. We describe a benchtop in vitro evolution system using Qβ display of the VP1 G-H loop peptide of foot-and-mouth disease virus (FMDV). DNA encoding the G-H loop was fused to the A1 minor coat protein of Qβ resulting in a replication-competent hybrid phage that efficiently displayed the FMDV peptide. The surface-localized FMDV VP1 G-H loop cross-reacted with the anti-FMDV monoclonal antibody (mAb) SD6 and was found to decorate the corners of the Qβ icosahedral shell by electron microscopy. Evolution of Qβ-displayed peptides, starting from fully degenerate coding sequences corresponding to the immunodominant region of VP1, allowed rapid in vitro affinity maturation to SD6 mAb. Qβ selected under evolutionary pressure revealed a non-canonical, but essential epitope for mAb SD6 recognition consisting of an Arg-Gly tandem pair. Finally, the selected hybrid phages induced polyclonal antibodies in guinea pigs with good affinity to both FMDV and hybrid Qβ-G-H loop, validating the requirement of the tandem pair epitope. Qβ-display emerges as a novel framework for rapid in vitro evolution with affinity-maturation to molecular targets.     

The β Subunit of the Heterotrimeric G Protein Triggers the Kluyveromyces lactis Pheromone Response Pathway in the Absence of the γ Subunit

The Kluyveromyces lactis heterotrimeric G protein is a canonical Gαβγ complex; however, in contrast to Saccharomyces cerevisiae, where the Gγ subunit is essential for mating, disruption of the KlGγ gene yielded cells with almost intact mating capacity. Expression of a nonfarnesylated Gγ, which behaves as a dominant-negative in S. cerevisiae, did not affect mating in wild-type and ΔGγ cells of K. lactis. In contrast to the moderate sterility shown by the single ΔKlGα, the double ΔKlGα ΔKlGγ mutant displayed full sterility. A partial sterile phenotype of the ΔKlGγ mutant was obtained in conditions where the KlGβ subunit interacted defectively with the Gα subunit. The addition of a CCAAX motif to the C-end of KlGβ, partially suppressed the lack of both KlGα and KlGγ subunits. In cells lacking KlGγ, the KlGβ subunit cofractionated with KlGα in the plasma membrane, but in the ΔKlGα ΔKlGγ strain was located in the cytosol. When the KlGβ-KlGα interaction was affected in the ΔKlGγ mutant, most KlGβ fractionated to the cytosol. In contrast to the generic model of G-protein function, the Gβ subunit of K. lactis has the capacity to attach to the membrane and to activate mating effectors in absence of the Gγ subunit.     

Analysis of the Two-Peptide Bacteriocins Lactococcin G and Enterocin 1071 by Site-Directed Mutagenesis

The two peptides (Lcn-α and Lcn-β) of the two-peptide bacteriocin lactococcin G (Lcn) were changed by stepwise site-directed mutagenesis into the corresponding peptides (Ent-α and Ent-β) of the two-peptide bacteriocin enterocin 1071 (Ent), and the potencies and specificities of the various hybrid constructs were determined. Both Lcn and, to a lesser extent, Ent were active against all the tested lactococcal strains, but only Ent was active against the tested enterococcal strains. The two bacteriocins thus differed in their relative potencies to various target cells, despite their sequence similarities. The hybrid combination Lcn-α+Ent-β had low potency against all strains tested, indicating that these two peptides do not interact optimally. The reciprocal hybrid combination (i.e., Ent-α+Lcn-β), in contrast, was highly potent, indicating that these two peptides may form a functional antimicrobial unit. In fact, this hybrid combination (Ent-α+Lcn-β) was more potent against lactococcal strains than wild-type Ent was (i.e., Ent-α+Ent-β), but it was inactive against enterococcal strains (in contrast to Ent but similar to Lcn). The observation that Ent-α is more active against lactococci in combination with Lcn-β and more active against enterococci in combination with Ent-β suggests that the β peptide is an important determinant of target cell specificity. Especially the N-terminal residues of the β peptide seem to be important for specificity, since Ent-α combined with an Ent-β variant with Ent-to-Lcn mutations at positions 1 to 4, 7, 9, and 10 was >150-fold less active against enterococcal strains but one to four times more active against lactococcal strains than Ent-α+Ent-β. Moreover, Ent-to-Lcn single-residue mutations in the region spanning residues 1 to 7 in Ent-β had a more detrimental effect on the activity against enterococci than on that against lactococcal strains. Of the single-residue mutations made in the N-terminal region of the α peptide, the Ent-to-Lcn mutations N8Q and P12R in Ent-α influenced specificity, as follows: the N8Q mutation had no effect on activity against tested enterococcal strains but increased the activity 2- to 4-fold against the tested lactococcal strains, and the P12R mutation reduced the activity >150-fold and only ~2-fold against enterococcal and lactococcal strains, respectively. Changing residues in the C-terminal half/part of the Lcn peptides (residues 20 to 39 and 25 to 35 in Lcn-α and Lcn-β, respectively) to those found in the corresponding Ent peptides did not have a marked effect on the activity, but there was an ~10-fold or greater reduction in the activity upon also introducing Lcn-to-Ent mutations in the mid-region (residues 8 to 19 and 9 to 24 in Lcn-α and Lcn-β, respectively). Interestingly, the Lcn-to-Ent F19L+G20A mutation in an Lcn-Ent-β hybrid peptide was more detrimental when the altered peptide was combined with Lcn-α (>10-fold reduction) than when it was combined with Ent-α (~2-fold reduction), suggesting that residues 19 and 20 (which are part of a GXXXG motif) in the β peptide may be involved in a specific interaction with the cognate α peptide. It is also noteworthy that the K2P and A7P mutations in Lcn-β reduced the activity only ~2-fold, suggesting that the first seven residues in the β peptides do not form an α-helix.     

