A real-time QCM-D approach to monitoring mammalian DNA damage using DNA adsorbed to a polyelectrolyte surface

We have successfully demonstrated that the quartz crystal microbalance with dissipation monitoring (QCM-D) can be used to monitor real-time damage to genomic mammalian DNA adsorbed to a polyelectrolyte surface. To reveal the capabilities of this technique, we exposed DNA surfaces to quercetin, an agent that has been implicated in causing DNA strand breaks in a Cu(II)-dependent fashion in vitro. We show that the QCM-D frequency and dissipation patterns that result from exposure of the DNA surfaces to quercetin-Cu(II) are consistent with the induction of DNA strand scission. We use QCM-D to furthermore demonstrate that this process is dependent on Cu(II) and that the DNA damage induced by quercetin can still be detected if Cu(II) is in situ with the DNA surface and not in solution phase.     

Quartz crystal microbalance studies of multilayer glucagon fibrillation at the solid-liquid interface

We have used a quartz crystal microbalance with dissipation (QCM-D) to monitor the changes in layer thickness and viscoelastic properties accompanying multilayer amyloid deposition in situ for the first time. By means of atomic force microscope imaging, an unequivocal correlation is established between the interfacial nucleation and growth of glucagon fibrils and the QCM-D response. The combination of the two techniques allows us to study the temporal evolution of the interfacial fibrillation process. We have modeled the QCM-D data using an extension to the Kelvin-Voigt viscoelastic model. Three phases were observed in the fibrillation process: 1), a rigid multilayer of glucagon monomers forms and slowly rearranges; 2), this multilayer subsequently evolves into a dramatically more viscoelastic layer, containing a polymorphic network of micrometer-long fibrils growing from multiple nucleation sites; and 3), the fibrillar formation effectively stops as a result of the depletion of bulk-phase monomers, although the process can be continued without a lag phase by subsequent addition of fresh monomers. The robustness of the QCM-D technique, consolidated by complementary atomic force microscope studies, should make it possible to combine different components thought to be involved in the plaque formation process and thus build up realistic models of amyloid plaque formation in vitro.     

Dissipation monitoring for assessing EGF-induced changes of cell adhesion

Epidermal growth factor (EGF)-induced cell de-adhesion has been implicated as a critical step of normal embryonic development, wound repair, inflammatory response, and tumor cell metastasis. Like many other cellular processes, this cell de-adhesion exhibits a complex, time-dependent pattern. A comprehensive understanding of this process requires a quantitative, real-time assessment of cell-substrate interactions at the molecular level. We employed the quartz crystal microbalance with dissipation monitoring (QCM-D) to successfully track the EGF-induced changes in energy dissipation factor, ΔD, of a monolayer of MCF10A cells in real time. This time-dependent ΔD response correlates well both qualitatively and quantitatively with sequential events of a rapid disassembly, transition, and slow reassembly of focal adhesions of the cells in response to EGF exposure. Based on this strong correlation, we utilized the QCM-D to demonstrate that this dynamic focal-adhesion restructuring is regulated temporally by the downstream pathways of EGFR signaling such as the PI3K, MAPK/ERK, and PLC pathways. Because the QCM-D is a noninvasive technique, this novel approach potentially has a broad range of applications in the fundamental study of cellular processes, such as cell signaling and trafficking and mechanotransduction, and holds promise for drug and biomarker screening.     

Enzymatic cross-linking of a phenolic polymer extracted from the marine alga Fucus serratus

We have shown that a phenolic polymer (PP) extracted from Fucus serratus can be cross-linked using a vanadium-dependent bromoperoxidase (BPO). The methanol extracted PP was adsorbed to a quartz crystal sensor and the cross-linking was initiated by the addition of BPO, KBr, and H2O2. The decreased dissipation upon addition of the cross-linking agents, as measured with the quartz crystal microbalance with dissipation monitoring (QCM-D) method, was interpreted as intramolecular cross-links were formed between different phloroglucinol units in the PP. With surface plasmon resonance, it was shown that no desorption occurred from the sensor surface during the cross-linking. UV/vis spectroscopy verified the results achieved with QCM-D that all components, i.e., BPO, KBr, and H2O2, were necessary in order to achieve intramolecular oxidative cross-linking of the polymer.     

