National validation study of a swab protocol for the recovery of Bacillus anthracis spores from surfaces

Twelve Laboratory Response Network (LRN) affiliated laboratories participated in a validation study of a macrofoam swab protocol for the recovery, detection, and quantification of viable B. anthracis (BA) Sterne spores from steel surfaces. CDC personnel inoculated steel coupons (26 cm²) with 1-4 log₁₀ BA spores and recovered them by sampling with pre-moistened macrofoam swabs. Phase 1 (P1) of the study evaluated swabs containing BA only, while dust and background organisms were added to swabs in Phase 2 (P2) to mimic environmental conditions. Laboratories processed swabs and enumerated spores by culturing eluted swab suspensions and counting colonies with morphology consistent with BA. Processed swabs were placed in enrichment broth, incubated 24 h, and cultured by streaking for isolation. Real-time PCR was performed on selected colonies from P2 samples to confirm the identity of BA. Mean percent recovery (%R) of spores from the surface ranged from 15.8 to 31.0% (P1) and from 27.9 to 55.0% (P2). The highest mean percent recovery was 31.0% (sd 10.9%) for P1 (4 log₁₀ inoculum) and 55.0% (sd 27.6%) for P2 (1 log₁₀ inoculum). The overall %R was higher for P2 (44.6%) than P1 (24.1%), but the overall reproducibility (between-lab variability) was lower in P2 than in P1 (25.0 vs 16.5%CV, respectively). The overall precision (within-lab variability) was close to identical for P1 and P2 (44.0 and 44.1, respectively), but varied greatly between inoculum levels. The protocol demonstrated linearity in %R over the three inoculum levels and is able to detect between 26 and 5 × 10⁶ spores/26 cm². Sensitivity as determined by culture was > 98.3% for both phases and all inocula, suggesting that the culture method maintains sensitivity in the presence of contaminants. The enrichment broth method alone was less sensitive for sampled swabs (66.4%) during P2, suggesting that the presence of background organisms inhibited growth or isolation of BA from the broth. The addition of real-time PCR testing to the assay increased specificity from > 85.4% to > 95.0% in P2. Although the precision was low at the 1 log₁₀ inoculum level in both phases (59.0 and 50.2%), this swab processing protocol, was sensitive, specific, precise, and reproducible at 2-4 log₁₀/26 cm² spore concentrations.     

Most-Probable-Number Rapid Viability PCR method to detect viable spores of Bacillus anthracis in swab samples

A comparison of Most-Probable-Number Rapid Viability (MPN RV) PCR and traditional culture methods for the quantification of Bacillus anthracis Sterne spores in macrofoam swabs from a multi-center validation study was performed. The purpose of the study was to compare environmental swab processing methods for recovery, detection, and quantification of viable B. anthracis spores from surfaces. Results show that spore numbers provided by the MPN RV-PCR method were typically within 1-log of the values from a plate count method for all three levels of spores tested (3.1 × 10⁴, 400, and 40 spores sampled from surfaces with swabs) even in the presence of debris. The MPN method tended to overestimate the expected result, especially at lower spore levels. Blind negative samples were correctly identified using both methods showing a lack of cross contamination. In addition to detecting low levels of spores in environmental conditions, the MPN RV-PCR method is specific, and compatible with automated high-throughput sample processing and analysis protocols, enhancing its utility for characterization and clearance following a biothreat agent release.     

