Simultaneous determination of dopamine, ascorbic acid, and uric acid using carbon ionic liquid electrode

A recently constructed carbon composite electrode using room temperature ionic liquid as pasting binder was employed as a novel electrode for sensitive, simultaneous determination of dopamine (DA), ascorbic acid (AA), and uric acid (UA). The apparent reversibility and kinetics of the electrochemical reaction for DA, AA, and UA found were improved significantly compared to those obtained using a conventional carbon paste electrode. The results show that carbon ionic liquid electrode (CILE) reduces the overpotential of DA, AA, and UA oxidation, without showing any fouling effect due to the deposition of their oxidized products. In the case of DA, the oxidation and reduction peak potentials appear at 210 and 135mV (vs Ag/AgCl, KCl, 3.0M), respectively, and the CILE shows a significantly better reversibility for dopamine. The oxidation peak due to the oxidation of AA occurs at about 60mV. For UA, a sharp oxidation peak at 340mV and a small reduction peak at 250mV are obtained at CILE. Differential pulse voltammetry was used for the simultaneous determination of ternary mixtures of DA, AA, and UA. Relative standard deviation for DA, AA, and UA determinations were less than 3.0% and DA, AA, and UA can be determined in the ranges of 2.0x10(-6)-1.5x10(-3), 5.0x10(-5)-7.4x10(-3), and 2.0x10(-6)-2.2x10(-4)M, respectively. The method was applied to the determination of DA, AA, and UA in human blood serum and urine samples.     

Chemometric-assisted kinetic-spectrophotometric method for simultaneous determination of ascorbic acid, uric acid, and dopamine

A chemometric-assisted kinetic spectrophotometric method has been developed for simultaneous determination of ascorbic acid (AA), uric acid (UA), and dopamine (DA). This method relies on the difference in the kinetic rates of the reactions of analytes with a common oxidizing agent, tris(1,10-phenanthroline) and iron(III) complex (ferritin, [Fe(phen)₃]³⁺) at pH 4.4. The changes in absorbance were monitored spectrophotometrically. The data obtained from the experiments were processed by chemometric methods of artificial neural network (ANN) and partial least squares (PLS). Acceptable techniques of prediction set, randomization t test, cross-validation, and Y randomization were applied for the selection of the best chemometric method. The results showed that feedforward artificial neural network (FFANN) is more efficient than the other chemometric methods. The parameters affecting the experimental conditions were optimized, and it was found that under optimal conditions Beer’s law is followed in the concentration ranges of 4.3–74.1, 4.3–78.3, and 2.0–33.0 μM for AA, UA, and DA, respectively. The proposed method was successfully applied to the determination of analytes in serum and urine samples.     

Reactions and structures in the gallium(III)/indium(III)-N,N-dimethylthioformamide systems

The structure of the N,N-dimethylthioformamide (DMTF) solvated gallium(III) ion has been determined in solution by means of extended X-ray absorption fine structure (EXAFS) spectroscopy. The gallium(III) ion is four-coordinate in tetrahedral fashion with a mean Ga-S bond distance of 2.233(2) Å in DMTF solution. At the dissolution of indium(III) perchlorate or trifluoromethanesulfonate in DMTF coordinated solvent molecules are partly reduced to sulfide ions, and a tetrameric complex with the composition [In₄S₄(SHN(CH₃)₂)₁₂]⁴⁺ is formed. The structure of the solid tetrameric complex in the perchlorate salt was solved with single crystal X-ray diffraction. Four indium(III) ions and four sulfide ions form a highly symmetric heterocubane structure where each indium binds three bridging sulfide ions and each sulfide ion binds three indium(III) ions with a mean In-S bond distance of 2.584(1) Å, and S-In-S angles of 90.3(1)°. Each indium(III) additionally binds three DMTF molecules at significantly longer mean In-S bond distance, 2.703(1) Å; the S-In-S angles are in the range 80.3-90.4°. Large angle X-ray scattering data on a DMTF solution of indium(III) trifluoromethanesulfonate show that the same tetrameric species characterized in the solid state is also present in solution, whereas the EXAFS measurements only give information about the In-S bond distances due to the short core hole lifetime.     