Comparison of surface plasmon resonance and quartz crystal microbalance in the study of whole blood and plasma coagulation

The coagulation of blood plasma and whole blood was studied with a surface plasmon resonance (SPR) based device and a quartz crystal microbalance instrument with energy dissipation detection (QCM-D). The SPR and QCM-D response signals were similar in shape but differing in time scales, reflecting differences in detection mechanisms. The QCM-D response time was longer than SPR, as a physical coupling of the sample to the substrate is required for molecules to be detected by the QCM-method. Change of sample properties within the evanescent field is sufficient for detection with SPR. Both the SPR signals and the QCM-D frequency and dissipation shifts showed dependency on concentrations of coagulation activator and sensitivity to heparin additions. The ratio of dissipation to frequency shifts, commonly considered to reflect viscoelastic properties of the sample, varied with the concentration of activator in blood plasma but not in whole blood. Additions of heparin to the thromboplastin activated whole blood sample, however, made the ratio variation reoccur. Implications of these observations for the understanding of the blood coagulation processes as well as the potential of the two methods in the clinic and in research are discussed.     

Characterization and expression kinetics of an endothelial cell activation antigen present in vivo only in acute inflammatory tissues

Endothelial cell activation by endotoxin (LPS), tumor necrosis factor (TNF), Interleukin-1-alpha, beta (IL-1-alpha, beta) and phorbolesters (TPA) results in increased monocyte adhesion. Examination of kinetics of monocyte adhesion shows that the onset of adherence enhancement (AE) is similar in all five agents (about 300% AE at 6 h), while its decrease is delayed in LPS/TNF versus IL-1-alpha, beta/TPA-induced activation (LPS versus IL-1-beta:260% versus 60% at 18 h). Monoclonal antibody (4D10), raised against 24 h LPS-stimulated endothelial cells detects an endothelial cell-specific activation antigen at Mr 81,000 that is induced by LPS, TNF, IL-1-alpha, beta and TPA (within 6 h about 100% positive cells). Decrease in antigen-positive cells is delayed in LPS/TNF versus IL-1-alpha, beta/TPA-induced antigen expression (LPS vs. IL-1-beta: 60% vs. 5% at 24 h). In situ the antigen is not expressed in normal and chronic inflammatory tissues. Acute inflammatory tissues, including contact and atopic dermatitis, psoriasis and periodontitis, however, show endothelial cells staining strongly positive. In contact eczemas at different times after elicitation (0, 6, 24, 72, 96 h), expression of the antigen is first seen after 24 h and is still strong at 96 h. These data indicate that LPS/TNF conduct an endothelial cell activation program in vitro, showing the same prolonged kinetics that is found for endothelial cell activation in the acute inflammatory process in vivo.     

Mapping candidate genes for Drosophila melanogaster resistance to the parasitoid wasp Leptopilina boulardi

Drosophila melanogaster resistance against the parasitoid wasp Leptopilina boulardi is under the control of a single gene (Rlb), with two alleles, the resistant one being dominant. Using strains bearing deletions, we previously demonstrated that the 55E2-E6; 55F3 region on chromosome 2R is involved in the resistance phenomenon. In this paper, we first restricted the Rlb containing region by mapping at the molecular level the breakpoints of the Df(2R)Pc66, Df(2R)P34 and Df(2R)Pc4 deficiencies, using both chromosomal in situ hybridization and Southern analyses. The resistance gene was localized in a 100 kb fragment, predicted to contain about 10 different genes. Male recombination genetic experiments were then performed, leading to identification of two possible candidates for the Rlb gene. Potential involvement of one of this genes, edl/mae, is discussed.     

Three-dimensional imaging and quantification of real-time cytosolic calcium oscillations in microglial cells cultured on electrospun matrices using laser scanning confocal microscopy

The development of a minimally invasive, robust, and inexpensive technique that permits real-time monitoring of cell responses on biomaterial scaffolds can improve the eventual outcomes of scaffold-based tissue engineering strategies. Towards establishing correlations between in situ biological activity and cell fate, we have developed a comprehensive workflow for real-time volumetric imaging of spatiotemporally varying cytosolic calcium oscillations in pure microglial cells cultured on electrospun meshes. Live HMC3 cells on randomly oriented electrospun fibers were stained with a fluorescent dye and imaged using a laser scanning confocal microscope. Resonance scanning provided high-resolution in obtaining the time-course of intracellular calcium levels without compromising spatial and temporal resolution. Three-dimensional reconstruction and depth-coding enabled the visualization of cell location and intracellular calcium levels as a function of sample thickness. Importantly, changes in cell morphology and in situ calcium spiking were quantified in response to a soluble biochemical cue and varying matrix architectures (i.e., randomly oriented and aligned fibers). Importantly, raster plots generated from spiking data revealed calcium signatures specific to culture conditions. In the future, our approach can be used to elucidate correlations between calcium signatures and cell phenotype/activation, and facilitate the rational design of scaffolds for biomedical applications.     

