The crystal structure of human angiogenin in complex with an antitumor neutralizing antibody

The murine monoclonal antibody 26-2F neutralizes the angiogenic and ribonucleolytic activities of human angiogenin (ANG) and is highly effective in preventing the establishment and metastatic dissemination of human tumors in athymic mice. Here we report a 2.0 A resolution crystal structure for the complex of ANG with the Fab fragment of 26-2F that reveals the detailed interactions between ANG and the complementarity-determining regions (CDRs) of the antibody. Surprisingly, Fab binding induces a dramatic conformational change in the cell binding region of ANG at the opposite end of the molecule from the combining site; crosslinking experiments indicate that this rearrangement also occurs in solution. The ANG-Fab complex structure should be invaluable for designing maximally humanized versions of 26-2F for potential clinical use.     

Laboratory information management system for membrane protein structure initiative--from gene to crystal

Membrane Protein Structure Initiative (MPSI) exploits laboratory competencies to work collaboratively and distribute work among the different sites. This is possible as protein structure determination requires a series of steps, starting with target selection, through cloning, expression, purification, crystallization and finally structure determination. Distributed sites create a unique set of challenges for integrating and passing on information on the progress of targets. This role is played by the Protein Information Management System (PIMS), which is a laboratory information management system (LIMS), serving as a hub for MPSI, allowing collaborative structural proteomics to be carried out in a distributed fashion. It holds key information on the progress of cloning, expression, purification and crystallization of proteins. PIMS is employed to track the status of protein targets and to manage constructs, primers, experiments, protocols, sample locations and their detailed histories: thus playing a key role in MPSI data exchange. It also serves as the centre of a federation of interoperable information resources such as local laboratory information systems and international archival resources, like PDB or NCBI. During the challenging task of PIMS integration, within the MPSI, we discovered a number of prerequisites for successful PIMS integration. In this article we share our experiences and provide invaluable insights into the process of LIMS adaptation. This information should be of interest to partners who are thinking about using LIMS as a data centre for their collaborative efforts.     

Non-canonical base pairs and higher order structures in nucleic acids: crystal structure database analysis

Non-canonical base pairs, mostly present in the RNA, often play a prominent role towards maintaining their structural diversity. Higher order structures like base triples are also important in defining and stabilizing the tertiary folded structure of RNA. We have developed a new program BPFIND to analyze different types of canonical and non-canonical base pairs and base triples involving at least two direct hydrogen bonds formed between polar atoms of the bases or sugar O2' only. We considered 104 possible types of base pairs, out of which examples of 87 base pair types are found to occur in the available RNA crystal structures. Analysis indicates that approximately 32.7% base pairs in the functional RNA structures are non-canonical, which include different types of GA and GU Wobble base pairs apart from a wide range of base pair possibilities. We further noticed that more than 10.4% of these base pairs are involved in triplet formation, most of which play important role in maintaining long-range tertiary contacts in the three-dimensional folded structure of RNA. Apart from detection, the program also gives a quantitative estimate of the conformational deformation of detected base pairs in comparison to an ideal planar base pair. This helps us to gain insight into the extent of their structural variations and thus assists in understanding their specific role towards structural and functional diversity.     

WiGID: wireless genome information database

WiGID, wireless genome information database, is a new application for mobile internet and can be reached through wireless application protocol (WAP). The main purpose of WiGID is to give easy access to information on completely sequenced genomes. Genome entries in WiGID can be queried by the number of open reading frames (ORFs), genus and species name and year published. Initial search results are linked to information on the full entry. AVAILABILITY: WiGID can be accessed through WAP at http://wigid.cgb.ki.se/index.wml and through the regular internet at http://wigid.cgb.ki.se.     

