Organization and distribution of the cellulosome in Clostridium thermocellum.

The properties of the cellulosome (the cellulose-binding, multicellulase-containing protein complex) in Clostridium thermocellum were examined by comparing the cellulase systems derived from the wild type and an adherence-defective mutant. The growth conditions--specifically, growth either on cellulose (Avicel) or on cellobiose as insoluble or soluble carbon sources, respectively--were found to be critical to the distribution of the cellulosome in the mutant system: the cellobiose-grown mutant (in contrast to the wild type) lacked the cellulosome on its surface and produced only minor quantities of the extracellular cellulosome accompanied by other relatively low-molecular-weight cellulases. The polypeptide composition of the respective purified cellulosome was dependent on the nature of the carbon source and was similar for both wild-type and mutant cells. Ultrastructural analysis revealed the presence of novel polycellulosomal protuberances on the cell surface of the cellobiose-grown wild type which were absent in the mutant.     

Interaction between a type-II dockerin domain and a type-II cohesin domain from Clostridium thermocellum cellulosome

The interaction between the type-II dockerin domain of the scaffoldin protein CipA and the type-II cohesin domain of the outer layer protein SdbA is the fundamental mechanism for anchoring the cellulosome to the cell surface of Clostridium thermocellum. We constructed and purified a dockerin polypeptide and a cohesin polypeptide, and determined affinity constants of the interaction between them by the surface plasmon resonance method. The dissociation constant (K(D)) value was 1.8 x 10(-9) M, which is a little larger than that for the combination of a type-I dockerin and a type-I cohesin.     

A catalogue of Clostridium thermocellum endoglucanase, β-glucosidase and xylanase genes cloned in Escherichia coli

Abstract Two independent collections of clones containing Clostridium thermocellum genes involved in cellulose have been previously obtained at IAPGR, Cambridge, and at the Pasteur Institute, Paris. The two collections were compared for cross-hybridization, restriction maps and enzyme phenotypes. Truly distinct genes were one β-glucosidase gene, two xylanase genes, and fifteen endogluconase genes. Two of the cloned fragments contained extraneous DNA which was absent from their respective counterparts isolated in the other collection. The dicrepancies resulted from in vivo rearrangements which had occurred in either of the C. thermocellum NCIB 10682 stocks used to generate the two gene banks.     

Cellobiose: A true inducer of cellulosome in different strains of Clostridium thermocellum

Abstract Growth and production of cellulosome by three strains (YS, LQRI and NCIB 10682) of Clostridium thermocellum were compared using Avicel (microcrystalline cellulose) and cellobiose as carbon sources. All three strains grew faster on cellobiose than on Avicel and produced 0.71–0.74 IU of endoglucanase/ml compared to 0.88–1.18 IU/ml on Avicel. Also, the cellulase produced by these strains in the presence of 0.2–1% cellobiose and Avicel, when compared on the basis of equal units of endoglucanase (0.5 IU), degraded cotton almost completely. SDS-PAGE further confirmed the production of cellulosome by all three strains when grown on cellobiose and Avicel. Thus, the cellobiose, like Avicel, acts as a true inducer of cellulosome in C. thermocellum .     

Expression of a Clostridium thermocellum xylanase gene in Bacillus subtilis

Summary The native promoter of a xylanase gene isolated from Clostridium thermocellum was replaced with a strong promoter screened from Bacillus subtilis chromosomes. A part of the C-terminal region of the gene which is not related to the xylanase activity was removed. With the modified xylanase gene, B. subtilis was transformed and grown in LB medium. The xylanase gene was expressed well in B. subtilis and extracellular xylanase was produced up to 30 units per ml when the growth reached OD₆₀₀ of 4.8.     

Isolation and properties of a major cellobiohydrolase from the cellulosome of Clostridium thermocellum.

In the anaerobic, thermophilic, cellulolytic bacterium Clostridium thermocellum, efficient solubilization of the insoluble cellulose substrate is accomplished largely through the action of a cellulose-binding multienzyme complex, the cellulosome. A major cellobiohydrolase activity from the cellulosome has been traced to its Mr 75,000 S8 subunit, and an active fragment of this subunit was prepared by a novel procedure involving limited proteolytic cleavage. The truncated Mr 68,000 fragment, termed S8-tr, was purified by gel filtration and high-performance ion-exchange chromatography. The purified protein adsorbed weakly to amorphous cellulose, and its enzymatic action yielded cellobiose as the major end product from both amorphous and crystalline cellulose preparations. The high ratio of exo- to endo-beta-glucanase activities was supported by viscosimetric measurements. The use of model substrates showed that the smallest cellodextrin to be degraded was cellotetraose, but cellopentaose was degraded at a much greater rate. Cellobiose dramatically inhibited the cellulolytic activities. In the absence of calcium or other bivalent metal ions, both the truncated cellobiohydrolase activity of S8-tr and the true cellulase activity of the parent cellulosome were relatively unstable at temperatures above 50 degrees C. Cysteine further enhanced the stabilizing effect of calcium. This is the first report of a defined cellobiohydrolase in C. thermocellum. Its association with the cellulosome and the correspondence of several of their major distinctive properties suggest that this cellobiohydrolase plays a key role in the solubilization of cellulose by the intact cellulosomal complex.     