QCM-D fingerprinting of membrane-active peptides

The increasing prevalence of antibiotic-resistant bacteria is becoming a public health crisis. Antimicrobial peptides (AMPs) are a promising solution, because bacterial resistance is less likely. Quartz crystal microbalance with dissipation monitoring (QCM-D) is a versatile and valuable technique for investigation of these peptides. This article looks at the different approaches to the interpretation of QCM-D data, showing how to extract the maximum information from the data. Five AMPs of diverse charge, length and activity are used as case studies: caerin 1.1 wild-type, two caerin 1.1 mutants (Gly15Gly19-caerin 1.1 and Ala15Ala19-caerin 1.1), aurein 1.2 and oncocin. The interaction between the AMP and a 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) membrane is analysed inter alia using frequency–dissipation plots (∆f–∆D plots) to ascertain the mechanism of action of the AMP. The ∆f–∆D plot can then be used to provide a fingerprint for the AMP–membrane interaction. Building up a database of these fingerprints for all known AMPs will enable the relationship between AMP structure and membrane activity to be better understood, hopefully leading to the future development of antibiotics without bacterial resistance.     

Characterization of QCM sensor surfaces coated with molecularly imprinted nanoparticles

Molecularly imprinted polymers (MIPs) are gaining great interest as tailor-made recognition materials for the development of biomimetic sensors. Various approaches have been adopted to interface MIPs with different transducers, including the use of pre-made imprinted particles and the in situ preparation of thin polymer layers directly on transducer surfaces. In this work we functionalized quartz crystal microbalance (QCM) sensor crystals by coating the sensing surfaces with pre-made molecularly imprinted nanoparticles. The nanoparticles were immobilized on the QCM transducers by physical entrapment in a thin poly(ethylene terephthalate) (PET) layer that was spin-coated on the transducer surface. By controlling the deposition conditions, it was possible to gain a high nanoparticle loading in a stable PET layer, allowing the recognition sites in nanoparticles to be easily accessed by the test analytes. In this work, different sensor surfaces were studied by micro-profilometry and atomic force microscopy and the functionality was evaluated using quartz crystal microbalance with dissipation (QCM-D). The molecular recognition capability of the sensors were also confirmed using radioligand binding analysis by testing their response to the presence of the test compounds, (R)- and (S)-propranolol in aqueous buffer.     

Characterization of mechanical behavior of an epithelial monolayer in response to epidermal growth factor stimulation

Cell signaling often causes changes in cellular mechanical properties. Knowledge of such changes can ultimately lead to insight into the complex network of cell signaling. In the current study, we employed a combination of atomic force microscopy (AFM) and quartz crystal microbalance with dissipation monitoring (QCM-D) to characterize the mechanical behavior of A431 cells in response to epidermal growth factor receptor (EGFR) signaling. From AFM, which probes the upper portion of an individual cell in a monolayer of cells, we observed increases in energy dissipation, Young's modulus, and hysteresivity. Increases in hysteresivity imply a shift toward a more fluid-like mechanical ordering state in the bodies of the cells. From QCM-D, which probes the basal area of the monolayer of cells collectively, we observed decreases in energy dissipation factor. This result suggests a shift toward a more solid-like state in the basal areas of the cells. The comparative analysis of these results indicates a regionally specific mechanical behavior of the cell in response to EGFR signaling and suggests a correlation between the time-dependent mechanical responses and the dynamic process of EGFR signaling. This study also demonstrates that a combination of AFM and QCM-D is able to provide a more complete and refined mechanical profile of the cells during cell signaling.     