Bacteriocin-Producing Strain of Lactococcus lactis subsp. diacitilactis S50

Lactococcus lactis subsp. diacitilactis S50 produces a bacteriocin, designated bacteriocin S50, which has a narrow antibacterial spectrum. It was active only against Lactococcus species, including a nisin producer exhibiting a bactericidal effect. The activity of bacteriocin S50 was sensitive to proteases. It retained antimicrobial activity after being heated to 100°C for up to 60 min and in the pH range 2 to 11.     

Detection and characterization of a bacteriocin produced by Lactococcus lactis subsp. cremoris R isolated from radish

Bacteria isolated from radish were identified as Lactococcus lactis subsp. cremoris R and their bacteriocin was designated lactococcin R. Lactococcin R was sensitive to some proteolytic enzymes (proteinase-K, pronase-E, proteases, pepsin, α-chymotrypsin) but was resistant to trypsin, papain, catalase, lysozyme and lipase, organic solvents, or heating at 90 °C for 15, 30 and 60 min, or 121 °C for 15 min. Lactococcin R remained active after storage at −20 and −70 °C for 3 months and after exposure to a pH of 2–9. The molecular weight of lactococcin R was about 2·5 kDa. Lactococcin R was active against many food-borne pathogenic and food spoilage bacteria such as Clostridium, Staphylococcus, Listeria, Bacillus, Micrococcus, Enterococcus, Lactobacillus, Leuconostoc, Streptococcus and Pediococcus spp., but was not active against any Gram-negative bacteria. Lactococcin R was produced during log phase and reached a maximum activity (1600 AU ml⁻¹) at early stationary phase. The highest lactococcin R production was obtained in MRS broth with 0·5% glucose, at 6·5–7·0 initial pH values, 30 °C temperature and 18–24-h incubation times. Lactococcin R adsorbed maximally to its heat-killed producing cells at pH 6–7 (95%). Crude lactococcin R at 1280 AU ml⁻¹ was bactericidal, reducing colony counts of Listeria monocytogenes by 99·98% in 3 h. Lactococcin R should be useful as a biopreservative to prevent growth of food-borne pathogenic and food spoilage bacteria in ready-to-eat, dairy, meat, poultry and other food products. Lactococcin R differs from nisin in having a lower molecular weight, 2·5 kDa vs 3·4 kDa, and in being sensitive to pepsin and α-chymotrypsin to which nisin is resistant.     

The Autoproteolysis of Lactococcus lactis Lactocepin III Affects Its Specificity towards β-Casein

The effect of autoproteolysis of Lactococcus lactis lactocepin III on its specificity towards β-casein was investigated. β-Casein degradation was performed by using either an autolysin-defective derivative of L. lactis MG1363 carrying the proteinase genes of L. lactis SK11, which was unable to transport oligopeptides, or autoproteolyzed enzyme purified from L. lactis SK11. Comparison of the peptide pools by high-performance liquid chromatography analysis revealed significant differences. To analyze these differences in more detail, the peptides released by the cell-anchored proteinase were identified by on-line coupling of liquid chromatography to mass spectrometry. More than 100 oligopeptides were released from β-casein by the cell-anchored proteinase. Analysis of the cleavage sites indicated that the specificity of peptide bond cleavage by the cell-anchored proteinase differed significantly from that of the autoproteolyzed enzyme.     

