Influence of psychological factors on the acceptance of complete dentures

Objectives: To assess the influence of psychological factors on the acceptance of complete dentures in a population wearing dentures judged to be clinically satisfactory. Design: Subjects were asked to complete personality profiles and also to rate their dentures using a denture satisfaction questionnaire. Setting: The survey was conducted in the prosthetics clinic of a teaching hospital. Subjects: Patients were selected from those who had new complete dentures constructed in the department within the previous two years. Intervention and main outcome measures : The personality inventory was a self‐administered questionnaire comprising 240 items covering the five domains of personality. Denture satisfaction was scored on a nine item scale with four Likert type responses to each. Results: A group of 16% consistently complained about their dentures. Statistical analysis showed that personality factors especially Neuroticism had a significant relationship with denture satisfaction. Conclusion: Psychological factors significantly influence denture satisfaction and profiles may provide useful in predicting potential difficult denture wearers.     

Experimental studies of adaptation to complete dentures related to ageing

The assessment of a patient's capability to adapt to new dentures is still a challenge in the prosthetic treatment of geriatric patients. The aim of this study was to assess the relationship of age to manual motor ability as well as the mental concentration capacity in comparison to the oral motor ability and the capability to adapt to new dentures. Sixty complete denture wearers volunteered for the experiment. The results indicate, that the manual motor ability and the mental concentration capacity deteriorate with age, whereas the relationship of age to adaptation to new dentures and oral motor ability is less obvious. This may be due o t the patient's denture experience.     

Maximum bite force after the replacement of complete dentures

Objective: The aim of the present study was to investigate whether the maximum bite force ( MBF ) can be improved by the replacement of complete dentures for elderly people. Design: Nine edentulous volunteers, mean age 74.2 (± 5.5) years and average denture experience 19.4 ± 19.5 years (1 to 50 years) had replacement dentures made. After a rehearsal session, MBF was recorded with the old dentures, and with the new dentures immediately at insertion, at 3, 8 days, 2–3 weeks, 1, 2, 3 and 6–10 months post insertion ( p‐i. ). MBF was recorded with the central bearing point method using a full‐bridge strain gauge load cell. Data were analysed off‐line using the mean of two peak readings per patient per session. Results: The results indicate that MBF tended to be impaired when replacement dentures were first fitted (n.s.). However, this trend reversed during the first month p‐i. for patients with a “moderate” lower ridge resorption of Atwood grade 3 or 4 (n = 5). Patients with more severe lower ridge resorption Atwood grade 5 or 6 (n = 4) showed a significantly lower MBF over the entire observation period (p0.05) and took longer to regain bite strength. Only patients with moderate bone resorption exceeded their pre‐insertion level of MBF within the observation period of 6–10 months p‐i. Conclusion: The present pilot study suggests that, at least for elderly patients with severe bone resorption, delayed improvement of MBF should be expected with replacement complete dentures.     

Glass fibre reinforced acrylic resin complete dentures: a 5-year clinical study

doi: 10.1111/j.1741‐2358.2010.00385.x Glass fibre reinforced acrylic resin complete dentures: a 5‐year clinical study Background and objectives: The aim of the study was to establish the wear resistance of the glass fiber reinforced complete dentures comparative to the traditional acrylic complete dentures. Materials and methods: Complete new dentures were made to replace old fractured ‘un’‐reinforced acrylic dentures. The total number of dentures was 30 and woven E‐glass fibre reinforcements were used in maxillary complete dentures. Unidirectional E‐glass fibre reinforcements were used as partial fibre reinforcements in mandibular complete dentures. Ten complete acrylic un‐reinforced dentures were used as control. The follow‐up period was 5 years and the recalls were made at 6 months. Results: After 5 years of wearing the new dentures, the control dentures suffered seven fractures. After 5 years all the mandibular reinforced dentures were in good shape. The maxillary complete reinforced dentures suffered four partial fractures. Fracture lines were restricted by the glass fibre net and the patients could still use their dentures. Conclusion: Pre‐impregnated E‐glass fibre nets and polymer pre‐impregnated E‐glass unidirectional fibres are useful in reinforcing acrylic resin complete dentures especially were heavy occlusal forces are involved. Glass fibre reinforcement will be applied on the tension side in both cases (total fibre reinforcement and partial fibre reinforcement). The reinforcement cannot replace the necessary linings and occlusal adjustments.     