Selective detection of uric acid in the presence of ascorbic acid at physiological pH by using a beta-cyclodextrin modified copolymer of sulfanilic acid and N-acetylaniline

A beta-cyclodextrin (CD) modified copolymer membrane of sulfanilic acid (p-ASA) and N-acetylaniline (SPNAANI) on glassy carbon electrode (GCE) was prepared and used to determine uric acid (UA) in the presence of a large excess of ascorbic acid (AA) by differential pulse voltammetry (DPV). The properties of the copolymer were characterized by X-ray photoelectron spectra (XPS) and Raman spectroscopy. The oxidation peaks of AA and UA were well separated at the composite membrane modified electrode in phosphate buffer solution (PBS, pH 7.4). A linear relationship between the peak current and the concentration of UA was obtained in the range from 1.0 x 10(-5) to 3.5 x 10(-4)mol L(-1), and the detection limit was 2.7 x 10(-6)mol L(-1) at a signal-to-noise ratio of 3. Two hundred and fifty-fold excess of AA did not interfere with the determination of UA. The application of the prepared electrode was demonstrated by measuring UA in human serum samples without any pretreatment, and the results were comparatively in agreement with the spectrometric clinical assay method.     

An electrochemical sensor based on single-stranded DNA-poly(sulfosalicylic acid) composite film for simultaneous determination of adenine, guanine, and thymine

Poly(sulfosalicylic acid) and single-stranded DNA composite (PSSA–ssDNA)-modified glassy carbon electrode (GCE) was prepared by electropolymerization and then successfully used to simultaneously determine adenine (A), guanine (G), and thymine (T). The characterization of electrochemically synthesized PSSA–ssDNA film was investigated by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The modified electrode exhibited enhanced electrocatalytic behavior and good stability for the simultaneous determination of A, G, and T in 0.1 M phosphate buffer solution (PBS, pH 7.0). Well-separated voltammetric peaks were obtained among A, G, and T presented in the analyte mixture. Under the optimal conditions, the peak currents for A, G, and T increased linearly with the increase of analyte mixture concentration in the ranges of 6.5 × 10⁻⁸ to 1.1 × 10⁻⁶, 6.5 × 10⁻⁸ to 1.1 × 10⁻⁶, and 4.1 × 10⁻⁶ to 2.7 × 10⁻⁵ M, respectively. The detection limits (signal/noise = 3) for A, G, and T were 2.2 × 10^–8, 2.2 × 10^–8, and 1.4 × 10^–6 M, respectively.     

Determination of dopamine in the presence of ascorbic acid using poly(3,5-dihydroxy benzoic acid) film modified electrode

A polymerized film of 3,5-dihydroxy benzoic acid (DBA) was prepared on the surface of a glassy carbon electrode (GCE) in neutral solution by cyclic voltammetry (CV). The poly(DBA) film-coated GCE exhibited excellent electrocatalytic activity toward the oxidation of dopamine (DA). A linear range of 1.0 × 10⁻⁷ to 1.0 × 10⁻⁴ M and a detection limit of 6.0 × 10⁻⁸ M were observed in pH 7.4 phosphate buffer solutions. Moreover, the interference of ascorbic acid (AA) was effectively eliminated. This work provides a simple and easy approach to selective detection of DA in the presence of AA.     

Blend miscibility of cellulose propionate with poly(N-vinyl pyrrolidone-co-methyl methacrylate)

The blend miscibility of cellulose propionate (CP) with poly(N-vinyl pyrrolidone-co-methyl methacrylate) (P(VP-co-MMA)) was investigated. The degree of substitution (DS) of CP used ranged from 1.6 to >2.9, and samples for the vinyl polymer component were prepared in a full range of VP:MMA compositions. Through DSC analysis and solid-state ¹³C NMR and FT-IR measurements, we revealed that CPs of DS < 2.7 were miscible with P(VP-co-MMA)s of VP ≥ ∼10 mol% on a scale within a few nanometers, in virtue of hydrogen-bonding interactions between CP-hydroxyls and VP-carbonyls. When the DS of CP exceeded 2.7, the miscibility was restricted to the polymer pairs using P(VP-co-MMA)s of VP = ca. 10–40 mol%; the scale of mixing in the blends concerned was somewhat larger (ca. 5–20 nm), however. The appearance of such a “miscibility window” was interpretable as an effect of intramolecular repulsion in the copolymer component. Results of DMA and birefringence measurements indicated that the miscible blending of CP with the vinyl polymer invited synergistic improvements in thermomechanical and optical properties of the respective constituent polymers. Additionally, it was found that the VP:MMA composition range corresponding to the miscibility window was expanded by modification of the CP component into cellulose acetate propionate.     