Two-Component Anti-Staphylococcus aureus Lantibiotic Activity Produced by Staphylococcus aureus C55

Staphylococcus aureus C55 was shown to produce bacteriocin activity comprising three distinct peptide components, termed staphylococcins C55α, C55β, and C55γ. The three peptides were purified to homogeneity by a simple four-step purification procedure that consisted of ammonium sulfate precipitation followed by XAD-2 and reversed-phase (C₈ and C₁₈) chromatography. The yield following C₈ chromatography was about 86%, with a more-than-300-fold increase in specific activity. When combined in approximately equimolar amounts, staphylococcins C55α and C55β acted synergistically to kill S. aureus or Micrococcus luteus but not S. epidermidis strains. The N-terminal amino acid sequences of all three peptides were obtained and staphylococcins C55α and C55β were shown to be lanthionine-containing (lantibiotic) molecules with molecular weights of 3,339 and 2,993, respectively. The C55γ peptide did not appear to be a lantibiotic, nor did it augment the inhibitory activities of staphylococcin C55α and/or C55β. Plasmids of 2.5 and 32.0 kb are present in strain C55, and following growth of this strain at elevated temperature (42°C), a large proportion of the progeny failed to produce strong bacteriocin activity and also lost the 32.0-kb plasmid. Protoplast transformation of these bacteria with purified 32-kb plasmid DNA regenerates the ability to produce the strong bacteriocin activity.     

Angiotensin I-Converting-Enzyme-Inhibitory and Antibacterial Peptides from Lactobacillus helveticus PR4 Proteinase-Hydrolyzed Caseins of Milk from Six Species

Sodium caseinates prepared from bovine, sheep, goat, pig, buffalo or human milk were hydrolyzed by a partially purified proteinase of Lactobacillus helveticus PR4. Peptides in each hydrolysate were fractionated by reversed-phase fast-protein liquid chromatography. The fractions which showed the highest angiotensin I-converting-enzyme (ACE)-inhibitory or antibacterial activity were sequenced by mass spectrum and Edman degradation analyses. Various ACE-inhibitory peptides were found in the hydrolysates: the bovine α_S1-casein (α_S1-CN) 24-47 fragment (f24-47), f169-193, and β-CN f58-76; ovine α_S1-CN f1-6 and α_S2-CN f182-185 and f186-188; caprine β-CN f58-65 and α_S2-CN f182-187; buffalo β-CN f58-66; and a mixture of three tripeptides originating from human β-CN. A mixture of peptides with a C-terminal sequence, Pro-Gly-Pro, was found in the most active fraction of the pig sodium caseinate hydrolysate. The highest ACE-inhibitory activity of some peptides corresponded to the concentration of the ACE inhibitor (S)-N-(1-[ethoxycarbonyl]-3-phenylpropyl)-ala-pro maleate (enalapril) of 49.253 μg/ml (100 μmol/liter). Several of the above sequences had features in common with other ACE-inhibitory peptides reported in the literature. The 50% inhibitory concentration (IC₅₀) of some of the crude peptide fractions was very low (16 to 100 μg/ml). Some identified peptides were chemically synthesized, and the ACE-inhibitory activity and IC₅₀s were confirmed. An antibacterial peptide corresponding to β-CN f184-210 was identified in human sodium caseinate hydrolysate. It showed a very large spectrum of inhibition against gram-positive and -negative bacteria, including species of potential clinical interest, such as Enterococcus faecium, Bacillus megaterium, Escherichia coli, Listeria innocua, Salmonella spp., Yersinia enterocolitica, and Staphylococcus aureus. The MIC for E. coli F19 was ca. 50 μg/ml. Once generated, the bioactive peptides were resistant to further degradation by proteinase of L. helveticus PR4 or by trypsin and chymotrypsin.     

