Optimization of the separation lactic acid enantiomers in body fluids by capillary electrophoresis

The optimization of the separation conditions of the two optical isomers of lactic acid by a factorial design is reported. Initially, different chiral selectors were systematically investigated and then a experimental design with three quantitative factors (cyclodextrin concentration and background buffer pH and concentration) were evaluated. Optimal conditions for obtaining a resolution higher than 1.5 were: phosphate buffer 200 mM at pH=6.0 with 413 mM 2-hydroxypropyl-beta-cyclodextrin added (HP-beta-CD), 20 degrees C, -20 kV of applied potential and polyacrylamide-coated capillary. The method was validated for the measurement in plasma and it was applied to the identification of both isomers in body fluids such as urine, amniotic fluid and cerebrospinal fluid. Samples were centrifuged and diluted (1:4) prior to the analysis.     

Partial purification of human parathyroid hormone 1-84 as a thioredoxin fusion form in recombinant Escherichia coli by thermoosmotic shock

A modified purification method, thermoosmotic shock (osmotic shock coupled with heat-treatment) for heat-stable proteins, was devised in the purification of Trx-hPTH (1-84) (human parathyroid hormone coupled with thioredoxin as a fusion partner) from E. coli. Thermoosmotic shock can integrate the functions of extraction and crude separation of fusion protein Trx-hPTH (1-84). To improve the purification efficiency, thermoosmotic shock conditions were optimized and achieved as follows: the optimized high osmotic solution containing 20mM Tris-HCl buffer (pH 8.0), 1mM EDTA, and 25% sucrose; the low osmotic solution containing 20mM Tris-HCl buffer (pH 8.0), 1mM EDTA, and the heat-treatment temperature of 100 degrees C for 10 min. Using this method, the purity of Trx-hPTH (1-84) was up to 73% and the yield was up to 72%, respectively. In addition, the two separation methods of both thermoosmotic shock and affinity chromatography have been compared, indicating that thermoosmotic shock is an economical and feasible way for the fusion protein separation. Besides, the thermoosmotic shock method may be used for the purification of some proteins of thermal stability without N-terminal His-tag.     

Improved electrophoretic separation of supercoiled and relaxed DNA in the presence of ethidium bromide.

Supercoiled and relaxed DNA were resolved electrophoretically in the presence of 0.5 micrograms/ml ethidium bromide. Under these conditions the Gaussian distributions of topological isomers of both supercoiled and relaxed DNA migrated as discrete bands. The separation of these DNAs was optimized by varying the concentration of electrode buffer. Electrophoresis in the presence of 160 mM Tris-acetate, pH 8.3, 4 mM EDTA resulted in a 20-fold increase in the separation of relaxed and supercoiled DNA relative to electrophoresis in 40 mM Tris-acetate, pH 8.3, 1 mM EDTA.     

Detection of d-Serine in rat brain by capillary electrophoresis with laser induced fluorescence detection

A capillary zone electrophoresis method with laser induced fluorescence detection for the chiral separation of highly fluorescent enantiomeric derivatives of d/l-Serine from 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-d/l-Serine) was developed and optimized. Enantiomeric separation of NBD-d/l-Serine was accomplished by using 40 mM hydroxypropyl-beta-cyclodextrin (HP-beta-CD) contained in 100 mM borate buffer, pH 10.0. A 70 cm (effective length of 50 cm) uncoated fused-silica capillary at a voltage of 15 kV was used for the separation. The optimized electrophoretic conditions were subsequently applied to the analysis of d-Serine in rat brain, and satisfactory analytical results with respect to accuracy were obtained. This assay showed acceptable precision, with linearity in the d-Serine concentration range of 0.2-20.0 microM. The limit of detection for d-Serine was 3.0 x 10(-7)M.     

Determination of opiates in urine by capillary electrophoresis

A method for the separation of a mixture of opiates comprising pholcodine, 6-monoacetylmorphine, morphine, heroin, codeine and dihydrocodeine by capillary electrophoresis using a running buffer of 100 mM disodium hydrogenphosphate at pH 6 is described. The characteristics of an analytical method based on this separation for the determination of these drugs following extraction from urine and using levallorphan as internal standard are reported. Detection limits in the region of 10 ng cm⁻³ are achieved when using electrokinetic injection. A comparison is made of the sensitivity and reproducibility of electrokinetic and hydrodynamic injection for these drugs. Data are presented to show the results obtained when the proposed method is applied to urine spiked with all the above opiates and also to urine from a subject following consumption of dihydrocodeine and pholcodine. The concentrations found are compared with those obtained by LC.     

