Role of helix 3 in pore formation by the Bacillus thuringiensis insecticidal toxin Cry1Aa

Helix 3 of the Cry1Aa toxin from Bacillus thuringiensis possesses eight charged amino acids. These residues, with the exception of those involved in intramolecular salt bridges (E90, R93, E112, and R115), were mutated individually either to a neutral or to an oppositely charged amino acid. The mutated genes were expressed, and the resultant, trypsin-activated toxins were assessed for their toxicity to Manduca sexta larvae and their ability to permeabilize M. sexta larval midgut brush border membrane vesicles to KCl, sucrose, raffinose, potassium gluconate, and N-methyl-D-glucamine hydrochloride with a light-scattering assay based on osmotic swelling. Most mutants were considerably less toxic than Cry1Aa. Replacing either E101, E116, E118, or D120 by cysteine, glutamine, or lysine residues had only minor effects on the properties of the pores formed by the modified toxins. However, half of these mutants (E101C, E101Q, E101K, E116K, E118C, and D120K) had a significantly slower rate of pore formation than Cry1Aa. Mutations at R99 (R99C, R99E, and R99Y) resulted in an almost complete loss of pore-forming ability. These results are consistent with a model in which alpha-helix 3 plays an important role in the mechanism of pore formation without being directly involved in determining the properties of the pores.     

Helix 4 of the Bacillus thuringiensis Cry1Aa toxin lines the lumen of the ion channel.

The mode of action of Bacillus thuringiensis insecticidal proteins is not well understood. Based on analogies with other bacterial toxins and ion channels, we hypothesized that charged amino acids in helix 4 of the Cry1Aa toxin are critical for toxicity and ion channel function. Using Plutella xylostella as a model target, we analyzed responses to Cry1Aa and eight proteins with altered helix 4 residues. Toxicity was abolished in five charged residue mutants (E129K, R131Q, R131D, D136N, D136C), however, two charged (R127E and R127N) and one polar (N138C) residue mutant retained wild-type toxicity. Compared with Cry1Aa and toxic mutants, nontoxic mutants did not show greatly reduced binding to brush border membrane vesicles, but their ion channel conductance was greatly reduced in planar lipid bilayers. Substituted cysteine accessibility tests showed that in situ restoration of the negative charge of D136C restored conductance to wild-type levels. The results imply that charged amino acids on the Asp-136 side of helix 4 are essential for toxicity and passage of ions through the channel. These results also support a refined version of the umbrella model of membrane integration in which the side of helix 4 containing Asp-136 faces the aqueous lumen of the ion channel.     

Helix α4 of the Bacillus thuringiensis Cry1Aa Toxin Plays a Critical Role in the Postbinding Steps of Pore Formation

Helix α4 of Bacillus thuringiensis Cry toxins is thought to play a critical role in the toxins' mode of action. Accordingly, single-site substitutions of many Cry1Aa helix α4 amino acid residues have previously been shown to cause substantial reductions in the protein's pore-forming activity. Changes in protein structure and formation of intermolecular disulfide bonds were investigated as possible factors responsible for the inactivity of these mutants. Incubation of each mutant with trypsin and chymotrypsin for 12 h did not reveal overt structural differences with Cry1Aa, although circular dichroism was slightly decreased in the 190- to 210-nm region for the I132C, S139C, and V150C mutants. The addition of dithiothreitol stimulated pore formation by the E128C, I132C, S139C, T142C, I145C, P146C, and V150C mutants. However, in the presence of these mutants, the membrane permeability never reached that measured for Cry1Aa, indicating that the formation of disulfide bridges could only partially explain their loss of activity. The ability of a number of inactive mutants to compete with wild-type Cry1Aa for pore formation in brush border membrane vesicles isolated from Manduca sexta was also investigated with an osmotic swelling assay. With the exception of the L147C mutant, all mutants tested could inhibit the formation of pores by Cry1Aa, indicating that they retained receptor binding ability. These results strongly suggest that helix α4 is involved mainly in the postbinding steps of pore formation.     