Antagonistic Activity of Lactobacillus plantarum C11: Two New Two-Peptide Bacteriocins, Plantaricins EF and JK, and the Induction Factor Plantaricin A

Six bacteriocinlike peptides (plantaricin A [PlnA], PlnE, PlnF, PlnJ, PlnK, and PlnN) produced by Lactobacillus plantarum C11 were detected by amino acid sequencing and mass spectrometry. Since purification to homogeneity was problematic, all six peptides were obtained by solid-phase peptide synthesis and were tested for bacteriocin activity. It was found that L. plantarum C11 produces two two-peptide bacteriocins (PlnEF and PlnJK); a strain-specific antagonistic activity was detected at nanomolar concentrations when PlnE and PlnF were combined and when PlnJ and PlnK were combined. Complementary peptides were at least 10³ times more active when they were combined than when they were present individually, and optimal activity was obtained when the complementary peptides were present in approximately equal amounts. The interaction between complementary peptides was specific, since neither PlnE nor PlnF could complement PlnJ or PlnK, and none of these peptides could complement the peptides constituting the two-peptide bacteriocin lactococcin G. Interestingly, PlnA, which acts as an extracellular signal (pheromone) that triggers bacteriocin production, also possessed a strain-specific antagonistic activity. No bacteriocin activity could be detected for PlnN.     

Gαi2 Signaling Is Required for Skeletal Muscle Growth,Regeneration, and Satellite Cell Proliferation and Differentiation

We have previously shown that activation of Gαi2, an α subunit of the heterotrimeric G protein complex, induces skeletal muscle hypertrophy and myoblast differentiation. To determine whether Gαi2 is required for skeletal muscle growth or regeneration, Gαi2-null mice were analyzed. Gαi2 knockout mice display decreased lean body mass, reduced muscle size, and impaired skeletal muscle regeneration after cardiotoxin-induced injury. Short hairpin RNA (shRNA)-mediated knockdown of Gαi2 in satellite cells (SCs) leads to defective satellite cell proliferation, fusion, and differentiation ex vivo. The impaired differentiation is consistent with the observation that the myogenic regulatory factors MyoD and Myf5 are downregulated upon knockdown of Gαi2. Interestingly, the expression of microRNA 1 (miR-1), miR-27b, and miR-206, three microRNAs that have been shown to regulate SC proliferation and differentiation, is increased by a constitutively active mutant of Gαi2 [Gαi2(Q205L)] and counterregulated by Gαi2 knockdown. As for the mechanism, this study demonstrates that Gαi2(Q205L) regulates satellite cell differentiation into myotubes in a protein kinase C (PKC)- and histone deacetylase (HDAC)-dependent manner.     

Evolution,Expression Differentiation and Interaction Specificity of Heterotrimeric G-Protein Subunit Gene Family in the Mesohexaploid Brassica rapa

Heterotrimeric G-proteins, comprising of Gα, Gβ, and Gγ subunits, are important signal transducers which regulate many aspects of fundamental growth and developmental processes in all eukaryotes. Initial studies in model plants Arabidopsis and rice suggest that the repertoire of plant G-protein is much simpler than that observed in metazoans. In order to assess the consequence of whole genome triplication events within Brassicaceae family, we investigated the multiplicity of G-protein subunit genes in mesohexaploid Brassica rapa, a globally important vegetable and oilseed crop. We identified one Gα (BraA.Gα1), three Gβ (BraA.Gβ1, BraA.Gβ2, and BraA.Gβ3), and five Gγ (BraA.Gγ1, BraA.Gγ2, BraA.Gγ3, BraA.Gγ4, and BraA.Gγ5) genes from B. rapa, with a possibility of 15 Gαβγ heterotrimer combinations. Our analysis suggested that the process of genome triplication coupled with gene-loss (gene-fractionation) phenomenon have shaped the quantitative and sequence diversity of G-protein subunit genes in the extant B. rapa genome. Detailed expression analysis using qRT-PCR assays revealed that the G-protein genes have retained ubiquitous but distinct expression profiles across plant development. The expression of multiple G-protein genes was differentially regulated during seed-maturation and germination stages, and in response to various phytohormone treatments and stress conditions. Yeast-based interaction analysis showed that G-protein subunits interacted in most of the possible combinations, with some degree of subunit-specific interaction specificity, to control the functional selectivity of G-protein heterotrimer in different cell and tissue-types or in response to different environmental conditions. Taken together, this research identifies a highly diverse G-protein signaling network known to date from B. rapa, and provides a clue about the possible complexity of G-protein signaling networks present across globally important Brassica species.     

