可直接克隆PCR产物的克隆载体的构建

本文描述一种构建与PCR产物直接连接的克隆载体的方法。以高拷贝克隆载体pUC118为骨架载体,在pUC118质粒氨苄抗性基因的Eam1105 I 酶切位点上,以点突变的方式封闭Eam1105 I 酶切位点。经转化大肠杆菌JM109证实,该改造过的pUC118质粒,可使宿主细胞仍具有氨苄抗性。将一人工合成的具有两个Eam1105 I 酶切位点的互补寡聚核苷酸链（两端具有BamH I 接头）插入已封闭Eam1105 I 酶切位点的pUC118*载体的BamH I 位点,构成新的克隆载体,此质粒命名为pUC118E。该载体经Eam1105 I 酶切后,可产生3′末端突出一个T碱基的T-载体,能与PCR产物直接连接。 Abstract:A new method for construction of a cloning vector (T-vector) for direct ligation with PCR products was described.The T-vector derived from pUC118 in which the unique restriction site of Eam1105 I in the region of Ampr gene was deleted and an artificial DNA fragment flanking two Eam1105 I was introduced at the site of BamHI.The modified vector was named as pUC118E.A T-vector with 3′over hang end of a single T can be obtained via digesting of pUC118E with Eam1105I.PCR products can be easily cloned with this T-vector.     

基于XcmⅠ酶切的高效TA克隆载体的构建

目的：制备基于XcmⅠ酶切的高效TA克隆载体,并检测其克隆PCR产物的效果。方法：设计一对互补配对的寡核苷酸,经过变性及退火后插入质粒pUC19的多克隆位点,从而在该多克隆位点中引入2个XcmⅠ酶切位点,用XcmⅠ酶切后即获得含有3’突出T碱基的T载体;为了提高该T载体的克隆效率,优化了2个XcmⅠ酶切位点之间的碱基数目,排除了载体自连产生白色克隆的可能性,使假阳性大大减少;此外,为了便于完全酶切与未完全酶切载体的分离,在2个XcmⅠ之间插入了一段无关DNA片段。结果：改进得到的T载体可以有效克隆PCR产物,其阳性克隆率可达95％。结论：构建了基于XcmⅠ酶切的TA克隆载体,经过改进的T载体具有很高的克隆效率。     

Development of a novel T-vector supporting efficient green-white screening

T-vectors play an important role in cloning of polymerase chain reaction products. In the present study, a novel pUEG-T vector was developed using enhanced green fluorescent protein (EGFP) as an indicator. To improve EGFP-based green-white screening, the lipoprotein mutant promoter, a strong constitutive promoter, was utilized to control the expression of egfp gene. Two other efficient expression elements, the ColE1 replication origin of pUC18 and the expression cassette of pET-28a, were also integrated into pUEG-T vector. Expression analysis demonstrated the efficient accumulation of active EGFPs in Escherichia coli DH5α cells carrying the T-vector precursor pUEG. In T-A cloning using pUEG-T vector, white colonies containing foreign DNA and green colonies having no insertion could be handily distinguished under normal white light, without any chemical inducer or chromogenic substrate. Furthermore, no false positive was observed in any of the tested white colonies. This proves that pUEG-T is an inexpensive, convenient and efficient T-vector.     

An efficient plasmid vector for expression cloning of large numbers of PCR fragments in <Emphasis Type="Italic">Escherichia coli</Emphasis>

The described plasmid pEamTA was designed for parallel polymerase chain reaction (PCR) cloning of open reading frames (ORFs) in Escherichia coli. It relies on the well-known TA-cloning principle, and the “T-vector” can be generated from a plasmid preparation by digestion with the restriction enzyme Eam1105I. The single 3′-T-overhangs of the vector fragment are positioned in a way that A-tailed PCR-products beginning with the start-ATG of an ORF end up in optimal position for expression from a strong tac-promoter when ligated in correct orientation. The orientation of the insert can be checked via a reconstituted NdeI site (catATG) present in correct clones. The protocol works regardless of internal restriction sites of the PCR fragment, a major advantage when cloning a number of fragments in parallel. It also does not require 5′-primer extensions and finally delivers an expression clone for the preparation of untagged protein in less than a week.     