Non-Invasive Acoustical sensing of Drug-Induced Effects on the Contractile Machinery of Human Cardiomyocyte Clusters

There is an urgent need for improved models for cardiotoxicity testing. Here we propose acoustic sensing applied to beating human cardiomyocyte clusters for non-invasive, surrogate measuring of the QT interval and other characteristics of the contractile machinery. In experiments with the acoustic method quartz crystal microbalance with dissipation monitoring (QCM-D), the shape of the recorded signals was very similar to the extracellular field potential detected in electrochemical experiments, and the expected changes of the QT interval in response to addition of conventional drugs (E-4031 or nifedipine) were observed. Additionally, changes in the dissipation signal upon addition of cytochalasin D were in good agreement with the known, corresponding shortening of the contraction-relaxation time. These findings suggest that QCM-D has great potential as a tool for cardiotoxicological screening, where effects of compounds on the cardiomyocyte contractile machinery can be detected independently of whether the extracellular field potential is altered or not.     

Real-time investigation of mannosyltransferase function of a Xylella fastidiosa recombinant GumH protein using QCM-D

Xylella fastidiosa is a gram-negative bacterium that causes serious diseases in economically important crops, including grapevine, coffee, and citrus fruits. X. fastidiosa colonizes the xylem vessels of the infected plants, thereby blocking water and nutrient transport. The genome sequence of X. fastidiosa has revealed an operon containing nine genes possibly involved in the synthesis of an exopolisaccharide (EPS) named fastidian gum that can be related with the pathogenicity of this bacterium. The α-1,3-mannosyltransferase (GumH) enzyme from X. fastidiosa is involved in fastidian gum production. GumH is responsible for the transfer of mannose from guanosine diphosphate mannose (GDP-man) to the cellobiose–pyrophosphate–polyprenol carrier lipid (CPP-Lip) during the assembly and biosynthesis of EPS. In this work, a method for real-time detection of recombinant GumH enzymatic activity was successfully developed using a Quartz Crystal Microbalance with dissipation monitoring (QCM-D). The QCM-D transducer was strategically modified with CPP-Lip by using a solid-supported lipid bilayer that makes use of a self-assembled monolayer of 1-undecanethiol. Monitoring the real-time CPP-Lip QCM-D transducer in the presence of GDP-man and GumH enzyme shows a mass increase, indicating the transfer of mannose. The real-time QCM-D determination of mannosyltransferase function was validated by a High Performance Liquid Chromatography (LC) method developed for determination of GDP produced by enzymatic reaction. LC results confirmed the activity of recombinant GumH protein, which is the first enzyme involved in the biosynthesis of the EPS from X. fastidiosa enzymatically characterized.     

Quartz Crystal Microbalance with Dissipation Monitoring: Enabling Real-Time Characterization of Biological Materials and Their Interactions

In recent years, there has been a rapid growth in the number of scientific reports in which the quartz crystal microbalance (QCM) technique has played a key role in elucidating various aspects of biological materials and their interactions. This article illustrates some key advances in the development of a special variation of this technique called quartz crystal microbalance with dissipation monitoring (QCM-D). The main feature and advantage of QCM-D, compared with the conventional QCM, is that it in addition to measuring changes in resonant frequency (Δf), a simultaneous parameter related to the energy loss or dissipation (ΔD) of the system is also measured. Δf essentially measures changes in the mass attached to the sensor surface, while ΔD measures properties related to the viscoelastic properties of the adlayer. Thus, QCM-D measures two totally independent properties of the adlayer. The focus of this review is an overview of the QCM-D technology and highlights of recent applications. Specifically, recent applications dealing with DNA, proteins, lipids, and cells will be detailed. This is not intended as a comprehensive review of all possible applications of the QCM-D technology, but rather a glimpse into a few highlighted application areas in the biomolecular field that were published in 2007.     

Fate of the biological control agent Pseudomonas aureofaciens TX-1 after application to turfgrass

The fate and impact of Pseudomonas aureofaciens TX-1 following application as a biocontrol agent for fungi in turfgrass were studied. The organism was applied with a modified irrigation system by using a preparation containing 1 x 10(6) P. aureofaciens TX-1 CFU ml(-1) about 100 times between May and August. We examined the impact of this repeated introduction of P. aureofaciens TX-1 (which is known to produce the antimicrobial compound phenazine-1-carboxylic acid) on the indigenous microbial community of the turfgrass system and on establishment of introduced bacteria in the soil system. A PCR primer-DNA hybridization probe combination was developed to accurately monitor the fate of P. aureofaciens TX-1 following application in irrigation water. To assess the impact of frequent P. aureofaciens TX-1 applications on the indigenous bacterial community, turfgrass canopy, thatch, and rhizosphere samples were obtained during the growing season from control and treated plots and subjected to DNA extraction procedures and denaturing gradient gel electrophoresis (DGGE). PCR amplification and hybridization of extracted DNA with the P. aureofaciens TX-1-specific primer-probe combination revealed that P. aureofaciens TX-1 not only became established in the rhizosphere and thatch but also was capable of overwintering. Separation of PCR-amplified partial 16S rRNA genes by DGGE showed that the repeated application of P. aureofaciens TX-1 in irrigation water resulted in transient displacement of a leaf surface bacterial community member. There was no obvious alteration of any dominant members of the thatch and rhizosphere microbial communities.     