A structure-based database of antibody variable domain diversity

The diversity of natural antibodies is limited by the genetic mechanisms that engender diversity and the functional requirements of antigen binding. Using an in vitro-evolved autonomous heavy chain variable domain (V(H)H-RIG), we have investigated the limits of structurally-tolerated diversity in the three complementarity-determining regions and a fourth loop within the third framework region. We determined the X-ray crystal structure of the V(H)H-RIG domain at 1.9A resolution and used it to guide the design of phage-displayed libraries encompassing the four loops. The libraries were subjected to selections for structural stability, and a database of structurally-tolerated sequences was compiled from the sequences of approximately 1000 unique clones. The results reveal that all four loops accommodate significantly greater diversity than is observed in nature. Thus, it appears that most sequence biases in the natural immune repertoire arise from factors other than structural constraints and, consequently, it should be possible to enhance the functions of antibodies significantly through in vitro evolution.     

An anti-urokinase plasminogen activator receptor (uPAR) antibody: crystal structure and binding epitope

Human urokinase-type plasminogen activator receptor (uPAR/CD87) is expressed at the invasive interface of the tumor-stromal microenvironment in many human cancers and interacts with a wide array of extracellular molecules. An anti-uPAR antibody (ATN615) was prepared using hybridoma technology. This antibody binds to uPAR in vitro with high affinity (K(d) approximately 1 nM) and does not interfere with uPA binding to uPAR. Here we report the crystal structure of the Fab fragment of ATN615 at 1.77 A and the analysis of ATN615-suPAR-ATF structure that was previously determined, emphasizing the ATN615-suPAR interaction. The complementarity determining regions (CDRs) of ATN615 consist of a high percentage of aromatic residues, and form a relatively flat and undulating surface. The ATN615 Fab fragment recognizes domain 3 of suPAR. The antibody-antigen recognition involves 11 suPAR residues and 12 Fab residues from five CDRs. Structural data suggest that Pro188, Asn190, Gly191, and Arg192 residues of uPAR are the key residues for the antibody recognition, while Pro189 and Arg192 render specificity of ATN615 for human uPAR. Interestingly, this antibody-antigen interface has a small contact area, mainly polar interaction with little hydrophobic character, yet has high binding strength. Furthermore, several solvent molecules (assigned as polyethylene glycols) were clearly visible in the binding interface between antibody and antigen, suggesting that solvent molecules may be important for the maximal binding between suPAR and ATN615 Fab. ATN615 undergoes small but noticeable changes in its CDR region upon antigen binding.     

Exhaustive crystal structure search and crystal modeling of beta-chitin

An exhaustive search of the crystal structure of beta-chitin was carried out by simultaneously optimizing all the structural parameters based on published X-ray diffraction data and stereochemical criteria. The most probable structure was characterized by a parallel-up chain polarity, a gg orientation of hydroxymethyl groups and an intermolecular hydrogen bond along the a-axis, which essentially reproduced the original structure proposed by Gardner and Blackwell. The proposed crystal structure was subsequently subjected to crystal modeling using the AMBER force field. The probable orientation of hydroxyl groups and their motional behaviors is proposed based on calculations for the crystal models identified. Solvated crystal models exhibited a slightly deformed structure with the formation of appreciable numbers of hydrogen bonds along the b-axis.     

Amine free crystal structure: the crystal structure of d(CGCGCG)2 and methylamine complex crystal

We succeeded in the crystallization of d(CGCGCG)2 and methylamine Complex. The crystal was clear and of sufficient size to collect the X-ray crystallographic data up to 1.0 A resolution using synchrotron radiation. As a result of X-ray crystallographic analysis of 2Fo-Fc map was much clear and easily traced. It is the first time monoamine co-crystallizes with d(CGCGCG)2. However, methylamine was not found from the complex crystal of d(CGCGCG)2 and methylamine. Five Mg ions were found around d(CGCGCG)2 molecules. These Mg ions neutralized the anion of 10 values of the phosphate group of DNA with five Mg2+. DNA stabilized only by a metallic ion and there is no example of analyzing the X-ray crystal structure like this. Mg ion stabilizes the conformation of Z-DNA. To use monoamine for crystallization of DNA, we found that we can get only d(CGCGCG)2 and Mg cation crystal. Only Mg cation can stabilize the conformation of Z-DNA. The method of using the monoamine for the crystallization of DNA can be applied to the crystallization of DNA of long chain of length in the future like this.     