Cysteine scanning mutagenesis of alpha4, a putative pore-lining helix of the Bacillus thuringiensis insecticidal toxin Cry1Aa

Helix alpha4 of Bacillus thuringiensis Cry toxins is thought to line the lumen of the pores they form in the midgut epithelial cells of susceptible insect larvae. To define its functional role in pore formation, most of the alpha4 amino acid residues were replaced individually by a cysteine in the Cry1Aa toxin. The toxicities and pore-forming abilities of the mutated toxins were examined, respectively, by bioassays using neonate Manduca sexta larvae and by a light-scattering assay using midgut brush border membrane vesicles isolated from M. sexta. A majority of these mutants had considerably reduced toxicities and pore-forming abilities. Most mutations causing substantial or complete loss of activity map on the hydrophilic face of the helix, while most of those having little or only relatively minor effects map on its hydrophobic face. The properties of the pores formed by mutants that retain significant activity appear similar to those of the pores formed by the wild-type toxin, suggesting that mutations resulting in a loss of activity interfere mainly with pore formation.     

Structural and functional studies of alpha-helix 5 region from Bacillus thuringiensis Cry1Ab delta-endotoxin

The crystal insecticidal proteins from Bacillus thuringiensis are modular proteins comprised of three domains connected by single linkers. Domain I is a seven alpha-helix bundle, which has been involved in membrane insertion and pore formation activity. Site-directed mutagenesis has contributed to identify regions that might play an important role in the structure of the pore-forming domain within the membrane. There are several evidences that support that the hairpin alpha4-alpha5 inserts into the membrane in an antiparallel manner, while other helices lie on the membrane surface. We hypothesized that highly conserved residues of alpha5 could play an important role in toxin insertion, oligomerization and/or pore formation. A total of 15 Cry1Ab mutants located in six conserved residues of Cry1Ab, Y153, Y161, H168, R173, W182 and G183, were isolated. Eleven mutants were located within helix alpha5, one mutant was located in the loop alpha4-alpha5 and three mutants, W182P, W182I and G183C, were located in the loop alpha5-alpha6. Their effect on binding, K(+) permeability and toxicity against Manduca sexta larvae was analyzed and compared. The results provide direct evidence that some residues located within alpha5 have an important role in stability of the toxin within the insect gut, while some others also have an important role in pore formation. The results also provide evidence that conserved residues within helix alpha5 are not involved in oligomer formation since mutations in these residues are able to make pores in vitro.     

The alpha-helix 4 residue, Asn135, is involved in the oligomerization of Cry1Ac1 and Cry1Ab5 Bacillus thuringiensis toxins.

The insecticidal Cry toxins produced by the bacterium Bacillus thuringiensis are comprised of three structural domains. Domain I, a seven-helix bundle, is thought to penetrate the insect epithelial cell plasma membrane through a hairpin composed of alpha-helices 4 and 5, followed by the oligomerization of four hairpin monomers. The alpha-helix 4 has been proposed to line the lumen of the pore, whereas some residues in alpha-helix 5 have been shown to be responsible for oligomerization. Mutation of the Cry1Ac1 alpha-helix 4 amino acid Asn135 to Gln resulted in the loss of toxicity to Manduca sexta, yet binding was still observed. In this study, the equivalent mutation was made in the Cry1Ab5 toxin, and the properties of both wild-type and mutant toxin counterparts were analyzed. Both mutants appeared to bind to M. sexta membrane vesicles, but they were not able to form pores. The ability of both N135Q mutants to oligomerize was also disrupted, providing the first evidence that a residue in alpha-helix 4 can contribute to toxin oligomerization.     

Charge distribution and imperfect amphipathicity affect pore formation by antimicrobial peptides