Viscoelasticity of Thin Biomolecular Films: A Case Study on Nucleoporin Phenylalanine-Glycine Repeats Grafted to a Histidine-Tag Capturing QCM-D Sensor

Immobilization of proteins onto surfaces is useful for the controlled generation of biomolecular assemblies that can be readily characterized with in situ label-free surface-sensitive techniques. Here we analyze the performance of a quartz crystal microbalance with dissipation monitoring (QCM-D) sensor surface that enables the selective and oriented immobilization of histidine-tagged molecules for morphological and interaction studies. More specifically, we characterize monolayers of natively unfolded nucleoporin domains that are rich in phenylalanine-glycine repeats (FGRDs). An FGRD meshwork is thought to be responsible for the selectivity of macromolecular transport across the nuclear pore complex between the cytosol and the nucleus of living cells. We demonstrate that nucleoporin FGRD films can be formed on His-tag Capturing Sensors with properties comparable to a previously reported immobilization platform based on supported lipid bilayers (SLB). Approaches to extract the film thickness and viscoelastic properties in a time-resolved manner from the QCM-D response are described, with particular emphasis on the practical implementation of viscoelastic modeling and a detailed analysis of the quality and reliability of the fit. By comparing the results with theoretical predictions for the viscoelastic properties of polymer solutions and gels, and experimental data from an atomic force microscopy indentation assay, we demonstrate that detailed analysis can provide novel insight into the morphology and dynamics of FG repeat domain films. The immobilization approach is simple and versatile, and can be easily extended to other His-tagged biomolecules. The data analysis procedure should be useful for the characterization of other ultrathin biomolecular and polymer films.     

Antibody-antigenic peptide interactions monitored by SPR and QCM-D. A model for SPR detection of IA-2 autoantibodies in human serum

This work reports on a complementary use of surface plasmon resonance (SPR) and quartz crystal microbalance with dissipation monitoring (QCM-D) technologies to study interactions between a peptide antigen and polyclonal antibodies, in an experimental format suitable for diagnostic assays of autoimmune diseases. In the chosen model, a synthetic peptide from the juxtamembrane region of IA-2 (a type 1 diabetes associated antigen) was immobilized by an optimized chemical protocol applicable to both BIACORE and QCM-D sensors. A thorough study of the peptide immobilization was performed to optimize the signal-to-noise ratio using mixed self-assembled monolayers (SAM) on a gold surface. Introduction of polyethylene glycol (EG₆) chains into mixed SAM layers and addition of an anionic surfactant to the human serum reduced non-specific binding without modifying the viscoelasticity properties of the layer. Under our conditions, the antibody SPR detection limit was determined to be 0.2 nM in diluted human serum. This value is in agreement with the reported rank distribution of IA-2 antibodies in diabetic patient sera. Label-free and real-time technologies such as SPR and/or QCM-D could be precious tools in future diagnostic assays.     

Association of influenza virus NP and M1 proteins with cellular cytoskeletal elements in influenza virus-infected cells.