Rapid sporulation of Bacillus anthracis in a high iron, glucose-free medium

Spores are the infectious form of Bacillus anthracis (BA), causing cutaneous, inhalation and gastrointestinal anthrax. Because of the possible use of BA spores in a bioterrorism attack, there is considerable interest in studying spore biology. In the laboratory, however, it takes a number of days to prepare spores. Standard sporulation protocols, such as the use of ‘PA broth’, allow sporulation of BA to occur in 3 to 5 days. Another method employs growth of BA on plates in the dark for several days until they have efficiently sporulated. In efforts to determine the effect of iron on gene expression in BA, we grew BA Sterne strain 7702 in a minimal defined medium (CDM; Koppisch et al., 2005) with various concentrations of iron and glucose. As part of our initial observations, we monitored BA sporulation in CDM via light microscopy. In glucose-free CDM containing 1.5 mM Fe(NO₃)₃ (CDM-Fe), > 95% of the BA sporulated by 30 h; a far shorter time period than expected. We pursued this observation and we further characterized spores derived from PA and CDM-Fe media. Purified spores derived from PA or CDM-Fe had similar morphologies when viewed by light or electron microscopy, and were equally resistant to harsh conditions including heat (65 °C), ice and fresh 30% H₂O₂. Spore viability in long term cold storage in water was similar for the two spore preparations. Extracted spore coat proteins were evaluated by SDS-PAGE and silver staining, which revealed distinct protein profiles for PA and CDM-Fe spore coat extracts. ELISA assays were done to compare the interaction of the two spore preparations with rabbit antiserum raised against UV-killed Sterne strain 7702 spores prepared in PA medium. Spores from both media reacted identically with this antiserum. Finally, the interaction and fate of spores incubated with macrophages in vitro was very similar. In summary, BA spores induced in CDM-Fe or in PA medium are similar by several criteria, but show distinct extractable coat proteins. CDM-Fe liquid medium can be used for rapid production of BA spores, and could save considerable time in spore research studies.     

MoxT toxin of Bacillus anthracis exhibits sequence specific ribonuclease activity

MoxXT module of Bacillus anthracis encodes MoxX, a labile protein and MoxT, a ribonuclease. However, mechanism of cleavage of RNA by MoxT has not been explored till date. In the present study, we have demonstrated that MoxT is a sequence specific ribonuclease which recognizes UACAU sequence in ss RNA and cleaves between U and A. Moreover, cleavage of RNA requires 2′ OH group of first residue, i.e. U of UACAU RNA sequence. An interesting finding which makes it distinct from the other MazF family toxins was also observed, i.e. its ability to cleave RNA in DNA–RNA hybrid.     

In situ detection of antibiotic-resistance elements in single Bacillus cereus spores

Rapid detection of Bacillus spores is a challenging task in food and defense industries. In situ labeling of spores would be advantageous for detection by automated systems based on single-cell analysis. Determination of antibiotic-resistance genes in bacterial spores using in situ labeling has never been developed. Most of the in situ detection schemes employ techniques such as fluorescence in situ hybridization (FISH) that target the naturally amplified ribosomal RNA (rRNA). However, the majority of antibiotic-resistance genes has a plasmidic or chromosomal origin and is present in low copy numbers in the cell. The main challenge in the development of low-target in situ detection in spores is the permeabilization procedure and the signal amplification required for detection. This study presents permeabilization and in situ signal amplification protocols, using Bacillus cereus spores as a model, in order to detect antibiotic-resistance genes. The permeabilization protocol was designed based on the different layers of the Bacillus spore. Catalyzed reporter deposition (CARD)–FISH and in situ polymerase chain reaction (PCR) were used as signal amplification techniques. B. cereus was transformed with the high copy number pC194 and low copy number pMTL500Eres plasmids in order to induce resistance to chloramphenicol and erythromycin, respectively. In addition, a rifampicin-resistant B. cereus strain, conferred by a single-nucleotide polymorphism (SNP) in the chromosome, was used. Using CARD–FISH, only the high copy number plasmid pC194 was detected. On the other hand, in situ PCR gave positive results in all tested instances. This study demonstrated that it was feasible to detect antibiotic-resistance genes in Bacillus spores using in situ techniques. In addition, in situ PCR has been shown to be more sensitive and more applicable than CARD–FISH in detecting low copy targets.     

Comparative analysis of the virulence of invertebrate and mammalian pathogenic bacteria in the oral insect infection model Galleria mellonella

Infection of Galleria mellonella by feeding a mixture of Bacillus thuringiensis spores or vegetative bacteria in association with the toxin Cry1C results in high levels of larval mortality. Under these conditions the toxin or bacteria have minimal effects on the larva when inoculated separately. In order to evaluate whether G. mellonella can function as an oral infection model for human and entomo-bacterial pathogens, we tested strains of Bacillus cereus, Bacillus anthracis, Enterococcus faecalis, Listeria monocytogenes, Pseudomonas aeruginosa and a Drosophila targeting Pseudomonas entomophila strain. Six B. cereus strains (5 diarrheal, 1 environmental isolate) were first screened in 2nd instar G. mellonella larvae by free ingestion and four of them were analyzed by force-feeding 5th instar larvae. The virulence of these B. cereus strains did not differ from the B. thuringiensis virulent reference strain 407Cry⁻ with the exception of strain D19 (NVH391/98) that showed a lower virulence. Following force-feeding, 5th instar G. mellonella larvae survived infection with B. anthracis, L. monocytogenes, E. faecalis and P. aeruginosa strains in contrast to the P. entomophila strain which led to high mortality even without Cry1C toxin co-ingestion. Thus, specific virulence factors adapted to the insect intestine might exist in B. thuringiensis/B. cereus and P. entomophila. This suggests a co-evolution between host and pathogens and supports the close links between B. thuringiensis and B. cereus and more distant links to their relative B. anthracis.     