Sequence of celQ and properties of CelQ, a component of the Clostridium thermocellum cellulosome

The nucleotide sequence of the Clostridium thermocellum F1 celQ gene, which codes for the endoglucanase CelQ, consists of 2,130 bp encoding 710 amino acids. The precursor form of CelQ has a molecular weight of 79,809 and is composed of a signal peptide, a family 9 cellulase domain, a family IIIc carbohydrate-binding module (CBM), and a dockerin domain. Truncated derivatives of CelQ were constructed: CelQdeltadoc consisted of the catalytic domain and the CBM; CelQcat consisted of the catalytic domain only. CelQdeltadoc showed strong activity toward carboxymethylcellulose (CMC) and barley beta-glucan and low activity toward Avicel, acid-swollen cellulose, lichenan, and xylan. The Vmax and Km values were 235 micromol/min/mg and 3.3 mg/ml, respectively, for CMC. By contrast, CelQcat, which was devoid of the CBM, showed negligible activity toward CMC, i.e., about 1/1,000 of the activity of CelQdeltadoc, supporting the previously proposed idea that family IIIc CBMs participate in the catalytic function of the enzyme. Immunological analysis using an antiserum raised against CelQdeltadoc confirmed that CelQ is a component of the C. thermocellum cellulosome.     

Properties and mutation analysis of the CelK cellulose-binding domain from the Clostridium thermocellum cellulosome

The family IV cellulose-binding domain of Clostridium thermocellum CelK (CBD(CelK)) was expressed in Escherichia coli and purified. It binds to acid-swollen cellulose (ASC) and bacterial microcrystalline cellulose (BMCC) with capacities of 16.03 and 3.95 micromol/g of cellulose and relative affinities (K(r)) of 2.33 and 9.87 liters/g, respectively. The CBD(CelK) is the first representative of family IV CBDs to exhibit an affinity for BMCC. The CBD(CelK) also binds to the soluble polysaccharides lichenin, glucomannan, and barley beta-glucan, which are substrates for CelK. It does not bind to xylan, galactomannan, and carboxymethyl cellulose. The CBD(CelK) contains 1 mol of calcium per mol. The CBD(CelK) has three thiol groups and one disulfide, reduction of which results in total loss of cellulose-binding ability. To reveal amino acid residues important for biological function of the domain and to investigate the role of calcium in the CBD(CelK) four highly conserved aromatic residues (Trp(56), Trp(94), Tyr(111), and Tyr(136)) and Asp(192) were mutated into alanines, giving the mutants W56A, W94A, Y111A, Y136A, and D192A. In addition 14 N-terminal amino acids were deleted, giving the CBD-N(CelK). The CBD-N(CelK) and D192A retained binding parameters close to that of the intact CBD(CelK), W56A and W94A totally lost the ability to bind to cellulose, Y136A bound to both ASC and BMCC but with significantly reduced binding capacity and K(r) and Y111A bound weakly to ASC and did not bind to BMCC. Mutations of the aromatic residues in the CBD(CelK) led to structural changes revealed by studying solubility, circular-dichroism spectra, dimer formation, and aggregation. Calcium content was drastically decreased in D192A. The results suggest that Asp192 is in the calcium-binding site of the CBD(CelK) and that calcium does not affect binding to cellulose. The 14 amino acids from the N terminus of the CBD(CelK) are not important for binding. Tyr136, corresponding to Cellulomonas fimi CenC CBD(N1) Y85, located near the binding cleft, might be involved in the formation of the binding surface, while Y111, W56A, and W94A are essential for the binding process by keeping the CBD(CelK) correctly folded.     