Antimicrobial peptides often permeabilize biological membranes via a pore mechanism. Two pore types have been proposed: toroidal, where the pore is partly lined by lipid, and barrel-stave, where a cylindrical pore is completely lined by peptides. What drives the preference of antimicrobial peptides for a certain pore type is not yet fully understood. According to neutron scattering and oriented circular dichroism, melittin and MG-H2 induce toroidal pores whereas alamethicin forms barrel-stave pores. In previous work we found that indeed melittin seems to favor toroidal pores whereas alamethicin favors cylindrical pores. Here we designed mutants of these two peptides and the magainin analog MG-H2, aimed to probe how the distribution of charges along the helix and its imperfectly amphipathic structure influence pore formation. Molecular dynamics (MD) simulations of the peptides in a pre-formed cylindrical pore have been performed. The duration of the simulations was 136ns to 216ns. We found that a melittin mutant with lysine 7 neutralized favors cylindrical pores whereas a MG-H2 mutant with lysines in the N-terminal half of these peptides neutralized and an alamethicin mutant with a positive charge at the position 7 form semitoroidal pores. These results suggest that charged residues within the N-terminal half are important for toroidal pore formation. Toroidal pores produced by MG-H2 are more disordered than the melittin pores, likely because of the charged residues located in the middle of the MG-H2 helix (K11 and K14). Imperfect amphipathicity of melittin seems to play a role in its preference for toroidal pores since the substitutions of charged residues located within the nonpolar face by hydrophobic residues suppress evolution of a toroidal pore. The mutations change the position of lysine 7 near the N-terminus, relative to the lower leaflet headgroups. The MD simulations also show that the melittin P14A mutant forms a toroidal pore, but its configuration diverges from that of melittin and it is probably metastable.     

Role of interdomain salt bridges in the pore-forming ability of the Bacillus thuringiensis toxins Cry1Aa and Cry1Ac

The four salt bridges (Asp(222)-Arg(281), Arg(233)-Glu(288), Arg(234)-Glu(274), and Asp(242)-Arg(265)) linking domains I and II in Cry1Aa were abolished individually in alpha-helix 7 mutants D222A, R233A, R234A, and D242A. Two additional mutants targeting the fourth salt bridge (R265A) and the double mutant (D242A/R265A) were rapidly degraded during trypsin activation. Mutations were also introduced in the corresponding Cry1Ac salt bridge (D242E, D242K, D242N, and D242P), but only D242N and D242P could be produced. All toxins tested, except D242A, were shown by light-scattering experiments to permeabilize Manduca sexta larval midgut brush border membrane vesicles. The three active Cry1Aa mutants at pH 10.5, as well as D222A at pH 7.5, demonstrated a faster rate of pore formation than Cry1Aa, suggesting that increases in molecular flexibility due to the removal of a salt bridge facilitated toxin insertion into the membrane. However, all mutants were considerably less toxic to M. sexta larvae than to the respective parental toxins, suggesting that increased flexibility made the toxins more susceptible to proteolysis in the insect midgut. Interdomain salt bridges, especially the Asp(242)-Arg(265) bridge, therefore contribute greatly to the stability of the protein in the larval midgut, whereas their role in intrinsic pore-forming ability is relatively less important.     

Bacillus thuringiensis ssp. israelensis Cyt1Aa enhances activity of Cry11Aa toxin by facilitating the formation of a pre-pore oligomeric structure

Bacillus thuringiensis ssp. israelensis (Bti) has been used worldwide for the control of dipteran insect pests. This bacterium produces several Cry and Cyt toxins that individually show activity against mosquitoes but together show synergistic effect. Previous work demonstrated that Cyt1Aa synergizes the toxic activity of Cry11Aa by functioning as a membrane-bound receptor. In the case of Cry toxins active against lepidopteran insects, receptor interaction triggers the formation of a pre-pore oligomer that is responsible for pore formation and toxicity. In this work we report that binding of Cry11Aa to Cyt1Aa facilitates the formation of a Cry11Aa pre-pore oligomeric structure that is capable of forming pores in membrane vesicles. Cry11Aa and Cyt1A point mutants affected in binding and in synergism had a correlative effect on the formation of Cry11Aa pre-pore oligomer and on pore-formation activity of Cry11Aa. These data further support that Cyt1Aa interacts with Cry11Aa and demonstrate the molecular mechanism by which Cyt1Aa synergizes or suppresses resistance to Cry11Aa, by providing a binding site for Cry11Aa that will result in an efficient formation of Cry11Aa pre-pore that inserts into membranes and forms ionic pores.     