Universal TA cloning

TA cloning is one of the simplest and most efficient methods for the cloning of PCR products. The procedure exploits the terminal transferase activity of certain thermophilic DNA polymerases, including Thermus aquaticus (Taq) polymerase. Taq polymerase has non-template dependent activity which preferentially adds a single adenosine to the 3'-ends of a double stranded DNA molecule, and thus most of the molecules PCR amplified by Taq polymerase possess single 3'-A overhangs. The use of a linearized "T-vector" which has single 3'-T overhangs on both ends allows direct, high-efficiency cloning of PCR products, facilitated by complementarity between the PCR product 3'-A overhangs and vector 3'-T overhangs. The TA cloning method can be easily modified so that the same T-vector can be used to clone any double-stranded DNA fragment, including PCR products amplified by any DNA polymerase, as well as all blunt- and sticky-ended DNA species. This technique is especially useful when compatible restriction sites are not available for the subcloning of DNA fragments from one vector to another. Directional cloning is made possible by appropriate hemi-phosphorylation of both the T-vectors and the inserts. With a single T-vector at hand, any DNA fragment can be cloned without compromising the cloning efficiency. The universal TA cloning method is thus both convenient and labor-saving.     

A hybrid promoter-containing vector for direct cloning and enhanced expression of PCR-amplified ORFs in mammalian cells

An efficient vector, designated as pCAGX, was designed for direct cloning and enhanced expression of PCR-amplified ORFs in mammalian cells. It relied on the well-known TA-cloning principle, and utilized the CMV enhancer/chicken β-actin/rabbit β-globin (CAG) hybrid promoter instead of the classical CMV promoter to drive more efficient transgene expression in wider host cells. The specially designed cassette under CAG hybrid promoter contained two tandemly arrayed XcmI sites which were spaced by an additional EcoRV site. For direct cloning and expressing PCR-amplified ORFs, the T-vector was prepared by further digesting the EcoRV-linearized pCAGX with XcmI to produce T tails on both 3′-ends, which could efficiently minimize the non-recombinant background of T-vector and eliminate the necessity of selective marker genes such as LacZ that allowed blue/white screening. Various PCR fragments in length were prepared to verify the cloning efficiency by ligation with this vector, and GFP gene expression under control of the CAG hybrid promoter in different host cells was assayed by flow cytometry. The results indicated that this vector was higher efficient, especially suitable for cloning and expressing a number of interesting ORFs in parallel, and higher-level transgene expression in different mammalian cells was obtained than the reported vectors using the CMV promoter.     

一种构建新型T载体的简便方法及应用

T载体能够用于PCR产物的快速克隆且易于操作。以常用的克隆载体pGEM-3zf(+)为出发材料,将其进行改造为通用的T载体。通过一步反向PCR方法在该载体中插入带有Xcm I酶切位点的一段序列,在Xcm I酶的切割下产生两端含有T核苷酸的线型核苷酸序列,最终获得用于克隆PCR产物的T载体。外源基因xdh克隆试验表明该载体构建成功,此载体完全可以用于PCR产物的基因克隆试验,为相关载体的改造提供了思路。     

The PRESAT-vector: asymmetric T-vector for high-throughput screening of soluble protein domains for structural proteomics

A rapid unidirectional method for cloning PCR-amplified cDNA fragments into virtually any fusion protein expression vector is described. The method, termed PRESAT-vector cloning, is based on a T-vector technique that does not require restriction endonuclease digestion of the PCR product. Subsequently, we applied a novel ORF selection method of the ligated plasmid products. This second step involves restriction endonuclease treatment that eliminates the plasmids containing an ORF in the wrong orientation prior to transformation into the bacterial host for further protein expression studies. To achieve this selection, we customized the 5'-sequence of the "rear" PCR primer corresponding to the C terminus of the protein to be expressed. The colonies harbored only the ligated products of the desired orientation at >90% efficiency. This method is applied to a GST fusion expression system, and an HTS system for soluble proteins from an expression library was tested.     

Creating seamless junctions independent of restriction sites in PCR cloning

A method is described for the efficient cloning of any given DNA sequence into any desired location without the limitation of naturally occurring restriction sites. The technique employs the polymerase chain reaction (PCR) combined with the capacity of the type-IIS restriction endonuclease (ENase) Eam1104I to cut outside its recognition sequence. Primers that contain the Eam1104I recognition site (5′-CTCTTC) are used to amplify the DNA fragments being manipulated. Because the ENase is inhibited by site-specific methylation in the recognition sequence, all internal Eam1104I sites present in the DNA can be protected by performing the PCR amplification in the presence of 5-methyl-deoxycytosine (^m5dCTP). The primer-encoded Eam1104I sites are not affected by the modified nucleotides (nt) since the newly synthesized strand does not contain any cytosine residues in the recognition sequence. In addition, the ENase's ability to cleave several bases downstream from its recognition site allows the removal of superfluous, terminal sequences from the amplified DNA fragments, resulting in 5′ overhangs that are defined by the nt present within the cleavage site. Thus, the elimination of extraneous nt and the generation of unique, non-palindromic sticky ends permits the formation of seamless junctions in a directional fashion during the subsequent ligation event.     