Enhancement of antibacterial effects of epigallocatechin gallate, using ascorbic acid

Although plant polyphenols such as (−)-epigallocatechin gallate (EGCG) have antibacterial activity towards methicillin-resistant Staphylococcus aureus (MRSA), such polyphenols are unstable in solution. Because the instability of polyphenols is attributable to their oxidation, we examined the effects of antioxidants and inhibitors of polyphenol oxidation on the maintenance of polyphenol antibacterial activity. The antibacterial activity of EGCG was enhanced in the presence of ascorbic acid, and ascorbic acid was the most effective for retaining the concentration of stable EGCG. On the other hand, the antibacterial activity of EGCG was lowered in the presence of casein in spite of its suppressing effect on the EGCG decrease. The effect of EGCG on the antibiotic resistance of MRSA was also enhanced in the presence of ascorbic acid. The addition of an antioxidant may affect other pharmacological effects of polyphenols in analogous ways, although this does not mean the clinical usefulness of the addition directly.     

A structural study of the hydrated and the dimethylsulfoxide, N,N′-dimethylpropyleneurea, and N,N-dimethylthioformamide solvated iron(II) and iron(III) ions in solution and solid state

The structures of the solvated iron(II) and iron(III) ions have been studied in solution and solid state by extended X-ray absorption fine structure (EXAFS) in three oxygen donor solvents, water, dimethylsulfoxide (Me₂SO), N,N′-dimethylpropyleneurea (DMPU), and one sulfur donor solvent, N,N-dimethylthioformamide (DMTF); these solvents have different coordination and solvation properties. In addition, the structure of hexakis(dimethylsulfoxide)iron(III) perchlorate has been determined crystallographically to support the determination of the corresponding solvate in solution. The hydrated, the dimethylsulfoxide and N,N-dimethylthioformamide solvated iron(II) ions show regular octahedral coordination in both solution and solid state with mean Fe-O, Fe-O, and Fe-S bond distances of 2.10, 2.10, and 2.52 Å, respectively, whereas the N,N′-dimethylpropyleneurea iron(II) solvate is five-coordinated, d(Fe-O) = 2.06 Å. The compounds vary in color from light green (hydrate) to dark orange or red (DMPU). The hydrated iron(III) ion in aqueous solution and the dimethylsulfoxide solvated iron(III) ions in solution and solid state show the expected octahedral coordination, the Fe-O bond distances are 2.00 Å for both, whereas the N,N′-dimethylpropyleneurea iron(III) solvate is found to be five-coordinated with a mean Fe-O bond distance of 1.99 Å. The N,N-dimethylthioformamide solvated iron(III) ion in the solid perchlorate salt is tetrahedrally four-coordinated, the mean Fe-S bond distance is 2.20 Å. Iron(III) is reduced with time to iron(II) in N,N-dimethylthioformamide solution. The compounds vary in color from pale yellow (hydrate) to blackish red (DMPU).     

Au-nanoclusters incorporated 3-amino-5-mercapto-1,2,4-triazole film modified electrode for the simultaneous determination of ascorbic acid, dopamine, uric acid and nitrite

A novel biosensor has been constructed by the electrodeposition of Au-nanoclusters (nano-Au) on poly(3-amino-5-mercapto-1,2,4-triazole) (p-TA) film modified glassy carbon electrode (GCE) and employed for the simultaneous determination of dopamine (DA), ascorbic acid (AA), uric acid (UA) and nitrite (NO₂⁻). NH₂ and SH groups exposed to the p-TA layer are helpful for the electrodeposition of nano-Au. The combination of nano-Au and p-TA endow the biosensor with large surface area, good biological compatibility, electricity and stability, high selectivity and sensitivity and flexible and controllable electrodeposition process. In the fourfold co-existence system, the linear calibration plots for AA, DA, UA and NO₂⁻ were obtained over the range of 2.1–50.1 μM, 0.6–340.0 μM, 1.6–110.0 μM and 15.9–277.0 μM with detection limits of 1.1 × 10⁻⁶ M, 5.0 × 10⁻⁸ M, 8.0 × 10⁻⁸ M and 8.9 × 10⁻⁷ M, respectively. In addition, the modified biosensor was applied to the determination of AA, DA, UA and NO₂⁻ in urine and serum samples by using standard adding method with satisfactory results.     