Amino acid and divalent ion permeability of the pores formed by the Bacillus thuringiensis toxins Cry1Aa and Cry1Ac in insect midgut brush border membrane vesicles

The pores formed by Bacillus thuringiensis insecticidal toxins have been shown to allow the diffusion of a variety of monovalent cations and anions and neutral solutes. To further characterize their ion selectivity, membrane permeability induced by Cry1Aa and Cry1Ac to amino acids (Asp, Glu, Ser, Leu, His, Lys and Arg) and to divalent cations (Mg(2+), Ca(2+) and Ba(2+)) and anions (SO(4)(2-) and phosphate) was analyzed at pH 7.5 and 10.5 with midgut brush border membrane vesicles isolated from Manduca sexta and an osmotic swelling assay. Shifting pH from 7.5 to 10.5 increases the proportion of the more negatively charged species of amino acids and phosphate ions. All amino acids diffused well across the toxin-induced pores, but, except for aspartate and glutamate, amino acid permeability was lower at the higher pH. In the presence of either toxin, membrane permeability was higher for the chloride salts of divalent cations than for the potassium salts of divalent anions. These results clearly indicate that the pores are cation-selective.     

Structure-function relationships in a winter flounder antifreeze polypeptide. I. Stabilization of an alpha-helical antifreeze polypeptide by charged-group and hydrophobic interactions

The major antifreeze polypeptide (AFP) from winter flounder (37 amino acid residues) is a single alpha-helix. Aspartic acid and arginine are found, respectively, at the amino and carboxyl-termini. These charged amino acids are ideally located for stabilizing the alpha-helical conformation of this AFP by means of charge-dipole interaction (Shoemaker, K. R., Kim, P.S., York, E.J., Stewart, J. M., and Baldwin, R. L. (1987) Nature 326, 563-567). In order to understand these and other molecular interactions that maintain the AFP structure, we have carried out the chemical synthesis of AFP analogs and evaluated their conformations by circular dichroism spectroscopy. We synthesized the entire AFP molecule (37-mer) and six COOH-terminal peptide fragments (36-, 33-, 27-, 26-, 16-, and 15-mers). Peptides containing acidic NH2-terminal residues displayed greater helix formation and thermal stability compared to those peptides of similar size, but with neutral NH2-terminal residues. Helix formation was maximum above pH 9.2. The peptide conformations also displayed a pH-dependent sensitivity to changes in ionic strength. Helix formation was reduced in the presence of acetonitrile. We conclude that the AFP helix is most likely stabilized by: charge-dipole interactions between charged terminal amino acids and the helix dipole, a charge interaction between Lys18 and Glu22 (either a salt bridge or a hydrogen bond), and hydrophobic interactions.     

Effects of Mutations Within Surface-Exposed Loops in the Pore-Forming Domain of the Cry9Ca Insecticidal Toxin of Bacillus thuringiensis

The pore-forming domain of Bacillus thuringiensis insecticidal Cry toxins is formed of seven amphipathic α-helices. Because pore formation is thought to involve conformational changes within this domain, the possible role of its interhelical loops in this crucial step was investigated with Cry9Ca double mutants, which all share the previously characterized R164A mutation, using a combination of homology modeling, bioassays and electrophysiological measurements. The mutations either introduced, neutralized or reversed an electrical charge carried by a single residue of one of the domain I loops. The ability of the 28 Cry9Ca double mutants to depolarize the apical membrane of freshly isolated Manduca sexta larval midguts was tested in the presence of either midgut juice or a cocktail of protease inhibitors because these conditions had been shown earlier to greatly enhance pore formation by Cry9Ca and its R164A single-site mutant. Most mutants retained toxicity toward neonate larvae and a pore-forming ability in the electrophysiological assay, which were comparable to those of their parental toxin. In contrast, mutants F130D, L186D and V189D were very poorly toxic and practically inactive in vitro. On the other hand, mutant E129A depolarized the midgut membrane efficiently despite a considerably reduced toxicity, and mutant Q192E displayed a reduced depolarizing ability while conserving a near wild-type toxicity. These results suggest that the conditions found in the insect midgut, including high ionic strength, contribute to minimizing the influence of surface charges on the ability of Cry9Ca and probably other B. thuringiensis toxins to form pores within their target membrane.     