Evaluation of satisfaction with masticatory efficiency of new conventional complete dentures in edentulous patients--a survey

doi: 10.1111/j.1741‐2358.2012.00634.x Evaluation of satisfaction with Masticatory efficiency of new conventional complete dentures in edentulous patients. A survey Background: Knowing how patients really feel after treatment is, very often, as relevant as the success rate of the conventional dentures and it can even be the measurement of masticatory function. Aim and objectives: This questionnaire survey aimed to analyse the satisfaction level and masticatory efficiency of patients treated with conventional complete dentures. Design and setting: Thirty edentulous patients were considered in the study. Satisfaction level and masticatory efficiency were analysed based on specific questionnaires for edentulous patients and by a likert rating scale from 0 to 5, at three moments: Prior to treatment (edentulous period), after the insertion of the new dentures and at 30–45 days follow‐up. Materials and methods: Thirty patients including 12 male and 18 female patients (mean age 65 years), who voluntarily came for the services. T‐test was applied at three different levels. Results: The rehabilitation with conventional complete dentures produced an improvement (p < 0.05) in satisfaction level and masticatory efficiency. Conclusion: Thus, those patients who were edentulous previously and dissatisfied with their masticatory ability showed improvement after receiving a new set of conventional complete dentures.     

Fracture resistance of maxillary complete dentures subjected to long-term water immersion

doi: 10.1111/j.1741‐2358.2012.00616.x Fracture resistance of maxillary complete dentures subjected to long‐term water immersion Objective: This study investigated the fracture resistance of maxillary acrylic resin complete dentures subjected to long‐term water immersion. Materials and Methods: Maxillary acrylic resin complete dentures were fabricated from five denture base resins. Half of the dentures were stored in water for 50 h, and the other half were kept in water for 180 days before testing. Ten specimens were fabricated per group. The flexural load at the proportional limit (FL‐PL) of the dentures was tested. Results: A two‐way anova revealed a significant difference in FL‐PL because of the denture base material variable. There were no significant differences in FL‐PL because of the effect of water immersion and the interaction between the effect of water immersion and the denture base material. The FL‐PLs of the dentures fabricated with the two conventional heat‐processed resins, the pour‐type autopolymerizing resin and the microwave energy‐processed resin were not significantly different from each other; they were significantly higher than the light‐activated resin in regard to their FL‐PL. Conclusion: The FL‐PLs of the maxillary acrylic resin complete dentures did not change after long‐tern water immersion, and the FL‐PL of the denture fabricated from the light‐activated resin was lower than those of the other materials.     

Electromyographic evaluation of masseter and anterior temporalis muscles in rest position of edentulous patients with temporomandibular disorders, before and after using complete dentures with sliding plates

Objectives: This study was performed with the purpose of investigating electromyographic (EMG) activity of the anterior temporalis and masseter muscles in edentulous individuals with temporomandibular disorder (TMD), before and after using sliding plates on complete dentures in the mandibular rest position. Background: Edentulous patients may present TMD, which is characterised by pain in temporomandibular joints, masticatory and neck muscles, uncoordinated and limited mandible movements, joint sounds and an altered occlusal relationship. It is imperative to offer treatment in order to re‐establish stomatognathic system structures before submitting the individual to any definitive restorative treatment. Materials and methods: The patients were edentulous for at least 10 years. EMG recordings were made before the insertion of the dentures (0 months) and also after using the sliding plates at the fourth month, 9th month and 12th month, using computerised electromyography K6‐I/ EMG Light Channel Surface. EMG evaluations of the muscles were performed under the following clinical conditions: rest position with dentures (R1), rest position without dentures (R2), rest position with dentures post‐activity (chewing) (R3), rest position without dentures post‐activity (chewing) (R4). Results: All patients obtained remission of muscular fatigue and reduced pain in stomatognathic system structures. Temporalis muscle showed significant increase in EMG activity compared with initial values (p < 0.01). Masseter muscles showed significantly lower mean values (p < 0.01) compared with initial values. Conclusion: The sliding plates allowed the process of neuromuscular deprogramming, contributing to muscular balance of the masticatory system, and are therefore indicated to be used before the fabrication of definitive complete dentures in patients with TMD.     