Synthesis and transition metal complexes of 3,3-bis(1-vinylimidazol-2-yl)propionic acid, a new N,N,O ligand suitable for copolymerisation

The new N,N,O heteroscorpionate ligand 3,3-bis(1-vinylimidazol-2-yl)propionic acid (Hbvip) (5) was synthesised in five steps starting from 1-vinylimidazole. This ligand is closely related to 3,3-bis(1-methylimidazol-2-yl)propionic acid (Hbmip), but contains two vinyl linker groups which can be used for radical-induced polymerisation reactions. The κ³-N,N,O coordination behaviour of 5 was proven by the synthesis of the tricarbonyl complexes [Re(bvip)(CO)₃] (6), [Mn(bvip)(CO)₃] (7) and [Cu(bvip)₂] (8). To obtain good yields of 6, it was synthesised in water instead of THF. The ligand as well as all three complexes were characterised by X-ray crystallography. Copolymerisation of 5 with pure methyl methacrylate (MMA) or a combination of MMA and ethylene glycol dimethacrylate (EGDMA) led to the solid phases P1 and P2. Polymer-bound rhenium and manganese tricarbonyl complexes could be obtained by the reaction of deprotonated P1 with [MBr(CO)₅] (M = Re, Mn) and also by copolymerisation of 6 and 7 with MMA. In both cases, the facial tripodal binding behaviour was evidenced by IR spectra of the polymers. Furthermore, the content of metal incorporated in the polymers was determined by elemental analysis, AAS or ICP-OES measurements. Reaction of the deprotonated solid phase P1 with copper(II) chloride led to a blue solid-phase (P1-Cu). The UV-Vis absorption maximum of P1-Cu is found at 615 nm, which is almost identical to that found for 8. Thereby, it seems likely that P1 is flexible enough to form bisligand complexes with copper(II). This means that the copper centres act as a kind of crosslinking agents. In contrast, the heterogeneous reaction of P2 with copper(II) chloride yielded a lime green solid phase (P2-Cu). The bathochromic shift of the absorption maximum by 102 nm suggests one-sided bound copper centres.     

First detection and quantification of N-monomethylarginine,a structural isomer of N-monomethylarginine,in humans using MS

The l-arginine metabolites methylated at the guanidino moiety, such as N^G-monomethyl-l-arginine (LNMMA), asymmetric N^G,N^G-dimethyl-l-arginine (ADMA), and symmetric N^G,N^G'-dimethyl-l-arginine (SDMA), are long known to be present in human plasma. Far less is known about the structural isomer of LNMMA, N^δ-monomethyl-l-arginine (δ-MMA). In prior work, it has been detected in yeast proteins, but it has not been investigated in mammalian plasma or cells. In this work, we present a method for the simultaneous and unambiguous quantification of LNMMA and δ-MMA in human plasma that is capable of detecting δ-MMA separately from LNMMA. The method comprises a simple protein precipitation sample preparation, hydrophilic interaction liquid chromatography (HILIC) gradient elution on an unmodified silica column, and triple stage mass spectrometric detection. Stable isotope-labeled D₆-SDMA was used as internal standard. The calibration ranges were 25–1000 nmol/L for LNMMA and 5–350 nmol/L for δ-MMA. The intra- and inter-batch precision determinations resulted in relative standard deviations of less than 12% for both compounds with accuracies of less than 6% deviation from the expected values. In a pilot study enrolling 10 healthy volunteers, mean concentrations of 48.0 ± 7.4 nmol/L for LNMMA and 27.4 ± 7.7 nmol/L for δ-MMA were found.     

Synthesis, structure and catalytic activity of low-spin dicyano iron(III) complexes of N,N-bis(quinolyl)malonamide derivatives

Two low-spin Fe(III) dicyano-dicarboxamido complexes have been prepared from N,N^′-bis(8-quinolyl)malonamide derivatives. Crystal structures show that the four nitrogen donors available to complex the metal are arranged in the equatorial plane with the two cyanides trans to each other in the axial positions when the malonyl moiety is disubstituted. In contrast, the unsubstituted malonyl results in only three nitrogens in the equatorial plane with the fourth in an apical position and the two cyanides occupying cis sites, one equatorial and the other axial. NMR analyses show that the solid state structure of both complexes is retained in solution. Both types of configurational complexes catalyze cyclic olefin oxidations with H₂O₂ but only the cis-dicyano complex catalyzes stilbene oxidation with formation of epoxides, diols and benzaldehyde.     