A novel vector for direct cloning PCR fragments by positive selection based on the lethal <Emphasis Type="Italic">barnase</Emphasis>

A novel vector for direct PCR fragments cloning by positive selection, pBN, was constructed based on the lethal barnase from Bacillus amyloliquefaciens. Barnase was modified by inserting an additional insert at a pivotal Ile-54 site, which could take crucial affect on protein structure and absolute activity. The lacZ’ expressing cassette of pUC19 was replaced by the modified barnase under the NptIII promoter. This novel vector could exist in large quantities as pUC19 in E. coli hosts. For the direct cloning PCR fragments, the positive selective vector was prepared by linearizing pBN with EcoRV to cut off the additional insert. PCR fragments with different length were prepared to verify this vector by ligation with this vector. The results showed that this positive selective vector for PCR fragment cloning was higher efficient and more convenient in manipulation than previous positive vectors.     

Construction of two Gateway vectors for gene expression in fungi

We report the construction of two Gateway fungal expression vectors pCBGW and pGWBF. The pCBGW was generated by introducing an expression cassette, which consists of a Gateway recombinant cassette (attR1-Cmr-ccdB-attR2) under the control of fungal promoter PgpdA and a terminator TtrpC, into the multiple cloning site of fungal vector pCB1004. The pGWBF is a binary vector, which was generated from the plant expression vector pGWB2 by replacing the CaMV35S promoter with PgpdA. The pGWBF can be transformed into fungi efficiently with Agrobacterium-mediated transformation. The applicability of two newly constructed vectors was tested by generating the destination vectors pGWBF-GFP and pCBGW-GFP and examining the expression of GFP gene in Trichoderma viride and Gibberella fujikuroi, respectively. Combining with the advantage of Gateway cloning technology, pCBGW and pGWBF will be useful in fungi for large-scale investigation of gene functions by constructing the interested gene destination/expression vectors in a high-throughput way.     

Isolation and characterization of restriction endonuclease EclHKI from an Enterobacter cloacae strain

An Enterobacter cloacae strain, producing restriction enzyme EclHKI, was isolated from a decaying potato. The enzyme is an isoschizomer of Eam1105I, which recognizes and cleaves GACNNN!NNGTC. EclHKI was produced at high activity (4×10⁴ U/g wet cells) and was purified from contaminants which interfere with restriction digestion by passing the cell lysate through DEAE-Sephacel and heparin columns. Activity was optimal at 37°C in a medium salt buffer.H.-Y. Chan, Y.-C. Chan and P.-C. Shaw are with the Department of Biochemistry, The Chinese University of Hong Kong, Hong Kong: K.-M. Kam is with the Institute of Pathology, Sai Ying Pun Jockey Club Clinic, Hong Kong.     

pEGFP-T,a novel T-vector for the direct,unidirectional cloning and analysis of PCR-amplified promoters

A novel T-vector, designated as pEGFP-T, was constructed which could be used for direct and unidirectional cloning and analysis of promoters. The method involves minimizing the non-recombinant background of the T-vector when used to clone PCR products, and maintaining only the forward orientation of the PCR products prior to transformation. The usefulness of this vector is demonstrated in cloning and analyzing promoters. Baoli Wang and Xiaoxia Li contributed equally to this work     

Simple Method for Markerless Gene Deletion in Multidrug-Resistant Acinetobacter baumannii

The traditional markerless gene deletion technique based on overlap extension PCR has been used for generating gene deletions in multidrug-resistant Acinetobacter baumannii. However, the method is time-consuming because it requires restriction digestion of the PCR products in DNA cloning and the construction of new vectors containing a suitable antibiotic resistance cassette for the selection of A. baumannii merodiploids. Moreover, the availability of restriction sites and the selection of recombinant bacteria harboring the desired chimeric plasmid are limited, making the construction of a chimeric plasmid more difficult. We describe a rapid and easy cloning method for markerless gene deletion in A. baumannii, which has no limitation in the availability of restriction sites and allows for easy selection of the clones carrying the desired chimeric plasmid. Notably, it is not necessary to construct new vectors in our method. This method utilizes direct cloning of blunt-end DNA fragments, in which upstream and downstream regions of the target gene are fused with an antibiotic resistance cassette via overlap extension PCR and are inserted into a blunt-end suicide vector developed for blunt-end cloning. Importantly, the antibiotic resistance cassette is placed outside the downstream region in order to enable easy selection of the recombinants carrying the desired plasmid, to eliminate the antibiotic resistance cassette via homologous recombination, and to avoid the necessity of constructing new vectors. This strategy was successfully applied to functional analysis of the genes associated with iron acquisition by A. baumannii ATCC 19606 and to ompA gene deletion in other A. baumannii strains. Consequently, the proposed method is invaluable for markerless gene deletion in multidrug-resistant A. baumannii.