Function of α subunit of heterotrimeric G protein in brassinosteroid response of rice plants

The α subunit of heterotrimeric G-proteins (Gα) is involved in a broad range of aspects of the brassinosteroid (BR) response, such as the enhancement of lamina bending. However, it has been suggested from epistatic analysis of d1 and d61, which are mutants deficient for Gα and the BR receptor BRI1, that Gα and BRI1 may function via distinct pathways in many cases. In this study, we investigated further the genetic interaction between Gα and BRI1. We report the analysis of transformants of T65d1 and T65d1/d61-7 into which were introduced a constitutively active form of Gα, Q223L. The application of 24-epi-brassinolide (24-epiBL) to T65d1 expressing Q223L still resulted in elongation of the coleoptile and, in fact, it was enhanced over the wild-type plant (WT) level in a concentration dependent manner. In T65d1/d61-7 expressing Q223L, the seed size was enlarged over that of d61-7 due to activation of Gα. These results suggest that Q223L is able to augment the BR response in response to 24-epiBL and also that Q223L functions independently of BRI1 in the process of determining seed morphology, given that Q223L was functional in the BRI1-deficient mutant, d61-7.Key words: brassinosteroid, BRASSINOSTEROID INSENSITIVE1 (BRI1), genetic interaction, G-protein α subunit, rice plants, seed morphology, transgenic plants     

Genetic and Physical Interactions between Gα Subunits and Components of the Gβγ Dimer of Heterotrimeric G Proteins in Neurospora crassa

Heterotrimeric G proteins are critical regulators of growth and asexual and sexual development in the filamentous fungus Neurospora crassa. Three Gα subunits (GNA-1, GNA-2, and GNA-3), one Gβ subunit (GNB-1), and one Gγ subunit (GNG-1) have been functionally characterized, but genetic epistasis relationships between Gβ and Gα subunit genes have not been determined. Physical association between GNB-1 and FLAG-tagged GNG-1 has been previously demonstrated by coimmunoprecipitation, but knowledge of the Gα binding partners for the Gβγ dimer is currently lacking. In this study, the three N. crassa Gα subunits are analyzed for genetic epistasis with gnb-1 and for physical interaction with the Gβγ dimer. We created double mutants lacking one Gα gene and gnb-1 and introduced constitutively active, GTPase-deficient alleles for each Gα gene into the Δgnb-1 background. Genetic analysis revealed that gna-3 is epistatic to gnb-1 with regard to negative control of submerged conidiation. gnb-1 is epistatic to gna-2 and gna-3 for aerial hyphal height, while gnb-1 appears to act upstream of gna-1 and gna-2 during aerial conidiation. None of the activated Gα alleles restored female fertility to Δgnb-1 mutants, and the gna-3^Q208L allele inhibited formation of female reproductive structures, consistent with a need for Gα proteins to cycle through the inactive GDP-bound form for these processes. Coimmunoprecipitation experiments using extracts from the gng-1-FLAG strain demonstrated that the three Gα proteins interact with the Gβγ dimer. The finding that the Gβγ dimer interacts with all three Gα proteins is supported by epistasis between gnb-1 and gna-1, gna-2, and gna-3 for at least one function.     

Molecular insights into replication initiation by Qβ replicase using ribosomal protein S1

Ribosomal protein S1, consisting of six contiguous OB-folds, is the largest ribosomal protein and is essential for translation initiation in Escherichia coli. S1 is also one of the three essential host-derived subunits of Qβ replicase, together with EF-Tu and EF-Ts, for Qβ RNA replication in E. coli. We analyzed the crystal structure of Qβ replicase, consisting of the virus-encoded RNA-dependent RNA polymerase (β-subunit), EF-Tu, EF-Ts and the N-terminal half of S1, which is capable of initiating Qβ RNA replication. Structural and biochemical studies revealed that the two N-terminal OB-folds of S1 anchor S1 onto the β-subunit, and the third OB-fold is mobile and protrudes beyond the surface of the β-subunit. The third OB-fold mainly interacts with a specific RNA fragment derived from the internal region of Qβ RNA, and its RNA-binding ability is required for replication initiation of Qβ RNA. Thus, the third mobile OB-fold of S1, which is spatially anchored near the surface of the β-subunit, primarily recruits the Qβ RNA toward the β-subunit, leading to the specific and efficient replication initiation of Qβ RNA, and S1 functions as a replication initiation factor, beyond its established function in protein synthesis.