New antibody purification procedure using a thermally responsive poly(N-isopropylacrylamide)–dextran derivative conjugate

Through their specificity and affinity, antibodies are useful tools in research and medicine. In this study, we investigated a new type of chromatographic method using a thermosensitive polymer for the purification of antibodies against a dextran derivative (DD), as a model. The thermally reversible soluble–insoluble poly(N-isopropylacrylamide)–dextran derivative conjugate, named poly(NIPAAm)–DD, has been synthesized by conjugating amino-terminated poly(N-isopropylacrylamide) to a DD via ethyl-3-(3-dimethylaminopropyl)-carbodiimide. On one hand, this report describes the two steps of poly(NIPAAm)–DD conjugation and characterization. On the other hand, the poly(NIPAAm)–DD conjugate was used as a tool to purify polyclonal antibodies in serum samples from rabbits subcutaneously immunized with the derivatized dextran. Antibodies were purified and quantified by immunoenzymatic assays. Our results indicate that antibodies recognized both DD and poly(NIPAAm)–DD. In contrast, they did not bind to native poly(NIPAAm) or poly(NIPAAm) conjugated with another anionic dextran. We conclude that the conjugation of a polysaccharide to poly(NIPAAm) leads to an original and efficient chromatographic method to purify antibodies. Moreover, this novel method of purification is rapid, sensitive, inexpensive and could be used to purify various types of antibodies.     

Synthesis and coordination behaviors of 14-membered tetraaza macrocyclic copper(II) complexes bearing two N-propionic acid or N-propionic methyl ester groups

A di-N-functionalized 14-membered tetraaza macrocycle, [H₄L³](ClO₄)₂ (L³ = 1,8-bis(2-carboxyethyl)-3,5,7,7,10,12,14,14-octamethyl-1,4,8,11-tetraazacyclotetradecane), has been synthesized by acid hydrolysis of 1,8-bis(2-cyanoethyl)-3,5,7,7,10,12,14,14-octamethyl-1,4,8,11-tetraazacyclotetradecane (L²). The copper(II) complexes [CuL²](ClO₄)₂ and [Cu(H₂L³)](ClO₄)₂ were prepared and characterized. The complex [Cu(H₂L³)]²⁺ readily reacts with methanol to yield [CuL⁴]²⁺ (L⁴ = 1,8-bis(2-carbomethoxyethyl)-3,5,7,7,10,12,14,14-octamethyl-1,4,8,11-tetraazacyclotetradecane). The N-CH₂CH₂COOH groups of [Cu(H₂L³)](ClO₄)₂ are not coordinated to the metal ion in the solid state but are involved in coordination in various non-aqueous solvents or in aqueous solutions of pH ? 1.0. Interestingly, [CuL⁴](ClO₄)₂ exists as two stable structural isomers, 1 (the pendant ester groups are not involved in coordination) and 2 (one of the two ester groups is coordinated to the metal ion), in the solid state; the two isomers can be prepared selectively by controlling ionic strength of a methanol solution of the complex. Crystal structures and coordination behaviors of the two isomers are described. The di-N-cyanoethylated macrocyclic complex [CuL²](ClO₄)₂ is rapidly decomposed in 0.1 M NaOH solution even at room temperature. On the other hand, [Cu(H₂L³)](ClO₄)₂ and [CuL⁴](ClO₄)₂ are quite inert against decomposition under similar basic conditions. In acidic or basic aqueous solutions, [CuL⁴]²⁺ is hydrolyzed to [Cu(H₂L³)]²⁺ or [CuL³].     

Stereospecific ligands and their complexes. V. Synthesis, characterization and antimicrobial activity of palladium(II) complexes with some alkyl esters of (S,S)-ethylenediamine-N,N′-di-2-propanoic acid

Three new ligands and their palladium(II) complexes of general formula [PdCl₂(R₂-S,S-eddp)] (R = n-propyl, n-butyl and n-pentyl) have been synthesized and characterized by microanalysis, infrared and ¹H and ¹³C NMR spectroscopy. Antimicrobial activity of these ligands and complexes was tested by microdilution method and both minimal inhibitory and microbicidal concentration were determined. These tested complexes demonstrated the significant antifungal activity against pathogenic fungi Aspergillus flavus and Aspergillus fumigatus. On the other hand, these complexes demonstrated moderate antibacterial activity.     