Comparative analysis of biofilm levels in complete upper and lower dentures after brushing associated with specific denture paste and neutral soap

Objectives: The objective of this study was to compare and correlate biofilm levels in complete upper and lower prosthesis after brushing, associated with specific paste and soap, by means of computerised methodology. Materials and methods: Forty‐five complete denture wearers were selected and instructed to brush their prostheses (Soft Oral B 40) three times a day for 3 weeks with water (Control), specific paste for complete dentures (Corega Brite) (Experiment 1) and neutral soap (Experiment 2). The study was based on a cross‐over model and a wash‐out period was not included. For biofilm quantification, the internal surfaces were dyed (neutral red 1%), photographed (Canon EOS Digital) and the disclosed biofilm was measured with the Image Tool 2.0 software. The products were assessed by means of a questionnaire regarding their hygiene properties and acceptance. Results: The variance analysis indicated that the lower prostheses exhibited a mean biofilm percentage, significantly higher than the upper prostheses and that brushing with paste (Experiment 1) was more effective than soap (Experiment 2) and, in turn, this was more effective than water (Control). There was a high biofilm correlation (Pearson correlation) between both prostheses. Both products were well accepted by the patients, but the most favoured one was the paste. Conclusions: This was effective in controlling the biofilm and can be used preventatively in the maintenance of oral health by wearers of complete dentures. This is important where the lower prosthesis can harbour microorganisms which may act as a reservoir for other areas of the mouth and thus enhance the importance of proper hygiene.     

Symptoms of craniomandibular disorders in elderly Brazilian wearers of complete dentures

Objective: Investigate the incidence of symptoms of craniomandibular disorder in elderly Brazilian wearers of full dentures. Design: In this cross‐sectional study, a questionnaire based on Helkimo's anamnestic index was applied to a group of 65‐year‐olds or older individuals who wear a set of full dentures. Setting: Interviews were carried out at the dental clinics of the University of Taubaté and the University of Vale do Paraíba, Brazil. Subjects: From a total of 384 patients, 84 elderly wearers of full dentures were interviewed. Main outcome measures: The questionnaire identified the most commonly related symptoms of craniomandibular disorders. Results: The patient's average age was 73.5 years (ranging from 65 to 89 years), 81% of them females. Only 5% reported pain when opening their mouths, and the same percentage complained of temporomandibular joint luxation and a sensation of tired muscles during mastication. Similar rates were found for pain in the temporomandibular joint area (6%), pain in the temporal muscle area (7%), difficulty to move the mandible in the morning (4%) and pain during excursive (protrusive and lateral) movements (8%). The highest rates were found for pain in the masseter muscle area (39%) and articular noises (24%). Conclusion: The incidence of craniomandibular disorder symptoms was low in this group of elderly wearers of full dentures, except for pain in the masseter (39%) and articular noises (24%).     

Validation of communication between elderly denture wearers and dentists: a questionnaire on satisfaction with complete dentures using semi-structured interviews

Objectives: To validate a semi‐structured interview (SSI) for communication between complete denture wearers and dentists. Design: A SSI using a questionnaire with eight questions on satisfaction with complete dentures (CD): covering function, aesthetics and comfort. The first seven questions used a five‐point Likert scale and the last was dichotomous. Two dentists, carefully trained in the use of the structured questionnaire, administered the SSI. Setting: A Greek Department of Prosthetic Dentistry. Subjects: A consecutive sample of 78 CD wearers took part in the study. All subjects presented with complaints from their dentures. Intervention: All participants and their dentures underwent clinical examination. Results: The method showed good reliability, verified by the Cronbach alpha (0.86). Both dentists used the questionnaire produced very similar results. (Wilcoxon test 61–99%). Further, the association of the answers with respect to the five‐point Likert scale was very high; all gamma coefficients were statistically significant except for pain and discomfort from the upper CD (CDU). Conclusions: This method of communication between patients and dentists is reliable and can be used to give good repeatability for qualitatively assessing satisfaction with CD. It can be valuable for clinical use and for extending the study of denture quality to establish outcome measures based on the subjective criteria of satisfaction.     

A study to compare the oral health impact profile and satisfaction before and after having replacement complete dentures in England and Scotland

Objective: To assess the oral health impact profile (OHIP) on edentulous subjects in Scotland and England who needed to have their dentures replaced, and to determine whether any change in the subjects’ assessment of their original and replacement dentures impacted on oral health related quality of life parameters. Background: The loss of all teeth may impact on functional activities. The OHIP is an instrument used to measure subjects’ perception of the social impact of oral disorders on their well being. Methods: A total of 58 edentulous subjects were studied. Subjects completed the OHIP‐14 questionnaires before and after being provided with a set of replacement complete dentures. They also assessed specific features of the upper and lower dentures. Responses were recorded on a Likert scale. Results: For many subjects, the responses in the before treatment questionnaires were at the lower end of the Likert scale, indicating that there were no major impacts on oral health related quality of life parameters. There were significant improvements in four of the 14 OHIP parameters assessed after treatment. With the new dentures, subjects expressed improved satisfaction, particularly for the lower prosthesis. There were no major differences between the responses of the subjects in Scotland and England. Conclusion: For this group of edentulous subjects, although they may need dentures to be replaced after a period of wear, this does not necessarily have significant social impacts. For this reason the provision of new dentures did not result in major changes to the OHIP.     