Positive charges at the intracellular mouth of the pore regulate anion conduction in the CFTR chloride channel

Many different ion channel pores are thought to have charged amino acid residues clustered around their entrances. The so-called surface charges contributed by these residues can play important roles in attracting oppositely charged ions from the bulk solution on one side of the membrane, increasing effective local counterion concentration and favoring rapid ion movement through the channel. Here we use site-directed mutagenesis to identify arginine residues contributing important surface charges in the intracellular mouth of the cystic fibrosis transmembrane conductance regulator (CFTR) Cl(-) channel pore. While wild-type CFTR was associated with a linear current-voltage relationship with symmetrical solutions, strong outward rectification was observed after mutagenesis of two arginine residues (R303 and R352) located near the intracellular ends of the fifth and sixth transmembrane regions. Current rectification was dependent on the charge present at these positions, consistent with an electrostatic effect. Furthermore, mutagenesis-induced rectification was more pronounced at lower Cl(-) concentrations, suggesting that these mutants had a reduced ability to concentrate Cl(-) ions near the inner pore mouth. R303 and R352 mutants exhibited reduced single channel conductance, especially at negative membrane potentials, that was dependent on the charge of the amino acid residue present at these positions. However, the very low conductance of both R303E and R352E-CFTR could be greatly increased by elevating intracellular Cl(-) concentration. Modification of an introduced cysteine residue at position 303 by charged methanethiosulfonate reagents reproduced charge-dependent effects on current rectification. Mutagenesis of arginine residues in the second and tenth transmembrane regions also altered channel permeation properties, however these effects were not consistent with changes in channel surface charges. These results suggest that positively charged arginine residues act to concentrate Cl(-) ions at the inner mouth of the CFTR pore, and that this contributes to maximization of the rate of Cl(-) ion permeation through the pore.     

Role of alpha-helix seven of Bacillus thuringiensis Cry1Ab delta-endotoxin in membrane insertion, structural stability, and ion channel activity

Domain I of the Cry1Ab insecticidal toxic protein has seven alpha-helices and is considered to be involved in the ion channel activity. While other alpha-helices, particularly alpha-4 and alpha-5, have been extensively explored, the remaining alpha-helices have been slightly studied. Site-directed mutagenesis was used to generate mutations throughout sequences encoding the alpha-helix 7 to test its role in ion channel function. Every amino acid residue in alpha-helix 7 was mutated to alanine. Most resultant proteins, e.g., D225A, W226A, Y229A, N230A, R233A, R234A, D242A, and F247A yielded no protoxin or were sensitive to degradation by trypsin or Manduca sexta midgut juice. Other mutant proteins, R224A, R228A, and E235A, were resistant to degradation to the above proteases but were 8, 30, and 12 times less toxic to M. sexta, respectively, than the wild-type Cry1Ab. Circular dichroism spectroscopy indicated a very small change in the R228A spectrum, while R224A and E235A display the same spectrum as the wild-type protein. These three mutant proteins showed little differences from Cry1Ab when analyzed by saturation binding and competition binding kinetics with (125)I-labeled toxin or by surface plasmon resonance to M. sexta brush border membrane vesicles. More conservative amino acid substitutions were introduced into alpha-helix 7 residues: R228K, F232Y, E235Q, and F247Y. In comparison with wild-type Cry1Ab, mutant proteins R228K, F232Y, E235A, and E235Q selectively discriminate between K+ and Rb+, while R224A and R228A had reduced inhibition of short-circuit current for both ions, when analyzed by voltage clamping of M. sexta midguts.     

His180 in the pore-lining α4 of the Bacillus thuringiensis Cry4Aa δ-endotoxin is crucial for structural arrangements of the α4-α5 transmembrane hairpin and hence biotoxicity