Delayed treatment with doxycycline has limited effect on anthrax infection in BLK57/B6 mice

Blk57/B6 mice were infected with LD90 dose of Sterne strain anthrax spores subcutaneously and then treated with doxycycline. Doxycycline at a dose of 1.5mg/kg, by intra-peritoneal injection, protected mice from death when given at the same time as spores. When doxycycline administration was delayed 4h survival is 90%. Delay of 24h increased survival time but had no impact on eventual mortality. When doxycycline was delayed 48h, mortality and time to death were comparable to sham injection. Peritoneal macrophages harvested from Blk57/B6 mice were examined for response to anthrax lethal toxin and are shown to be deficient in their ability to produce TNF-alpha and have increased expression of IL-6 compared to RAW 264.7 murine macrophage cell line. These findings suggest that antibiotic therapy has limited effects following lethal anthrax spore challenge, even when the host is of a phenotype that does not produce TNF-alpha in response to anthrax lethal toxin exposure.     

Synthesis of an anthrose derivative and production of polyclonal antibodies for the detection of anthrax spores

A straightforward synthesis of a derivative of anthrose, the non-reducing terminal fragment of the antigenic tetrasaccharide from Bacillus anthracis, was achieved starting from d-galactose. This hapten is able to induce a highly specific and sensitive immune response in rabbit when attached to a carrier protein.     

Peptides panned from a phage-displayed random peptide library are useful for the detection of Bacillus anthracis surrogates B. cereus 4342 and B. anthracis Sterne

Recent use of Bacillus anthracis as a bioweapon has highlighted the need for a sensitive monitoring system. Current bacterial detection tests use antibodies as bio-molecular recognition elements which have limitations with regard to time, specificity and sensitivity, creating the need for new and improved cost-effective high-affinity detection probes. In this study, we screened a commercially available bacteriophage-displayed random peptide library using Bacillus cereus 4342 cells as bait to identify peptides that could be used for detection of Bacillus. The method enabled us to identify two 12-amino acid consensus peptide sequences that specifically bind to B. cereus 4342 and B. anthracis Sterne, the nonpathogenic surrogates of B. anthracis strain. The two Bacillus-binding peptides (named BBP-1 and BBP-2) were synthesized with biotin tag to confirm their binding by four independent detection assays. Dot-blot analysis revealed that the peptides bind specifically to B. cereus 4342 and B. anthracis Sterne. Quantitative analysis of this interaction by ELISA and fluorometry demonstrated a detection sensitivity of 10² colony forming U/ml (CFU/ml) by both assays. When the peptides were used in combination with Qdots, the sensitivity was enhanced further by enabling detection of even a single bacterium by fluorescence microscopy. Immunoblot analysis and protein sequencing showed that BBP-1 and BBP-2 bound to the S-layer protein of B. anthracis Sterne. Overall, our findings validate the usefulness of synthetic versions of phage-derived peptides in combination with Qdot-liquid nanocrystals as high sensitivity bioprobes for various microbial detection platforms.     

Western blot analysis of the exotoxin components from Bacillus anthracis separated by isoelectric focusing gel electrophoresis

The components of the Bacillus anthracis exotoxins, protective antigen (PA), lethal factor (LF), and edema factor (EF), from 24 isolates were separated by isoelectric focusing gel electrophoresis and detected by Western blot with monoclonal antibodies. Only two isoforms each were observed for PA and EF. Four isoforms were identified for LF. The biological activities of both lethal toxin and edema toxin were measured by using in vitro cell-based assays. This study provides another method of characterizing various isolates of B. anthracis by determining the isoelectric points of the exotoxin components and may be useful in the development of protective vaccines against B. anthracis infection.     