Conserved reiterated domains in Clostridium thermocellum endoglucanases are not essential for catalytic activity

The complete nucleotide sequence of the Clostridium thermocellum celE gene, coding for an endo-beta-1,4-glucanase (endoglucanase E; EGE) with xylan-hydrolysing activity has been determined. The structural gene consists of an open reading frame (ORF) of 2442 bp commencing with a GTG start codon and followed by a TAA stop codon. The nucleotide sequence obtained has been confirmed by comparing the predicted amino acid sequence with that derived by N-terminal amino acid sequencing of the purified protein. The EGE sequence contains a region homologous to the reiterated domain found at the C terminus of other endoglucanases from the same organism. BAL 31 deletions of the structural gene have revealed the extent to which this conserved sequence is necessary for endoglucanase and xylanase activity. A region of DNA, upstream from the structural gene has also been sequenced and a ribosome-binding site and putative promoter sequences have been identified. A second ORF which ends 349 bp 5' to the GTG start codon of the celE gene has also been identified. The encoded product contains a C terminus homologous to other C. thermocellum endoglucanases.     

Identification of three distinct Clostridium thermocellum xylanase genes by molecular cloning

Three genes coding for xylanase synthesis in Clostridium thermocellum were cloned and expressed in Escherichia coli. Genomic DNA from Clostridium thermocellum was digested to completion with HindIII, BamHI, and SalI. The fragments were ligated into the corresponding sites of pUC19 and transformed into Escherichia coli. Two of the genes encoded for xylanases which depolymerized xylans but were unable to extensively convert these substrates to reducing sugar. The third gene encoded for an enzyme that extensively hydrolyzed xylan. The insert containing the latter gene was subjected to extensive mapping and was found to encode for a xylanase with a molecular weight of approximately 25,000. The protein product of the cloned gene was obtained in a relatively pure form by heat treatment, ion exchange and gel permeation steps. The enzyme was quite stable to high temperatures with a half-life of 24 h at 70°C.Issued as National Research Council of Canada No. 30545     

In vitro reconstitution of the complete Clostridium thermocellum cellulosome and synergistic activity on crystalline cellulose

Artificial cellulase complexes active on crystalline cellulose were reconstituted in vitro from a native mix of cellulosomal enzymes and CipA scaffoldin. Enzymes containing dockerin modules for binding to the corresponding cohesin modules were prepared from culture supernatants of a C. thermocellum cipA mutant. They were reassociated to cellulosomes via dockerin-cohesin interaction. Recombinantly produced mini-CipA proteins with one to three cohesins either with or without the carbohydrate-binding module (CBM) and the complete CipA protein were used as the cellulosomal backbone. The binding between cohesins and dockerins occurred spontaneously. The hydrolytic activity against soluble and crystalline cellulosic compounds showed that the composition of the complex does not seem to be dependent on which CipA-derived cohesin was used for reconstitution. Binding did not seem to have an obvious local preference (equal binding to Coh1 and Coh6). The synergism on crystalline cellulose increased with an increasing number of cohesins in the scaffoldin. The in vitro-formed complex showed a 12-fold synergism on the crystalline substrate (compared to the uncomplexed components). The activity of reconstituted cellulosomes with full-size CipA reached 80% of that of native cellulosomes. Complexation on the surface of nanoparticles retained the activity of protein complexes and enhanced their stability. Partial supplementation of the native cellulosome components with three selected recombinant cellulases enhanced the activity on crystalline cellulose and reached that of the native cellulosome. This opens possibilities for in vitro complex reconstitution, which is an important step toward the creation of highly efficient engineered cellulases.     

Ultrastructure of the cell surface cellulosome of Clostridium thermocellum and its interaction with cellulose.

The ultrastructural distribution of the cellulosome (a cellulose-binding, multicellulase-containing protein complex) on the cell surface of Clostridium thermocellum YS was examined by cytochemical techniques and immunoelectron microscopy. When cells of the bacterium were grown on cellobiose, cellulosome complexes were compacted into quiescent exocellular protuberant structures. However, when the same cells were grown on cellulose, these polycellulosomal organelles underwent extensive structural transformation; after attachment to the insoluble substrate, the protuberances protracted rapidly to form fibrous "contact corridors." The contact zones mediated physically between the cellulosome (which was intimately attached to the cellulose matrix) and the bacterial cell surface (which was otherwise detached from its substrate). In addition, cell-free cellulosome clusters coated the surface of the cellulose substrate. The cellulose-bound cellulosome clusters appear to be the site of active cellulolysis, the products of which are conveyed subsequently to the cell surface via the exocellular contact zones.     