We have investigated the association of the influenza virus matrix (M1) and nucleoprotein (NP) with the host cell cytoskeletal elements in influenza virus-infected MDCK and MDBK cells. At 6.5 h postinfection, the newly synthesized M1 was Triton X-100 (TX-100) extractable but became resistant to TX-100 extraction during the chase with a t1/2 of 20 min. NP, on the other hand, acquired TX-100 resistance immediately after synthesis. Significant fractions of both M1 and NP remained resistant to differential detergent (Triton X-114, 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate [CHAPS], octylglucoside) extraction, suggesting that M1 and NP were interacting with the cytoskeletal elements. However, the high-molecular-weight form of the viral transmembrane protein hemagglutinin (HA), which had undergone complex glycosylation, also became resistant to TX-100 extraction but was sensitive to octylglucoside detergent extraction, indicating that HA, unlike M1 or NP, was interacting with TX-100-insoluble lipids and not with cytoskeletal elements. Morphological analysis with cytoskeletal disrupting agents demonstrated that M1 and NP were associated with microfilaments in virus-infected cells. However, M1, expressed alone in MDCK or HeLa cells from cloned cDNA or coexpressed with NP, did not become resistant to TX-100 extraction even after a long chase. NP, on the other hand, became TX-100 insoluble as in the virus-infected cells. M1 also did not acquire TX-100 insolubility in ts 56 (a temperature-sensitive mutant with a defect in NP protein)-infected cells at the nonpermissive temperature. Furthermore, early in the infectious cycle in WSN-infected cells, M1 acquired TX-100 resistance very slowly after a long chase and did not acquire TX-100 resistance at all when chased in the presence of cycloheximide. On the other hand, late in the infectious cycle, M1 acquired TX-100 resistance when chased in either the presence or absence of cycloheximide. Taken together, these results demonstrate that M1 and NP interact with host microfilaments in virus-infected cells and that M1 requires other viral proteins or subviral components (possibly viral ribonucleoprotein) for interaction with host cytoskeletal components. The implication of these results for viral morphogenesis is discussed.     

Hierarchical gene expression profiles of HUVEC stimulated by different lipid A structures obtained from Porphyromonas gingivalis and Escherichia coli

The ability of lipid A structural variants to elicit unique endothelial cell gene expression was examined by measuring global gene expression profiles in human umbilical cord vein endothelial cells (HUVEC) using Affymetrix full genome chips. Two lipid A structural variants obtained from Porphyromonas gingivalis designated PgLPS(1435/1449) and PgLPS(1690) as well as LPS obtained from Escherichia coli wild type and an E. coli msbB mutant (missing myristic acid in the lipid A) were examined. Each of these lipid A structures has been shown to interact with TLR4; however, PgLPS(1435/1449) and E. coli msbB LPS have been shown to be TLR4 antagonists while PgLPS(1690) and wild-type E. coli LPS are TLR4 agonists. It was found that PgLPS(1435/1449) and PgLPS(1690) as well as E. coli msbB LPS activated a subset of those genes significantly transcribed in response to E. coli wild-type LPS. Furthermore, the subset of genes expressed in response to the different lipid A structural forms were those most significantly activated by wild-type E. coli LPS demonstrating a hierarchy in TLR4-dependent endothelial cell gene activation. A unique gene expression profile for the weak TLR4 agonist PgLPS(1690) was observed and represents a TLR4 hierarchy in endothelial cell gene activation.     

Quartz crystal microbalance-with dissipation monitoring (QCM-D) for real time measurements of blood coagulation density and immune complement activation on artificial surfaces

A recently developed variant of quartz crystal microbalance (QCM) called QCM-with dissipation monitoring (QCM-D) allows simultaneous and simple measurements of changes in adsorbed mass as well as the viscoelastic property (D-factor) of deposited protein layers on the sensor surface. We have taken the QCM-D technology a step further and demonstrated its advantages in the study of protein assembly as a consequence of surface induced immune complement activation, or contact activated blood coagulation. In the present study we have continued our QCM-D investigations of surface assembly of fibrin clot formation and complement activation and incubated differently modified quartz sensor surfaces in blood plasma and sera. Polymer surfaces used were spin-coated polyethylene, poly(ethylene terephtalate), poly(methylmetacrylate) and poly(dimethylsiloxane). Also used were sputtered titanium and heparin grafted surfaces. In this investigation we found that we could describe the surface induced coagulation with four independent parameters: (1) Time of onset of coagulation, (2) fibrin deposition rate, (3) total frequency shift at stable plateau, and (4) fibrin clot density. The most important finding was that the blood plasma clot density can be assessed with the use of D determinations and that the clot density varied significantly with the chemical composition of the surface. However, the D-factor did not give any new analytical information about the possible complement activation mechanisms. Nevertheless, the QCM-D was found to be a reliable tool for the analysis of surface induced complement activation. We also compared the QCM-D technique with traditional enzyme immuno assay (EIA) measurements of soluble products from the surface activation of the complement and coagulation systems. We found that the results from EIA and QCM-D measurements corresponded well for the complement activation but not for the coagulation, probably due to the biological complexity of the coagulation system.