Natural biopolymer for preservation of microorganisms during sampling and storage

Stability of microbial cultures during sampling and storage is a vital issue in various fields of medicine, biotechnology, food science, and forensics. We have developed a unique bacterial preservation process involving a non-toxic, water-soluble acacia gum polymer that eliminates the need for refrigerated storage of samples.The main goal of this study is to characterize the efficacy of acacia gum polymer for preservation of pathogenic bacteria (Bacillus anthracis and methicillin-resistant Staphylococcus aureus—MRSA) on different materials, used for swabbing and filtration: cotton, wool, polyester, rayon, charcoal cloth, and Whatman paper.Acacia gum polymer used for preservation of two pathogens has been shown to significantly protect bacteria during dehydration and storage in all tested samples at the range of temperatures (5-45 °C for MRSA and 40-90 °C for B. anthracis). Our results showed higher recovery as well as higher viability during the storage of both bacteria in all materials with acacia gum. Addition of acacia gum polymer to swabbing materials or filters will increase efficacy of sample collection and identification of pathogenic bacteria from locations such as hospitals or the environment. Proposed approach can also be used for long-term storage of culture collections, since acacia gum contributes to viability and stability of bacterial cultures.     

Quantification methods for Bacillus cereus vegetative cells and spores in the gastrointestinal environment

There is an interest to understand the fate and behaviour of the food-borne pathogen Bacillus cereus in the gut, a challenging environment with a high bacterial background. We evaluated the current detection methods to select an appropriate strategy for B. cereus monitoring during gastrointestinal experiments. Application of quantitative real-time PCR (qPCR) in a gastrointestinal matrix required careful selection of the qPCR reaction and elaborate optimization of the DNA extraction protocol. Primer competition and depletion problems associated with qPCR reactions targeting general 16S rRNA gene can be avoided by the selection of a target sequence that is unique for and widespread among the target bacteria, such as the toxin gene nheB in the case of pathogenic B. cereus. Enumeration of B. cereus during the ileum phase was impossible by plating due to overgrowth by intestinal bacteria, while a carefully optimized qPCR enabled specific detection and quantification of B. cereus. On the other hand, plating allowed the distinction of viable, injured and dead bacteria and the germination of spores, which was not possible with qPCR. In conclusion, both plating and qPCR were necessary to yield the maximal information regarding the viability and physiology of the B. cereus population in various gastrointestinal compartments.     

Detection technologies for Bacillus anthracis: Prospects and challenges

Bacillus anthracis is a Gram-positive, spore-forming bacterium representing the etiological agent of acute infectious disease anthrax, a lethal but rare disease of animals and humans in nature. With recent use of anthrax as a bioweapon, a number of techniques have been recently developed and evaluated to facilitate its rapid detection of B. anthracis in the environment as well as in point-of-care settings for humans suspected of exposure to the pathogen. Complex laboratory methods for B. anthracis identification are required since B. anthracis has similarities with other Bacillus species and its existence in both spore and vegetative forms. This review discusses current challenges and various improvements associated with anthrax agent detection.     

Development of a rapid and sensitive immunoassay for detection and subsequent recovery of Bacillus anthracis spores in environmental samples

Bacillus anthracis is considered a major threat as an agent of bioterrorism. B. anthracis spores are readily dispersed as aerosols, are very persistent, and are resistant to normal disinfection treatments. Immunoassays have been developed to rapidly detect B. anthracis spores at high concentrations. However, detection of B. anthracis spores at lower concentrations is problematic due to the fact that closely related Bacillus species (e.g., B. thuringiensis) can cross-react with anti-B. anthracis antibodies, resulting in false positive detections. Subsequent polymerase chain reaction (PCR) analysis is required to differentiate virulent strains. We report here on a protocol for the rapid, sensitive detection of B. anthracis spore using the Integrating Waveguide Biosensor followed by a method for the rapid release and germination of immunocaptured spores. A detection limit of ca. 10³ spores was achieved by incubating spores simultaneously with capture and detection antibodies (“liquid-phase” assay) prior to capture on capillary tubes/waveguides. Subsequent incubation with BHI broth directly in capillary tubes allowed for rapid germination, outgrowth, and release of spores, resulting in vegetative cells for PCR analysis.     