A porous poly(acrylonitrile-co-acrylic acid) film-based glucose biosensor constructed by electrochemical entrapment

A novel glucose biosensor was constructed by electrochemical entrapment of glucose oxidase (GOD) into porous poly(acrylonitrile-co-acrylic acid), which was synthesized via radical polymerization of acrylonitrile and acrylic acid. The obtained biosensor showed a better stability and higher sensitivity than the biosensor prepared by simple physical adsorption. Effects of some experimental variables such as immobilization time, enzyme concentration, pH, applied potential, and temperature on the amperometric response of the sensor were investigated. The biosensor exhibited a rapid response to glucose (< 30s) with a linear range of 5 x 10(-6) to 3 x 10(-3)M and a sensitivity of 6.82 mAM(-1)cm(-2). The apparent Michaelis-Menten constant (K(M)(app)) was 7.3mM.     

On the complex formation of iron(III) bromide in the space-demanding solvent N,N′-dimethylpropyleneurea and the structure of the trisbromoiron(III) complex in solution and crystalline state

The complex formation between iron(III) and bromide has been studied calorimetrically in N,N′-dimethylpropyleneurea (DMPU), and the structure of the DMPU solvated tribromoiron(III) complex has been studied in solution by extended X-ray absorption fine structure (EXAFS) and large angle X-ray scattering (LAXS), and in solid state by EXAFS and single crystal X-ray diffraction. The calorimetric study showed that iron(III) forms three medium strong bromide complexes in DMPU, and the thermodynamic pattern strongly indicates that all complexes are formed in entropy driven substitution reactions. In DMPU solution, the tribromoiron(III) complex has a regular trigonal planar configuration with a mean Fe-Br bond distance of 2.36 Å, and without any solvent molecules strongly bound to iron(III). In the solid state, however, the structure is a slightly distorted trigonal bipyramid, with one short and two slightly longer Fe-Br bonds, 2.37 and 2.44 Å, respectively, in a somewhat distorted trigonal plane, and two DMPU solvent molecules (mean Fe-O bond distance 1.98 Å) in the apical positions. The DMPU solution of iron(III) bromide and the [FeBr₃(dmpu)₂] crystals are both blackish red.     

An amperometric glucose biosensor based on poly(o-aminophenol) and Prussian blue films at platinum electrode

Prussian blue (PB), as a good catalyst for the reduction of hydrogen peroxide, has been combined with nonconducting poly(o-aminophenol) (POAP) film to assemble glucose biosensor. Compared with PB-modified enzymatic biosensor, the biosensor based on glucose oxidase immobilized in POAP film at PB-modified electrode shows much improved stability (78% remains after 30 days) in neutral medium. Additionally, the biosensor, at an applied potential of 0.0 V, exhibits other good characteristics, such as relative low detection limit (0.01 mM), short response time (within 5s), large current density (0.28 mA/cm2), high sensitivity (24 mAM(-1)cm(-2)), and good antiinterferent ability. The apparent activation energy of enzyme-catalyzed reaction and apparent Michaelis-Menten constant are 34.2 KJmol(-1) and 10.5 mM, respectively. In addition, effects of temperature, applied potential used in the determination, pH value of the detection solution, and electroactive interferents on the amperometric response of the sensor were investigated and are discussed.     

Bridged dinucleating N-heterocyclic carbene ligands and their double helical mercury(II) complexes

A series of six 3,6-bis(imidazolium-3-yl)pyridazine derivatives with different imidazole-N substituents have been synthesized and isolated as the salts [H₂L]Cl₂ (1a)-(6a) and [H₂L](PF₆)₂ (1b)-(6b). Solid state structures have been determined crystallographically for eleven out of the twelve compounds, revealing diverse hydrogen bonding patterns that involve the imidazolium-C²H units and the anions. N-heterocyclic carbene (NHC) mercury(II) complexes [Hg₂L₂](PF₆)₄ (7)-(9) are readily formed in good yields from ligand precursors [H₂L](PF₆)₂ and Hg(OAc)₂, as long as imidazole-N substituents are not too bulky. X-ray crystallography reveals double helical bimetallic arrangements for the stable [Hg₂L₂]⁴⁺ cations. Ligand scrambling in [Hg₂L₂]⁴⁺ occurs only in the presence of free carbene precursor, presumably via an associative mechanism.