Optimization of a capillary zone electrophoresis method by using a central composite factorial design for the determination of codeine and paracetamol in pharmaceuticals

Capillary zone electrophoresis was optimized to quantitatively determine codeine and paracetamol via central composite factorial design. Critical parameters (concentration, buffer, pH, voltage) assessed effects on resolution, analysis time and efficiencies. Optimum separation conditions were achieved using phosphate buffer 20 mM (pH 6.8) and voltage (15 kV). The optimized procedure easily determined codeine and paracetamol with separation in less than 3 min. Calibration curves (R > 0.999) were prepared, with LODs of 13.5 and 340 ng mL(-1) for codeine and paracetamol, respectively, and a good R.S.D.% (<3%). This method was applied to determine codeine and paracetamol in pharmaceutical formulations; recoveries coincided with stated contents.     

Screening and determination of β-blockers, narcotic analgesics and stimulants in urine by high-performance liquid chromatography with column switching

A fast method is described for the screening of eleven β-blockers, two narcotic analgesics and two stimulants in urine by HPLC with column switching. The urine sample (100 μl), buffered tto pH 9–9.5, is injected onto a short extraction column packed with CN stationary phase. The extraction is flushed with water for 2.5 min to elute polar matrix components to waste. The retained components are then backflushed by means of a six-port valve onto the ODS analytical column where they are separated. Phosphate buffer pH 3.0 and acetonitrile were used as mobile phase. Gradient elution was applied in the screening method to improve separation. Detection was performed with diode-array detector at 220, 235 and 300 nm. Recoveries were near 100%, precision was excellent and sensitivity about 0.25 μg/1. The speed up the quantitative analysis, the same method but with isocratic elution was successfully applied to the determination of acebutolol and metoprolol in urine samples collected 4 h after administration of the compounds as single doses.     

Micellar electrokinetic capillary chromatography for the determination of fluoxetine and its metabolite norfluoxetine in biological fluids

A micellar electrokinetic capillary chromatography (MEKC) for determining fluoxetine and its metabolite (norfluoxetine) is proposed. Optimal conditions for the quantitative separation were investigated. A background electrolyte solution consisting of 5 mM phosphate buffer adjusted to pH 12.3 and 40 mM of 1-decanesulfonic acid sodium salt (DSS), hydrodynamic injection and 25 kV of separation voltage were used. Good linearity and precision were obtained for both compounds. Detection limits of 0.2 mg/l for fluoxetine and norfluoxetine were obtained. The developed method is rapid and it has been applied to determine fluoxetine and its metabolite in human serum and urine. The samples were purified and enriched by means of extraction-preconcentration step with a preconditioned C18 cartridge and eluting the compounds with methanol.     

Direct coupled column separation and determination of the diastereomeric glucuronides of almokalant, a new class III antiarrhythmic drug, in human urine.

A reversed-phase coupled column separation (CCS) system for the analysis of two diastereomeric glucuronides of almokalant, a new class III antiarrhythmic drug, in human urine is described. After direct injection of urine samples (50 microliters) the glucuronides were isolated by complex formation on a terbium(III) loaded strong cation exchanger at alkaline pH. The solutes were eluted from the precolumn by an acidic mobile phase, enriched and separated on Hypercarb (porous graphitic carbon) as analytical column with 0.1 M acetic acid pH 2.8 and 30% acetonitrile as mobile phase. The calibration graph was linear (r2 = 0.9999) and the detection limits were in the low picomole (UV) or femtomole (fluorescence) range. Optimization of the analytical column revealed that elution order and selectivity for the glucuronides were dependent on the buffer agent and temperature used. By appropriate choice of mobile phase conditions all four diastereomers could be separated.     

Comparative studies of four protein preparation methods for proteomic study of the dinoflagellate Alexandrium sp. using two-dimensional electrophoresis

Alexandrium is a wide-spread genus of dinoflagellate causing harmful algal blooms and paralytic shellfish poisoning around the world. Proteomics has been introduced to the study of Alexandrium, but the protein preparation method is still unsatisfactory with respect to protein spot number, separation and resolution, and this has limited the application of a proteomic approach to the study of dinoflagellates. In this study we compared four protein preparation methods for the two-dimensional electrophoresis (2DE) analysis of A. tamarense: (1) urea/Triton X-100 buffer extraction with trichloroacetic acid (TCA)/acetone precipitation; (2) direct precipitation with TCA/acetone; (3) 40 mM Tris (hydroxymethyl) aminomethane (Tris) buffer extraction; and (4) 50 mM Tris/5% glycerol buffer extraction. The results showed that, among the four protein preparation methods, the method combining the urea/Triton X-100 buffer extraction and TCA/acetone precipitation allowed detection of the highest number and quality of protein spots with a clear background. Although the direct TCA/acetone precipitation method also detected a high number of protein spots with a clear background, the spot number, separation and intensity were not as good as those obtained from the urea/Triton X-100 buffer extraction with TCA/acetone precipitation method. The 40 mM Tris buffer and 50 mM Tris/5% glycerol buffer methods allowed the detection of fewer protein spots and a pH range only from 4 to 7. Subsequently, the urea/Triton X-100 buffer extraction with TCA/acetone precipitation method was successfully applied to profiling protein expression in A. catenella under light stress conditions and the differential expression proteins were identified using MALDI TOF–TOF mass spectrometry. The method developed here appears to be promising for further proteomic studies of this organism and related species.     