A multiplex bead-based suspension array assay for interrogation of phylogenetically informative single nucleotide polymorphisms for Bacillus anthracis

Single nucleotide polymorphisms (SNPs) are abundant in genomes of all species and represent informative DNA markers extensively used to analyze phylogenetic relationships between strains. Medium to high throughput, open methodologies able to test many SNPs in a minimum time are therefore in great need. By using the versatile Luminex® xTAG technology, we developed an efficient multiplexed SNP genotyping assay to score 13 phylogenetically informative SNPs within the genome of Bacillus anthracis. The Multiplex Oligonucleotide Ligation-PCR procedure (MOL-PCR) described by Deshpande et al., 2010 has been modified and adapted for simultaneous interrogation of 13 biallelic canonical SNPs in a 13-plex assay. Changes made to the originally published method include the design of allele-specific dual-priming-oligonucleotides (DPOs) as competing detection probes (MOLigo probes) and use of asymmetric PCR reaction for signal amplification and labeling of ligation products carrying SNP targets. These innovations significantly reduce cross-reactivity observed when initial MOLigo probes were used and enhance hybridization efficiency onto the microsphere array, respectively. When evaluated on 73 representative samples, the 13-plex assay yielded unambiguous SNP calls and lineage affiliation. Assay limit of detection was determined to be 2 ng of genomic DNA. The reproducibility, robustness and easy-of-use of the present method were validated by a small-scale proficiency testing performed between four European laboratories. While cost-effective compared to other singleplex methods, the present MOL-PCR method offers a high degree of flexibility and scalability. It can easily accommodate newly identified SNPs to increase resolving power to the canSNP typing of B. anthracis.     

Direct investigation of viscosity of an atypical inner membrane of Bacillus spores: A molecular rotor/FLIM study

We utilize the fluorescent molecular rotor Bodipy-C₁₂ to investigate the viscoelastic properties of hydrophobic layers of bacterial spores Bacillus subtilis. The molecular rotor shows a marked increase in fluorescence lifetime, from 0.3 to 4 ns, upon viscosity increase from 1 to 1500 cP and can be incorporated into the hydrophobic layers within the spores from dormant state through to germination. We use fluorescence lifetime imaging microscopy to visualize the viscosity inside different compartments of the bacterial spore in order to investigate the inner membrane and relate its compaction to the extreme resistance observed during exposure of spores to toxic chemicals. We demonstrate that the bacterial spores possess an inner membrane that is characterized by a very high viscosity, exceeding 1000 cP, where the lipid bilayer is likely in a gel state. We also show that this membrane evolves during germination to reach a viscosity value close to that of a vegetative cell membrane, ca. 600 cP. The present study demonstrates quantitative imaging of the microscopic viscosity in hydrophobic layers of bacterial spores Bacillus subtilis and shows the potential for further investigation of spore membranes under environmental stress.     

Screen of Bacillus thuringiensis toxins for transgenic rice to control Sesamia inferens and Chilo suppressalis

Transgenic rice to control stem borer damage is under development in China. To assess the potential of Bacillus thuringiensis (Bt) transgenes in stem borer control, the toxicity of five Bt protoxins (Cry1Aa, Cry1Ab, Cry1Ac, Cry1Ba and Cry1Ca) against two rice stem borers, Sesamia inferens (pink stem borer) and Chilo suppressalis (striped stem borer), was evaluated in the laboratory by feeding neonate larvae on artificial diets containing Bt protoxins. The results indicated that Cry1Ca exhibited the highest level of toxicity to both stem borers, with an LC₅₀ of 0.24 and 0.30 μg/g for C. suppressalis and S. inferens, respectively. However, S. inferens was 4-fold lower in susceptibility to Cry1Aa, and 6- and 47-fold less susceptible to Cry1Ab and Cry1Ba, respectively, compared to C. suppressalis. To evaluate interactions among Bt protoxins in stem borer larvae, toxicity assays were performed with mixtures of Cry1Aa/Cry1Ab, Cry1Aa/Cry1Ca, Cry1Ac/Cry1Ca, Cry1Ac/Cry1Ba, Cry1Ab/Cry1Ac, Cry1Ab/Cry1Ba, and Cry1Ab/Cry1Ca at 1:1 (w/w) ratios. All protoxin mixtures demonstrated significant synergistic toxicity activity against C. suppressalis, with values of 1.6- to 11-fold higher toxicity than the theoretical additive effect. Surprisingly, all but one of the Bt protoxin mixtures were antagonistic in toxicity to S. inferens. In mortality-time response experiments, S. inferens demonstrated increased tolerance to Cry1Ab and Cry1Ac compared to C. suppressalis when treated with low or high protoxin concentrations. The data indicate the utility of Cry1Ca protoxin and a Cry1Ac/Cry1Ca mixture to control both stem borer populations.     