One proposed toxic mechanism of Bacillus thuringiensis Cry δ-endotoxins involves pore formation in target membranes by the α4-α5 transmembrane hairpin constituting their pore-forming domain. Here, nine selected charged and uncharged polar residues in the pore-lining α4 of the Cry4Aa mosquito-active toxin were substituted with Ala. All mutant toxins, i.e., D169A, R171A, Q173A, H178A, Y179A, H180A, Q182A, N183A and E187A, were over-expressed in Escherichia coli as 130-kDa protoxin inclusions at levels comparable to the wild-type toxin. Bioassays against Aedes aegypti larvae revealed that only H178A and H180A mutants displayed a drastic reduction in biotoxicity, albeit almost complete insolubility observed for H178A, but not for H180A inclusions. Further mutagenic analysis showed that replacements of His¹⁸⁰ with charged (Arg, Lys, Asp, Glu), small uncharged polar (Ser, Cys) or small non-polar (Gly, Val) residues severely impaired the biotoxicity, unlike substitutions with relatively large uncharged (Asn, Gln, Leu) or aromatic (Phe, Tyr, Trp) residues. Similar to the trypsin-activated wild-type toxin, both bio-active and -inactive H180 mutants were still capable of releasing entrapped calcein from lipid vesicles and producing cation-selective channels with ~130-pS maximum conductance. Analysis of the Cry4Aa structure revealed the existence of a hydrophobic cavity near the critical His¹⁸⁰ side-chain. Analysis of simulated structures revealed that His¹⁸⁰-to-smaller residue conversions create a gap disrupting such cavity's hydrophobicity and hence structural arrangements of the α4-α5 hairpin. Altogether, our data disclose a critical involvement in Cry4Aa-biotoxicity of His¹⁸⁰ exclusively present in the lumen-facing α4 for providing proper environment for the α4-α5 hairpin prior to membrane-inserted pore formation.     

Homology modeling of Cry10Aa toxin from B. thuringiensis israelensis and B. thuringiensis subsp. LDC-9

A three dimensional model was developed for Cry10Aa protein sequence of B. thuringiensis LDC-9 and B. thuringiensis israelensis that has not been solved empirically by X-ray crystallography or NMR. Homology modeling was employed for the structure prediction using Cry2Aa as template protein, a high-resolution X-ray crystallography structure. The model predicted for the B. thuringiensis LDC-9 Cry10Aa protein reveals a partial N-terminal domain only due to its partial sequence of 104 amino acids. B. thuringiensis israelensis Cry10Aa model contains three domains such as domain I, a bundle of eight alpha helices with the central relatively hydrophobic helix surrounded by amphipathic helices while domain II and III contain mostly beta-sheets. Significant structural differences within domain II in this model among all Cry protein structures indicates that it is involved in recognition and binding to cell surfaces. Comparison of B. thuringiensis israelensis predicted structure with available experimentally determined Cry structures reveals identical folds. The distribution of electrostatic potential on the surface of the molecules in the model is non-uniform and identifies one side of the alpha-helical domain as negatively charged indicating orientation of toxic molecules toward the cell membrane during the initial binding with a cell surface receptor. The collective knowledge of Cry toxin structures will lead to a more critical understanding of the structural basis for receptor binding and pore formation, as well as allowing the scope of diversity to be better appreciated. This model will serve as a starting point for the design of mutagenesis experiments aimed to improve the toxicity and to provide a new tool for the elucidation of the mechanism of action of these mosquitocidal proteins.     

Interactions between charged amino acid residues within transmembrane helices in the sulfate transporter SHST1

The aim of this study was to identify charged amino acid residues important for activity of the sulfate transporter SHST1. We mutated 10 charged amino acids in or near proposed transmembrane helices and expressed the resulting mutants in a sulfate transport-deficient yeast strain. Mutations affecting four residues resulted in a complete loss of sulfate transport; these residues were D107 and D122 in helix 1 and R354 and E366 in helix 8. All other mutants showed some reduction in transport activity. The E366Q mutant was unusual in that expression of the mutant protein was toxic to yeast cells. The R354Q mutant showed reduced trafficking to the plasma membrane, indicating that the protein was misfolded. However, transporter function (to a low level) and wild-type trafficking could be recovered by combining the R354Q mutation with either the E175Q or E270Q mutations. This suggested that R354 interacts with both E175 and E270. The triple mutant E175Q/E270Q/R354Q retained only marginal sulfate transport activity but was trafficked at wild-type levels, suggesting that a charge network between these three residues may be involved in the transport pathway, rather than in folding. D107 was also found to be essential for the ion transport pathway and may form a charge pair with R154, both of which are highly conserved. The information obtained on interactions between charged residues provides the first evidence for the possible spatial arrangement of transmembrane helices within any member of this transporter family. This information is used to develop a model for SHST1 tertiary structure.     