Simultaneous determination of l- and d-lactic acid in plasma by capillary electrophoresis

A novel method for simultaneous determination of d- and l-lactic acids in plasma was presented by capillary electrophoresis with photodiode array detection at 195nm. The separation was performed in an uncoated fused-silica capillary. The parameters influencing the resolution and the migration time of lactic acids were optimized. When 150mM phosphate-Tris buffer (pH 7.0) consisting of 220mM 2-hydroxypropyl-beta-cyclodextrin and 0.2mM tetradecyltrimethylammonium bromide was utilized as the running buffer, highly effective chiral separation of d- and l-lactic acids was achieved at about 42min at an effective voltage of -25kV. The resolution of lactic acid enantiomers was >/=1.25. The limits of detection of d- and l-lactic acids in standard solution without any pretreatment were 80 and 50muM (S/N=3), respectively. Sample pretreatment was preceded by protein-removal procedure with acetonitrile. With a pre-concentration procedure by 10 times, the limits of detection of d- and l-lactic acids were 20 and 15muM (S/N=10), respectively. The satisfactory analytical performance of the proposed method was validated.     

Separation and simultaneous detection of anticancer drugs in a microfluidic device with an amperometric biosensor

A simple and highly sensitive method for simultaneous detection of anticancer drugs is developed by integrating the preconcentration and separation steps in a microfluidic device with an amperometric biosensor. An amperometric detection with dsDNA and cardiolipin modified screen printed electrodes are used for the detection of anticancer drugs at the end of separation channel. The preconcentration capacity is enhanced thoroughly using field amplified sample stacking and field amplified sample injection techniques. The experimental parameters affecting the analytical performances, such as pH, temperature, buffer concentration, water plug length, and detection potential are optimized. A reproducible response is observed during multiple injections of samples with a RSD <5%. The calibration plots are linear with the correlation coefficient between 0.9913 and 0.9982 over the range of 2-60 pM. The detection limits of four drugs are determined to be between 1.2 (± 0.05) and 5.5 (± 0.3) fM. The applicability of the device to the direct analysis of anticancer drugs is successfully demonstrated in a real spiked urine sample. Device was also examined for interference effect of common chemicals present in real samples.     

High-performance liquid chromatography of the aromatase inhibitor, letrozole, and its metabolite in biological fluids with automated liquid-solid extraction and fluorescence detection

An analytical method for the determination of letrozole (CGS 20 267) in plasma and of letrozole and its metabolite, CGP 44 645, in urine is described. Automated liquid-solid extraction of compounds from plasma and urine was performed on disposable 100-mg C₈ columns using the ASPEC system. The separation was achieved on an ODS Hypersil C₁₈ column using acetonitrile-phosphate buffer, pH 7, as the mobile phase at a flow-rate of 1.5 ml/min. A fluorescence detector was used for the quantitation. The excitation and emission wavelengths were 230 and 295 nm, respectively. The limits of quantitation (LOQ) of letrozole in plasma and in urine were 1.40 nmol/l (0.4 ng/ml) and 2.80 nmol/l, respectively. The respective mean recoveries and coefficient of variation (C.V.) were 96.5% (9.8%) in plasma and 104% (7.7%) in urine. The LOQ of CGP 44 645 in urine was 8.54 nmol/l (2 ng/ml). The mean recovery was 108% (6.3%). The compounds were well separated from co-extracted endogenous components and no interferences were observed at the retention times of compounds. The sensitivity of this method for letrozole in plasma should be sufficient for kinetic studies in humans with single doses of 0.5 mg and possibly less.     

Rice bran lipase: extraction, activity, and stability

A simple procedure for the extraction of the lipolytic activity from rice bran has been developed. Various conditions of extraction have been optimized so as to obtain maximum yield of the lipase. It was found that high enzyme activity could be obtained by first defatting the rice bran to remove the lipid component. This was followed by five cycles of aqueous extraction (potassium phosphate buffer, 50 mM and pH 7, containing 0.5 mM of CaCl(2)). The stability of the rice bran lipase under storage and operative conditions was investigated. Further, the influence of glycerol as a stabilizer has been assessed. It was found that further purification using micro- and ultrafiltration yielded an enzyme preparation with higher activity and specific activity and better stability.     