Primary structure of O-linked carbohydrate chains in the cellulosome of different Clostridium thermocellum strains

The cell-free forms of the multiple cellulase-containing protein complex (cellulosome), isolated from the cellulolytic bacterium Clostridium thermocellum strains YS, ATCC 27405 and LQRI, have a total carbohydrate content of 5-7% (by mass), consisting of O-linked oligosaccharide chains. The carbohydrate chains were liberated by alkaline-borohydride treatment and fractionated as oligosaccharide alditols via gel-permeation chromatography and HPLC. The fractions were investigated by 500-MHz 1H-NMR spectroscopy in combination with monosaccharide and methylation analysis and with fast-atom-bombardment mass spectrometry (FAB-MS). In addition to the previously described major oligosaccharide, (formula; see text) [Gerwig, G. J., de Waard, P., Kamerling, J. P., Vliegenthart, J. F. G., Morgenstern, E., Lamed, R. & Bayer, E. A. (1989) J. Biol. Chem. 264, 1027-1035], the following partial structures of this compound could be established: (formula; see text). Cell-free and cell-associated forms of the cellulosome of C. thermocellum, as determined for strain YS, have the same oligosaccharide pattern. Based on the oligosaccharide structures, a biosynthetic pathway is suggested.     

Exoglucanase activities of the recombinant Clostridium thermocellum CelS, a major cellulosome component.

The recombinant CelS (rCelS), the most abundant catalytic subunit of the Clostridium thermocellum cellulosome, displayed typical exoglucanase characteristics, including (i) a preference for amorphous or crystalline cellulose over carboxymethyl cellulose, (ii) an inability to reduce the viscosity of a carboxymethyl cellulose solution, and (iii) the production of few bound reducing ends on the solid substrate. The hydrolysis products from crystalline cellulose were cellobiose and cellotriose at a ratio of 5:1. The rCelS activity on amorphous cellulose was optimal at 70 degrees C and at pH 5 to 6. Its thermostability was increased by Ca2+. Sulfhydryl reagents had only a mild adverse effect on the rCelS activity. Cellotetraose was the smallest oligosaccharide substrate for rCelS, and the hydrolysis rate increased with the substrate chain length. Many of these properties were consistent with those of the cellulosome, indicating a key role for CelS.     

Identification of the cellulose-binding domain of the cellulosome subunit S1 from Clostridium thermocellum YS

The 3' region of a gene designated cipB, which shows strong homology with cipA that encodes the cellulosome SL subunit of Clostridium thermocellum ATCC 27405, was isolated from a gene library of C. thermocellum strain YS. The truncated S1 protein encoded by the cipB derivative bound tightly to cellulose. The cellulose-binding domain in this polypeptide consisted of a C-terminal proximal 167 residue sequence which showed complete identity with residues 337-503 of mature SL from C. thermocellum strain ATCC 27405. The cellulose-binding domain interacted with both crystalline and amorphous cellulose, but not with xylan.     

Product inhibition of the recombinant CelS,an exoglucanase component of the Clostridium thermocellum cellulosome

CelS is the most abundant subunit and an exoglucanase component of the Clostridium thermocellum cellulosome, multicomponent cellulase complex. The product inhibition pattern of CelS was examined using purified recombinant CelS (rCelS) produced in Escherichia coli. The rCelS activity on cellopentaose was strongly inhibited by cellobiose. The rCelS activity was also inhibited by lactose. Glucose was only marginally inhibitory. Cellobiose appeared to inhibit the rCelS activity through a competitive mechanism. The inhibition was relieved when -glucosidase was added, presumably because of the conversion of cellobiose into glucose. These hydrolysis product inhibition patterns are consistent with those of the crude enzyme (cellulosome), suggesting that CelS is a rate-limiting factor in the activity of the cellulosome.     

Binding of S-layer homology modules from Clostridium thermocellum SdbA to peptidoglycans

S-layer homology (SLH) module polypeptides were derived from Clostridium josui xylanase Xyn10A, Clostridium stercorarium xylanase Xyn10B, and Clostridium thermocellum scafoldin dockerin binding protein SdbA as rXyn10A-SLH, rXyn10B-SLH, and rSdbA-SLH, respectively. Their binding specificities were investigated using various cell wall preparations. rXyn10A-SLH and rXyn10B-SLH bound to native peptidoglycan-containing sacculi consisting of peptidoglycan and secondary cell wall polymers (SCWP) prepared from these bacteria but not to hydrofluoric acid-extracted peptidoglycan-containing sacculi (HF-EPCS) lacking SCWP, suggesting that SCWP are responsible for binding with SLH modules. In contrast, rSdbA-SLH interacted with HF-EPCS, suggesting that this polypeptide had an affinity for peptidoglycans but not for SCWP. The affinity of rSdbA-SLH for peptidoglycans was confirmed by a binding assay using a peptidoglycan fraction prepared from Escherichia coli cells. The SLH modules of SdbA must be useful for cell surface engineering in bacteria that do not contain SCWP.