Coleopteran-specific and putative novel cry genes in Iranian native Bacillus thuringiensis collection

The characterization of the strains containing Coleopteran-specific and also putative novel cry genes in Iranian native Bacillus thuringiensis collection is presented. Characterization was based on PCR analysis using 31 general and specific primers for cry1B, cry1I, cry3A, cry3B, cry3C, cry7A, cry8A, cry8B, cry8C, cry14, cry18, cry26, cry28, cry34 and cry35 genes, protein band patterns as well as their insecticidal activity on Xanthogaleruca luteola Mull. larvae. Forty six isolates (65.7%) contained minimum one Coleopteran-active cry gene. Based on universal primers, strains containing cry18 and cry26 genes were the most abundant and represent 27.1% and 24% of the isolates, respectively, whereas cry14, cry3, cry28, cry34, cry35, cry7, cry8 genes were less abundant, found in 14.2, 12.5, 10, 7, 7 and 5.6% of the strains, respectively. Based on specific primers, isolates containing cry1I were the most abundant (48.5%). Two strains containing Coleopteran-active cry genes showed higher activity against X. luteola larvae than B. thuringiensis subsp. morrisoni pathovar tenebrionis. Thirty isolates, when assayed for cry1C, cry5, cry6, cry8b, cry9, cry10, cry11, cry18, cry24 and cry35 genes, showed unexpected size bands. Cloning and sequencing of the amplicons allowed both the identification of known cry genes and the detection of putative novel cry1C sequences.     

Production of a novel bioflocculant by Bacilluslicheniformis X14 and its application to low temperature drinking water treatment

A novel bioflocculant ZS-7 produced by Bacillus licheniformis X14 was investigated with regard to its synthesis and application to low temperature drinking water treatment. The effects of culture conditions including pH, carbon source, nitrogen source, temperature, inoculum size and shaking speed on ZS-7 production were studied. The purified bioflocculant was identified as a glycoprotein consisting of polysaccharide (91.5%, w/w) and protein (8.4%, w/w), with an approximate molecular weight of 6.89 × 10⁴ Da. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) indicated the presence of amino, amide, carboxyl, methoxyl and hydroxyl groups. This bioflocculant showed good flocculating performance and industrial potential for treatment of low temperature drinking water, and the maximum removal efficiencies of COD_Mn and turbidity were 61.2% and 95.6%, respectively, which were better than conventional chemical flocculants. Charge neutralization and bridging were proposed as the reasons for the enhanced performance based upon the experimental observations.     

Conjugal transfer between Bacillus thuringiensis and Bacillus cereus strains is not directly correlated with growth of recipient strains

Bacillus thuringiensis and Bacillus cereus belong to the B. cereus species group. The two species share substantial chromosomal similarity and differ mostly in their plasmid content. The phylogenetic relationship between these species remains a matter of debate. There is genetic exchange both within and between these species, and current evidence indicates that insects are a particularly suitable environment for the growth of and genetic exchange between these species. We investigated the conjugation efficiency of B. thuringiensis var. kurstaki KT0 (pHT73-Em^R) as a donor and a B. thuringiensis and several B. cereus strains as recipients; we used one-recipient and two-recipient conjugal transfer systems in vitro (broth and filter) and in Bombyx mori larvae, and assessed multiplication following conjugation between Bacillus strains. The B. thuringiensis KT0 strain did not show preference for genetic exchange with the B. thuringiensis recipient strain over that with the B. cereus recipient strains. However, B. thuringiensis strains germinated and multiplied more efficiently than B. cereus strains in insect larvae and only B. thuringiensis maintained complete spore germination for at least 24 h in B. mori larvae. These findings show that there is no positive association between bacterial multiplication efficiency and conjugation ability in infected insects for the used strains.