Development of a capillary electrophoresis method for the determination of allopurinol and its active metabolite oxypurinol

A simple and sensitive capillary zone electrophoresis method with UV absorbance detection is described for the quantitation of allopurinol and its metabolite oxypurinol in aqueous solution. The influence of different parameters on migration times, peak symmetry, efficiency and resolution was systematically investigated; these parameters included the nature and concentration of the separation buffer, pH and applied voltage. A buffer consisting of 15 mM 2-[N-cyclohexylamino]ethanesulfonic acid (CHES) adjusted to pH 8.8 was found to provide a very efficient and stable electrophoretic system for the analysis of these compounds. The optimized method was validated with respect to precision, linearity, limits of detection and quantification, accuracy and robustness. The applicability of the assay was demonstrated by analyzing these compounds in serum and allopurinol in commercial pharmaceutical preparations.     

New approach for amino acid profiling in human plasma by selective fluorescence derivatization

A new approach for the separation of 6-aminoquinolyl-carbamyl (AQC)-derivatized amino acids has been proposed. The chromatography used ion-pairing mechanism to increase the method selectivity. Mobile phase was based on triethylamine buffer containing N,N-dimethyloctylamine as a modifier. A number of factors, buffer composition and pH, counterion concentration, temperature and acetonitrile gradient profile, were optimized to achieve final chromatographic conditions. With the presented analytical method, the separation and identification of 34 AQC-amino acids and amino compounds present in human plasma is possible. The results of validation proved the applicability of the method for quantification of 27 amino acids in biological samples. The ultrafiltration proposed as deproteinization procedure gave repeatable and reliable results for the amino acids under investigation. This method introduced in routine testing can be a suitable tool for amino acid profiling in plasma including all aspects of clinical application.     

Optimization of the chiral separation of some 2-arylpropionic acids on an avidin column by modeling a combined response

The enantiomeric separation of some nonsteroidal antiinflammatory drugs was investigated on an avidin column. An experimental design approach (central composite design) was used to evaluate the effects of three method parameters (pH, concentration of organic modifier, and buffer concentration) on the analysis time and the resolution, as well as to model these responses. This revealed that the organic modifier concentration and sometimes the pH are significant parameters to control because of their influence on both analysis time and resolution. Furthermore, the central composite design results were combined in a multicriteria decision-making approach in order to obtain a set of optimal experimental conditions leading to the most desirable compromise between resolution and analysis time.     

Determination of josamycin in rat plasma by capillary electrophoresis coupled with post-column electrochemiluminescence detection

A novel determination method for josamycin (JOS) based on capillary electrophoresis-electrochemiluminescence detection has been described. In this study, platinum disk electrode (300 microm in diameter) was used as a working electrode and the conditions affecting separation and detection were investigated in detail. Under optimal condition: 40 cm separation capillary (75 microm i.d.); 1.25 V applied potential on the Pt disc of the ECL detector cell; 5 mM Ru(bpy)3(2+) and 50mM phosphate buffer (pH 7.5) in the detection cell; 12 kV separation voltage; 8s injection time; 10 kV injection voltage and 15 mM running buffer (pH 7.5), calibration curve was linear over the range from 10 ng/mL to 5.0 microg/mL with a detection limit of 3.1 ng/mL at a signal-to-noise ratio of 3. The method can be successfully applied for the determination of josamycin in rat plasma in 6 min and the extraction recoveries with spiked plasma samples were over 92%.     

Chiral resolutions of (9-anthryl)methoxyacetic acid and (9-anthryl)hydroxyacetic acid by capillary electrophoresis

The resolutions of (9-anthryl)methoxyacetic acid (9AMAA) and (9-anthryl)hydroxyacetic acid (9AHAA) were performed by capillary electrophoresis using hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as a chiral selector. Various factors affecting migration time and resolutions of these compounds were investigated with a run voltage of 20 kV, column temperature 20 degrees C and 20 mM Tris-H(3)PO(4) buffer (pH 6.5) containing 5 mM HP-beta-CD for 9AMAA, or 10 mM HP-beta-CD for 9AHAA, (+/-)-9AMAA and (+/-)-9AHAA were successfully separated at Rs 3.27 and 1.92, respectively.     

Simultaneous determination of 19 intracellular nucleotides and nucleotide sugars in Chinese Hamster ovary cells by capillary electrophoresis

Twelve nucleotides and seven nucleotide sugars in Chinese Hamster ovary (CHO) cells were determined by capillary electrophoresis (CE). The CE operating conditions of buffer pH value, ion strength, capillary temperature, polymer additive and cell extraction method were investigated. Optimum separation was achieved with 40 mM sodium tetraborate buffer (pH 9.5) containing 1% (w/v) polyethylene glycol (PEG) at a capillary temperature of 22 degrees C. Acetonitrile and chloroform were used for intracellular extraction. This method can be used to monitor intracellular carbohydrate metabolism.