Effects of home and office care denture reliners on maxillary complete dentures

doi:10.1111/j.1741‐2358.2009.00308.x
Effects of home and office care denture reliners on maxillary complete dentures Objectives: The aim of this study was to evaluate the effects of office (OR) and home (HR) care temporary denture reliners on satisfaction and functional outcomes in maxillary complete denture wearers. Methods: Thirty‐four maxillary edentulous patients received application of either OR or HR to their maxillary complete dentures. Patient’s ratings on satisfaction and functional aspects were measured on a 100‐mm visual analogue scale at 4 days post‐application. Associations between baseline ratings and improvement were also assessed. Results: There were no significant differences between the two groups in satisfaction ratings or in the functional outcomes. The OR group showed a significant improvement in mastication and retention, whereas the HR group exhibited a significant improvement in general satisfaction and mastication. Improvement was negatively associated with baseline ratings of speech, ease of cleaning, stability and retention in the OR groups and across all variables, except ease of cleaning, in the HR group. Conclusion: When used correctly, home care denture therapy can be as effective as office applied temporary liner in improving satisfaction with problematic maxillary dentures.     

A study to compare the oral health impact profile and satisfaction before and after having replacement complete dentures constructed by either the copy or the conventional technique

Aims: To assess the oral health impact profile (OHIP) on edentulous subjects who needed to have their dentures replaced either by a copy technique or a conventional technique, and to determine whether any change in the subjects’ assessment of their original and replacement dentures impacted on oral health related quality of life parameters. Background: The OHIP is an instrument used to measure subjects’ perceptions of the social impact of oral disorders on their well being. Changes in the OHIP may occur when subjects need to have their complete dentures replaced. Furthermore, it is possible that the method by which the dentures are constructed may impact on this. Methods: A total of 65 edentulous subjects were studied. Thirty‐three subjects had their dentures constructed by a copy technique and 32 by a conventional technique. Subjects completed the OHIP‐14 questionnaires before and after being provided with a set of replacement complete dentures. They also assessed specific features of the upper and lower dentures. Responses were recorded on a Likert scale. Results: For many subjects, the responses in the before treatment questionnaires were at the lower end of the Likert scale, indicating that there were no major impacts on oral health related quality of life parameters. There were no major differences between the copy denture subjects and the conventional denture subjects in relation to the change in OHIP scores before and after treatment. Generally subjects expressed improved satisfaction with the new lower denture. However, for the copy denture group there were significant improvements for all seven assessments compared with only five out of seven assessments for subjects in the conventional group. Conclusion: For these groups of edentulous subjects, although they may need dentures to be replaced after a period of wear, this does not necessarily have significant impacts on oral health related quality of life parameters. It seems likely that this is the main reason why the provision of new dentures by either a copying or conventional technique did not result in major changes to the OHIP.     

Assessing expressed need and satisfaction in complete denture wearers

Objectives: The need to assess both lay and professional views of oral health is believed to be at the centre of success when providing dental health care for older patients. Self‐perceived physical (oral) health and perceptions of psychosocial functioning must be included if expressed need is to be assessed. The aim of this work was to construct an expressed need schedule and to assess the ability of this assessment to predict older community‐based patients' satisfaction with complete dentures. Design: Survey of 260 people aged 65 years and over. Setting: Community setting. Main outcome measures: The participants were interviewed using a 55 item modified version of the Oral Health Impact Profile (OHIP) to assess their psychological, social and perceptions of their oral health. All participants were subjected to an oral examination. Results: The results showed that complete denture wearers compared had greater experience of difficulties associated with oral health and psychological functioning. Factor analysis allowed the identification of three dimensions associated with psychological, social and self‐perceived physical (oral) health. When these factors were regressed with normative denture treatment need against satisfaction with complete dentures, satisfaction was characterised by high self‐perceived physical (oral) health, low social health problems and no identifiable normative need. Conclusion: This work supports the inclusion of self‐perceived physical (oral) health and psychosocial health (expressed need) questions in a schedule when predicting satisfaction with complete dentures.     