The crystal structure of L-chiro-inositol

The crystal structure of L-chiro-inositol is monoclinic, P21, with a = 6.867(3), b = 9.133(4), c = 6.217(3) A, beta = 106.59(4) degrees, Z = 2. The structure was solved by using MULTAN, and refined to R = 0.028 for 1065 intensities observed with Ni-filtered MoK alpha radiation. The molecule has the expected chair conformation, with puckering parameters Q = 0.561 A, theta = 4.4 degrees, phi = 51.2 degrees. The non-hydrogen molecular symmetry is close to C2, with deviations of less than 0.07 A from a weighted fit. The intramolecular hydrogen-bonding forms infinite chains which are cross-linked through the weaker component of a three-center bond. The C-C bond lengths range from 1.515 to 1.528 A, and the C-O bond lengths from 1.418 to 1.436 A. The C-C-C angles range from 109.7 to 113.1 degrees, and the C-C-O angles from 106.5 to 112.0 degrees.     

The MEROPS database as a protease information system

Peptidases (often termed proteases) are of great relevance to biology, medicine, and biotechnology. This practical importance creates a need for an integrated source of information about peptidases. In the MEROPS database (www.merops.ac.uk), peptidases are classified by structural similarities in the parts of the molecules responsible for their enzymatic activity. They are grouped into families on the basis of amino acid sequence homology, and the families are assembled into clans in light of evidence that they share common ancestry. The evidence for clan-level relationships usually comes from similarities in tertiary structure, but we suggest that secondary structure profiles may also be useful in the future. The classification forms a framework around which a wealth of supplementary information about the peptidases is organized. This includes images of three-dimensional structures, alignments of matching human and mouse ESTs, comments on biomedical relevance, human and other gene symbols, and literature references linked to PubMed. For each family, there is an amino acid sequence alignment and a dendrogram. There is a list of all peptidases known from each of over 1000 species, together with summary data for the distributions of the families and clans throughout the major groups of organisms. A set of online searches provides access to information about the location of peptidases on human chromosomes and peptidase substrate specificity.     

CytReD: A database collecting human cytokinome information

The cytokines/related receptors system represents a complex regulatory network that is involved in those chronic inflammatory processes which lead to many diseases as cancers. We developed a Cytokine Receptor Database (CytReD) to collect information on cytokine receptors related to their biological activity, gene data, protein structures and diseases in which these and their ligands are implicated. This large set of information may be used by researchers as well as by physicians or clinicians to identify which cytokines, reported in the literature, are important in a given disease and, therefore, useful for purposes of diagnosis or prognostic. AVAILABILITY: The database is available for free at http://www.cro-m.eu/CytReD/     

Serpin crystal structure and serpin polymer structure

Serpins are a family of structurally homologous proteins having metastable native structures. As a result, a serpin variant destabilized by mutation(s) has a tendency to undergo conformational changes leading to inactive forms, e.g., the latent form and polymer. Serpin polymers are involved in a number of conformational diseases. Although several models for polymer structure have been proposed, the actual structure remains unknown. Here, we provide a comprehensive list of serpins, both free and in complexes, deposited in the Protein Data Bank. Our discussion focuses on structures that potentially can contribute to a better understanding of polymer structure.     

ADAMIS: a database for medical information systems

This paper describes the design and implementation of ADAMIS ('A database for medical information systems'). ADAMIS is a relational database management system for a general hospital environment. Apart from the usual database (DB) facilities of data definition and data manipulation, ADAMIS supports a query language called the 'simplified medical query language' (SMQL) which is completely end-user oriented and highly non-procedural. Other features of ADAMIS include provision of facilities for statistics collection and report generation. ADAMIS also provides adequate security and integrity features and has been designed mainly for use on interactive terminals.     

An online database for genome information of agricultural plants

The integration-based genome database provides useful information through a user-friendly web interface that allows analysis of comparative genome for agricultural plants. We have concentrated on the functional bioinformatics of major agricultural resources, such as rice, Chinese cabbage, rice mutant lines, and microorganisms. The major functions are focused on functional genome analysis, including genome projects, gene expression analysis, gene markers with genetic map, analysis tools for comparative genome structure, and genome annotation in agricultural plants.

Availability

The database is available for free at http://nabic.naas.go.kr/