Amino acid and divalent ion permeability of the pores formed by the Bacillus thuringiensis toxins Cry1Aa and Cry1Ac in insect midgut brush border membrane vesicles

The pores formed by Bacillus thuringiensis insecticidal toxins have been shown to allow the diffusion of a variety of monovalent cations and anions and neutral solutes. To further characterize their ion selectivity, membrane permeability induced by Cry1Aa and Cry1Ac to amino acids (Asp, Glu, Ser, Leu, His, Lys and Arg) and to divalent cations (Mg²⁺, Ca²⁺ and Ba²⁺) and anions (SO₄²⁻ and phosphate) was analyzed at pH 7.5 and 10.5 with midgut brush border membrane vesicles isolated from Manduca sexta and an osmotic swelling assay. Shifting pH from 7.5 to 10.5 increases the proportion of the more negatively charged species of amino acids and phosphate ions. All amino acids diffused well across the toxin-induced pores, but, except for aspartate and glutamate, amino acid permeability was lower at the higher pH. In the presence of either toxin, membrane permeability was higher for the chloride salts of divalent cations than for the potassium salts of divalent anions. These results clearly indicate that the pores are cation-selective.     

Binding of Cyt1Aa and Cry11Aa toxins of Bacillus thuringiensis serovar israelensis to brush border membrane vesicles of Tipula paludosa (Diptera: Nematocera) and subsequent pore formation

Bacillus thuringiensis serovar israelensis (B. thuringiensis subsp. israelensis) produces four insecticidal crystal proteins (ICPs) (Cry4A, Cry4B, Cry11A, and Cyt1A). Toxicity of recombinant B. thuringiensis subsp. israelensis strains expressing only one of the toxins was determined with first instars of Tipula paludosa (Diptera: Nematocera). Cyt1A was the most toxic protein, whereas Cry4A, Cry4B, and Cry11A were virtually nontoxic. Synergistic effects were recorded when Cry4A and/or Cry4B was combined with Cyt1A but not with Cry11A. The binding and pore formation are key steps in the mode of action of B. thuringiensis subsp. israelensis ICPs. Binding and pore-forming activity of Cry11Aa, which is the most toxic protein against mosquitoes, and Cyt1Aa to brush border membrane vesicles (BBMVs) of T. paludosa were analyzed. Solubilization of Cry11Aa resulted in two fragments, with apparent molecular masses of 32 and 36 kDa. No binding of the 36-kDa fragment to T. paludosa BBMVs was detected, whereas the 32-kDa fragment bound to T. paludosa BBMVs. Only a partial reduction of binding of this fragment was observed in competition experiments, indicating a low specificity of the binding. In contrast to results for mosquitoes, the Cyt1Aa protein bound specifically to the BBMVs of T. paludosa, suggesting an insecticidal mechanism based on a receptor-mediated action, as described for Cry proteins. Cry11Aa and Cyt1Aa toxins were both able to produce pores in T. paludosa BBMVs. Protease treatment with trypsin and proteinase K, previously reported to activate Cry11Aa and Cyt1Aa toxins, respectively, had the opposite effect. A higher efficiency in pore formation was observed when Cyt1A was proteinase K treated, while the activity of trypsin-treated Cry11Aa was reduced. Results on binding and pore formation are consistent with results on ICP toxicity and synergistic effect with Cyt1Aa in T. paludosa.     

Reconstitution of holin activity with a synthetic peptide containing the 1-32 sequence region of EJh,the EJ-1 phage holin

Pneumococcal EJ-1 phage holin (EJh) is a hydrophobic polypeptide of 85 amino acid residues displaying lethal inner membrane disruption activity. To get an insight into holin structure and function, several peptides representing the different topological regions predicted by sequence analysis have been synthesized. Peptides were structurally characterized in both aqueous buffer and membrane environments, and their potential to induce membrane perturbation was determined. Among them, only the N-terminal predicted transmembrane helix increased the membrane permeability. This segment, only when flanked by the positive charged residues on its N-terminal side, which are present in the sequence of the full-length protein, folds into a major alpha-helix structure with a transmembrane preferential orientation. Fluorescein quenching experiments of N-terminal-labeled peptide evidenced the formation of oligomers of variable size depending on the peptideto-lipid molar ratio. The self-assembling tendency correlated with the formation of transmembrane pores that permit the release of encapsulated dextrans of various sizes. When analyzed by atomic force microscopy, peptide-induced membrane lesions are visualized as transbilayer holes. These findings are the first evidence for a lytic domain in holins and for the nature of membrane lesions caused by them.