The effect of variation of the lingual shape of mandibular complete dentures on lingual resistance to lifting forces

Increasing life expectancy, age related reduction in adaptability and progressive severe mandibular resorption all add to the importance of any factor improving the prosthetic success. Objective : To investigate the effect of two different lingual shapes of lower dentures on patients' ability to resist lifting forces. Design : Tongue pressures on the lingual surface of complete mandibular experimental dentures were recorded from mid-line, premolar and molar transducers. Two experimental prostheses were fabricated for each subject: one conventionally contoured, the other formed by piezography. Setting : A clinical research laboratory. Subjects Five experienced complete denture wearers between age 64 and 82 years. Intervention Lifting forces were applied at the midline, left and right premolar sites in random order. Main outcome measures : Peak resistance to lifting forces and lingual pressures used during these tests. Results : Lingual pressures exerted anteriorly were dramatically higher than those on premolar and molar surfaces. Significantly higher pressures were used to resist lifting forces applied to piezographically than conventionally formed contours; correspondingly, significantly higher lifting peak forces were, on average, resisted. Conclusions : Providing a lower denture with a piezographically produced lingual surface was shown, in this preliminary study, to enhance tongue retentive ability over a conventional design. It seems reasonable to maximise retentive potential with oblique sublingual polished surfaces and minimise the adaptive demand, particularly for older patients, by using a piezographic technique which “customises” the contour and precludes over-extension.     

Evaluation of three indices for biofilm accumulation on complete dentures

doi:10.1111/j.1741‐2358.2009.00285.x
Evaluation of three indices for biofilm accumulation on complete dentures Objectives: The objective of this study was to evaluate the accuracy and reproducibility of three complete denture biofilm indices (Prosthesis Hygiene Index; Jeganathan et al. Index; Budtz‐Jørgensen Index) by means of a computerised comparison method. Background: Clinical studies into denture hygiene have employed a large number of biofilm indices among their outcome variables. However, the knowledge about the validity of these indices is still scarce. Materials and methods: Sixty‐two complete denture wearers were selected. The internal surfaces of the upper complete dentures were stained (5% erythrosine) and photographed. The slides were projected on paper, and the biofilm indices were applied over the photos by means of a scoring method. For the computerised method, the areas (total and biofilm‐covered) were measured by dedicated software (Image Tool). In addition, to compare the results of the computerised method and Prosthetic Hygiene Index, a new scoring scale (including four and five graded) was introduced. For the Jeganathan et al. and Budtz‐Jørgensen indices, the original scales were used. Values for each index were compared with the computerised method by the Friedman test. Their reproducibility was measured by means of weighed κ. Significance for both tests was set at 0.05. Results: The indices tested provided similar mean measures but they tended to overestimate biofilm coverage when compared with the computerised method (p < 0.001). Agreement between the Prosthesis Hygiene Index and the computerised method was not significant, regardless of the scale used. Jeghanathan et al. Index showed weak agreement, and consistent results were found for Budtz‐Jorgensen Index (κ = 0.19 and 0.39 respectively). Conclusion: Assessment of accuracy for the biofilm indices showed instrument bias that was similar among the tested methods. Weak inter‐instrument reproducibility was found for the indices, except for the Budtz‐Jørgensen Index. This should be the method of choice for clinical studies when more sophisticated approaches are not possible.     

Understanding the ‘epidemic’ of complete tooth loss among older New Zealanders

doi:10.1111/j.1741‐2358.2009.00306.x
Understanding the ‘epidemic’ of complete tooth loss among older New Zealanders Objective: The aim of this study was to obtain a deeper understanding of the social factors driving New Zealand’s historic ‘epidemic of edentulism’ and how they operated. Method: In‐depth, semi‐structured interviews with 31 older New Zealanders were analysed using applied grounded theory. Results: Universal factors present in the data were: (a) the way in which New Zealand society accepted and indeed encouraged edentulism without stigma for those who had a ‘sub‐optimal’ natural dentition; (b) how the predominant patterns of dental care utilisation (symptomatic and extraction‐based) were often strongly influenced by economic and social disadvantage; and (c) the way in which lay and professional worldviews relating to ‘calcium theory’ and dental caries were fundamental in decisions relating to the transition to edentulism. Major influences were rural isolation, the importance of professional authority and how patient‐initiated transitions to edentulism were ultimately facilitated by an accommodating profession. Conclusion: The combined effects of geography, economics, the dental care system and the professional culture of the day, in the context of contemporary (flawed) understandings of oral disease, appear to have been the key drivers. These were supported (in turn) by a widespread acceptance by the profession and society alike of the extraction/denture philosophy in dealing with oral disease.